diff options
Diffstat (limited to 'Documentation/sound/alsa')
-rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 31 | ||||
-rw-r--r-- | Documentation/sound/alsa/HD-Audio.txt | 4 |
2 files changed, 21 insertions, 14 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index bfcbbf88c44d..2075bbb8b3e2 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -227,6 +227,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-asihpi + ----------------- + + Module for AudioScience ASI soundcards + + enable_hpi_hwdep - enable HPI hwdep for AudioScience soundcard + + This module supports multiple cards. + The driver requires the firmware loader support on kernel. + Module snd-atiixp ----------------- @@ -622,28 +632,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. - Module snd-es968 - ---------------- - - Module for sound cards based on ESS ES968 chip (PnP only). - - This module supports multiple cards, PnP and autoprobe. - - The power-management is supported. - Module snd-es1688 ----------------- Module for ESS AudioDrive ES-1688 and ES-688 sound cards. - port - port # for ES-1688 chip (0x220,0x240,0x260) - fm_port - port # for OPL3 (option; share the same port as default) + isapnp - ISA PnP detection - 0 = disable, 1 = enable (default) mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default) - irq - IRQ # for ES-1688 chip (5,7,9,10) mpu_irq - IRQ # for MPU-401 port (5,7,9,10) + fm_port - port # for OPL3 (option; share the same port as default) + + with isapnp=0, the following additional options are available: + port - port # for ES-1688 chip (0x220,0x240,0x260) + irq - IRQ # for ES-1688 chip (5,7,9,10) dma8 - DMA # for ES-1688 chip (0,1,3) - This module supports multiple cards and autoprobe (without MPU-401 port). + This module supports multiple cards and autoprobe (without MPU-401 port) + and PnP with the ES968 chip. Module snd-es18xx ----------------- diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 98d14cb8a85d..bdafdbd32561 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -204,7 +204,6 @@ generic parser regardless of the codec. Usually the codec-specific parser is much better than the generic parser (as now). Thus this option is more about the debugging purpose. - Speaker and Headphone Output ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ One of the most frequent (and obvious) bugs with HD-audio is the @@ -600,6 +599,9 @@ probing, the proc file is available, so you can get the raw codec information before modified by the driver. Of course, the driver isn't usable with `probe_only=1`. But you can continue the configuration via hwdep sysfs file if hda-reconfig option is enabled. +Using `probe_only` mask 2 skips the reset of HDA codecs (use +`probe_only=3` as module option). The hwdep interface can be used +to determine the BIOS codec initialization. hda-verb |