1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/sound/designs/powersave.rst b/Documentation/sound/designs/powersave.rst
new file mode 100644
index 000000000000..138157452eb9
--- /dev/null
+++ b/Documentation/sound/designs/powersave.rst
@@ -0,0 +1,43 @@
+==========================
+Notes on Power-Saving Mode
+==========================
+
+AC97 and HD-audio drivers have the automatic power-saving mode.
+This feature is enabled via Kconfig ``CONFIG_SND_AC97_POWER_SAVE``
+and ``CONFIG_SND_HDA_POWER_SAVE`` options, respectively.
+
+With the automatic power-saving, the driver turns off the codec power
+appropriately when no operation is required.  When no applications use
+the device and/or no analog loopback is set, the power disablement is
+done fully or partially.  It'll save a certain power consumption, thus
+good for laptops (even for desktops).
+
+The time-out for automatic power-off can be specified via ``power_save``
+module option of snd-ac97-codec and snd-hda-intel modules.  Specify
+the time-out value in seconds.  0 means to disable the automatic
+power-saving.  The default value of timeout is given via
+``CONFIG_SND_AC97_POWER_SAVE_DEFAULT`` and
+``CONFIG_SND_HDA_POWER_SAVE_DEFAULT`` Kconfig options.  Setting this to 1
+(the minimum value) isn't recommended because many applications try to
+reopen the device frequently.  10 would be a good choice for normal
+operations.
+
+The ``power_save`` option is exported as writable.  This means you can
+adjust the value via sysfs on the fly.  For example, to turn on the
+automatic power-save mode with 10 seconds, write to
+``/sys/modules/snd_ac97_codec/parameters/power_save`` (usually as root):
+::
+
+	# echo 10 > /sys/modules/snd_ac97_codec/parameters/power_save
+
+
+Note that you might hear click noise/pop when changing the power
+state.  Also, it often takes certain time to wake up from the
+power-down to the active state.  These are often hardly to fix, so
+don't report extra bug reports unless you have a fix patch ;-)
+
+For HD-audio interface, there is another module option,
+power_save_controller.  This enables/disables the power-save mode of
+the controller side.  Setting this on may reduce a bit more power
+consumption, but might result in longer wake-up time and click noise.
+Try to turn it off when you experience such a thing too often.