1 files changed, 0 insertions, 76 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
deleted file mode 100644
index edb7ae19e868..000000000000
--- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* MDIO IO device
-
-The MDIO is a bus to which the PHY devices are connected.  For each
-device that exists on this bus, a child node should be created.  See
-the definition of the PHY node in booting-without-of.txt for an example
-of how to define a PHY.
-
-Required properties:
-  - reg : Offset and length of the register set for the device
-  - compatible : Should define the compatible device type for the
-    mdio.  Currently, this is most likely to be "fsl,gianfar-mdio"
-
-Example:
-
-	mdio@24520 {
-		reg = <24520 20>;
-		compatible = "fsl,gianfar-mdio";
-
-		ethernet-phy@0 {
-			......
-		};
-	};
-
-* TBI Internal MDIO bus
-
-As of this writing, every tsec is associated with an internal TBI PHY.
-This PHY is accessed through the local MDIO bus.  These buses are defined
-similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
-The TBI PHYs underneath them are similar to normal PHYs, but the reg property
-is considered instructive, rather than descriptive.  The reg property should
-be chosen so it doesn't interfere with other PHYs on the bus.
-
-* Gianfar-compatible ethernet nodes
-
-Properties:
-
-  - device_type : Should be "network"
-  - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
-  - compatible : Should be "gianfar"
-  - reg : Offset and length of the register set for the device
-  - local-mac-address : List of bytes representing the ethernet address of
-    this controller
-  - interrupts : For FEC devices, the first interrupt is the device's
-    interrupt.  For TSEC and eTSEC devices, the first interrupt is
-    transmit, the second is receive, and the third is error.
-  - phy-handle : The phandle for the PHY connected to this ethernet
-    controller.
-  - fixed-link : <a b c d e> where a is emulated phy id - choose any,
-    but unique to the all specified fixed-links, b is duplex - 0 half,
-    1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
-    pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
-  - phy-connection-type : a string naming the controller/PHY interface type,
-    i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
-    "tbi", or "rtbi".  This property is only really needed if the connection
-    is of type "rgmii-id", as all other connection types are detected by
-    hardware.
-  - fsl,magic-packet : If present, indicates that the hardware supports
-    waking up via magic packet.
-  - bd-stash : If present, indicates that the hardware supports stashing
-    buffer descriptors in the L2.
-  - rx-stash-len : Denotes the number of bytes of a received buffer to stash
-    in the L2.
-  - rx-stash-idx : Denotes the index of the first byte from the received
-    buffer to stash in the L2.
-
-Example:
-	ethernet@24000 {
-		device_type = "network";
-		model = "TSEC";
-		compatible = "gianfar";
-		reg = <0x24000 0x1000>;
-		local-mac-address = [ 00 E0 0C 00 73 00 ];
-		interrupts = <29 2 30 2 34 2>;
-		interrupt-parent = <&mpic>;
-		phy-handle = <&phy0>
-	};