summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/packet_mmap.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/packet_mmap.txt')
-rw-r--r--Documentation/networking/packet_mmap.txt399
1 files changed, 399 insertions, 0 deletions
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
new file mode 100644
index 000000000000..8d4cf78258e4
--- /dev/null
+++ b/Documentation/networking/packet_mmap.txt
@@ -0,0 +1,399 @@
+--------------------------------------------------------------------------------
++ ABSTRACT
+--------------------------------------------------------------------------------
+
+This file documents the CONFIG_PACKET_MMAP option available with the PACKET
+socket interface on 2.4 and 2.6 kernels. This type of sockets is used for
+capture network traffic with utilities like tcpdump or any other that uses
+the libpcap library.
+
+You can find the latest version of this document at
+
+ http://pusa.uv.es/~ulisses/packet_mmap/
+
+Please send me your comments to
+
+ Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es>
+
+-------------------------------------------------------------------------------
++ Why use PACKET_MMAP
+--------------------------------------------------------------------------------
+
+In Linux 2.4/2.6 if PACKET_MMAP is not enabled, the capture process is very
+inefficient. It uses very limited buffers and requires one system call
+to capture each packet, it requires two if you want to get packet's
+timestamp (like libpcap always does).
+
+In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size
+configurable circular buffer mapped in user space. This way reading packets just
+needs to wait for them, most of the time there is no need to issue a single
+system call. By using a shared buffer between the kernel and the user
+also has the benefit of minimizing packet copies.
+
+It's fine to use PACKET_MMAP to improve the performance of the capture process,
+but it isn't everything. At least, if you are capturing at high speeds (this
+is relative to the cpu speed), you should check if the device driver of your
+network interface card supports some sort of interrupt load mitigation or
+(even better) if it supports NAPI, also make sure it is enabled.
+
+--------------------------------------------------------------------------------
++ How to use CONFIG_PACKET_MMAP
+--------------------------------------------------------------------------------
+
+From the user standpoint, you should use the higher level libpcap library, wich
+is a de facto standard, portable across nearly all operating systems
+including Win32.
+
+Said that, at time of this writing, official libpcap 0.8.1 is out and doesn't include
+support for PACKET_MMAP, and also probably the libpcap included in your distribution.
+
+I'm aware of two implementations of PACKET_MMAP in libpcap:
+
+ http://pusa.uv.es/~ulisses/packet_mmap/ (by Simon Patarin, based on libpcap 0.6.2)
+ http://public.lanl.gov/cpw/ (by Phil Wood, based on lastest libpcap)
+
+The rest of this document is intended for people who want to understand
+the low level details or want to improve libpcap by including PACKET_MMAP
+support.
+
+--------------------------------------------------------------------------------
++ How to use CONFIG_PACKET_MMAP directly
+--------------------------------------------------------------------------------
+
+From the system calls stand point, the use of PACKET_MMAP involves
+the following process:
+
+
+[setup] socket() -------> creation of the capture socket
+ setsockopt() ---> allocation of the circular buffer (ring)
+ mmap() ---------> maping of the allocated buffer to the
+ user process
+
+[capture] poll() ---------> to wait for incoming packets
+
+[shutdown] close() --------> destruction of the capture socket and
+ deallocation of all associated
+ resources.
+
+
+socket creation and destruction is straight forward, and is done
+the same way with or without PACKET_MMAP:
+
+int fd;
+
+fd= socket(PF_PACKET, mode, htons(ETH_P_ALL))
+
+where mode is SOCK_RAW for the raw interface were link level
+information can be captured or SOCK_DGRAM for the cooked
+interface where link level information capture is not
+supported and a link level pseudo-header is provided
+by the kernel.
+
+The destruction of the socket and all associated resources
+is done by a simple call to close(fd).
+
+Next I will describe PACKET_MMAP settings and it's constraints,
+also the maping of the circular buffer in the user process and
+the use of this buffer.
+
+--------------------------------------------------------------------------------
++ PACKET_MMAP settings
+--------------------------------------------------------------------------------
+
+
+To setup PACKET_MMAP from user level code is done with a call like
+
+ setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
+
+The most significant argument in the previous call is the req parameter,
+this parameter must to have the following structure:
+
+ struct tpacket_req
+ {
+ unsigned int tp_block_size; /* Minimal size of contiguous block */
+ unsigned int tp_block_nr; /* Number of blocks */
+ unsigned int tp_frame_size; /* Size of frame */
+ unsigned int tp_frame_nr; /* Total number of frames */
+ };
+
+This structure is defined in /usr/include/linux/if_packet.h and establishes a
+circular buffer (ring) of unswappable memory mapped in the capture process.
+Being mapped in the capture process allows reading the captured frames and
+related meta-information like timestamps without requiring a system call.
+
+Captured frames are grouped in blocks. Each block is a physically contiguous
+region of memory and holds tp_block_size/tp_frame_size frames. The total number
+of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because
+
+ frames_per_block = tp_block_size/tp_frame_size
+
+indeed, packet_set_ring checks that the following condition is true
+
+ frames_per_block * tp_block_nr == tp_frame_nr
+
+
+Lets see an example, with the following values:
+
+ tp_block_size= 4096
+ tp_frame_size= 2048
+ tp_block_nr = 4
+ tp_frame_nr = 8
+
+we will get the following buffer structure:
+
+ block #1 block #2
++---------+---------+ +---------+---------+
+| frame 1 | frame 2 | | frame 3 | frame 4 |
++---------+---------+ +---------+---------+
+
+ block #3 block #4
++---------+---------+ +---------+---------+
+| frame 5 | frame 6 | | frame 7 | frame 8 |
++---------+---------+ +---------+---------+
+
+A frame can be of any size with the only condition it can fit in a block. A block
+can only hold an integer number of frames, or in other words, a frame cannot
+be spawn accross two blocks so there are some datails you have to take into
+account when choosing the frame_size. See "Maping and use of the circular
+buffer (ring)".
+
+
+--------------------------------------------------------------------------------
++ PACKET_MMAP setting constraints
+--------------------------------------------------------------------------------
+
+In kernel versions prior to 2.4.26 (for the 2.4 branch) and 2.6.5 (2.6 branch),
+the PACKET_MMAP buffer could hold only 32768 frames in a 32 bit architecture or
+16384 in a 64 bit architecture. For information on these kernel versions
+see http://pusa.uv.es/~ulisses/packet_mmap/packet_mmap.pre-2.4.26_2.6.5.txt
+
+ Block size limit
+------------------
+
+As stated earlier, each block is a contiguous physical region of memory. These
+memory regions are allocated with calls to the __get_free_pages() function. As
+the name indicates, this function allocates pages of memory, and the second
+argument is "order" or a power of two number of pages, that is
+(for PAGE_SIZE == 4096) order=0 ==> 4096 bytes, order=1 ==> 8192 bytes,
+order=2 ==> 16384 bytes, etc. The maximum size of a
+region allocated by __get_free_pages is determined by the MAX_ORDER macro. More
+precisely the limit can be calculated as:
+
+ PAGE_SIZE << MAX_ORDER
+
+ In a i386 architecture PAGE_SIZE is 4096 bytes
+ In a 2.4/i386 kernel MAX_ORDER is 10
+ In a 2.6/i386 kernel MAX_ORDER is 11
+
+So get_free_pages can allocate as much as 4MB or 8MB in a 2.4/2.6 kernel
+respectively, with an i386 architecture.
+
+User space programs can include /usr/include/sys/user.h and
+/usr/include/linux/mmzone.h to get PAGE_SIZE MAX_ORDER declarations.
+
+The pagesize can also be determined dynamically with the getpagesize (2)
+system call.
+
+
+ Block number limit
+--------------------
+
+To understand the constraints of PACKET_MMAP, we have to see the structure
+used to hold the pointers to each block.
+
+Currently, this structure is a dynamically allocated vector with kmalloc
+called pg_vec, its size limits the number of blocks that can be allocated.
+
+ +---+---+---+---+
+ | x | x | x | x |
+ +---+---+---+---+
+ | | | |
+ | | | v
+ | | v block #4
+ | v block #3
+ v block #2
+ block #1
+
+
+kmalloc allocates any number of bytes of phisically contiguous memory from
+a pool of pre-determined sizes. This pool of memory is mantained by the slab
+allocator wich is at the end the responsible for doing the allocation and
+hence wich imposes the maximum memory that kmalloc can allocate.
+
+In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The
+predetermined sizes that kmalloc uses can be checked in the "size-<bytes>"
+entries of /proc/slabinfo
+
+In a 32 bit architecture, pointers are 4 bytes long, so the total number of
+pointers to blocks is
+
+ 131072/4 = 32768 blocks
+
+
+ PACKET_MMAP buffer size calculator
+------------------------------------
+
+Definitions:
+
+<size-max> : is the maximum size of allocable with kmalloc (see /proc/slabinfo)
+<pointer size>: depends on the architecture -- sizeof(void *)
+<page size> : depends on the architecture -- PAGE_SIZE or getpagesize (2)
+<max-order> : is the value defined with MAX_ORDER
+<frame size> : it's an upper bound of frame's capture size (more on this later)
+
+from these definitions we will derive
+
+ <block number> = <size-max>/<pointer size>
+ <block size> = <pagesize> << <max-order>
+
+so, the max buffer size is
+
+ <block number> * <block size>
+
+and, the number of frames be
+
+ <block number> * <block size> / <frame size>
+
+Suposse the following parameters, wich apply for 2.6 kernel and an
+i386 architecture:
+
+ <size-max> = 131072 bytes
+ <pointer size> = 4 bytes
+ <pagesize> = 4096 bytes
+ <max-order> = 11
+
+and a value for <frame size> of 2048 byteas. These parameters will yield
+
+ <block number> = 131072/4 = 32768 blocks
+ <block size> = 4096 << 11 = 8 MiB.
+
+and hence the buffer will have a 262144 MiB size. So it can hold
+262144 MiB / 2048 bytes = 134217728 frames
+
+
+Actually, this buffer size is not possible with an i386 architecture.
+Remember that the memory is allocated in kernel space, in the case of
+an i386 kernel's memory size is limited to 1GiB.
+
+All memory allocations are not freed until the socket is closed. The memory
+allocations are done with GFP_KERNEL priority, this basically means that
+the allocation can wait and swap other process' memory in order to allocate
+the nececessary memory, so normally limits can be reached.
+
+ Other constraints
+-------------------
+
+If you check the source code you will see that what I draw here as a frame
+is not only the link level frame. At the begining of each frame there is a
+header called struct tpacket_hdr used in PACKET_MMAP to hold link level's frame
+meta information like timestamp. So what we draw here a frame it's really
+the following (from include/linux/if_packet.h):
+
+/*
+ Frame structure:
+
+ - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
+ - struct tpacket_hdr
+ - pad to TPACKET_ALIGNMENT=16
+ - struct sockaddr_ll
+ - Gap, chosen so that packet data (Start+tp_net) alignes to
+ TPACKET_ALIGNMENT=16
+ - Start+tp_mac: [ Optional MAC header ]
+ - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
+ - Pad to align to TPACKET_ALIGNMENT=16
+ */
+
+
+ The following are conditions that are checked in packet_set_ring
+
+ tp_block_size must be a multiple of PAGE_SIZE (1)
+ tp_frame_size must be greater than TPACKET_HDRLEN (obvious)
+ tp_frame_size must be a multiple of TPACKET_ALIGNMENT
+ tp_frame_nr must be exactly frames_per_block*tp_block_nr
+
+Note that tp_block_size should be choosed to be a power of two or there will
+be a waste of memory.
+
+--------------------------------------------------------------------------------
++ Maping and use of the circular buffer (ring)
+--------------------------------------------------------------------------------
+
+The maping of the buffer in the user process is done with the conventional
+mmap function. Even the circular buffer is compound of several physically
+discontiguous blocks of memory, they are contiguous to the user space, hence
+just one call to mmap is needed:
+
+ mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+
+If tp_frame_size is a divisor of tp_block_size frames will be
+contiguosly spaced by tp_frame_size bytes. If not, each
+tp_block_size/tp_frame_size frames there will be a gap between
+the frames. This is because a frame cannot be spawn across two
+blocks.
+
+At the beginning of each frame there is an status field (see
+struct tpacket_hdr). If this field is 0 means that the frame is ready
+to be used for the kernel, If not, there is a frame the user can read
+and the following flags apply:
+
+ from include/linux/if_packet.h
+
+ #define TP_STATUS_COPY 2
+ #define TP_STATUS_LOSING 4
+ #define TP_STATUS_CSUMNOTREADY 8
+
+
+TP_STATUS_COPY : This flag indicates that the frame (and associated
+ meta information) has been truncated because it's
+ larger than tp_frame_size. This packet can be
+ read entirely with recvfrom().
+
+ In order to make this work it must to be
+ enabled previously with setsockopt() and
+ the PACKET_COPY_THRESH option.
+
+ The number of frames than can be buffered to
+ be read with recvfrom is limited like a normal socket.
+ See the SO_RCVBUF option in the socket (7) man page.
+
+TP_STATUS_LOSING : indicates there were packet drops from last time
+ statistics where checked with getsockopt() and
+ the PACKET_STATISTICS option.
+
+TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets wich
+ it's checksum will be done in hardware. So while
+ reading the packet we should not try to check the
+ checksum.
+
+for convenience there are also the following defines:
+
+ #define TP_STATUS_KERNEL 0
+ #define TP_STATUS_USER 1
+
+The kernel initializes all frames to TP_STATUS_KERNEL, when the kernel
+receives a packet it puts in the buffer and updates the status with
+at least the TP_STATUS_USER flag. Then the user can read the packet,
+once the packet is read the user must zero the status field, so the kernel
+can use again that frame buffer.
+
+The user can use poll (any other variant should apply too) to check if new
+packets are in the ring:
+
+ struct pollfd pfd;
+
+ pfd.fd = fd;
+ pfd.revents = 0;
+ pfd.events = POLLIN|POLLRDNORM|POLLERR;
+
+ if (status == TP_STATUS_KERNEL)
+ retval = poll(&pfd, 1, timeout);
+
+It doesn't incur in a race condition to first check the status value and
+then poll for frames.
+
+--------------------------------------------------------------------------------
++ THANKS
+--------------------------------------------------------------------------------
+
+ Jesse Brandeburg, for fixing my grammathical/spelling errors
+