2 files changed, 3 insertions, 106 deletions
diff --git a/Documentation/input/devices/gpio-tilt.rst b/Documentation/input/devices/gpio-tilt.rst
deleted file mode 100644
index fa6e64570aa7..000000000000
--- a/Documentation/input/devices/gpio-tilt.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-Driver for tilt-switches connected via GPIOs
-============================================
-
-Generic driver to read data from tilt switches connected via gpios.
-Orientation can be provided by one or more than one tilt switches,
-i.e. each tilt switch providing one axis, and the number of axes
-is also not limited.
-
-
-Data structures
----------------
-
-The array of struct gpio in the gpios field is used to list the gpios
-that represent the current tilt state.
-
-The array of struct gpio_tilt_axis describes the axes that are reported
-to the input system. The values set therein are used for the
-input_set_abs_params calls needed to init the axes.
-
-The array of struct gpio_tilt_state maps gpio states to the corresponding
-values to report. The gpio state is represented as a bitfield where the
-bit-index corresponds to the index of the gpio in the struct gpio array.
-In the same manner the values stored in the axes array correspond to
-the elements of the gpio_tilt_axis-array.
-
-
-Example
--------
-
-Example configuration for a single TS1003 tilt switch that rotates around
-one axis in 4 steps and emits the current tilt via two GPIOs::
-
-    static int sg060_tilt_enable(struct device *dev) {
-	    /* code to enable the sensors */
-    };
-
-    static void sg060_tilt_disable(struct device *dev) {
-	    /* code to disable the sensors */
-    };
-
-    static struct gpio sg060_tilt_gpios[] = {
-	    { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
-	    { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
-    };
-
-    static struct gpio_tilt_state sg060_tilt_states[] = {
-	    {
-		    .gpios = (0 << 1) | (0 << 0),
-		    .axes = (int[]) {
-			    0,
-		    },
-	    }, {
-		    .gpios = (0 << 1) | (1 << 0),
-		    .axes = (int[]) {
-			    1, /* 90 degrees */
-		    },
-	    }, {
-		    .gpios = (1 << 1) | (1 << 0),
-		    .axes = (int[]) {
-			    2, /* 180 degrees */
-		    },
-	    }, {
-		    .gpios = (1 << 1) | (0 << 0),
-		    .axes = (int[]) {
-			    3, /* 270 degrees */
-		    },
-	    },
-    };
-
-    static struct gpio_tilt_axis sg060_tilt_axes[] = {
-	    {
-		    .axis = ABS_RY,
-		    .min = 0,
-		    .max = 3,
-		    .fuzz = 0,
-		    .flat = 0,
-	    },
-    };
-
-    static struct gpio_tilt_platform_data sg060_tilt_pdata= {
-	    .gpios = sg060_tilt_gpios,
-	    .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
-
-	    .axes = sg060_tilt_axes,
-	    .nr_axes = ARRAY_SIZE(sg060_tilt_axes),
-
-	    .states = sg060_tilt_states,
-	    .nr_states = ARRAY_SIZE(sg060_tilt_states),
-
-	    .debounce_interval = 100,
-
-	    .poll_interval = 1000,
-	    .enable = sg060_tilt_enable,
-	    .disable = sg060_tilt_disable,
-    };
-
-    static struct platform_device sg060_device_tilt = {
-	    .name = "gpio-tilt-polled",
-	    .id = -1,
-	    .dev = {
-		    .platform_data = &sg060_tilt_pdata,
-	    },
-    };
diff --git a/Documentation/input/devices/rotary-encoder.rst b/Documentation/input/devices/rotary-encoder.rst
index b07b20a295ac..810ae02bdaa0 100644
--- a/Documentation/input/devices/rotary-encoder.rst
+++ b/Documentation/input/devices/rotary-encoder.rst
@@ -108,9 +108,9 @@ example below:
 	};
 
 	static const struct property_entry rotary_encoder_properties[] __initconst = {
-		PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
-		PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, ABS_X),
-		PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 0),
+		PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+		PROPERTY_ENTRY_U32("linux,axis",		      ABS_X),
+		PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    0),
 		{ },
 	};