diff options
Diffstat (limited to 'Documentation/powerpc')
| -rw-r--r-- | Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt index d015dcec4011..b0019eb5330e 100644 --- a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt +++ b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt @@ -11,7 +11,7 @@ Required properties: 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - - interrupts : Interrupt mapping for GPIO IRQ (currently unused). + - interrupts : Interrupt mapping for GPIO IRQ. - interrupt-parent : Phandle for the interrupt controller that services interrupts for this device. - gpio-controller : Marks the port as GPIO controller. @@ -38,3 +38,23 @@ Example of gpio-controller nodes for a MPC8347 SoC: See booting-without-of.txt for details of how to specify GPIO information for devices. + +To use GPIO pins as interrupt sources for peripherals, specify the +GPIO controller as the interrupt parent and define GPIO number + +trigger mode using the interrupts property, which is defined like +this: + +interrupts = <number trigger>, where: + - number: GPIO pin (0..31) + - trigger: trigger mode: + 2 = trigger on falling edge + 3 = trigger on both edges + +Example of device using this is: + + funkyfpga@0 { + compatible = "funky-fpga"; + ... + interrupts = <4 3>; + interrupt-parent = <&gpio1>; + }; |