diff options
Diffstat (limited to 'Documentation/sound/hd-audio')
| -rw-r--r-- | Documentation/sound/hd-audio/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/sound/hd-audio/intel-multi-link.rst | 312 |
2 files changed, 313 insertions, 0 deletions
diff --git a/Documentation/sound/hd-audio/index.rst b/Documentation/sound/hd-audio/index.rst index 6e12de9fc34e..baefe4a5d165 100644 --- a/Documentation/sound/hd-audio/index.rst +++ b/Documentation/sound/hd-audio/index.rst @@ -9,3 +9,4 @@ HD-Audio controls dp-mst realtek-pc-beep + intel-multi-link diff --git a/Documentation/sound/hd-audio/intel-multi-link.rst b/Documentation/sound/hd-audio/intel-multi-link.rst new file mode 100644 index 000000000000..bf0bb78833e7 --- /dev/null +++ b/Documentation/sound/hd-audio/intel-multi-link.rst @@ -0,0 +1,312 @@ +.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +.. include:: <isonum.txt> + +================================================ +HDAudio multi-link extensions on Intel platforms +================================================ + +:Copyright: |copy| 2023 Intel Corporation + +This file documents the 'multi-link structure' introduced in 2015 with +the Skylake processor and recently extended in newer Intel platforms + +HDaudio existing link mapping (2015 addition in SkyLake) +======================================================== + +External HDAudio codecs are handled with link #0, while iDISP codec +for HDMI/DisplayPort is handled with link #1. + +The only change to the 2015 definitions is the declaration of the +LCAP.ALT=0x0 - since the ALT bit was previously reserved, this is a +backwards-compatible change. + +LCTL.SPA and LCTL.CPA are automatically set when exiting reset. They +are only used in existing drivers when the SCF value needs to be +corrected. + +Basic structure for HDaudio codecs +---------------------------------- + +:: + + +-----------+ + | ML cap #0 | + +-----------+ + | ML cap #1 |---+ + +-----------+ | + | + +--> 0x0 +---------------+ LCAP + | ALT=0 | + +---------------+ + | S192 | + +---------------+ + | S96 | + +---------------+ + | S48 | + +---------------+ + | S24 | + +---------------+ + | S12 | + +---------------+ + | S6 | + +---------------+ + + 0x4 +---------------+ LCTL + | INTSTS | + +---------------+ + | CPA | + +---------------+ + | SPA | + +---------------+ + | SCF | + +---------------+ + + 0x8 +---------------+ LOSIDV + | L1OSIVD15 | + +---------------+ + | L1OSIDV.. | + +---------------+ + | L1OSIDV1 | + +---------------+ + + 0xC +---------------+ LSDIID + | SDIID14 | + +---------------+ + | SDIID... | + +---------------+ + | SDIID0 | + +---------------+ + +SoundWire HDaudio extended link mapping +======================================= + +A SoundWire extended link is identified when LCAP.ALT=1 and +LEPTR.ID=0. + +DMA control uses the existing LOSIDV register. + +Changes include additional descriptions for enumeration that were not +present in earlier generations. + +- multi-link synchronization: capabilities in LCAP.LSS and control in LSYNC +- number of sublinks (manager IP) in LCAP.LSCOUNT +- power management moved from SHIM to LCTL.SPA bits +- hand-over to the DSP for access to multi-link registers, SHIM/IP with LCTL.OFLEN +- mapping of SoundWire codecs to SDI ID bits +- move of SHIM and Cadence registers to different offsets, with no + change in functionality. The LEPTR.PTR value is an offset from the + ML address, with a default value of 0x30000. + +Extended structure for SoundWire (assuming 4 Manager IP) +-------------------------------------------------------- + +:: + + +-----------+ + | ML cap #0 | + +-----------+ + | ML cap #1 | + +-----------+ + | ML cap #2 |---+ + +-----------+ | + | + +--> 0x0 +---------------+ LCAP + | ALT=1 | + +---------------+ + | INTC | + +---------------+ + | OFLS | + +---------------+ + | LSS | + +---------------+ + | SLCOUNT=4 |-----------+ + +---------------+ | + | + 0x4 +---------------+ LCTL | + | INTSTS | | + +---------------+ | + | CPA (x bits) | | + +---------------+ | + | SPA (x bits) | | + +---------------+ for each sublink x + | INTEN | | + +---------------+ | + | OFLEN | | + +---------------+ | + | + 0x8 +---------------+ LOSIDV | + | L1OSIVD15 | | + +---------------+ | + | L1OSIDV.. | | + +---------------+ | + | L1OSIDV1 | +---+----------------------------------------------------------+ + +---------------+ | | + v | + 0xC + 0x2 * x +---------------+ LSDIIDx +---> 0x30000 +-----------------+ 0x00030000 | + | SDIID14 | | | SoundWire SHIM | | + +---------------+ | | generic | | + | SDIID... | | +-----------------+ 0x00030100 | + +---------------+ | | SoundWire IP | | + | SDIID0 | | +-----------------+ 0x00036000 | + +---------------+ | | SoundWire SHIM | | + | | vendor-specific | | + 0x1C +---------------+ LSYNC | +-----------------+ | + | CMDSYNC | | v + +---------------+ | +-----------------+ 0x00030000 + 0x8000 * x + | SYNCGO | | | SoundWire SHIM | + +---------------+ | | generic | + | SYNCPU | | +-----------------+ 0x00030100 + 0x8000 * x + +---------------+ | | SoundWire IP | + | SYNPRD | | +-----------------+ 0x00036000 + 0x8000 * x + +---------------+ | | SoundWire SHIM | + | | vendor-specific | + 0x20 +---------------+ LEPTR | +-----------------+ + | ID = 0 | | + +---------------+ | + | VER | | + +---------------+ | + | PTR |------------+ + +---------------+ + + +DMIC HDaudio extended link mapping +================================== + +A DMIC extended link is identified when LCAP.ALT=1 and +LEPTR.ID=0xC1 are set. + +DMA control uses the existing LOSIDV register + +Changes include additional descriptions for enumeration that were not +present in earlier generations. + +- multi-link synchronization: capabilities in LCAP.LSS and control in LSYNC +- power management with LCTL.SPA bits +- hand-over to the DSP for access to multi-link registers, SHIM/IP with LCTL.OFLEN + +- move of DMIC registers to different offsets, with no change in + functionality. The LEPTR.PTR value is an offset from the ML + address, with a default value of 0x10000. + +Extended structure for DMIC +--------------------------- + +:: + + +-----------+ + | ML cap #0 | + +-----------+ + | ML cap #1 | + +-----------+ + | ML cap #2 |---+ + +-----------+ | + | + +--> 0x0 +---------------+ LCAP + | ALT=1 | + +---------------+ + | INTC | + +---------------+ + | OFLS | + +---------------+ + | SLCOUNT=1 | + +---------------+ + + 0x4 +---------------+ LCTL + | INTSTS | + +---------------+ + | CPA | + +---------------+ + | SPA | + +---------------+ + | INTEN | + +---------------+ + | OFLEN | + +---------------+ +---> 0x10000 +-----------------+ 0x00010000 + | | DMIC SHIM | + 0x8 +---------------+ LOSIDV | | generic | + | L1OSIVD15 | | +-----------------+ 0x00010100 + +---------------+ | | DMIC IP | + | L1OSIDV.. | | +-----------------+ 0x00016000 + +---------------+ | | DMIC SHIM | + | L1OSIDV1 | | | vendor-specific | + +---------------+ | +-----------------+ + | + 0x20 +---------------+ LEPTR | + | ID = 0xC1 | | + +---------------+ | + | VER | | + +---------------+ | + | PTR |-----------+ + +---------------+ + + +SSP HDaudio extended link mapping +================================= + +A DMIC extended link is identified when LCAP.ALT=1 and +LEPTR.ID=0xC0 are set. + +DMA control uses the existing LOSIDV register + +Changes include additional descriptions for enumeration and control that were not +present in earlier generations: +- number of sublinks (SSP IP instances) in LCAP.LSCOUNT +- power management moved from SHIM to LCTL.SPA bits +- hand-over to the DSP for access to multi-link registers, SHIM/IP +with LCTL.OFLEN +- move of SHIM and SSP IP registers to different offsets, with no +change in functionality. The LEPTR.PTR value is an offset from the ML +address, with a default value of 0x28000. + +Extended structure for SSP (assuming 3 instances of the IP) +----------------------------------------------------------- + +:: + + +-----------+ + | ML cap #0 | + +-----------+ + | ML cap #1 | + +-----------+ + | ML cap #2 |---+ + +-----------+ | + | + +--> 0x0 +---------------+ LCAP + | ALT=1 | + +---------------+ + | INTC | + +---------------+ + | OFLS | + +---------------+ + | SLCOUNT=3 |-------------------------for each sublink x -------------------------+ + +---------------+ | + | + 0x4 +---------------+ LCTL | + | INTSTS | | + +---------------+ | + | CPA (x bits) | | + +---------------+ | + | SPA (x bits) | | + +---------------+ | + | INTEN | | + +---------------+ | + | OFLEN | | + +---------------+ +---> 0x28000 +-----------------+ 0x00028000 | + | | SSP SHIM | | + 0x8 +---------------+ LOSIDV | | generic | | + | L1OSIVD15 | | +-----------------+ 0x00028100 | + +---------------+ | | SSP IP | | + | L1OSIDV.. | | +-----------------+ 0x00028C00 | + +---------------+ | | SSP SHIM | | + | L1OSIDV1 | | | vendor-specific | | + +---------------+ | +-----------------+ | + | v + 0x20 +---------------+ LEPTR | +-----------------+ 0x00028000 + 0x1000 * x + | ID = 0xC0 | | | SSP SHIM | + +---------------+ | | generic | + | VER | | +-----------------+ 0x00028100 + 0x1000 * x + +---------------+ | | SSP IP | + | PTR |-----------+ +-----------------+ 0x00028C00 + 0x1000 * x + +---------------+ | SSP SHIM | + | vendor-specific | + +-----------------+ |