diff options
Diffstat (limited to 'Documentation/i2c/dev-interface.rst')
| -rw-r--r-- | Documentation/i2c/dev-interface.rst | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/Documentation/i2c/dev-interface.rst b/Documentation/i2c/dev-interface.rst index 69c23a3c2b1b..c3717a87df12 100644 --- a/Documentation/i2c/dev-interface.rst +++ b/Documentation/i2c/dev-interface.rst @@ -2,26 +2,26 @@ I2C Device Interface ==================== -Usually, i2c devices are controlled by a kernel driver. But it is also +Usually, I2C devices are controlled by a kernel driver. But it is also possible to access all devices on an adapter from userspace, through the /dev interface. You need to load module i2c-dev for this. -Each registered i2c adapter gets a number, counting from 0. You can +Each registered I2C adapter gets a number, counting from 0. You can examine /sys/class/i2c-dev/ to see what number corresponds to which adapter. Alternatively, you can run "i2cdetect -l" to obtain a formatted list of all -i2c adapters present on your system at a given time. i2cdetect is part of +I2C adapters present on your system at a given time. i2cdetect is part of the i2c-tools package. I2C device files are character device files with major device number 89 and a minor device number corresponding to the number assigned as explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ..., -i2c-10, ...). All 256 minor device numbers are reserved for i2c. +i2c-10, ...). All 256 minor device numbers are reserved for I2C. C example ========= -So let's say you want to access an i2c adapter from a C program. +So let's say you want to access an I2C adapter from a C program. First, you need to include these two headers:: #include <linux/i2c-dev.h> @@ -66,7 +66,7 @@ the device supports them. Both are illustrated below:: /* Using SMBus commands */ res = i2c_smbus_read_word_data(file, reg); if (res < 0) { - /* ERROR HANDLING: i2c transaction failed */ + /* ERROR HANDLING: I2C transaction failed */ } else { /* res contains the read word */ } @@ -79,12 +79,12 @@ the device supports them. Both are illustrated below:: buf[1] = 0x43; buf[2] = 0x65; if (write(file, buf, 3) != 3) { - /* ERROR HANDLING: i2c transaction failed */ + /* ERROR HANDLING: I2C transaction failed */ } /* Using I2C Read, equivalent of i2c_smbus_read_byte(file) */ if (read(file, buf, 1) != 1) { - /* ERROR HANDLING: i2c transaction failed */ + /* ERROR HANDLING: I2C transaction failed */ } else { /* buf[0] contains the read byte */ } @@ -144,7 +144,7 @@ The following IOCTLs are defined: If possible, use the provided ``i2c_smbus_*`` methods described below instead of issuing direct ioctls. -You can do plain i2c transactions by using read(2) and write(2) calls. +You can do plain I2C transactions by using read(2) and write(2) calls. You do not need to pass the address byte; instead, set it through ioctl I2C_SLAVE before you try to access the device. |