diff options
Diffstat (limited to 'Documentation/video4linux/ov511.txt')
| -rw-r--r-- | Documentation/video4linux/ov511.txt | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/Documentation/video4linux/ov511.txt b/Documentation/video4linux/ov511.txt index 142741e3c578..79af610d4ba5 100644 --- a/Documentation/video4linux/ov511.txt +++ b/Documentation/video4linux/ov511.txt @@ -81,7 +81,7 @@ MODULE PARAMETERS: TYPE: integer (Boolean) DEFAULT: 1 DESC: Brightness is normally under automatic control and can't be set - manually by the video app. Set to 0 for manual control. + manually by the video app. Set to 0 for manual control. NAME: autogain TYPE: integer (Boolean) @@ -97,13 +97,13 @@ MODULE PARAMETERS: TYPE: integer (0-6) DEFAULT: 3 DESC: Sets the threshold for printing debug messages. The higher the value, - the more is printed. The levels are cumulative, and are as follows: - 0=no debug messages - 1=init/detection/unload and other significant messages - 2=some warning messages - 3=config/control function calls - 4=most function calls and data parsing messages - 5=highly repetitive mesgs + the more is printed. The levels are cumulative, and are as follows: + 0=no debug messages + 1=init/detection/unload and other significant messages + 2=some warning messages + 3=config/control function calls + 4=most function calls and data parsing messages + 5=highly repetitive mesgs NAME: snapshot TYPE: integer (Boolean) @@ -116,24 +116,24 @@ MODULE PARAMETERS: TYPE: integer (1-4 for OV511, 1-31 for OV511+) DEFAULT: 1 DESC: Number of cameras allowed to stream simultaneously on a single bus. - Values higher than 1 reduce the data rate of each camera, allowing two - or more to be used at once. If you have a complicated setup involving - both OV511 and OV511+ cameras, trial-and-error may be necessary for - finding the optimum setting. + Values higher than 1 reduce the data rate of each camera, allowing two + or more to be used at once. If you have a complicated setup involving + both OV511 and OV511+ cameras, trial-and-error may be necessary for + finding the optimum setting. NAME: compress TYPE: integer (Boolean) DEFAULT: 0 DESC: Set this to 1 to turn on the camera's compression engine. This can - potentially increase the frame rate at the expense of quality, if you - have a fast CPU. You must load the proper compression module for your - camera before starting your application (ov511_decomp or ov518_decomp). + potentially increase the frame rate at the expense of quality, if you + have a fast CPU. You must load the proper compression module for your + camera before starting your application (ov511_decomp or ov518_decomp). NAME: testpat TYPE: integer (Boolean) DEFAULT: 0 DESC: This configures the camera's sensor to transmit a colored test-pattern - instead of an image. This does not work correctly yet. + instead of an image. This does not work correctly yet. NAME: dumppix TYPE: integer (0-2) |