summaryrefslogtreecommitdiffstats
path: root/Documentation/kernel-parameters.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/kernel-parameters.txt')
-rw-r--r--Documentation/kernel-parameters.txt75
1 files changed, 71 insertions, 4 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cfcc73f2b822..c1601e5a8b71 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -713,6 +713,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
The filter can be disabled or changed to another
driver later using sysfs.
+ drm_kms_helper.edid_firmware=[<connector>:]<file>
+ Broken monitors, graphic adapters and KVMs may
+ send no or incorrect EDID data sets. This parameter
+ allows to specify an EDID data set in the
+ /lib/firmware directory that is used instead.
+ Generic built-in EDID data sets are used, if one of
+ edid/1024x768.bin, edid/1280x1024.bin,
+ edid/1680x1050.bin, or edid/1920x1080.bin is given
+ and no file with the same name exists. Details and
+ instructions how to build your own EDID data are
+ available in Documentation/EDID/HOWTO.txt. An EDID
+ data set will only be used for a particular connector,
+ if its name and a colon are prepended to the EDID
+ name.
+
dscc4.setup= [NET]
earlycon= [KNL] Output early console device and options.
@@ -1071,8 +1086,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
no_x2apic_optout
BIOS x2APIC opt-out request will be ignored
- inttest= [IA-64]
-
iomem= Disable strict checking of access to MMIO memory
strict regions from userspace.
relaxed
@@ -1657,6 +1670,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
of returning the full 64-bit number.
The default is to return 64-bit inode numbers.
+ nfs.max_session_slots=
+ [NFSv4.1] Sets the maximum number of session slots
+ the client will attempt to negotiate with the server.
+ This limits the number of simultaneous RPC requests
+ that the client can send to the NFSv4.1 server.
+ Note that there is little point in setting this
+ value higher than the max_tcp_slot_table_limit.
+
nfs.nfs4_disable_idmapping=
[NFSv4] When set to the default of '1', this option
ensures that both the RPC level authentication
@@ -1670,6 +1691,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
back to using the idmapper.
To turn off this behaviour, set the value to '0'.
+ nfs.send_implementation_id =
+ [NFSv4.1] Send client implementation identification
+ information in exchange_id requests.
+ If zero, no implementation identification information
+ will be sent.
+ The default is to send the implementation identification
+ information.
+
+ nfsd.nfs4_disable_idmapping=
+ [NFSv4] When set to the default of '1', the NFSv4
+ server will return only numeric uids and gids to
+ clients using auth_sys, and will accept numeric uids
+ and gids from such clients. This is intended to ease
+ migration from NFSv2/v3.
+
+ objlayoutdriver.osd_login_prog=
+ [NFS] [OBJLAYOUT] sets the pathname to the program which
+ is used to automatically discover and login into new
+ osd-targets. Please see:
+ Documentation/filesystems/pnfs.txt for more explanations
+
nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take
when a NMI is triggered.
Format: [state][,regs][,debounce][,die]
@@ -1833,6 +1875,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
shutdown the other cpus. Instead use the REBOOT_VECTOR
irq.
+ nomodule Disable module load
+
nopat [X86] Disable PAT (page attribute table extension of
pagetables) support.
@@ -2109,8 +2153,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
the default.
off: Turn ECRC off
on: Turn ECRC on.
- realloc reallocate PCI resources if allocations done by BIOS
- are erroneous.
+ realloc= Enable/disable reallocating PCI bridge resources
+ if allocations done by BIOS are too small to
+ accommodate resources required by all child
+ devices.
+ off: Turn realloc off
+ on: Turn realloc on
+ realloc same as realloc=on
+ noari do not use PCIe ARI.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
@@ -2118,6 +2168,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_hp= [PCIE] PCI Express Hotplug driver options:
+ nomsi Do not use MSI for PCI Express Native Hotplug (this
+ makes all PCIe ports use INTx for hotplug services).
+
pcie_ports= [PCIE] PCIe ports handling:
auto Ask the BIOS whether or not to use native PCIe services
associated with PCIe ports (PME, hot-plug, AER). Use
@@ -2211,6 +2265,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
default: off.
+ printk.always_kmsg_dump=
+ Trigger kmsg_dump for cases other than kernel oops or
+ panics
+ Format: <bool> (1/Y/y=enable, 0/N/n=disable)
+ default: disabled
+
printk.time= Show timing data prefixed to each printk message line
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
@@ -2629,6 +2689,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
to facilitate early boot debugging.
See also Documentation/trace/events.txt
+ transparent_hugepage=
+ [KNL]
+ Format: [always|madvise|never]
+ Can be used to control the default behavior of the system
+ with respect to transparent hugepages.
+ See Documentation/vm/transhuge.txt for more details.
+
tsc= Disable clocksource stability checks for TSC.
Format: <string>
[x86] reliable: mark tsc clocksource as reliable, this