diff options
Diffstat (limited to 'Documentation/leds/leds-lp5521.txt')
| -rw-r--r-- | Documentation/leds/leds-lp5521.txt | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt index c4d8d151e0fe..0e542ab3d4a0 100644 --- a/Documentation/leds/leds-lp5521.txt +++ b/Documentation/leds/leds-lp5521.txt @@ -43,17 +43,23 @@ Format: 10x mA i.e 10 means 1.0 mA example platform data: Note: chan_nr can have values between 0 and 2. +The name of each channel can be configurable. +If the name field is not defined, the default name will be set to 'xxxx:channelN' +(XXXX : pdata->label or i2c client name, N : channel number) static struct lp5521_led_config lp5521_led_config[] = { { + .name = "red", .chan_nr = 0, .led_current = 50, .max_current = 130, }, { + .name = "green", .chan_nr = 1, .led_current = 0, .max_current = 130, }, { + .name = "blue", .chan_nr = 2, .led_current = 0, .max_current = 130, @@ -86,3 +92,60 @@ static struct lp5521_platform_data lp5521_platform_data = { If the current is set to 0 in the platform data, that channel is disabled and it is not visible in the sysfs. + +The 'update_config' : CONFIG register (ADDR 08h) +This value is platform-specific data. +If update_config is not defined, the CONFIG register is set with +'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'. +(Enable auto-powersave, set charge pump to auto, red to battery) + +example of update_config : + +#define LP5521_CONFIGS (LP5521_PWM_HF | LP5521_PWRSAVE_EN | \ + LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \ + LP5521_CLK_INT) + +static struct lp5521_platform_data lp5521_pdata = { + .led_config = lp5521_led_config, + .num_channels = ARRAY_SIZE(lp5521_led_config), + .clock_mode = LP5521_CLOCK_INT, + .update_config = LP5521_CONFIGS, +}; + +LED patterns : LP5521 has autonomous operation without external control. +Pattern data can be defined in the platform data. + +example of led pattern data : + +/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */ +static u8 pattern_red[] = { + 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, + }; + +static u8 pattern_green[] = { + 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, + }; + +static struct lp5521_led_pattern board_led_patterns[] = { + { + .r = pattern_red, + .g = pattern_green, + .size_r = ARRAY_SIZE(pattern_red), + .size_g = ARRAY_SIZE(pattern_green), + }, +}; + +static struct lp5521_platform_data lp5521_platform_data = { + .led_config = lp5521_led_config, + .num_channels = ARRAY_SIZE(lp5521_led_config), + .clock_mode = LP5521_CLOCK_EXT, + .patterns = board_led_patterns, + .num_patterns = ARRAY_SIZE(board_led_patterns), +}; + +Then predefined led pattern(s) can be executed via the sysfs. +To start the pattern #1, +# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern +(xxxx : i2c bus & slave address) +To end the pattern, +# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern |