diff options
Diffstat (limited to 'Documentation/userspace-api/media')
12 files changed, 1026 insertions, 809 deletions
diff --git a/Documentation/userspace-api/media/drivers/hantro.rst b/Documentation/userspace-api/media/drivers/hantro.rst deleted file mode 100644 index cd9754b4e005..000000000000 --- a/Documentation/userspace-api/media/drivers/hantro.rst +++ /dev/null @@ -1,19 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -Hantro video decoder driver -=========================== - -The Hantro video decoder driver implements the following driver-specific controls: - -``V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP (integer)`` - Specifies to Hantro HEVC video decoder driver the number of data (in bits) to - skip in the slice segment header. - If non-IDR, the bits to be skipped go from syntax element "pic_output_flag" - to before syntax element "slice_temporal_mvp_enabled_flag". - If IDR, the skipped bits are just "pic_output_flag" - (separate_colour_plane_flag is not supported). - -.. note:: - - This control is not yet part of the public kernel API and - it is expected to change. diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst index 12e3c512d718..1a9038f5f9fa 100644 --- a/Documentation/userspace-api/media/drivers/index.rst +++ b/Documentation/userspace-api/media/drivers/index.rst @@ -33,7 +33,6 @@ For more details see the file COPYING in the source distribution of Linux. ccs cx2341x-uapi - hantro imx-uapi max2175 meye-uapi diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst index 3eec65174260..4463fce694b0 100644 --- a/Documentation/userspace-api/media/v4l/control.rst +++ b/Documentation/userspace-api/media/v4l/control.rst @@ -461,10 +461,10 @@ Example: Changing controls perror("VIDIOC_QUERYCTRL"); exit(EXIT_FAILURE); } else { - printf("V4L2_CID_BRIGHTNESS is not supportedn"); + printf("V4L2_CID_BRIGHTNESS is not supported\n"); } } else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) { - printf("V4L2_CID_BRIGHTNESS is not supportedn"); + printf("V4L2_CID_BRIGHTNESS is not supported\n"); } else { memset(&control, 0, sizeof (control)); control.id = V4L2_CID_BRIGHTNESS; diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index bee73065e993..cd33857d947d 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -2048,3 +2048,905 @@ This structure contains all loop filter related parameters. See sections - 0x2 - When set, the bitstream contains additional syntax elements that specify which mode and reference frame deltas are to be updated. + +.. _v4l2-codec-stateless-hevc: + +``V4L2_CID_STATELESS_HEVC_SPS (struct)`` + Specifies the Sequence Parameter Set fields (as extracted from the + bitstream) for the associated HEVC slice data. + These bitstream parameters are defined according to :ref:`hevc`. + They are described in section 7.4.3.2 "Sequence parameter set RBSP + semantics" of the specification. + +.. c:type:: v4l2_ctrl_hevc_sps + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_sps + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``video_parameter_set_id`` + - Specifies the value of the vps_video_parameter_set_id of the active VPS + as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics" + of H.265 specifications. + * - __u8 + - ``seq_parameter_set_id`` + - Provides an identifier for the SPS for reference by other syntax elements + as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics" + of H.265 specifications. + * - __u16 + - ``pic_width_in_luma_samples`` + - Specifies the width of each decoded picture in units of luma samples. + * - __u16 + - ``pic_height_in_luma_samples`` + - Specifies the height of each decoded picture in units of luma samples. + * - __u8 + - ``bit_depth_luma_minus8`` + - This value plus 8 specifies the bit depth of the samples of the luma array. + * - __u8 + - ``bit_depth_chroma_minus8`` + - This value plus 8 specifies the bit depth of the samples of the chroma arrays. + * - __u8 + - ``log2_max_pic_order_cnt_lsb_minus4`` + - Specifies the value of the variable MaxPicOrderCntLsb. + * - __u8 + - ``sps_max_dec_pic_buffering_minus1`` + - This value plus 1 specifies the maximum required size of the decoded picture buffer for + the coded video sequence (CVS). + * - __u8 + - ``sps_max_num_reorder_pics`` + - Indicates the maximum allowed number of pictures. + * - __u8 + - ``sps_max_latency_increase_plus1`` + - Used to signal MaxLatencyPictures, which indicates the maximum number of + pictures that can precede any picture in output order and follow that + picture in decoding order. + * - __u8 + - ``log2_min_luma_coding_block_size_minus3`` + - This value plus 3 specifies the minimum luma coding block size. + * - __u8 + - ``log2_diff_max_min_luma_coding_block_size`` + - Specifies the difference between the maximum and minimum luma coding block size. + * - __u8 + - ``log2_min_luma_transform_block_size_minus2`` + - This value plus 2 specifies the minimum luma transform block size. + * - __u8 + - ``log2_diff_max_min_luma_transform_block_size`` + - Specifies the difference between the maximum and minimum luma transform block size. + * - __u8 + - ``max_transform_hierarchy_depth_inter`` + - Specifies the maximum hierarchy depth for transform units of coding units coded + in inter prediction mode. + * - __u8 + - ``max_transform_hierarchy_depth_intra`` + - Specifies the maximum hierarchy depth for transform units of coding units coded in + intra prediction mode. + * - __u8 + - ``pcm_sample_bit_depth_luma_minus1`` + - This value plus 1 specifies the number of bits used to represent each of PCM sample values of the + luma component. + * - __u8 + - ``pcm_sample_bit_depth_chroma_minus1`` + - Specifies the number of bits used to represent each of PCM sample values of + the chroma components. + * - __u8 + - ``log2_min_pcm_luma_coding_block_size_minus3`` + - Plus 3 specifies the minimum size of coding blocks. + * - __u8 + - ``log2_diff_max_min_pcm_luma_coding_block_size`` + - Specifies the difference between the maximum and minimum size of coding blocks. + * - __u8 + - ``num_short_term_ref_pic_sets`` + - Specifies the number of st_ref_pic_set() syntax structures included in the SPS. + * - __u8 + - ``num_long_term_ref_pics_sps`` + - Specifies the number of candidate long-term reference pictures that are + specified in the SPS. + * - __u8 + - ``chroma_format_idc`` + - Specifies the chroma sampling. + * - __u8 + - ``sps_max_sub_layers_minus1`` + - This value plus 1 specifies the maximum number of temporal sub-layers. + * - __u64 + - ``flags`` + - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` + +.. raw:: latex + + \normalsize + +.. _hevc_sps_flags: + +``Sequence Parameter Set Flags`` + +.. raw:: latex + + \small + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE`` + - 0x00000001 + - + * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED`` + - 0x00000002 + - + * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED`` + - 0x00000004 + - + * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET`` + - 0x00000008 + - + * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED`` + - 0x00000010 + - + * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED`` + - 0x00000020 + - + * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT`` + - 0x00000040 + - + * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED`` + - 0x00000080 + - + * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED`` + - 0x00000100 + - + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_PPS (struct)`` + Specifies the Picture Parameter Set fields (as extracted from the + bitstream) for the associated HEVC slice data. + These bitstream parameters are defined according to :ref:`hevc`. + They are described in section 7.4.3.3 "Picture parameter set RBSP + semantics" of the specification. + +.. c:type:: v4l2_ctrl_hevc_pps + +.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_pps + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``pic_parameter_set_id`` + - Identifies the PPS for reference by other syntax elements. + * - __u8 + - ``num_extra_slice_header_bits`` + - Specifies the number of extra slice header bits that are present + in the slice header RBSP for coded pictures referring to the PPS. + * - __u8 + - ``num_ref_idx_l0_default_active_minus1`` + - This value plus 1 specifies the inferred value of num_ref_idx_l0_active_minus1. + * - __u8 + - ``num_ref_idx_l1_default_active_minus1`` + - This value plus 1 specifies the inferred value of num_ref_idx_l1_active_minus1. + * - __s8 + - ``init_qp_minus26`` + - This value plus 26 specifies the initial value of SliceQp Y for each slice + referring to the PPS. + * - __u8 + - ``diff_cu_qp_delta_depth`` + - Specifies the difference between the luma coding tree block size + and the minimum luma coding block size of coding units that + convey cu_qp_delta_abs and cu_qp_delta_sign_flag. + * - __s8 + - ``pps_cb_qp_offset`` + - Specifies the offsets to the luma quantization parameter Cb. + * - __s8 + - ``pps_cr_qp_offset`` + - Specifies the offsets to the luma quantization parameter Cr. + * - __u8 + - ``num_tile_columns_minus1`` + - This value plus 1 specifies the number of tile columns partitioning the picture. + * - __u8 + - ``num_tile_rows_minus1`` + - This value plus 1 specifies the number of tile rows partitioning the picture. + * - __u8 + - ``column_width_minus1[20]`` + - This value plus 1 specifies the width of the i-th tile column in units of + coding tree blocks. + * - __u8 + - ``row_height_minus1[22]`` + - This value plus 1 specifies the height of the i-th tile row in units of coding + tree blocks. + * - __s8 + - ``pps_beta_offset_div2`` + - Specifies the default deblocking parameter offsets for beta divided by 2. + * - __s8 + - ``pps_tc_offset_div2`` + - Specifies the default deblocking parameter offsets for tC divided by 2. + * - __u8 + - ``log2_parallel_merge_level_minus2`` + - This value plus 2 specifies the value of the variable Log2ParMrgLevel. + * - __u8 + - ``padding[4]`` + - Applications and drivers must set this to zero. + * - __u64 + - ``flags`` + - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>` + +.. _hevc_pps_flags: + +``Picture Parameter Set Flags`` + +.. raw:: latex + + \small + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED`` + - 0x00000001 + - + * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT`` + - 0x00000002 + - + * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED`` + - 0x00000004 + - + * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT`` + - 0x00000008 + - + * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED`` + - 0x00000010 + - + * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED`` + - 0x00000020 + - + * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED`` + - 0x00000040 + - + * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT`` + - 0x00000080 + - + * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED`` + - 0x00000100 + - + * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED`` + - 0x00000200 + - + * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED`` + - 0x00000400 + - + * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED`` + - 0x00000800 + - + * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED`` + - 0x00001000 + - + * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED`` + - 0x00002000 + - + * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED`` + - 0x00004000 + - + * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED`` + - 0x00008000 + - + * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER`` + - 0x00010000 + - + * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT`` + - 0x00020000 + - + * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT`` + - 0x00040000 + - + * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` + - 0x00080000 + - Specifies the presence of deblocking filter control syntax elements in + the PPS + * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING`` + - 0x00100000 + - Specifies that tile column boundaries and likewise tile row boundaries + are distributed uniformly across the picture + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (struct)`` + Specifies various slice-specific parameters, especially from the NAL unit + header, general slice segment header and weighted prediction parameter + parts of the bitstream. + These bitstream parameters are defined according to :ref:`hevc`. + They are described in section 7.4.7 "General slice segment header + semantics" of the specification. + This control is a dynamically sized 1-dimensional array, + V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it. + +.. c:type:: v4l2_ctrl_hevc_slice_params + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_slice_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``bit_size`` + - Size (in bits) of the current slice data. + * - __u32 + - ``data_byte_offset`` + - Offset (in byte) to the video data in the current slice data. + * - __u32 + - ``num_entry_point_offsets`` + - Specifies the number of entry point offset syntax elements in the slice header. + When the driver supports it, the ``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS`` + must be set. + * - __u8 + - ``nal_unit_type`` + - Specifies the coding type of the slice (B, P or I). + * - __u8 + - ``nuh_temporal_id_plus1`` + - Minus 1 specifies a temporal identifier for the NAL unit. + * - __u8 + - ``slice_type`` + - + (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or + V4L2_HEVC_SLICE_TYPE_B). + * - __u8 + - ``colour_plane_id`` + - Specifies the colour plane associated with the current slice. + * - __s32 + - ``slice_pic_order_cnt`` + - Specifies the picture order count. + * - __u8 + - ``num_ref_idx_l0_active_minus1`` + - This value plus 1 specifies the maximum reference index for reference picture list 0 + that may be used to decode the slice. + * - __u8 + - ``num_ref_idx_l1_active_minus1`` + - This value plus 1 specifies the maximum reference index for reference picture list 1 + that may be used to decode the slice. + * - __u8 + - ``collocated_ref_idx`` + - Specifies the reference index of the collocated picture used for + temporal motion vector prediction. + * - __u8 + - ``five_minus_max_num_merge_cand`` + - Specifies the maximum number of merging motion vector prediction + candidates supported in the slice subtracted from 5. + * - __s8 + - ``slice_qp_delta`` + - Specifies the initial value of QpY to be used for the coding blocks in the slice. + * - __s8 + - ``slice_cb_qp_offset`` + - Specifies a difference to be added to the value of pps_cb_qp_offset. + * - __s8 + - ``slice_cr_qp_offset`` + - Specifies a difference to be added to the value of pps_cr_qp_offset. + * - __s8 + - ``slice_act_y_qp_offset`` + - Specifies the offset to the luma of quantization parameter qP derived in section 8.6.2 + * - __s8 + - ``slice_act_cb_qp_offset`` + - Specifies the offset to the cb of quantization parameter qP derived in section 8.6.2 + * - __s8 + - ``slice_act_cr_qp_offset`` + - Specifies the offset to the cr of quantization parameter qP derived in section 8.6.2 + * - __s8 + - ``slice_beta_offset_div2`` + - Specifies the deblocking parameter offsets for beta divided by 2. + * - __s8 + - ``slice_tc_offset_div2`` + - Specifies the deblocking parameter offsets for tC divided by 2. + * - __u8 + - ``pic_struct`` + - Indicates whether a picture should be displayed as a frame or as one or more fields. + * - __u32 + - ``slice_segment_addr`` + - Specifies the address of the first coding tree block in the slice segment. + * - __u8 + - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The list of L0 reference elements as indices in the DPB. + * - __u8 + - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The list of L1 reference elements as indices in the DPB. + * - __u16 + - ``short_term_ref_pic_set_size`` + - Specifies the size, in bits, of the short-term reference picture set, described as st_ref_pic_set() + in the specification, included in the slice header or SPS (section 7.3.6.1). + * - __u16 + - ``long_term_ref_pic_set_size`` + - Specifies the size, in bits, of the long-term reference picture set include in the slice header + or SPS. It is the number of bits in the conditional block if(long_term_ref_pics_present_flag) + in section 7.3.6.1 of the specification. + * - __u8 + - ``padding`` + - Applications and drivers must set this to zero. + * - struct :c:type:`v4l2_hevc_pred_weight_table` + - ``pred_weight_table`` + - The prediction weight coefficients for inter-picture prediction. + * - __u64 + - ``flags`` + - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` + +.. raw:: latex + + \normalsize + +.. _hevc_slice_params_flags: + +``Slice Parameters Flags`` + +.. raw:: latex + + \scriptsize + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA`` + - 0x00000001 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA`` + - 0x00000002 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED`` + - 0x00000004 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO`` + - 0x00000008 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT`` + - 0x00000010 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0`` + - 0x00000020 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV`` + - 0x00000040 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED`` + - 0x00000080 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED`` + - 0x00000100 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT`` + - 0x00000200 + - + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (integer)`` + Specifies entry point offsets in bytes. + This control is a dynamically sized array. The number of entry point + offsets is reported by the ``elems`` field. + This bitstream parameter is defined according to :ref:`hevc`. + They are described in section 7.4.7.1 "General slice segment header + semantics" of the specification. + When multiple slices are submitted in a request, the length of + this array must be the sum of num_entry_point_offsets of all the + slices in the request. + +``V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (struct)`` + Specifies the HEVC scaling matrix parameters used for the scaling process + for transform coefficients. + These matrix and parameters are defined according to :ref:`hevc`. + They are described in section 7.4.5 "Scaling list data semantics" of + the specification. + +.. c:type:: v4l2_ctrl_hevc_scaling_matrix + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``scaling_list_4x4[6][16]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_8x8[6][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_16x16[6][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_32x32[2][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_dc_coef_16x16[6]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_dc_coef_32x32[2]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + +.. raw:: latex + + \normalsize + +.. c:type:: v4l2_hevc_dpb_entry + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}| + +.. flat-table:: struct v4l2_hevc_dpb_entry + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u64 + - ``timestamp`` + - Timestamp of the V4L2 capture buffer to use as reference, used + with B-coded and P-coded frames. The timestamp refers to the + ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the + :c:func:`v4l2_timeval_to_ns()` function to convert the struct + :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. + * - __u8 + - ``flags`` + - Long term flag for the reference frame + (V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE). The flag is set as + described in the ITU HEVC specification chapter "8.3.2 Decoding + process for reference picture set". + * - __u8 + - ``field_pic`` + - Whether the reference is a field picture or a frame. + See :ref:`HEVC dpb field pic Flags <hevc_dpb_field_pic_flags>` + * - __s32 + - ``pic_order_cnt_val`` + - The picture order count of the current picture. + * - __u8 + - ``padding[2]`` + - Applications and drivers must set this to zero. + +.. raw:: latex + + \normalsize + +.. _hevc_dpb_field_pic_flags: + +``HEVC dpb field pic Flags`` + +.. raw:: latex + + \scriptsize + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME`` + - 0 + - (progressive) Frame + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD`` + - 1 + - Top field + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD`` + - 2 + - Bottom field + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM`` + - 3 + - Top field, bottom field, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP`` + - 4 + - Bottom field, top field, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP`` + - 5 + - Top field, bottom field, top field repeated, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM`` + - 6 + - Bottom field, top field, bottom field repeated, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING`` + - 7 + - Frame doubling + * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING`` + - 8 + - Frame tripling + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM`` + - 9 + - Top field paired with previous bottom field in output order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP`` + - 10 + - Bottom field paired with previous top field in output order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM`` + - 11 + - Top field paired with next bottom field in output order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP`` + - 12 + - Bottom field paired with next top field in output order + +.. c:type:: v4l2_hevc_pred_weight_table + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}| + +.. flat-table:: struct v4l2_hevc_pred_weight_table + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s8 + - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The difference of the weighting factor applied to the luma + prediction value for list 0. + * - __s8 + - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The additive offset applied to the luma prediction value for list 0. + * - __s8 + - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the weighting factor applied to the chroma + prediction value for list 0. + * - __s8 + - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the additive offset applied to the chroma + prediction values for list 0. + * - __s8 + - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The difference of the weighting factor applied to the luma + prediction value for list 1. + * - __s8 + - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The additive offset applied to the luma prediction value for list 1. + * - __s8 + - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the weighting factor applied to the chroma + prediction value for list 1. + * - __s8 + - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the additive offset applied to the chroma + prediction values for list 1. + * - __u8 + - ``luma_log2_weight_denom`` + - The base 2 logarithm of the denominator for all luma weighting + factors. + * - __s8 + - ``delta_chroma_log2_weight_denom`` + - The difference of the base 2 logarithm of the denominator for + all chroma weighting factors. + * - __u8 + - ``padding[6]`` + - Applications and drivers must set this to zero. + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_DECODE_MODE (enum)`` + Specifies the decoding mode to use. Currently exposes slice-based and + frame-based decoding but new modes might be added later on. + This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE + pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE + are required to set this control in order to specify the decoding mode + that is expected for the buffer. + Drivers may expose a single or multiple decoding modes, depending + on what they can support. + +.. c:type:: v4l2_stateless_hevc_decode_mode + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED`` + - 0 + - Decoding is done at the slice granularity. + The OUTPUT buffer must contain a single slice. + * - ``V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED`` + - 1 + - Decoding is done at the frame granularity. + The OUTPUT buffer must contain all slices needed to decode the + frame. + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_START_CODE (enum)`` + Specifies the HEVC slice start code expected for each slice. + This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE + pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE + are required to set this control in order to specify the start code + that is expected for the buffer. + Drivers may expose a single or multiple start codes, depending + on what they can support. + +.. c:type:: v4l2_stateless_hevc_start_code + +.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_STATELESS_HEVC_START_CODE_NONE`` + - 0 + - Selecting this value specifies that HEVC slices are passed + to the driver without any start code. The bitstream data should be + according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence + contains emulation prevention bytes when required. + * - ``V4L2_STATELESS_HEVC_START_CODE_ANNEX_B`` + - 1 + - Selecting this value specifies that HEVC slices are expected + to be prefixed by Annex B start codes. According to :ref:`hevc` + valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. + +.. raw:: latex + + \normalsize + +``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)`` + Specifies a priority identifier for the NAL unit, which will be applied to + the base layer. By default this value is set to 0 for the base layer, + and the next layer will have the priority ID assigned as 1, 2, 3 and so on. + The video encoder can't decide the priority id to be applied to a layer, + so this has to come from client. + This is applicable to H264 and valid Range is from 0 to 63. + Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. + +``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)`` + Specifies the maximum number of Long Term Reference (LTR) frames at any + given time that the encoder can keep. + This is applicable to the H264 and HEVC encoders. + +``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)`` + After setting this control the frame that will be queued next + will be marked as a Long Term Reference (LTR) frame + and given this LTR index which ranges from 0 to LTR_COUNT-1. + This is applicable to the H264 and HEVC encoders. + Source Rec. ITU-T H.264 (06/2019); Table 7.9 + +``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)`` + Specifies the Long Term Reference (LTR) frame(s) to be used for + encoding the next frame queued after setting this control. + This provides a bitmask which consists of bits [0, LTR_COUNT-1]. + This is applicable to the H264 and HEVC encoders. + +``V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (struct)`` + Specifies various decode parameters, especially the references picture order + count (POC) for all the lists (short, long, before, current, after) and the + number of entries for each of them. + These parameters are defined according to :ref:`hevc`. + They are described in section 8.3 "Slice decoding process" of the + specification. + +.. c:type:: v4l2_ctrl_hevc_decode_params + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_decode_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s32 + - ``pic_order_cnt_val`` + - PicOrderCntVal as described in section 8.3.1 "Decoding process + for picture order count" of the specification. + * - __u16 + - ``short_term_ref_pic_set_size`` + - Specifies the size, in bits, of the short-term reference picture set, of the first slice + described as st_ref_pic_set() in the specification, included in the slice header + or SPS (section 7.3.6.1). + * - __u16 + - ``long_term_ref_pic_set_size`` + - Specifies the size, in bits, of the long-term reference picture set, of the first slice + included in the slice header or SPS. It is the number of bits in the conditional block + if(long_term_ref_pics_present_flag) in section 7.3.6.1 of the specification. + * - __u8 + - ``num_active_dpb_entries`` + - The number of entries in ``dpb``. + * - __u8 + - ``num_poc_st_curr_before`` + - The number of reference pictures in the short-term set that come before + the current frame. + * - __u8 + - ``num_poc_st_curr_after`` + - The number of reference pictures in the short-term set that come after + the current frame. + * - __u8 + - ``num_poc_lt_curr`` + - The number of reference pictures in the long-term set. + * - __u8 + - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference + picture set": provides the index of the short term before references in DPB array. + * - __u8 + - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference + picture set": provides the index of the short term after references in DPB array. + * - __u8 + - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - PocLtCurr as described in section 8.3.2 "Decoding process for reference + picture set": provides the index of the long term references in DPB array. + * - struct :c:type:`v4l2_hevc_dpb_entry` + - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The decoded picture buffer, for meta-data about reference frames. + * - __u64 + - ``flags`` + - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>` + +.. _hevc_decode_params_flags: + +``Decode Parameters Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC`` + - 0x00000001 + - + * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC`` + - 0x00000002 + - + * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR`` + - 0x00000004 + - diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 6183f43f4d73..2a165ae063fb 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -2658,783 +2658,3 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - Indicates whether to generate SPS and PPS at every IDR. Setting it to 0 disables generating SPS and PPS at every IDR. Setting it to one enables generating SPS and PPS at every IDR. - -.. _v4l2-mpeg-hevc: - -``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)`` - Specifies the Sequence Parameter Set fields (as extracted from the - bitstream) for the associated HEVC slice data. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.3.2 "Sequence parameter set RBSP - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_sps - -.. raw:: latex - - \small - -.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_sps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u16 - - ``pic_width_in_luma_samples`` - - - * - __u16 - - ``pic_height_in_luma_samples`` - - - * - __u8 - - ``bit_depth_luma_minus8`` - - - * - __u8 - - ``bit_depth_chroma_minus8`` - - - * - __u8 - - ``log2_max_pic_order_cnt_lsb_minus4`` - - - * - __u8 - - ``sps_max_dec_pic_buffering_minus1`` - - - * - __u8 - - ``sps_max_num_reorder_pics`` - - - * - __u8 - - ``sps_max_latency_increase_plus1`` - - - * - __u8 - - ``log2_min_luma_coding_block_size_minus3`` - - - * - __u8 - - ``log2_diff_max_min_luma_coding_block_size`` - - - * - __u8 - - ``log2_min_luma_transform_block_size_minus2`` - - - * - __u8 - - ``log2_diff_max_min_luma_transform_block_size`` - - - * - __u8 - - ``max_transform_hierarchy_depth_inter`` - - - * - __u8 - - ``max_transform_hierarchy_depth_intra`` - - - * - __u8 - - ``pcm_sample_bit_depth_luma_minus1`` - - - * - __u8 - - ``pcm_sample_bit_depth_chroma_minus1`` - - - * - __u8 - - ``log2_min_pcm_luma_coding_block_size_minus3`` - - - * - __u8 - - ``log2_diff_max_min_pcm_luma_coding_block_size`` - - - * - __u8 - - ``num_short_term_ref_pic_sets`` - - - * - __u8 - - ``num_long_term_ref_pics_sps`` - - - * - __u8 - - ``chroma_format_idc`` - - - * - __u8 - - ``sps_max_sub_layers_minus1`` - - - * - __u64 - - ``flags`` - - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` - -.. raw:: latex - - \normalsize - -.. _hevc_sps_flags: - -``Sequence Parameter Set Flags`` - -.. raw:: latex - - \small - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE`` - - 0x00000001 - - - * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED`` - - 0x00000002 - - - * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET`` - - 0x00000008 - - - * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED`` - - 0x00000010 - - - * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED`` - - 0x00000020 - - - * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT`` - - 0x00000040 - - - * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED`` - - 0x00000080 - - - * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED`` - - 0x00000100 - - - -.. raw:: latex - - \normalsize - -``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)`` - Specifies the Picture Parameter Set fields (as extracted from the - bitstream) for the associated HEVC slice data. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.3.3 "Picture parameter set RBSP - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_pps - -.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_pps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``num_extra_slice_header_bits`` - - - * - __u8 - - ``num_ref_idx_l0_default_active_minus1`` - - Specifies the inferred value of num_ref_idx_l0_active_minus1 - * - __u8 - - ``num_ref_idx_l1_default_active_minus1`` - - Specifies the inferred value of num_ref_idx_l1_active_minus1 - * - __s8 - - ``init_qp_minus26`` - - - * - __u8 - - ``diff_cu_qp_delta_depth`` - - - * - __s8 - - ``pps_cb_qp_offset`` - - - * - __s8 - - ``pps_cr_qp_offset`` - - - * - __u8 - - ``num_tile_columns_minus1`` - - - * - __u8 - - ``num_tile_rows_minus1`` - - - * - __u8 - - ``column_width_minus1[20]`` - - - * - __u8 - - ``row_height_minus1[22]`` - - - * - __s8 - - ``pps_beta_offset_div2`` - - - * - __s8 - - ``pps_tc_offset_div2`` - - - * - __u8 - - ``log2_parallel_merge_level_minus2`` - - - * - __u8 - - ``padding[4]`` - - Applications and drivers must set this to zero. - * - __u64 - - ``flags`` - - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>` - -.. _hevc_pps_flags: - -``Picture Parameter Set Flags`` - -.. raw:: latex - - \small - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED`` - - 0x00000001 - - - * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT`` - - 0x00000002 - - - * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT`` - - 0x00000008 - - - * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED`` - - 0x00000010 - - - * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED`` - - 0x00000020 - - - * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED`` - - 0x00000040 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT`` - - 0x00000080 - - - * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED`` - - 0x00000100 - - - * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED`` - - 0x00000200 - - - * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED`` - - 0x00000400 - - - * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED`` - - 0x00000800 - - - * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED`` - - 0x00001000 - - - * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED`` - - 0x00002000 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED`` - - 0x00004000 - - - * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED`` - - 0x00008000 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER`` - - 0x00010000 - - - * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT`` - - 0x00020000 - - - * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT`` - - 0x00040000 - - - * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` - - 0x00080000 - - Specifies the presence of deblocking filter control syntax elements in - the PPS - * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING`` - - 0x00100000 - - Specifies that tile column boundaries and likewise tile row boundaries - are distributed uniformly across the picture - -.. raw:: latex - - \normalsize - -``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)`` - Specifies various slice-specific parameters, especially from the NAL unit - header, general slice segment header and weighted prediction parameter - parts of the bitstream. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.7 "General slice segment header - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_slice_params - -.. raw:: latex - - \scriptsize - -.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_slice_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u32 - - ``bit_size`` - - Size (in bits) of the current slice data. - * - __u32 - - ``data_bit_offset`` - - Offset (in bits) to the video data in the current slice data. - * - __u8 - - ``nal_unit_type`` - - - * - __u8 - - ``nuh_temporal_id_plus1`` - - - * - __u8 - - ``slice_type`` - - - (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or - V4L2_HEVC_SLICE_TYPE_B). - * - __u8 - - ``colour_plane_id`` - - - * - __u16 - - ``slice_pic_order_cnt`` - - - * - __u8 - - ``num_ref_idx_l0_active_minus1`` - - - * - __u8 - - ``num_ref_idx_l1_active_minus1`` - - - * - __u8 - - ``collocated_ref_idx`` - - - * - __u8 - - ``five_minus_max_num_merge_cand`` - - - * - __s8 - - ``slice_qp_delta`` - - - * - __s8 - - ``slice_cb_qp_offset`` - - - * - __s8 - - ``slice_cr_qp_offset`` - - - * - __s8 - - ``slice_act_y_qp_offset`` - - - * - __s8 - - ``slice_act_cb_qp_offset`` - - - * - __s8 - - ``slice_act_cr_qp_offset`` - - - * - __s8 - - ``slice_beta_offset_div2`` - - - * - __s8 - - ``slice_tc_offset_div2`` - - - * - __u8 - - ``pic_struct`` - - - * - __u32 - - ``slice_segment_addr`` - - - * - __u8 - - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The list of L0 reference elements as indices in the DPB. - * - __u8 - - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The list of L1 reference elements as indices in the DPB. - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - * - struct :c:type:`v4l2_hevc_pred_weight_table` - - ``pred_weight_table`` - - The prediction weight coefficients for inter-picture prediction. - * - __u64 - - ``flags`` - - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` - -.. raw:: latex - - \normalsize - -.. _hevc_slice_params_flags: - -``Slice Parameters Flags`` - -.. raw:: latex - - \scriptsize - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA`` - - 0x00000001 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA`` - - 0x00000002 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO`` - - 0x00000008 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT`` - - 0x00000010 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0`` - - 0x00000020 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV`` - - 0x00000040 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED`` - - 0x00000080 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED`` - - 0x00000100 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT`` - - 0x00000200 - - - -.. raw:: latex - - \normalsize - -``V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX (struct)`` - Specifies the HEVC scaling matrix parameters used for the scaling process - for transform coefficients. - These matrix and parameters are defined according to :ref:`hevc`. - They are described in section 7.4.5 "Scaling list data semantics" of - the specification. - -.. c:type:: v4l2_ctrl_hevc_scaling_matrix - -.. raw:: latex - - \scriptsize - -.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``scaling_list_4x4[6][16]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_8x8[6][64]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_16x16[6][64]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_32x32[2][64]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_dc_coef_16x16[6]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - * - __u8 - - ``scaling_list_dc_coef_32x32[2]`` - - Scaling list is used for the scaling process for transform - coefficients. The values on each scaling list are expected - in raster scan order. - -.. raw:: latex - - \normalsize - -.. c:type:: v4l2_hevc_dpb_entry - -.. raw:: latex - - \small - -.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}| - -.. flat-table:: struct v4l2_hevc_dpb_entry - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``timestamp`` - - Timestamp of the V4L2 capture buffer to use as reference, used - with B-coded and P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u8 - - ``flags`` - - Long term flag for the reference frame - (V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE). The flag is set as - described in the ITU HEVC specification chapter "8.3.2 Decoding - process for reference picture set". - * - __u8 - - ``field_pic`` - - Whether the reference is a field picture or a frame. - * - __u16 - - ``pic_order_cnt[2]`` - - The picture order count of the reference. Only the first element of the - array is used for frame pictures, while the first element identifies the - top field and the second the bottom field in field-coded pictures. - * - __u8 - - ``padding[2]`` - - Applications and drivers must set this to zero. - -.. raw:: latex - - \normalsize - -.. c:type:: v4l2_hevc_pred_weight_table - -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}| - -.. flat-table:: struct v4l2_hevc_pred_weight_table - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``luma_log2_weight_denom`` - - - * - __s8 - - ``delta_chroma_log2_weight_denom`` - - - * - __s8 - - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __s8 - - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __s8 - - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __s8 - - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __u8 - - ``padding[6]`` - - Applications and drivers must set this to zero. - -.. raw:: latex - - \normalsize - -``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)`` - Specifies the decoding mode to use. Currently exposes slice-based and - frame-based decoding but new modes might be added later on. - This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE - pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE - are required to set this control in order to specify the decoding mode - that is expected for the buffer. - Drivers may expose a single or multiple decoding modes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_hevc_decode_mode - -.. raw:: latex - - \small - -.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED`` - - 0 - - Decoding is done at the slice granularity. - The OUTPUT buffer must contain a single slice. - * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED`` - - 1 - - Decoding is done at the frame granularity. - The OUTPUT buffer must contain all slices needed to decode the - frame. The OUTPUT buffer must also contain both fields. - -.. raw:: latex - - \normalsize - -``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)`` - Specifies the HEVC slice start code expected for each slice. - This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE - pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE - are required to set this control in order to specify the start code - that is expected for the buffer. - Drivers may expose a single or multiple start codes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_hevc_start_code - -.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE`` - - 0 - - Selecting this value specifies that HEVC slices are passed - to the driver without any start code. The bitstream data should be - according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence - contains emulation prevention bytes when required. - * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B`` - - 1 - - Selecting this value specifies that HEVC slices are expected - to be prefixed by Annex B start codes. According to :ref:`hevc` - valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. - -``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)`` - Specifies a priority identifier for the NAL unit, which will be applied to - the base layer. By default this value is set to 0 for the base layer, - and the next layer will have the priority ID assigned as 1, 2, 3 and so on. - The video encoder can't decide the priority id to be applied to a layer, - so this has to come from client. - This is applicable to H264 and valid Range is from 0 to 63. - Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. - -``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)`` - Specifies the maximum number of Long Term Reference (LTR) frames at any - given time that the encoder can keep. - This is applicable to the H264 and HEVC encoders. - -``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)`` - After setting this control the frame that will be queued next - will be marked as a Long Term Reference (LTR) frame - and given this LTR index which ranges from 0 to LTR_COUNT-1. - This is applicable to the H264 and HEVC encoders. - Source Rec. ITU-T H.264 (06/2019); Table 7.9 - -``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)`` - Specifies the Long Term Reference (LTR) frame(s) to be used for - encoding the next frame queued after setting this control. - This provides a bitmask which consists of bits [0, LTR_COUNT-1]. - This is applicable to the H264 and HEVC encoders. - -``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS (struct)`` - Specifies various decode parameters, especially the references picture order - count (POC) for all the lists (short, long, before, current, after) and the - number of entries for each of them. - These parameters are defined according to :ref:`hevc`. - They are described in section 8.3 "Slice decoding process" of the - specification. - -.. c:type:: v4l2_ctrl_hevc_decode_params - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_decode_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s32 - - ``pic_order_cnt_val`` - - PicOrderCntVal as described in section 8.3.1 "Decoding process - for picture order count" of the specification. - * - __u8 - - ``num_active_dpb_entries`` - - The number of entries in ``dpb``. - * - struct :c:type:`v4l2_hevc_dpb_entry` - - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The decoded picture buffer, for meta-data about reference frames. - * - __u8 - - ``num_poc_st_curr_before`` - - The number of reference pictures in the short-term set that come before - the current frame. - * - __u8 - - ``num_poc_st_curr_after`` - - The number of reference pictures in the short-term set that come after - the current frame. - * - __u8 - - ``num_poc_lt_curr`` - - The number of reference pictures in the long-term set. - * - __u8 - - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference - picture set": provides the index of the short term before references in DPB array. - * - __u8 - - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference - picture set": provides the index of the short term after references in DPB array. - * - __u8 - - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - PocLtCurr as described in section 8.3.2 "Decoding process for reference - picture set": provides the index of the long term references in DPB array. - * - __u64 - - ``flags`` - - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>` - -.. _hevc_decode_params_flags: - -``Decode Parameters Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC`` - - 0x00000001 - - - * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC`` - - 0x00000002 - - - * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR`` - - 0x00000004 - - diff --git a/Documentation/userspace-api/media/v4l/mmap.rst b/Documentation/userspace-api/media/v4l/mmap.rst index 16b1e13b029f..a5672573dd6f 100644 --- a/Documentation/userspace-api/media/v4l/mmap.rst +++ b/Documentation/userspace-api/media/v4l/mmap.rst @@ -232,7 +232,7 @@ In the write loop, when the application runs out of free buffers, it must wait until an empty buffer can be dequeued and reused. To enqueue and dequeue a buffer applications use the -:ref:`VIVIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` +:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` and :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. The status of a buffer being mapped, enqueued, full or empty can be determined at any time using the :ref:`VIDIOC_QUERYBUF` ioctl. Two methods exist to suspend execution of the application until one or more diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst index 967fc803ef94..506dd3c98884 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst @@ -212,14 +212,9 @@ Compressed Formats ``V4L2_CID_MPEG_VIDEO_HEVC_SPS``, ``V4L2_CID_MPEG_VIDEO_HEVC_PPS``, and ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS``. - See the :ref:`associated Codec Control IDs <v4l2-mpeg-hevc>`. + See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-hevc>`. Buffers associated with this pixel format must contain the appropriate number of macroblocks to decode a full corresponding frame. - - .. note:: - - This format is not yet part of the public kernel API and it - is expected to change. * .. _V4L2-PIX-FMT-FWHT: - ``V4L2_PIX_FMT_FWHT`` diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst index 65520c3af7cf..bf283a1b5581 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst @@ -220,6 +220,26 @@ the second byte and Y'\ :sub:`7-0` in the third byte. - Y'\ :sub:`7-0` - X\ :sub:`7-0` + * .. _V4L2-PIX-FMT-YUVA32: + + - ``V4L2_PIX_FMT_YUVA32`` + - 'YUVA' + + - Y'\ :sub:`7-0` + - Cb\ :sub:`7-0` + - Cr\ :sub:`7-0` + - A\ :sub:`7-0` + + * .. _V4L2-PIX-FMT-YUVX32: + + - ``V4L2_PIX_FMT_YUVX32`` + - 'YUVX' + + - Y'\ :sub:`7-0` + - Cb\ :sub:`7-0` + - Cr\ :sub:`7-0` + - X\ :sub:`7-0` + * .. _V4L2-PIX-FMT-YUV24: - ``V4L2_PIX_FMT_YUV24`` diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index 8dff5906639b..10b1feeb0b57 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -109,6 +109,20 @@ All components are stored with the same number of bits per component. - Cb, Cr - No - 16x16 tiles + * - V4L2_PIX_FMT_P010 + - 'P010' + - 10 + - 4:2:0 + - Cb, Cr + - Yes + - Linear + * - V4L2_PIX_FMT_P010_4L4 + - 'T010' + - 10 + - 4:2:0 + - Cb, Cr + - Yes + - 4x4 tiles * - V4L2_PIX_FMT_NV16 - 'NV16' - 8 @@ -171,6 +185,7 @@ horizontally. .. _V4L2-PIX-FMT-NV21: .. _V4L2-PIX-FMT-NV12M: .. _V4L2-PIX-FMT-NV21M: +.. _V4L2-PIX-FMT-P010: NV12, NV21, NV12M and NV21M --------------------------- @@ -519,6 +534,50 @@ number of lines as the luma plane. - Cb\ :sub:`33` - Cr\ :sub:`33` +.. _V4L2_PIX_FMT_P010: +.. _V4L2-PIX-FMT-P010-4L4: + +P010 and tiled P010 +------------------- + +P010 is like NV12 with 10 bits per component, expanded to 16 bits. +Data in the 10 high bits, zeros in the 6 low bits, arranged in little endian order. + +.. flat-table:: Sample 4x4 P010 Image + :header-rows: 0 + :stub-columns: 0 + + * - start + 0: + - Y'\ :sub:`00` + - Y'\ :sub:`01` + - Y'\ :sub:`02` + - Y'\ :sub:`03` + * - start + 8: + - Y'\ :sub:`10` + - Y'\ :sub:`11` + - Y'\ :sub:`12` + - Y'\ :sub:`13` + * - start + 16: + - Y'\ :sub:`20` + - Y'\ :sub:`21` + - Y'\ :sub:`22` + - Y'\ :sub:`23` + * - start + 24: + - Y'\ :sub:`30` + - Y'\ :sub:`31` + - Y'\ :sub:`32` + - Y'\ :sub:`33` + * - start + 32: + - Cb\ :sub:`00` + - Cr\ :sub:`00` + - Cb\ :sub:`01` + - Cr\ :sub:`01` + * - start + 40: + - Cb\ :sub:`10` + - Cr\ :sub:`10` + - Cb\ :sub:`11` + - Cr\ :sub:`11` + Fully Planar YUV Formats ======================== @@ -538,6 +597,10 @@ relationship between the luma and chroma line padding and stride. All components are stored with the same number of bits per component. +``V4L2_PIX_FMT_P010_4L4`` stores pixels in 4x4 tiles, and stores tiles linearly +in memory. The line stride must be aligned to multiple of 8 and image height to +a multiple of 4. The layouts of the luma and chroma planes are identical. + .. raw:: latex \small diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst index 29971a45a2d4..892cfeb8b988 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst @@ -249,6 +249,26 @@ still cause this situation. - ``p_hdr10_mastering`` - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_mastering_display`. Valid if this control is of type ``V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY``. + * - struct :c:type:`v4l2_ctrl_hevc_sps` * + - ``p_hevc_sps`` + - A pointer to a struct :c:type:`v4l2_ctrl_hevc_sps`. Valid if this + control is of type ``V4L2_CTRL_TYPE_HEVC_SPS``. + * - struct :c:type:`v4l2_ctrl_hevc_pps` * + - ``p_hevc_pps`` + - A pointer to a struct :c:type:`v4l2_ctrl_hevc_pps`. Valid if this + control is of type ``V4L2_CTRL_TYPE_HEVC_PPS``. + * - struct :c:type:`v4l2_ctrl_hevc_slice_params` * + - ``p_hevc_slice_params`` + - A pointer to a struct :c:type:`v4l2_ctrl_hevc_slice_params`. Valid if this + control is of type ``V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS``. + * - struct :c:type:`v4l2_ctrl_hevc_scaling_matrix` * + - ``p_hevc_scaling_matrix`` + - A pointer to a struct :c:type:`v4l2_ctrl_hevc_scaling_matrix`. Valid if this + control is of type ``V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX``. + * - struct :c:type:`v4l2_ctrl_hevc_decode_params` * + - ``p_hevc_decode_params`` + - A pointer to a struct :c:type:`v4l2_ctrl_hevc_decode_params`. Valid if this + control is of type ``V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS``. * - void * - ``ptr`` - A pointer to a compound type which can be an N-dimensional array diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst index 88f630252d98..a20dfa2a933b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst @@ -625,6 +625,14 @@ See also the examples in :ref:`control`. ``V4L2_CTRL_FLAG_GRABBED`` flag when buffers are allocated or streaming is in progress since most drivers do not support changing the format in that case. + * - ``V4L2_CTRL_FLAG_DYNAMIC_ARRAY`` + - 0x0800 + - This control is a dynamically sized 1-dimensional array. It + behaves the same as a regular array, except that the number + of elements as reported by the ``elems`` field is between 1 and + ``dims[0]``. So setting the control with a differently sized + array will change the ``elems`` field when the control is + queried afterwards. Return Value ============ diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions index 9cbb7a0c354a..64b2c0b1f666 100644 --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions @@ -70,6 +70,7 @@ replace symbol V4L2_COLORSPACE_REC709 :c:type:`v4l2_colorspace` replace symbol V4L2_COLORSPACE_SMPTE170M :c:type:`v4l2_colorspace` replace symbol V4L2_COLORSPACE_SMPTE240M :c:type:`v4l2_colorspace` replace symbol V4L2_COLORSPACE_SRGB :c:type:`v4l2_colorspace` +replace symbol V4L2_COLORSPACE_LAST :c:type:`v4l2_colorspace` # Documented enum v4l2_xfer_func replace symbol V4L2_XFER_FUNC_709 :c:type:`v4l2_xfer_func` @@ -81,6 +82,7 @@ replace symbol V4L2_XFER_FUNC_NONE :c:type:`v4l2_xfer_func` replace symbol V4L2_XFER_FUNC_SMPTE2084 :c:type:`v4l2_xfer_func` replace symbol V4L2_XFER_FUNC_SMPTE240M :c:type:`v4l2_xfer_func` replace symbol V4L2_XFER_FUNC_SRGB :c:type:`v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_LAST :c:type:`v4l2_xfer_func` # Documented enum v4l2_ycbcr_encoding replace symbol V4L2_YCBCR_ENC_601 :c:type:`v4l2_ycbcr_encoding` @@ -92,6 +94,7 @@ replace symbol V4L2_YCBCR_ENC_SYCC :c:type:`v4l2_ycbcr_encoding` replace symbol V4L2_YCBCR_ENC_XV601 :c:type:`v4l2_ycbcr_encoding` replace symbol V4L2_YCBCR_ENC_XV709 :c:type:`v4l2_ycbcr_encoding` replace symbol V4L2_YCBCR_ENC_SMPTE240M :c:type:`v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_LAST :c:type:`v4l2_ycbcr_encoding` # Documented enum v4l2_hsv_encoding replace symbol V4L2_HSV_ENC_180 :c:type:`v4l2_hsv_encoding` @@ -153,6 +156,11 @@ replace symbol V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR :c:type:`v4l2_ctrl_type` replace symbol V4L2_CTRL_TYPE_VP9_FRAME :c:type:`v4l2_ctrl_type` replace symbol V4L2_CTRL_TYPE_HDR10_CLL_INFO :c:type:`v4l2_ctrl_type` replace symbol V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS :c:type:`v4l2_ctrl_type` # V4L2 capability defines replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities @@ -379,6 +387,7 @@ replace define V4L2_CTRL_FLAG_VOLATILE control-flags replace define V4L2_CTRL_FLAG_HAS_PAYLOAD control-flags replace define V4L2_CTRL_FLAG_EXECUTE_ON_WRITE control-flags replace define V4L2_CTRL_FLAG_MODIFY_LAYOUT control-flags +replace define V4L2_CTRL_FLAG_DYNAMIC_ARRAY control-flags replace define V4L2_CTRL_FLAG_NEXT_CTRL control replace define V4L2_CTRL_FLAG_NEXT_COMPOUND control |