diff options
Diffstat (limited to 'Documentation/networking/devlink-params.txt')
| -rw-r--r-- | Documentation/networking/devlink-params.txt | 71 |
1 files changed, 0 insertions, 71 deletions
diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt deleted file mode 100644 index 04e234e9acc9..000000000000 --- a/Documentation/networking/devlink-params.txt +++ /dev/null @@ -1,71 +0,0 @@ -Devlink configuration parameters -================================ -Following is the list of configuration parameters via devlink interface. -Each parameter can be generic or driver specific and are device level -parameters. - -Note that the driver-specific files should contain the generic params -they support to, with supported config modes. - -Each parameter can be set in different configuration modes: - runtime - set while driver is running, no reset required. - driverinit - applied while driver initializes, requires restart - driver by devlink reload command. - permanent - written to device's non-volatile memory, hard reset - required. - -Following is the list of parameters: -==================================== -enable_sriov [DEVICE, GENERIC] - Enable Single Root I/O Virtualisation (SRIOV) in - the device. - Type: Boolean - -ignore_ari [DEVICE, GENERIC] - Ignore Alternative Routing-ID Interpretation (ARI) - capability. If enabled, adapter will ignore ARI - capability even when platforms has the support - enabled and creates same number of partitions when - platform does not support ARI. - Type: Boolean - -msix_vec_per_pf_max [DEVICE, GENERIC] - Provides the maximum number of MSIX interrupts that - a device can create. Value is same across all - physical functions (PFs) in the device. - Type: u32 - -msix_vec_per_pf_min [DEVICE, GENERIC] - Provides the minimum number of MSIX interrupts required - for the device initialization. Value is same across all - physical functions (PFs) in the device. - Type: u32 - -fw_load_policy [DEVICE, GENERIC] - Controls the device's firmware loading policy. - Valid values: - * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0) - Load firmware version preferred by the driver. - * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1) - Load firmware currently stored in flash. - * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DISK (2) - Load firmware currently available on host's disk. - Type: u8 - -reset_dev_on_drv_probe [DEVICE, GENERIC] - Controls the device's reset policy on driver probe. - Valid values: - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_UNKNOWN (0) - Unknown or invalid value. - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_ALWAYS (1) - Always reset device on driver probe. - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_NEVER (2) - Never reset device on driver probe. - * DEVLINK_PARAM_RESET_DEV_ON_DRV_PROBE_VALUE_DISK (3) - Reset only if device firmware can be found in the - filesystem. - Type: u8 - -enable_roce [DEVICE, GENERIC] - Enable handling of RoCE traffic in the device. - Type: Boolean |