summaryrefslogtreecommitdiffstats
path: root/Documentation/nommu-mmap.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/nommu-mmap.txt')
-rw-r--r--Documentation/nommu-mmap.txt198
1 files changed, 198 insertions, 0 deletions
diff --git a/Documentation/nommu-mmap.txt b/Documentation/nommu-mmap.txt
new file mode 100644
index 000000000000..b88ebe4d808c
--- /dev/null
+++ b/Documentation/nommu-mmap.txt
@@ -0,0 +1,198 @@
+ =============================
+ NO-MMU MEMORY MAPPING SUPPORT
+ =============================
+
+The kernel has limited support for memory mapping under no-MMU conditions, such
+as are used in uClinux environments. From the userspace point of view, memory
+mapping is made use of in conjunction with the mmap() system call, the shmat()
+call and the execve() system call. From the kernel's point of view, execve()
+mapping is actually performed by the binfmt drivers, which call back into the
+mmap() routines to do the actual work.
+
+Memory mapping behaviour also involves the way fork(), vfork(), clone() and
+ptrace() work. Under uClinux there is no fork(), and clone() must be supplied
+the CLONE_VM flag.
+
+The behaviour is similar between the MMU and no-MMU cases, but not identical;
+and it's also much more restricted in the latter case:
+
+ (*) Anonymous mapping, MAP_PRIVATE
+
+ In the MMU case: VM regions backed by arbitrary pages; copy-on-write
+ across fork.
+
+ In the no-MMU case: VM regions backed by arbitrary contiguous runs of
+ pages.
+
+ (*) Anonymous mapping, MAP_SHARED
+
+ These behave very much like private mappings, except that they're
+ shared across fork() or clone() without CLONE_VM in the MMU case. Since
+ the no-MMU case doesn't support these, behaviour is identical to
+ MAP_PRIVATE there.
+
+ (*) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, !PROT_WRITE
+
+ In the MMU case: VM regions backed by pages read from file; changes to
+ the underlying file are reflected in the mapping; copied across fork.
+
+ In the no-MMU case:
+
+ - If one exists, the kernel will re-use an existing mapping to the
+ same segment of the same file if that has compatible permissions,
+ even if this was created by another process.
+
+ - If possible, the file mapping will be directly on the backing device
+ if the backing device has the BDI_CAP_MAP_DIRECT capability and
+ appropriate mapping protection capabilities. Ramfs, romfs, cramfs
+ and mtd might all permit this.
+
+ - If the backing device device can't or won't permit direct sharing,
+ but does have the BDI_CAP_MAP_COPY capability, then a copy of the
+ appropriate bit of the file will be read into a contiguous bit of
+ memory and any extraneous space beyond the EOF will be cleared
+
+ - Writes to the file do not affect the mapping; writes to the mapping
+ are visible in other processes (no MMU protection), but should not
+ happen.
+
+ (*) File, MAP_PRIVATE, PROT_READ / PROT_EXEC, PROT_WRITE
+
+ In the MMU case: like the non-PROT_WRITE case, except that the pages in
+ question get copied before the write actually happens. From that point
+ on writes to the file underneath that page no longer get reflected into
+ the mapping's backing pages. The page is then backed by swap instead.
+
+ In the no-MMU case: works much like the non-PROT_WRITE case, except
+ that a copy is always taken and never shared.
+
+ (*) Regular file / blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+
+ In the MMU case: VM regions backed by pages read from file; changes to
+ pages written back to file; writes to file reflected into pages backing
+ mapping; shared across fork.
+
+ In the no-MMU case: not supported.
+
+ (*) Memory backed regular file, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+
+ In the MMU case: As for ordinary regular files.
+
+ In the no-MMU case: The filesystem providing the memory-backed file
+ (such as ramfs or tmpfs) may choose to honour an open, truncate, mmap
+ sequence by providing a contiguous sequence of pages to map. In that
+ case, a shared-writable memory mapping will be possible. It will work
+ as for the MMU case. If the filesystem does not provide any such
+ support, then the mapping request will be denied.
+
+ (*) Memory backed blockdev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+
+ In the MMU case: As for ordinary regular files.
+
+ In the no-MMU case: As for memory backed regular files, but the
+ blockdev must be able to provide a contiguous run of pages without
+ truncate being called. The ramdisk driver could do this if it allocated
+ all its memory as a contiguous array upfront.
+
+ (*) Memory backed chardev, MAP_SHARED, PROT_READ / PROT_EXEC / PROT_WRITE
+
+ In the MMU case: As for ordinary regular files.
+
+ In the no-MMU case: The character device driver may choose to honour
+ the mmap() by providing direct access to the underlying device if it
+ provides memory or quasi-memory that can be accessed directly. Examples
+ of such are frame buffers and flash devices. If the driver does not
+ provide any such support, then the mapping request will be denied.
+
+
+============================
+FURTHER NOTES ON NO-MMU MMAP
+============================
+
+ (*) A request for a private mapping of less than a page in size may not return
+ a page-aligned buffer. This is because the kernel calls kmalloc() to
+ allocate the buffer, not get_free_page().
+
+ (*) A list of all the mappings on the system is visible through /proc/maps in
+ no-MMU mode.
+
+ (*) Supplying MAP_FIXED or a requesting a particular mapping address will
+ result in an error.
+
+ (*) Files mapped privately usually have to have a read method provided by the
+ driver or filesystem so that the contents can be read into the memory
+ allocated if mmap() chooses not to map the backing device directly. An
+ error will result if they don't. This is most likely to be encountered
+ with character device files, pipes, fifos and sockets.
+
+============================================
+PROVIDING SHAREABLE CHARACTER DEVICE SUPPORT
+============================================
+
+To provide shareable character device support, a driver must provide a
+file->f_op->get_unmapped_area() operation. The mmap() routines will call this
+to get a proposed address for the mapping. This may return an error if it
+doesn't wish to honour the mapping because it's too long, at a weird offset,
+under some unsupported combination of flags or whatever.
+
+The driver should also provide backing device information with capabilities set
+to indicate the permitted types of mapping on such devices. The default is
+assumed to be readable and writable, not executable, and only shareable
+directly (can't be copied).
+
+The file->f_op->mmap() operation will be called to actually inaugurate the
+mapping. It can be rejected at that point. Returning the ENOSYS error will
+cause the mapping to be copied instead if BDI_CAP_MAP_COPY is specified.
+
+The vm_ops->close() routine will be invoked when the last mapping on a chardev
+is removed. An existing mapping will be shared, partially or not, if possible
+without notifying the driver.
+
+It is permitted also for the file->f_op->get_unmapped_area() operation to
+return -ENOSYS. This will be taken to mean that this operation just doesn't
+want to handle it, despite the fact it's got an operation. For instance, it
+might try directing the call to a secondary driver which turns out not to
+implement it. Such is the case for the framebuffer driver which attempts to
+direct the call to the device-specific driver. Under such circumstances, the
+mapping request will be rejected if BDI_CAP_MAP_COPY is not specified, and a
+copy mapped otherwise.
+
+IMPORTANT NOTE:
+
+ Some types of device may present a different appearance to anyone
+ looking at them in certain modes. Flash chips can be like this; for
+ instance if they're in programming or erase mode, you might see the
+ status reflected in the mapping, instead of the data.
+
+ In such a case, care must be taken lest userspace see a shared or a
+ private mapping showing such information when the driver is busy
+ controlling the device. Remember especially: private executable
+ mappings may still be mapped directly off the device under some
+ circumstances!
+
+
+==============================================
+PROVIDING SHAREABLE MEMORY-BACKED FILE SUPPORT
+==============================================
+
+Provision of shared mappings on memory backed files is similar to the provision
+of support for shared mapped character devices. The main difference is that the
+filesystem providing the service will probably allocate a contiguous collection
+of pages and permit mappings to be made on that.
+
+It is recommended that a truncate operation applied to such a file that
+increases the file size, if that file is empty, be taken as a request to gather
+enough pages to honour a mapping. This is required to support POSIX shared
+memory.
+
+Memory backed devices are indicated by the mapping's backing device info having
+the memory_backed flag set.
+
+
+========================================
+PROVIDING SHAREABLE BLOCK DEVICE SUPPORT
+========================================
+
+Provision of shared mappings on block device files is exactly the same as for
+character devices. If there isn't a real device underneath, then the driver
+should allocate sufficient contiguous memory to honour any supported mapping.