diff options
Diffstat (limited to 'Documentation/scsi/ChangeLog.1992-1997')
| -rw-r--r-- | Documentation/scsi/ChangeLog.1992-1997 | 2023 |
1 files changed, 0 insertions, 2023 deletions
diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997 deleted file mode 100644 index 6faad7e6417c..000000000000 --- a/Documentation/scsi/ChangeLog.1992-1997 +++ /dev/null @@ -1,2023 +0,0 @@ -Sat Jan 18 15:51:45 1997 Richard Henderson <rth@tamu.edu> - - * Don't play with usage_count directly, instead hand around - the module header and use the module macros. - -Fri May 17 00:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com> - - * BusLogic Driver Version 2.0.3 Released. - -Tue Apr 16 21:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com> - - * BusLogic Driver Version 1.3.2 Released. - -Sun Dec 31 23:26:00 1995 Leonard N. Zubkoff <lnz@dandelion.com> - - * BusLogic Driver Version 1.3.1 Released. - -Fri Nov 10 15:29:49 1995 Leonard N. Zubkoff <lnz@dandelion.com> - - * Released new BusLogic driver. - -Wed Aug 9 22:37:04 1995 Andries Brouwer <aeb@cwi.nl> - - As a preparation for new device code, separated the various - functions the request->dev field had into the device proper, - request->rq_dev and a status field request->rq_status. - - The 2nd argument of bios_param is now a kdev_t. - -Wed Jul 19 10:43:15 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all - attached devices. - - * scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and - eata_dma_proc.c to produce some device info for /proc/scsi. - - * eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done): - Changed handling of internal SCSI commands send to the HBA. - - -Wed Jul 19 10:09:17 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * Linux 1.3.11 released. - - * eata_dma.c (eata_queue)(eata_int_handler): Added code to do - command latency measurements if requested by root through - /proc/scsi interface. - Throughout Use HZ constant for time references. - - * eata_pio.c: Use HZ constant for time references. - - * aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD - to GNU style. - - * scsi.h: Added READ_12 command opcode constant - -Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * Linux 1.3.10 released. - - * scsi_proc.c (dispatch_scsi_info): Removed unused variable. - -Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * Linux 1.3.9 released. - - * scsi.c Blacklist concept expanded to 'support' more device - deficiencies. blacklist[] renamed to device_list[] - (scan_scsis): Code cleanup. - - * scsi_debug.c (scsi_debug_proc_info): Added support to control - device lockup simulation via /proc/scsi interface. - - -Wed Jul 19 09:22:34 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * Linux 1.3.7 released. - - * scsi_proc.c: Fixed a number of bugs in directory handling - -Wed Jul 19 09:18:28 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * Linux 1.3.5 released. - - * Native wide, multichannel and /proc/scsi support now in official - kernel distribution. - - * scsi.c/h, hosts.c/h et al reindented to increase readability - (especially on 80 column wide terminals). - - * scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added - /proc/scsi/scsi which allows root to scan for hotplugged devices. - - * scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi. - (scan_scsis): Added some 'spaghetti' code to allow scanning for - single devices. - - -Thu Jun 20 15:20:27 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * proc.c: Renamed to scsi_proc.c - -Mon Jun 12 20:32:45 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * Linux 1.3.0 released. - -Mon May 15 19:33:14 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * scsi.c: Added native multichannel and wide scsi support. - - * proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries): - Updated /proc/scsi interface. - -Thu May 4 17:58:48 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de> - - * sd.c (requeue_sd_request): Zero out the scatterlist only if - scsi_malloc returned memory for it. - - * eata_dma.c (register_HBA) (eata_queue): Add support for - large scatter/gather tables and set use_clustering accordingly - - * hosts.c: Make use_clustering changeable in the Scsi_Host structure. - -Wed Apr 12 15:25:52 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.5 released. - - * buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff). - Fixed interrupt routine to avoid races when handling multiple - complete commands per interrupt. Seems to come up with faster - cards. - - * eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling - throughout and fixed bug interrupt routine which resulted in shifted - status bytes. Added blink LED state checks for ISA and EISA HBAs. - Memory management bug seems to have disappeared ==> increasing - C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for - performance reasons. - - * scsi.c: If we get a FMK, EOM, or ILI when attempting to scan - the bus, assume that it was just noise on the bus, and ignore - the device. - - * scsi.h: Update and add a bunch of missing commands which we - were never using. - - * sd.c: Use restore_flags in do_sd_request - this may result in - latency conditions, but it gets rid of races and crashes. - Do not save flags again when searching for a second command to - queue. - - * st.c: Use bytes, not STP->buffer->buffer_size when reading - from tape. - - -Tue Apr 4 09:42:08 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.4 released. - - * st.c: Fix typo - restoring wrong flags. - -Wed Mar 29 06:55:12 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.3 released. - - * st.c: Perform some waiting operations with interrupts off. - Is this correct??? - -Wed Mar 22 10:34:26 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.2 released. - - * aha152x.c: Modularize. Add support for PCMCIA. - - * eata.c: Update to version 2.0. Fixed bug preventing media - detection. If scsi_register_host returns NULL, fail gracefully. - - * scsi.c: Detect as NEC (for photo-cd purposes) for the 84 - and 25 models as "NEC_OLDCDR". - - * scsi.h: Add define for NEC_OLDCDR - - * sr.c: Add handling for NEC_OLDCDR. Treat as unknown. - - * u14-34f.c: Update to version 2.0. Fixed same bug as in - eata.c. - - -Mon Mar 6 11:11:20 1995 Eric Youngdale (eric@andante) - - * Linux 1.2.0 released. Yeah!!! - - * Minor spelling/punctuation changes throughout. Nothing - substantive. - -Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.95 released. - - * qlogic.c: Update to version 0.41. - - * seagate.c: Change some message to be more descriptive about what - we detected. - - * sr.c: spelling/whitespace changes. - -Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.94 released. - -Mon Feb 20 08:57:17 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.93 released. - - * hosts.h: Change io_port to long int from short. - - * 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP, - NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output - fixed, should initialize correctly if left running, now loadable, - new memory allocation, extraneous diagnostic output suppressed, - splx() replaced with save/restore flags. [ Drew ] - - * hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c, - sr_ioctl.c: Add special junk at end that Emacs will use for - formatting the file. - - * qlogic.c: Update to v0.40a. Improve parity handling. - - * scsi.c: Add Hitachi DK312C to blacklist. Change "};" to "}" in - many places. Use scsi_init_malloc to get command block - may - need this to be dma compatible for some host adapters. - Restore interrupts after unregistering a host. - - * sd.c: Use sti instead of restore flags - causes latency problems. - - * seagate.c: Use controller_type to determine string used when - registering irq. - - * sr.c: More photo-cd hacks to make sure we get the xa stuff right. - * sr.h, sr.c: Change is_xa to xa_flags field. - - * st.c: Disable retries for write operations. - -Wed Feb 15 10:52:56 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.92 released. - - * eata.c: Update to 1.17. - - * eata_dma.c: Update to 2.31a. Add more support for /proc/scsi. - Continuing modularization. Less crashes because of the bug in the - memory management ==> increase C_P_L_CURRENT_MAX to 10 - and decrease C_P_L_DIV to 4. - - * hosts.c: If we remove last host registered, reuse host number. - When freeing memory from host being deregistered, free extra_bytes - too. - - * scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt. - Change memory allocation to work around bugs in __get_dma_pages. - Do not free host if usage count is not zero (for modules). - - * sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000. - - * st.c: Allow for ST_EXTRA_DEVS in st data structures. - - * u14-34f.c: Update to 1.17. - -Thu Feb 9 10:11:16 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.91 released. - - * eata.c: Update to 1.16. Use wish_block instead of host->block. - - * hosts.c: Initialize wish_block to 0. - - * hosts.h: Add wish_block. - - * scsi.c: Use wish_block as indicator that the host should be added - to block list. - - * sg.c: Add SG_EXTRA_DEVS to number of slots. - - * u14-34f.c: Use wish_block. - -Tue Feb 7 11:46:04 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.90 released. - - * eata.c: Change naming from eata_* to eata2x_*. Now at vers 1.15. - Update interrupt handler to take pt_regs as arg. Allow blocking - even if loaded as module. Initialize target_time_out array. - Do not put sti(); in timing loop. - - * hosts.c: Do not reuse host numbers. - Use scsi_make_blocked_list to generate blocking list. - - * script_asm.pl: Beats me. Don't know perl. Something to do with - phase index. - - * scsi.c (scsi_make_blocked_list): New function - code copied from - hosts.c. - - * scsi.c: Update code to disable photo CD for Toshiba cdroms. - Use just manufacturer name, not model number. - - * sr.c: Fix setting density for Toshiba drives. - - * u14-34f.c: Clear target_time_out array during reset. - -Wed Feb 1 09:20:45 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.89 released. - - * Makefile, u14-34f.c: Modularize. - - * Makefile, eata.c: Modularize. Now version 1.14 - - * NCR5380.c: Update interrupt handler with new arglist. Minor - cleanups. - - * eata_dma.c: Begin to modularize. Add hooks for /proc/scsi. - New version 2.3.0a. Add code in interrupt handler to allow - certain CDROM drivers to be detected which return a - CHECK_CONDITION during SCSI bus scan. Add opcode check to get - all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag. - Improvements in HBA identification. Various other minor stuff. - - * hosts.c: Initialize ->dma_channel and ->io_port when registering - a new host. - - * qlogic.c: Modularize and add PCMCIA support. - - * scsi.c: Add Hitachi to blacklist. - - * scsi.c: Change default to no lun scan (too many problem devices). - - * scsi.h: Define QUEUE_FULL condition. - - * sd.c: Do not check for non-existent partition until after - new media check. - - * sg.c: Undo previous change which was wrong. - - * sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000. - - * st.c: Patches from Kai - improve filemark handling. - -Tue Jan 31 17:32:12 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.88 released. - - * Throughout - spelling/grammar fixups. - - * scsi.c: Make sure that all buffers are 16 byte aligned - some - drivers (buslogic) need this. - - * scsi.c (scan_scsis): Remove message printed. - - * scsi.c (scsi_init): Move message here. - -Mon Jan 30 06:40:25 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.87 released. - - * sr.c: Photo-cd related changes. (Gerd Knorr??). - - * st.c: Changes from Kai related to EOM detection. - -Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.86 released. - - * 53c7,8xx.h: Change SG size to 127. - - * eata_dma: Update to version 2.10i. Remove bug in the registration - of multiple HBAs and channels. Minor other improvements and stylistic - changes. - - * scsi.c: Test for Toshiba XM-3401TA and exclude from detection - as toshiba drive - photo cd does not work with this drive. - - * sr.c: Update photocd code. - -Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.85 released. - - * st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c: - include linux/mm.h - - * qlogic.c, buslogic.c, aha1542.c: Include linux/module.h. - -Sun Jan 22 22:08:46 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.84 released. - - * Makefile: Support for loadable QLOGIC boards. - - * aha152x.c: Update to version 1.8 from Juergen. - - * eata_dma.c: Update from Michael Neuffer. - Remove hard limit of 2 commands per lun and make it better - configurable. Improvements in HBA identification. - - * in2000.c: Fix biosparam to support large disks. - - * qlogic.c: Minor changes (change sti -> restore_flags). - -Wed Jan 18 23:33:09 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.83 released. - - * aha1542.c(aha1542_intr_handle): Use arguments handed down to find - which irq. - - * buslogic.c: Likewise. - - * eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards. - - * scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK. - - * sd.c: Fail if we are opening a non-existent partition. - - * sr.c: Bump SR_TIMEOUT to 15000. - Do not probe for media size at boot time(hard on changers). - Flag device as needing sector size instead. - - * sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl. - - * ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args). - -Mon Jan 16 07:18:23 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.82 released. - - Throughout. - - Change all interrupt handlers to accept new calling convention. - In particular, we now receive the irq number as one of the arguments. - - * More minor spelling corrections in some of the new files. - - * aha1542.c, buslogic.c: Clean up interrupt handler a little now - that we receive the irq as an arg. - - * aha274x.c: s/snarf_region/request_region/ - - * eata.c: Update to version 1.12. Fix some comments and display a - message if we cannot reserve the port addresses. - - * u14-34f.c: Update to version 1.13. Fix some comments and display a - message if we cannot reserve the port addresses. - - * eata_dma.c: Define get_board_data function (send INQUIRY command). - Use to improve detection of variants of different DPT boards. Change - version subnumber to "0g". - - * fdomain.c: Update to version 5.26. Improve detection of some boards - repackaged by IBM. - - * scsi.c (scsi_register_host): Change "name" to const char *. - - * sr.c: Fix problem in set mode command for Toshiba drives. - - * sr.c: Fix typo from patch 81. - -Fri Jan 13 12:54:46 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.81 released. Codefreeze for 1.2 release announced. - - Big changes here. - - * eata_dma.*: New files from Michael Neuffer. - (neuffer@goofy.zdv.uni-mainz.de). Should support - all eata/dpt cards. - - * hosts.c, Makefile: Add eata_dma. - - * README.st: Document MTEOM. - - Patches from me (ERY) to finish support for low-level loadable scsi. - It now works, and is actually useful. - - * Throughout - add new argument to scsi_init_malloc that takes an - additional parameter. This is used as a priority to kmalloc, - and you can specify the GFP_DMA flag if you need DMA-able memory. - - * Makefile: For source files that are loadable, always add name - to SCSI_SRCS. Fill in modules: target. - - * hosts.c: Change next_host to next_scsi_host, and make global. - Print hosts after we have identified all of them. Use info() - function if present, otherwise use name field. - - * hosts.h: Change attach function to return int, not void. - Define number of device slots to allow for loadable devices. - Define tags to tell scsi module code what type of module we - are loading. - - * scsi.c: Fix scan_scsis so that it can be run by a user process. - Do not use waiting loops - use up and down mechanism as long - as current != task[0]. - - * scsi.c(scan_scsis): Do not use stack variables for I/O - this - could be > 16Mb if we are loading a module at runtime (i.e. use - scsi_init_malloc to get some memory we know will be safe). - - * scsi.c: Change dma freelist to be a set of pages. This allows - us to dynamically adjust the size of the list by adding more pages - to the pagelist. Fix scsi_malloc and scsi_free accordingly. - - * scsi_module.c: Fix include. - - * sd.c: Declare detach function. Increment/decrement module usage - count as required. Fix init functions to allow loaded devices. - Revalidate all new disks so we get the partition tables. Define - detach function. - - * sr.c: Likewise. - - * sg.c: Declare detach function. Allow attachment of devices on - loaded drivers. - - * st.c: Declare detach function. Increment/decrement module usage - count as required. - -Tue Jan 10 10:09:58 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.79 released. - - Patch from some undetermined individual who needs to get a life :-). - - * sr.c: Attacked by spelling bee... - - Patches from Gerd Knorr: - - * sr.c: make printk messages for photoCD a little more informative. - - * sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl. - -Mon Jan 9 10:01:37 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.78 released. - - * Makefile: Add empty modules: target. - - * Wheee. Now change register_iomem to request_region. - - * in2000.c: Bugfix - apparently this is the fix that we have - all been waiting for. It fixes a problem whereby the driver - is not stable under heavy load. Race condition and all that. - Patch from Peter Lu. - -Wed Jan 4 21:17:40 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.77 released. - - * 53c7,8xx.c: Fix from Linus - emulate splx. - - Throughout: - - Change "snarf_region" with "register_iomem". - - * scsi_module.c: New file. Contains support for low-level loadable - scsi drivers. [ERY]. - - * sd.c: More s/int/long/ changes. - - * seagate.c: Explicitly include linux/config.h - - * sg.c: Increment/decrement module usage count on open/close. - - * sg.c: Be a bit more careful about the user not supplying enough - information for a valid command. Pass correct size down to - scsi_do_cmd. - - * sr.c: More changes for Photo-CD. This apparently breaks NEC drives. - - * sr_ioctl.c: Support CDROMMULTISESSION ioctl. - - -Sun Jan 1 19:55:21 1995 Eric Youngdale (eric@andante) - - * Linux 1.1.76 released. - - * constants.c: Add type cast in switch statement. - - * scsi.c (scsi_free): Change datatype of "offset" to long. - (scsi_malloc): Change a few more variables to long. Who - did this and why was it important? 64 bit machines? - - - Lots of changes to use save_state/restore_state instead of cli/sti. - Files changed include: - - * aha1542.c: - * aha1740.c: - * buslogic.c: - * in2000.c: - * scsi.c: - * scsi_debug.c: - * sd.c: - * sr.c: - * st.c: - -Wed Dec 28 16:38:29 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.75 released. - - * buslogic.c: Spelling fix. - - * scsi.c: Add HP C1790A and C2500A scanjet to blacklist. - - * scsi.c: Spelling fixup. - - * sd.c: Add support for sd_hardsizes (hard sector sizes). - - * ultrastor.c: Use save_flags/restore_flags instead of cli/sti. - -Fri Dec 23 13:36:25 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.74 released. - - * README.st: Update from Kai Makisara. - - * eata.c: New version from Dario - version 1.11. - use scsicam bios_param routine. Add support for 2011 - and 2021 boards. - - * hosts.c: Add support for blocking. Linked list automatically - generated when shpnt->block is set. - - * scsi.c: Add sankyo & HP scanjet to blacklist. Add support for - kicking things loose when we deadlock. - - * scsi.c: Recognize scanners and processors in scan_scsis. - - * scsi_ioctl.h: Increase timeout to 9 seconds. - - * st.c: New version from Kai - add better support for backspace. - - * u14-34f.c: New version from Dario. Supports blocking. - -Wed Dec 14 14:46:30 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.73 released. - - * buslogic.c: Update from Dave Gentzel. Version 1.14. - Add module related stuff. More fault tolerant if out of - DMA memory. - - * fdomain.c: New version from Rik Faith - version 5.22. Add support - for ISA-200S SCSI adapter. - - * hosts.c: Spelling. - - * qlogic.c: Update to version 0.38a. Add more support for PCMCIA. - - * scsi.c: Mask device type with 0x1f during scan_scsis. - Add support for deadlocking, err, make that getting out of - deadlock situations that are created when we allow the user - to limit requests to one host adapter at a time. - - * scsi.c: Bugfix - pass pid, not SCpnt as second arg to - scsi_times_out. - - * scsi.c: Restore interrupt state to previous value instead of using - cli/sti pairs. - - * scsi.c: Add a bunch of module stuff (all commented out for now). - - * scsi.c: Clean up scsi_dump_status. - -Tue Dec 6 12:34:20 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.72 released. - - * sg.c: Bugfix - always use sg_free, since we might have big buff. - -Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.71 released. - - * sg.c: Clear buff field when not in use. Only call scsi_free if - non-null. - - * scsi.h: Call wake_up(&wait_for_request) when done with a - command. - - * scsi.c (scsi_times_out): Pass pid down so that we can protect - against race conditions. - - * scsi.c (scsi_abort): Zero timeout field if we get the - NOT_RUNNING message back from low-level driver. - - - * scsi.c (scsi_done): Restore cmd_len, use_sg here. - - * scsi.c (request_sense): Not here. - - * hosts.h: Add new forbidden_addr, forbidden_size fields. Who - added these and why???? - - * hosts.c (scsi_mem_init): Mark pages as reserved if they fall in - the forbidden regions. I am not sure - I think this is so that - we can deal with boards that do incomplete decoding of their - address lines for the bios chips, but I am not entirely sure. - - * buslogic.c: Set forbidden_addr stuff if using a buggy board. - - * aha1740.c: Test for NULL pointer in SCtmp. This should not - occur, but a nice message is better than a kernel segfault. - - * 53c7,8xx.c: Add new PCI chip ID for 815. - -Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.70 released. - - * ChangeLog, st.c: Spelling. - -Tue Nov 29 18:48:42 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.69 released. - - * u14-34f.h: Non-functional change. [Dario]. - - * u14-34f.c: Use block field in Scsi_Host to prevent commands from - being queued to more than one host at the same time (used when - motherboard does not deal with multiple bus-masters very well). - Only when SINGLE_HOST_OPERATIONS is defined. - Use new cmd_per_lun field. [Dario] - - * eata.c: Likewise. - - * st.c: More changes from Kai. Add ready flag to indicate drive - status. - - * README.st: Document this. - - * sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd - code. - - * sg.c: Bugfix - fix problem where opcode is not correctly set up. - - * seagate.[c,h]: Use #defines to set driver name. - - * scsi_ioctl.c: Zero buffer before executing command. - - * scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate. - Add Sony CDU55S to blacklist. - - * hosts.h: Add new cmd_per_lun field to Scsi_Hosts. - - * hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template. - - * buslogic.c: Use cmd_per_lun field - initialize to different - values depending upon bus type (i.e. use 1 if ISA, so we do not - hog memory). Use other patches which got lost from 1.1.68. - - * aha1542.c: Spelling. - -Tue Nov 29 15:43:50 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.68 released. - - Add support for 12 byte vendor specific commands in scsi-generics, - more (i.e. the last mandatory) low-level changes to support - loadable modules, plus a few other changes people have requested - lately. Changes by me (ERY) unless otherwise noted. Spelling - changes appear from some unknown corner of the universe. - - * Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len. - - * Throughout: Change info() low level function to take a Scsi_Host - pointer. This way the info function can return specific - information about the host in question, if desired. - - * All low-level drivers: Add NULL in initializer for the - usage_count field added to Scsi_Host_Template. - - * aha152x.[c,h]: Remove redundant info() function. - - * aha1542.[c,h]: Likewise. - - * aha1740.[c,h]: Likewise. - - * aha274x.[c,h]: Likewise. - - * eata.[c,h]: Likewise. - - * pas16.[c,h]: Likewise. - - * scsi_debug.[c,h]: Likewise. - - * t128.[c,h]: Likewise. - - * u14-34f.[c,h]: Likewise. - - * ultrastor.[c,h]: Likewise. - - * wd7000.[c,h]: Likewise. - - * aha1542.c: Add support for command line options with lilo to set - DMA parameters, I/O port. From Matt Aarnio. - - * buslogic.[c,h]: New version (1.13) from Dave Gentzel. - - * hosts.h: Add new field to Scsi_Hosts "block" to allow blocking - all I/O to certain other cards. Helps prevent problems with some - ISA motherboards. - - * hosts.h: Add usage_count to Scsi_Host_Template. - - * hosts.h: Add n_io_port to Scsi_Host (used when releasing module). - - * hosts.c: Initialize block field. - - * in2000.c: Remove "static" declarations from exported functions. - - * in2000.h: Likewise. - - * scsi.c: Correctly set cmd_len field as required. Save and - change setting when doing a request_sense, restore when done. - Move abort timeout message. Fix panic in request_queueable to - print correct function name. - - * scsi.c: When incrementing usage count, walk block linked list - for host, and or in SCSI_HOST_BLOCK bit. When decrementing usage - count to 0, clear this bit to allow usage to continue, wake up - processes waiting. - - - * scsi_ioctl.c: If we have an info() function, call it, otherwise - if we have a "name" field, use it, else do nothing. - - * sd.c, sr.c: Clear cmd_len field prior to each command we - generate. - - * sd.h: Add "has_part_table" bit to rscsi_disks. - - * sg.[c,h]: Add support for vendor specific 12 byte commands (i.e. - override command length in COMMAND_SIZE). - - * sr.c: Bugfix from Gerd in photocd code. - - * sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer - - we cannot guarantee that the stack is < 16Mb. - -Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.67 released. - - * sr.c: Change spelling of manufactor to manufacturer. - - * scsi.h: Likewise. - - * scsi.c: Likewise. - - * qlogic.c: Spelling corrections. - - * in2000.h: Spelling corrections. - - * in2000.c: Update from Bill Earnest, change from - jshiffle@netcom.com. Support new bios versions. - - * README.qlogic: Spelling correction. - -Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.66 released. - - * u14-34f.c: Spelling corrections. - - * sr.[h,c]: Add support for multi-session CDs from Gerd Knorr. - - * scsi.h: Add manufactor field for keeping track of device - manufacturer. - - * scsi.c: More spelling corrections. - - * qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha. - - * in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest. - - * fdomain.c: Spelling correction. - - * eata.c: Spelling correction. - -Fri Nov 18 15:22:44 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.65 released. - - * eata.h: Update version string to 1.08.00. - - * eata.c: Set sg_tablesize correctly for DPT PM2012 boards. - - * aha274x.seq: Spell checking. - - * README.st: Likewise. - - * README.aha274x: Likewise. - - * ChangeLog: Likewise. - -Tue Nov 15 15:35:08 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.64 released. - - * u14-34f.h: Update version number to 1.10.01. - - * u14-34f.c: Use Scsi_Host can_queue variable instead of one from template. - - * eata.[c,h]: New driver for DPT boards from Dario Ballabio. - - * buslogic.c: Use can_queue field. - -Wed Nov 30 12:09:09 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.63 released. - - * sd.c: Give I/O error if we attempt 512 byte I/O to a disk with - 1024 byte sectors. - - * scsicam.c: Make sure we do read from whole disk (mask off - partition). - - * scsi.c: Use can_queue in Scsi_Host structure. - Fix panic message about invalid host. - - * hosts.c: Initialize can_queue from template. - - * hosts.h: Add can_queue to Scsi_Host structure. - - * aha1740.c: Print out warning about NULL ecbptr. - -Fri Nov 4 12:40:30 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.62 released. - - * fdomain.c: Update to version 5.20. (From Rik Faith). Support - BIOS version 3.5. - - * st.h: Add ST_EOD symbol. - - * st.c: Patches from Kai Makisara - support additional densities, - add support for MTFSS, MTBSS, MTWSM commands. - - * README.st: Update to document new commands. - - * scsi.c: Add Mediavision CDR-H93MV to blacklist. - -Sat Oct 29 20:57:36 1994 Eric Youngdale (eric@andante.aib.com) - - * Linux 1.1.60 released. - - * u14-34f.[c,h]: New driver from Dario Ballabio. - - * aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c, - README.aha274x: New files, new driver from John Aycock. - - -Tue Oct 11 08:47:39 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.54 released. - - * Add third PCI chip id. [Drew] - - * buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric]. - - * ultrastor.c: Fix asm directives for new GCC. - - * sr.c, sd.c: Use new end_scsi_request function. - - * scsi.h(end_scsi_request): Return pointer to block if still - active, else return NULL if inactive. Fixes race condition. - -Sun Oct 9 20:23:14 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.53 released. - - * scsi.c: Do not allocate dma bounce buffers if we have exactly - 16Mb. - -Fri Sep 9 05:35:30 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.51 released. - - * aha152x.c: Add support for disabling the parity check. Update - to version 1.4. [Juergen]. - - * seagate.c: Tweak debugging message. - -Wed Aug 31 10:15:55 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.50 released. - - * aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen]. - - * scsi.c: Add Quantum PD1225S to blacklist. - -Fri Aug 26 09:38:45 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.49 released. - - * sd.c: Fix bug when we were deleting the wrong entry if we - get an unsupported sector size device. - - * sr.c: Another spelling patch. - -Thu Aug 25 09:15:27 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.48 released. - - * Throughout: Use new semantics for request_dma, as appropriate. - - * sr.c: Print correct device number. - -Sun Aug 21 17:49:23 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.47 released. - - * NCR5380.c: Add support for LIMIT_TRANSFERSIZE. - - * constants.h: Add prototype for print_Scsi_Cmnd. - - * pas16.c: Some more minor tweaks. Test for Mediavision board. - Allow for disks > 1Gb. [Drew??] - - * sr.c: Set SCpnt->transfersize. - -Tue Aug 16 17:29:35 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.46 released. - - * Throughout: More spelling fixups. - - * buslogic.c: Add a few more fixups from Dave. Disk translation - mainly. - - * pas16.c: Add a few patches (Drew?). - - -Thu Aug 11 20:45:15 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.44 released. - - * hosts.c: Add type casts for scsi_init_malloc. - - * scsicam.c: Add type cast. - -Wed Aug 10 19:23:01 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.43 released. - - * Throughout: Spelling cleanups. [??] - - * aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c, - t128.c: Use request_irq, not irqaction. [??] - - * aha1542.c: Move test for shost before we start to use shost. - - * aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new - calling sequence for request_irq. - - * buslogic.c: Update from Dave Gentzel. - -Tue Aug 9 09:32:59 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.42 released. - - * NCR5380.c: Change NCR5380_print_status to static. - - * seagate.c: A few more bugfixes. Only Drew knows what they are - for. - - * ultrastor.c: Tweak some __asm__ directives so that it works - with newer compilers. [??] - -Sat Aug 6 21:29:36 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.40 released. - - * NCR5380.c: Return SCSI_RESET_WAKEUP from reset function. - - * aha1542.c: Reset mailbox status after a bus device reset. - - * constants.c: Fix typo (;;). - - * g_NCR5380.c: - * pas16.c: Correct usage of NCR5380_init. - - * scsi.c: Remove redundant (and unused variables). - - * sd.c: Use memset to clear all of rscsi_disks before we use it. - - * sg.c: Ditto, except for scsi_generics. - - * sr.c: Ditto, except for scsi_CDs. - - * st.c: Initialize STp->device. - - * seagate.c: Fix bug. [Drew] - -Thu Aug 4 08:47:27 1994 Eric Youngdale (eric@andante) - - * Linux 1.1.39 released. - - * Makefile: Fix typo in NCR53C7xx. - - * st.c: Print correct number for device. - -Tue Aug 2 11:29:14 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.38 released. - - Lots of changes in 1.1.38. All from Drew unless otherwise noted. - - * 53c7,8xx.c: New file from Drew. PCI driver. - - * 53c7,8xx.h: Likewise. - - * 53c7,8xx.scr: Likewise. - - * 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise. - - * scsicam.c: New file from Drew. Read block 0 on the disk and - read the partition table. Attempt to deduce the geometry from - the partition table if possible. Only used by 53c[7,8]xx right - now, but could be used by any device for which we have no way - of identifying the geometry. - - * sd.c: Use device letters instead of sd%d in a lot of messages. - - * seagate.c: Fix bug that resulted in lockups with some devices. - - * sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open - device for write. - - * hosts.c, Makefile: Update for new driver. - - * NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support - 53C400 chip. - - * constants.c: Define CONST_CMND and CONST_MSG. Other minor - cleanups along the way. Improve handling of CONST_MSG. - - * fdomain.c, fdomain.h: New version from Rik Faith. Update to - 5.18. Should now support TMC-3260 PCI card with 18C30 chip. - - * pas16.c: Update with new irq initialization. - - * t128.c: Update with minor cleanups. - - * scsi.c (scsi_pid): New variable - gives each command a unique - id. Add Quantum LPS5235S to blacklist. Change in_scan to - in_scan_scsis and make global. - - * scsi.h: Add some defines for extended message handling, - INITIATE/RELEASE_RECOVERY. Add a few new fields to support sync - transfers. - - * scsi_ioctl.h: Add ioctl to request synchronous transfers. - - -Tue Jul 26 21:36:58 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.37 released. - - * aha1542.c: Always call aha1542_mbenable, use new udelay - mechanism so we do not wait a long time if the board does not - implement this command. - - * g_NCR5380.c: Remove #include <linux/config.h> and #if - defined(CONFIG_SCSI_*). - - * seagate.c: Likewise. - - Next round of changes to support loadable modules. Getting closer - now, still not possible to do anything remotely usable. - - hosts.c: Create a linked list of detected high level devices. - (scsi_register_device): New function to insert into this list. - (scsi_init): Call scsi_register_device for each of the known high - level drivers. - - hosts.h: Add prototype for linked list header. Add structure - definition for device template structure which defines the linked - list. - - scsi.c: (scan_scsis): Use linked list instead of knowledge about - existing high level device drivers. - (scsi_dev_init): Use init functions for drivers on linked list - instead of explicit list to initialize and attach devices to high - level drivers. - - scsi.h: Add new field "attached" to scsi_device - count of number - of high level devices attached. - - sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new - scheme. - -Sat Jul 23 13:03:17 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.35 released. - - * ultrastor.c: Change constraint on asm() operand so that it works - with gcc 2.6.0. - -Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.33 released. - - * sr.c(sr_open): Do not allow opens with write access. - -Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.31 released. - - * sd.c: Increase SD_TIMEOUT from 300 to 600. - - * sr.c: Remove stray task_struct* variable that was no longer - used. - - * sr_ioctl.c: Fix typo in up() call. - -Sun Jul 17 16:25:29 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.30 released. - - * scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives - that report themselves as disk drives. - - * (Throughout): Use request.sem instead of request.waiting. - Should fix swap problem with fdomain. - -Thu Jul 14 10:51:42 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.29 released. - - * scsi.c (scan_scsis): Add new devices to end of linked list, not - to the beginning. - - * scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save - the task state before sleeping. - -Sat Jul 9 15:01:03 1994 Eric Youngdale (eric@esp22) - - More changes to eventually support loadable modules. Mainly - we want to use linked lists instead of arrays because it is easier - to dynamically add and remove things this way. - - Quite a bit more work is needed before loadable modules are - possible (and usable) with scsi, but this is most of the grunge - work. - - * Linux 1.1.28 released. - - * scsi.c, scsi.h (allocate_device, request_queueable): Change - argument from index into scsi_devices to a pointer to the - Scsi_Device struct. - - * Throughout: Change all calls to allocate_device, - request_queueable to use new calling sequence. - - * Throughout: Use SCpnt->device instead of - scsi_devices[SCpnt->index]. Ugh - the pointer was there all along - - much cleaner this way. - - * scsi.c (scsi_init_malloc, scsi_free_malloc): New functions - - allow us to pretend that we have a working malloc when we - initialize. Use this instead of passing memory_start, memory_end - around all over the place. - - * scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use - scsi_init_malloc, remove all arguments, no return value. - - * scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd - structs. - - * scsi.c (scsi_dev_init): Set up for scsi_init_malloc. - (scan_scsis): Get SDpnt from scsi_init_malloc, and refresh - when we discover a device. Free pointer before returning. - Change scsi_devices into a linked list. - - * scsi.c (scan_scsis): Change to only scan one host. - (scsi_dev_init): Loop over all detected hosts, and scan them. - - * hosts.c (scsi_init_free): Change so that number of extra bytes - is stored in struct, and we do not have to pass it each time. - - * hosts.h: Change Scsi_Host_Template struct to include "next" and - "release" functions. Initialize to NULL in all low level - adapters. - - * hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked - list scsi_hosts, linked together with the new "next" field. - -Wed Jul 6 05:45:02 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.25 released. - - * aha152x.c: Changes from Juergen - cleanups and updates. - - * sd.c, sr.c: Use new check_media_change and revalidate - file_operations fields. - - * st.c, st.h: Add changes from Kai Makisara, dated Jun 22. - - * hosts.h: Change SG_ALL back to 0xff. Apparently soft error - in /dev/brain resulted in having this bumped up. - Change first parameter in bios_param function to be Disk * instead - of index into rscsi_disks. - - * sd_ioctl.c: Pass pointer to rscsi_disks element instead of index - to array. - - * sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk. - - * scsi.c: Remove redundant Maxtor XT8760S from blacklist. - In scsi_reset, add printk when DEBUG defined. - - * All low level drivers: Modify definitions of bios_param in - appropriate way. - -Thu Jun 16 10:31:59 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.20 released. - - * scsi_ioctl.c: Only pass down the actual number of characters - required to scsi_do_cmd, not the one rounded up to a even number - of sectors. - - * ultrastor.c: Changes from Caleb Epstein for 24f cards. Support - larger SG lists. - - * ultrastor.c: Changes from me - use scsi_register to register - host. Add some consistency checking, - -Wed Jun 1 21:12:13 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.19 released. - - * scsi.h: Add new return code for reset() function: - SCSI_RESET_PUNT. - - * scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for - now. - - * aha1542.c: If the command responsible for the reset is not - pending, return SCSI_RESET_PUNT. - - * aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return - SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE. - -Tue May 31 19:36:01 1994 Eric Youngdale (eric@esp22) - - * buslogic.c: Do not print out message about "must be Adaptec" - if we have detected a buslogic card. Print out a warning message - if we are configuring for >16Mb, since the 445S at board level - D or earlier does not work right. The "D" level board can be made - to work by flipping an undocumented switch, but this is too subtle. - - Changes based upon patches in Yggdrasil distribution. - - * sg.c, sg.h: Return sense data to user. - - * aha1542.c, aha1740.c, buslogic.c: Do not panic if - sense buffer is wrong size. - - * hosts.c: Test for ultrastor card before any of the others. - - * scsi.c: Allow boot-time option for max_scsi_luns=? so that - buggy firmware has an easy work-around. - -Sun May 15 20:24:34 1994 Eric Youngdale (eric@esp22) - - * Linux 1.1.15 released. - - Post-codefreeze thaw... - - * buslogic.[c,h]: New driver from David Gentzel. - - * hosts.h: Add use_clustering field to explicitly say whether - clustering should be used for devices attached to this host - adapter. The buslogic board apparently supports large SG lists, - but it is apparently faster if sd.c condenses this into a smaller - list. - - * sd.c: Use this field instead of heuristic. - - * All host adapter include files: Add appropriate initializer for - use_clustering field. - - * scsi.h: Add #defines for return codes for the abort and reset - functions. There are now a specific set of return codes to fully - specify all of the possible things that the low-level adapter - could do. - - * scsi.c: Act based upon return codes from abort/reset functions. - - * All host adapter abort/reset functions: Return new return code. - - * Add code in scsi.c to help debug timeouts. Use #define - DEBUG_TIMEOUT to enable this. - - * scsi.c: If the host->irq field is set, use - disable_irq/enable_irq before calling queuecommand if we - are not already in an interrupt. Reduce races, and we - can be sloppier about cli/sti in the interrupt routines now - (reduce interrupt latency). - - * constants.c: Fix some things to eliminate warnings. Add some - sense descriptions that were omitted before. - - * aha1542.c: Watch for SCRD from host adapter - if we see it, set - a flag. Currently we only print out the number of pending - commands that might need to be restarted. - - * aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still - full, and attempt to recover. Otherwise give up. - - * aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass - DID_RESET back up to the upper level code for all commands running - on this target (even on different LUNs). - -Sat May 7 14:54:01 1994 - - * Linux 1.1.12 released. - - * st.c, st.h: New version from Kai. Supports boot time - specification of number of buffers. - - * wd7000.[c,h]: Updated driver from John Boyd. Now supports - more than one wd7000 board in machine at one time, among other things. - -Wed Apr 20 22:20:35 1994 - - * Linux 1.1.8 released. - - * sd.c: Add a few type casts where scsi_malloc is called. - -Wed Apr 13 12:53:29 1994 - - * Linux 1.1.4 released. - - * scsi.c: Clean up a few printks (use %p to print pointers). - -Wed Apr 13 11:33:02 1994 - - * Linux 1.1.3 released. - - * fdomain.c: Update to version 5.16 (Handle different FIFO sizes - better). - -Fri Apr 8 08:57:19 1994 - - * Linux 1.1.2 released. - - * Throughout: SCSI portion of cluster diffs added. - -Tue Apr 5 07:41:50 1994 - - * Linux 1.1 development tree initiated. - - * The linux 1.0 development tree is now effectively frozen except - for obvious bugfixes. - -****************************************************************** -****************************************************************** -****************************************************************** -****************************************************************** - -Sun Apr 17 00:17:39 1994 - - * Linux 1.0, patchlevel 9 released. - - * fdomain.c: Update to version 5.16 (Handle different FIFO sizes - better). - -Thu Apr 7 08:36:20 1994 - - * Linux 1.0, patchlevel8 released. - - * fdomain.c: Update to version 5.15 from 5.9. Handles 3.4 bios. - -Sun Apr 3 14:43:03 1994 - - * Linux 1.0, patchlevel6 released. - - * wd7000.c: Make stab at fixing race condition. - -Sat Mar 26 14:14:50 1994 - - * Linux 1.0, patchlevel5 released. - - * aha152x.c, Makefile: Fix a few bugs (too much data message). - Add a few more bios signatures. (Patches from Juergen). - - * aha1542.c: Fix race condition in aha1542_out. - -Mon Mar 21 16:36:20 1994 - - * Linux 1.0, patchlevel3 released. - - * sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt - to open a non-existent device. - - * scsi.c: Add Chinon cdrom to blacklist. - - * sr_ioctl.c: Check return status of verify_area. - -Sat Mar 6 16:06:19 1994 - - * Linux 1.0 released (technically a pre-release). - - * scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist. - -Tue Feb 15 10:58:20 1994 - - * pl15e released. - - * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned - off. - - * constants.c: Fix typo in definition of CONSTANTS. - - * pl15d released. - -Fri Feb 11 10:10:16 1994 - - * pl15c released. - - * scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist. - - * scsi.c: Allow tagged queueing for scsi 3 devices as well. - Some really old devices report a version number of 0. Disallow - LUN != 0 for these. - -Thu Feb 10 09:48:57 1994 - - * pl15b released. - -Sun Feb 6 12:19:46 1994 - - * pl15a released. - -Fri Feb 4 09:02:17 1994 - - * scsi.c: Add Teac cdrom to blacklist. - -Thu Feb 3 14:16:43 1994 - - * pl15 released. - -Tue Feb 1 15:47:43 1994 - - * pl14w released. - - * wd7000.c (wd_bases): Fix typo in last change. - -Mon Jan 24 17:37:23 1994 - - * pl14u released. - - * aha1542.c: Support 1542CF/extended bios. Different from 1542C - - * wd7000.c: Allow bios at 0xd8000 as well. - - * ultrastor.c: Do not truncate cylinders to 1024. - - * fdomain.c: Update to version 5.9 (add new bios signature). - - * NCR5380.c: Update from Drew - should work a lot better now. - -Sat Jan 8 15:13:10 1994 - - * pl14o released. - - * sr_ioctl.c: Zero reserved field before trying to set audio volume. - -Wed Jan 5 13:21:10 1994 - - * pl14m released. - - * fdomain.c: Update to version 5.8. No functional difference??? - -Tue Jan 4 14:26:13 1994 - - * pl14l released. - - * ultrastor.c: Remove outl, inl functions (now provided elsewhere). - -Mon Jan 3 12:27:25 1994 - - * pl14k released. - - * aha152x.c: Remove insw and outsw functions. - - * fdomain.c: Ditto. - -Wed Dec 29 09:47:20 1993 - - * pl14i released. - - * scsi.c: Support RECOVERED_ERROR for tape drives. - - * st.c: Update of tape driver from Kai. - -Tue Dec 21 09:18:30 1993 - - * pl14g released. - - * aha1542.[c,h]: Support extended BIOS stuff. - - * scsi.c: Clean up messages about disks, so they are displayed as - sda, sdb, etc instead of sd0, sd1, etc. - - * sr.c: Force reread of capacity if disk was changed. - Clear buffer before asking for capacity/sectorsize (some drives - do not report this properly). Set needs_sector_size flag if - drive did not return sensible sector size. - -Mon Dec 13 12:13:47 1993 - - * aha152x.c: Update to version .101 from Juergen. - -Mon Nov 29 03:03:00 1993 - - * linux 0.99.14 released. - - * All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi. - - * Throughout: Grammatical corrections to various comments. - - * Makefile: fix so that we do not need to compile things we are - not going to use. - - * NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c, - pas16.h, t128.c, t128.h: New files from Drew. - - * aha152x.c, aha152x.h: New files from Juergen Fischer. - - * aha1542.c: Support for more than one 1542 in the machine - at the same time. Make functions static that do not need - visibility. - - * aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we - know to restart the command. Change prototype of aha1740_reset - to take a command pointer. - - * constants.c: Clean up a few things. - - * fdomain.c: Update to version 5.6. Move snarf_region. Allow - board to be set at different SCSI ids. Remove support for - reselection (did not work well). Set JUMPSTART flag in reset - code. - - * hosts.c: Support new low-level adapters. Allow for more than - one adapter of a given type. - - * hosts.h: Allow for more than one adapter of a given type. - - * scsi.c: Add scsi_device_types array, if NEEDS_JUMPSTART is set - after a low-level reset, start the command again. Sort blacklist, - and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N. - - * scsi.h: Add constants for tagged queueing. - - * Throughout: Use constants from major.h instead of hardcoded - numbers for major numbers. - - * scsi_ioctl.c: Fix bug in buffer length in ioctl_command. Use - verify_area in GET_IDLUN ioctl. Add new ioctls for - TAGGED_QUEUE_ENABLE, DISABLE. Only allow IOCTL_SEND_COMMAND by - superuser. - - * sd.c: Only pay attention to UNIT_ATTENTION for removable disks. - Fix bug where sometimes portions of blocks would get lost - resulting in processes hanging. Add messages when we spin up a - disk, and fix a bug in the timing. Increase read-ahead for disks - that are on a scatter-gather capable host adapter. - - * seagate.c: Fix so that some parameters can be set from the lilo - prompt. Supply jumpstart flag if we are resetting and need the - command restarted. Fix so that we return 1 if we detect a card - so that multiple card detection works correctly. Add yet another - signature for FD cards (950). Add another signature for ST0x. - - * sg.c, sg.h: New files from Lawrence Foard for generic scsi - access. - - * sr.c: Add type casts for (void*) so that we can do pointer - arithmetic. Works with GCC without this, but it is not strictly - correct. Same bugfix as was in sd.c. Increase read-ahead a la - disk driver. - - * sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack - since we cannot guarantee that the stack is < 16Mb. - - ultrastor.c: Update to support 24f properly (JFC's driver). - - wd7000.c: Supply jumpstart flag for reset. Do not round up - number of cylinders in biosparam function. - -Sat Sep 4 20:49:56 1993 - - * 0.99pl13 released. - - * Throughout: Use check_region/snarf_region for all low-level - drivers. - - * aha1542.c: Do hard reset instead of soft (some ethercard probes - screw us up). - - * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are - in a loop whereby the device returns null sense data. - - * sd.c: Add code to spin up a drive if it is not already spinning. - Do this one at a time to make it easier on power supplies. - - * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl. - - * seagate.c: Switch around DATA/CONTROL lines. - - * st.c: Change sense to unsigned. - -Thu Aug 5 11:59:18 1993 - - * 0.99pl12 released. - - * constants.c, constants.h: New files with ascii descriptions of - various conditions. - - * Makefile: Do not try to count the number of low-level drivers, - just generate the list of .o files. - - * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer). Add tests - for addresses > 16Mb, panic if we find one. - - * aha1740.c: Ditto with sizeof(). - - * fdomain.c: Update to version 3.18. Add new signature, register IRQ - with irqaction. Use ID 7 for new board. Be more intelligent about - obtaining the h/s/c numbers for biosparam. - - * hosts.c: Do not depend upon Makefile generated count of the number - of low-level host adapters. - - * scsi.c: Use array for scsi_command_size instead of a function. Add - Texel cdrom and Maxtor XT-4380S to blacklist. Allow compile time - option for no-multi lun scan. Add semaphore for possible problems - with handshaking, assume device is faulty until we know it not to be - the case. Add DEBUG_INIT symbol to dump info as we scan for devices. - Zero sense buffer so we can tell if we need to request it. When - examining sense information, request sense if buffer is all zero. - If RESET, request sense information to see what to do next. - - * scsi_debug.c: Change some constants to use symbols like INT_MAX. - - * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl - calls from kernel space. - - * sd.c: Increase timeout to 300. Use functions in constants.h to - display info. Use scsi_malloc buffer for READ_CAPACITY, since - we cannot guarantee that a stack based buffer is < 16Mb. - - * sd_ioctl.c: Add BLKFLSBUF ioctl. - - * seagate.c: Add new compile time options for ARBITRATE, - SLOW_HANDSHAKE, and SLOW_RATE. Update assembly loops for transferring - data. Use kernel_scsi_ioctl to request mode page with geometry. - - * sr.c: Use functions in constants.c to display messages. - - * st.c: Support for variable block size. - - * ultrastor.c: Do not use cache for tape drives. Set - unchecked_isa_dma flag, even though this may not be needed (gets set - later). - -Sat Jul 17 18:32:44 1993 - - * 0.99pl11 released. C++ compilable. - - * Throughout: Add type casts all over the place, and use "ip" instead - of "info" in the various biosparam functions. - - * Makefile: Compile seagate.c with C++ compiler. - - * aha1542.c: Always set ccb pointer as this gets trashed somehow on - some systems. Add a few type casts. Update biosparam function a little. - - * aha1740.c: Add a few type casts. - - * fdomain.c: Update to version 3.17 from 3.6. Now works with - TMC-18C50. - - * scsi.c: Minor changes here and there with datatypes. Save use_sg - when requesting sense information so that this can properly be - restored if we retry the command. Set aside dma buffers assuming each - block is 1 page, not 1Kb minix block. - - * scsi_ioctl.c: Add a few type casts. Other minor changes. - - * sd.c: Correctly free all scsi_malloc'd memory if we run out of - dma_pool. Store blocksize information for each partition. - - * seagate.c: Minor cleanups here and there. - - * sr.c: Set up blocksize array for all discs. Fix bug in freeing - buffers if we run out of dma pool. - -Thu Jun 2 17:58:11 1993 - - * 0.99pl10 released. - - * aha1542.c: Support for BT 445S (VL-bus board with no dma channel). - - * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50. - - * scsi.c: First attempt to fix problem with old_use_sg. Change - NOT_READY to a SUGGEST_ABORT. Fix timeout race where time might - get decremented past zero. - - * sd.c: Add block_fsync function to dispatch table. - - * sr.c: Increase timeout to 500 from 250. Add entry for sync in - dispatch table (supply NULL). If we do not have a sectorsize, - try to get it in the sd_open function. Add new function just to - obtain sectorsize. - - * sr.h: Add needs_sector_size semaphore. - - * st.c: Add NULL for fsync in dispatch table. - - * wd7000.c: Allow another condition for power on that are normal - and do not require a panic. - -Thu Apr 22 23:10:11 1993 - - * 0.99pl9 released. - - * aha1542.c: Use (void) instead of () in setup_mailboxes. - - * scsi.c: Initialize transfersize and underflow fields in SCmd to 0. - Do not panic for unsupported message bytes. - - * scsi.h: Allocate 12 bytes instead of 10 for commands. Add - transfersize and underflow fields. - - * scsi_ioctl.c: Further bugfix to ioctl_probe. - - * sd.c: Use long instead of int for last parameter in sd_ioctl. - Initialize transfersize and underflow fields. - - * sd_ioctl.c: Ditto for sd_ioctl(,,,,); - - * seagate.c: New version from Drew. Includes new signatures for FD - cards. Support for 0ws jumper. Correctly initialize - scsi_hosts[hostnum].this_id. Improved handing of - disconnect/reconnect, and support command linking. Use - transfersize and underflow fields. Support scatter-gather. - - * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl. - Use buffer and buflength in do_ioctl. Patches from Chris Newbold for - scsi-2 audio commands. - - * ultrastor.c: Comment out in_byte (compiler warning). - - * wd7000.c: Change () to (void) in wd7000_enable_dma. - -Wed Mar 31 16:36:25 1993 - - * 0.99pl8 released. - - * aha1542.c: Handle mailboxes better for 1542C. - Do not truncate number of cylinders at 1024 for biosparam call. - - * aha1740.c: Fix a few minor bugs for multiple devices. - Same as above for biosparam. - - * scsi.c: Add lockable semaphore for removable devices that can have - media removal prevented. Add another signature for flopticals. - (allocate_device): Fix race condition. Allow more space in dma pool - for blocksizes of up to 4Kb. - - * scsi.h: Define COMMAND_SIZE. Define a SCSI specific version of - INIT_REQUEST that can run with interrupts off. - - * scsi_ioctl.c: Make ioctl_probe function more idiot-proof. If - a removable device says ILLEGAL REQUEST to a door-locking command, - clear lockable flag. Add SCSI_IOCTL_GET_IDLUN ioctl. Do not attempt - to lock door for devices that do not have lockable semaphore set. - - * sd.c: Fix race condition for multiple disks. Use INIT_SCSI_REQUEST - instead of INIT_REQUEST. Allow sector sizes of 1024 and 256. For - removable disks that are not ready, mark them as having a media change - (some drives do not report this later). - - * seagate.c: Use volatile keyword for memory-mapped register pointers. - - * sr.c: Fix race condition, a la sd.c. Increase the number of retries - to 1. Use INIT_SCSI_REQUEST. Allow 512 byte sector sizes. Do a - read_capacity when we init the device so we know the size and - sectorsize. - - * st.c: If ioctl not found in st.c, try scsi_ioctl for others. - - * ultrastor.c: Do not truncate number of cylinders at 1024 for - biosparam call. - - * wd7000.c: Ditto. - Throughout: Use COMMAND_SIZE macro to determine length of scsi - command. - - - -Sat Mar 13 17:31:29 1993 - - * 0.99pl7 released. - - Throughout: Improve punctuation in some messages, and use new - verify_area syntax. - - * aha1542.c: Handle unexpected interrupts better. - - * scsi.c: Ditto. Handle reset conditions a bit better, asking for - sense information and retrying if required. - - * scsi_ioctl.c: Allow for 12 byte scsi commands. - - * ultrastor.c: Update to use scatter-gather. - -Sat Feb 20 17:57:15 1993 - - * 0.99pl6 released. - - * fdomain.c: Update to version 3.5. Handle spurious interrupts - better. - - * sd.c: Use register_blkdev function. - - * sr.c: Ditto. - - * st.c: Use register_chrdev function. - - * wd7000.c: Undo previous change. - -Sat Feb 6 11:20:43 1993 - - * 0.99pl5 released. - - * scsi.c: Fix bug in testing for UNIT_ATTENTION. - - * wd7000.c: Check at more addresses for bios. Fix bug in biosparam - (heads & sectors turned around). - -Wed Jan 20 18:13:59 1993 - - * 0.99pl4 released. - - * scsi.c: Ignore leading spaces when looking for blacklisted devices. - - * seagate.c: Add a few new signatures for FD cards. Another patch - with SCint to fix race condition. Use recursion_depth to keep track - of how many times we have been recursively called, and do not start - another command unless we are on the outer level. Fixes bug - with Syquest cartridge drives (used to crash kernel), because - they do not disconnect with large data transfers. - -Tue Jan 12 14:33:36 1993 - - * 0.99pl3 released. - - * fdomain.c: Update to version 3.3 (a few new signatures). - - * scsi.c: Add CDU-541, Denon DRD-25X to blacklist. - (allocate_request, request_queueable): Init request.waiting to NULL if - non-buffer type of request. - - * seagate.c: Allow controller to be overridden with CONTROLLER symbol. - Set SCint=NULL when we are done, to remove race condition. - - * st.c: Changes from Kai. - -Wed Dec 30 20:03:47 1992 - - * 0.99pl2 released. - - * scsi.c: Blacklist back in. Remove Newbury drive as other bugfix - eliminates need for it here. - - * sd.c: Return ENODEV instead of EACCES if no such device available. - (sd_init) Init blkdev_fops earlier so that sd_open is available sooner. - - * sr.c: Same as above for sd.c. - - * st.c: Return ENODEV instead of ENXIO if no device. Init chrdev_fops - sooner, so that it is always there even if no tapes. - - * seagate.c (controller_type): New variable to keep track of ST0x or - FD. Modify signatures list to indicate controller type, and init - controller_type once we find a match. - - * wd7000.c (wd7000_set_sync): Remove redundant function. - -Sun Dec 20 16:26:24 1992 - - * 0.99pl1 released. - - * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against - NR_SCSI_DEVICES. - - * sr_ioctl.c: Verify that device exists before allowing an ioctl. - - * st.c: Patches from Kai - change timeout values, improve end of tape - handling. - -Sun Dec 13 18:15:23 1992 - - * 0.99 kernel released. Baseline for this ChangeLog. |