diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/DocBook/80211.tmpl | 495 | ||||
| -rw-r--r-- | Documentation/DocBook/Makefile | 2 | ||||
| -rw-r--r-- | Documentation/DocBook/mac80211.tmpl | 337 | ||||
| -rw-r--r-- | Documentation/feature-removal-schedule.txt | 9 | ||||
| -rw-r--r-- | Documentation/networking/bonding.txt | 8 | ||||
| -rw-r--r-- | Documentation/networking/can.txt | 12 | ||||
| -rw-r--r-- | Documentation/networking/dccp.txt | 29 | ||||
| -rw-r--r-- | Documentation/networking/ip-sysctl.txt | 27 | ||||
| -rw-r--r-- | Documentation/networking/phonet.txt | 56 | ||||
| -rw-r--r-- | Documentation/networking/timestamping.txt | 22 |
10 files changed, 639 insertions, 358 deletions
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl new file mode 100644 index 000000000000..19a1210c2530 --- /dev/null +++ b/Documentation/DocBook/80211.tmpl @@ -0,0 +1,495 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> +<set> + <setinfo> + <title>The 802.11 subsystems – for kernel developers</title> + <subtitle> + Explaining wireless 802.11 networking in the Linux kernel + </subtitle> + + <copyright> + <year>2007-2009</year> + <holder>Johannes Berg</holder> + </copyright> + + <authorgroup> + <author> + <firstname>Johannes</firstname> + <surname>Berg</surname> + <affiliation> + <address><email>johannes@sipsolutions.net</email></address> + </affiliation> + </author> + </authorgroup> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + </para> + <para> + This documentation is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + <para> + You should have received a copy of the GNU General Public + License along with this documentation; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + + <abstract> + <para> + These books attempt to give a description of the + various subsystems that play a role in 802.11 wireless + networking in Linux. Since these books are for kernel + developers they attempts to document the structures + and functions used in the kernel as well as giving a + higher-level overview. + </para> + <para> + The reader is expected to be familiar with the 802.11 + standard as published by the IEEE in 802.11-2007 (or + possibly later versions). References to this standard + will be given as "802.11-2007 8.1.5". + </para> + </abstract> + </setinfo> + <book id="cfg80211-developers-guide"> + <bookinfo> + <title>The cfg80211 subsystem</title> + + <abstract> +!Pinclude/net/cfg80211.h Introduction + </abstract> + </bookinfo> + <chapter> + <title>Device registration</title> +!Pinclude/net/cfg80211.h Device registration +!Finclude/net/cfg80211.h ieee80211_band +!Finclude/net/cfg80211.h ieee80211_channel_flags +!Finclude/net/cfg80211.h ieee80211_channel +!Finclude/net/cfg80211.h ieee80211_rate_flags +!Finclude/net/cfg80211.h ieee80211_rate +!Finclude/net/cfg80211.h ieee80211_sta_ht_cap +!Finclude/net/cfg80211.h ieee80211_supported_band +!Finclude/net/cfg80211.h cfg80211_signal_type +!Finclude/net/cfg80211.h wiphy_params_flags +!Finclude/net/cfg80211.h wiphy_flags +!Finclude/net/cfg80211.h wiphy +!Finclude/net/cfg80211.h wireless_dev +!Finclude/net/cfg80211.h wiphy_new +!Finclude/net/cfg80211.h wiphy_register +!Finclude/net/cfg80211.h wiphy_unregister +!Finclude/net/cfg80211.h wiphy_free + +!Finclude/net/cfg80211.h wiphy_name +!Finclude/net/cfg80211.h wiphy_dev +!Finclude/net/cfg80211.h wiphy_priv +!Finclude/net/cfg80211.h priv_to_wiphy +!Finclude/net/cfg80211.h set_wiphy_dev +!Finclude/net/cfg80211.h wdev_priv + </chapter> + <chapter> + <title>Actions and configuration</title> +!Pinclude/net/cfg80211.h Actions and configuration +!Finclude/net/cfg80211.h cfg80211_ops +!Finclude/net/cfg80211.h vif_params +!Finclude/net/cfg80211.h key_params +!Finclude/net/cfg80211.h survey_info_flags +!Finclude/net/cfg80211.h survey_info +!Finclude/net/cfg80211.h beacon_parameters +!Finclude/net/cfg80211.h plink_actions +!Finclude/net/cfg80211.h station_parameters +!Finclude/net/cfg80211.h station_info_flags +!Finclude/net/cfg80211.h rate_info_flags +!Finclude/net/cfg80211.h rate_info +!Finclude/net/cfg80211.h station_info +!Finclude/net/cfg80211.h monitor_flags +!Finclude/net/cfg80211.h mpath_info_flags +!Finclude/net/cfg80211.h mpath_info +!Finclude/net/cfg80211.h bss_parameters +!Finclude/net/cfg80211.h ieee80211_txq_params +!Finclude/net/cfg80211.h cfg80211_crypto_settings +!Finclude/net/cfg80211.h cfg80211_auth_request +!Finclude/net/cfg80211.h cfg80211_assoc_request +!Finclude/net/cfg80211.h cfg80211_deauth_request +!Finclude/net/cfg80211.h cfg80211_disassoc_request +!Finclude/net/cfg80211.h cfg80211_ibss_params +!Finclude/net/cfg80211.h cfg80211_connect_params +!Finclude/net/cfg80211.h cfg80211_pmksa +!Finclude/net/cfg80211.h cfg80211_send_rx_auth +!Finclude/net/cfg80211.h cfg80211_send_auth_timeout +!Finclude/net/cfg80211.h __cfg80211_auth_canceled +!Finclude/net/cfg80211.h cfg80211_send_rx_assoc +!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout +!Finclude/net/cfg80211.h cfg80211_send_deauth +!Finclude/net/cfg80211.h __cfg80211_send_deauth +!Finclude/net/cfg80211.h cfg80211_send_disassoc +!Finclude/net/cfg80211.h __cfg80211_send_disassoc +!Finclude/net/cfg80211.h cfg80211_ibss_joined +!Finclude/net/cfg80211.h cfg80211_connect_result +!Finclude/net/cfg80211.h cfg80211_roamed +!Finclude/net/cfg80211.h cfg80211_disconnected +!Finclude/net/cfg80211.h cfg80211_ready_on_channel +!Finclude/net/cfg80211.h cfg80211_remain_on_channel_expired +!Finclude/net/cfg80211.h cfg80211_new_sta +!Finclude/net/cfg80211.h cfg80211_rx_mgmt +!Finclude/net/cfg80211.h cfg80211_mgmt_tx_status +!Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify +!Finclude/net/cfg80211.h cfg80211_michael_mic_failure + </chapter> + <chapter> + <title>Scanning and BSS list handling</title> +!Pinclude/net/cfg80211.h Scanning and BSS list handling +!Finclude/net/cfg80211.h cfg80211_ssid +!Finclude/net/cfg80211.h cfg80211_scan_request +!Finclude/net/cfg80211.h cfg80211_scan_done +!Finclude/net/cfg80211.h cfg80211_bss +!Finclude/net/cfg80211.h cfg80211_inform_bss_frame +!Finclude/net/cfg80211.h cfg80211_inform_bss +!Finclude/net/cfg80211.h cfg80211_unlink_bss +!Finclude/net/cfg80211.h cfg80211_find_ie +!Finclude/net/cfg80211.h ieee80211_bss_get_ie + </chapter> + <chapter> + <title>Utility functions</title> +!Pinclude/net/cfg80211.h Utility functions +!Finclude/net/cfg80211.h ieee80211_channel_to_frequency +!Finclude/net/cfg80211.h ieee80211_frequency_to_channel +!Finclude/net/cfg80211.h ieee80211_get_channel +!Finclude/net/cfg80211.h ieee80211_get_response_rate +!Finclude/net/cfg80211.h ieee80211_hdrlen +!Finclude/net/cfg80211.h ieee80211_get_hdrlen_from_skb +!Finclude/net/cfg80211.h ieee80211_radiotap_iterator + </chapter> + <chapter> + <title>Data path helpers</title> +!Pinclude/net/cfg80211.h Data path helpers +!Finclude/net/cfg80211.h ieee80211_data_to_8023 +!Finclude/net/cfg80211.h ieee80211_data_from_8023 +!Finclude/net/cfg80211.h ieee80211_amsdu_to_8023s +!Finclude/net/cfg80211.h cfg80211_classify8021d + </chapter> + <chapter> + <title>Regulatory enforcement infrastructure</title> +!Pinclude/net/cfg80211.h Regulatory enforcement infrastructure +!Finclude/net/cfg80211.h regulatory_hint +!Finclude/net/cfg80211.h wiphy_apply_custom_regulatory +!Finclude/net/cfg80211.h freq_reg_info + </chapter> + <chapter> + <title>RFkill integration</title> +!Pinclude/net/cfg80211.h RFkill integration +!Finclude/net/cfg80211.h wiphy_rfkill_set_hw_state +!Finclude/net/cfg80211.h wiphy_rfkill_start_polling +!Finclude/net/cfg80211.h wiphy_rfkill_stop_polling + </chapter> + <chapter> + <title>Test mode</title> +!Pinclude/net/cfg80211.h Test mode +!Finclude/net/cfg80211.h cfg80211_testmode_alloc_reply_skb +!Finclude/net/cfg80211.h cfg80211_testmode_reply +!Finclude/net/cfg80211.h cfg80211_testmode_alloc_event_skb +!Finclude/net/cfg80211.h cfg80211_testmode_event + </chapter> + </book> + <book id="mac80211-developers-guide"> + <bookinfo> + <title>The mac80211 subsystem</title> + <abstract> +!Pinclude/net/mac80211.h Introduction +!Pinclude/net/mac80211.h Warning + </abstract> + </bookinfo> + + <toc></toc> + + <!-- + Generally, this document shall be ordered by increasing complexity. + It is important to note that readers should be able to read only + the first few sections to get a working driver and only advanced + usage should require reading the full document. + --> + + <part> + <title>The basic mac80211 driver interface</title> + <partintro> + <para> + You should read and understand the information contained + within this part of the book while implementing a driver. + In some chapters, advanced usage is noted, that may be + skipped at first. + </para> + <para> + This part of the book only covers station and monitor mode + functionality, additional information required to implement + the other modes is covered in the second part of the book. + </para> + </partintro> + + <chapter id="basics"> + <title>Basic hardware handling</title> + <para>TBD</para> + <para> + This chapter shall contain information on getting a hw + struct allocated and registered with mac80211. + </para> + <para> + Since it is required to allocate rates/modes before registering + a hw struct, this chapter shall also contain information on setting + up the rate/mode structs. + </para> + <para> + Additionally, some discussion about the callbacks and + the general programming model should be in here, including + the definition of ieee80211_ops which will be referred to + a lot. + </para> + <para> + Finally, a discussion of hardware capabilities should be done + with references to other parts of the book. + </para> + <!-- intentionally multiple !F lines to get proper order --> +!Finclude/net/mac80211.h ieee80211_hw +!Finclude/net/mac80211.h ieee80211_hw_flags +!Finclude/net/mac80211.h SET_IEEE80211_DEV +!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR +!Finclude/net/mac80211.h ieee80211_ops +!Finclude/net/mac80211.h ieee80211_alloc_hw +!Finclude/net/mac80211.h ieee80211_register_hw +!Finclude/net/mac80211.h ieee80211_get_tx_led_name +!Finclude/net/mac80211.h ieee80211_get_rx_led_name +!Finclude/net/mac80211.h ieee80211_get_assoc_led_name +!Finclude/net/mac80211.h ieee80211_get_radio_led_name +!Finclude/net/mac80211.h ieee80211_unregister_hw +!Finclude/net/mac80211.h ieee80211_free_hw + </chapter> + + <chapter id="phy-handling"> + <title>PHY configuration</title> + <para>TBD</para> + <para> + This chapter should describe PHY handling including + start/stop callbacks and the various structures used. + </para> +!Finclude/net/mac80211.h ieee80211_conf +!Finclude/net/mac80211.h ieee80211_conf_flags + </chapter> + + <chapter id="iface-handling"> + <title>Virtual interfaces</title> + <para>TBD</para> + <para> + This chapter should describe virtual interface basics + that are relevant to the driver (VLANs, MGMT etc are not.) + It should explain the use of the add_iface/remove_iface + callbacks as well as the interface configuration callbacks. + </para> + <para>Things related to AP mode should be discussed there.</para> + <para> + Things related to supporting multiple interfaces should be + in the appropriate chapter, a BIG FAT note should be here about + this though and the recommendation to allow only a single + interface in STA mode at first! + </para> +!Finclude/net/mac80211.h ieee80211_vif + </chapter> + + <chapter id="rx-tx"> + <title>Receive and transmit processing</title> + <sect1> + <title>what should be here</title> + <para>TBD</para> + <para> + This should describe the receive and transmit + paths in mac80211/the drivers as well as + transmit status handling. + </para> + </sect1> + <sect1> + <title>Frame format</title> +!Pinclude/net/mac80211.h Frame format + </sect1> + <sect1> + <title>Packet alignment</title> +!Pnet/mac80211/rx.c Packet alignment + </sect1> + <sect1> + <title>Calling into mac80211 from interrupts</title> +!Pinclude/net/mac80211.h Calling mac80211 from interrupts + </sect1> + <sect1> + <title>functions/definitions</title> +!Finclude/net/mac80211.h ieee80211_rx_status +!Finclude/net/mac80211.h mac80211_rx_flags +!Finclude/net/mac80211.h ieee80211_tx_info +!Finclude/net/mac80211.h ieee80211_rx +!Finclude/net/mac80211.h ieee80211_rx_irqsafe +!Finclude/net/mac80211.h ieee80211_tx_status +!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe +!Finclude/net/mac80211.h ieee80211_rts_get +!Finclude/net/mac80211.h ieee80211_rts_duration +!Finclude/net/mac80211.h ieee80211_ctstoself_get +!Finclude/net/mac80211.h ieee80211_ctstoself_duration +!Finclude/net/mac80211.h ieee80211_generic_frame_duration +!Finclude/net/mac80211.h ieee80211_wake_queue +!Finclude/net/mac80211.h ieee80211_stop_queue +!Finclude/net/mac80211.h ieee80211_wake_queues +!Finclude/net/mac80211.h ieee80211_stop_queues + </sect1> + </chapter> + + <chapter id="filters"> + <title>Frame filtering</title> +!Pinclude/net/mac80211.h Frame filtering +!Finclude/net/mac80211.h ieee80211_filter_flags + </chapter> + </part> + + <part id="advanced"> + <title>Advanced driver interface</title> + <partintro> + <para> + Information contained within this part of the book is + of interest only for advanced interaction of mac80211 + with drivers to exploit more hardware capabilities and + improve performance. + </para> + </partintro> + + <chapter id="hardware-crypto-offload"> + <title>Hardware crypto acceleration</title> +!Pinclude/net/mac80211.h Hardware crypto acceleration + <!-- intentionally multiple !F lines to get proper order --> +!Finclude/net/mac80211.h set_key_cmd +!Finclude/net/mac80211.h ieee80211_key_conf +!Finclude/net/mac80211.h ieee80211_key_flags + </chapter> + + <chapter id="powersave"> + <title>Powersave support</title> +!Pinclude/net/mac80211.h Powersave support + </chapter> + + <chapter id="beacon-filter"> + <title>Beacon filter support</title> +!Pinclude/net/mac80211.h Beacon filter support +!Finclude/net/mac80211.h ieee80211_beacon_loss + </chapter> + + <chapter id="qos"> + <title>Multiple queues and QoS support</title> + <para>TBD</para> +!Finclude/net/mac80211.h ieee80211_tx_queue_params + </chapter> + + <chapter id="AP"> + <title>Access point mode support</title> + <para>TBD</para> + <para>Some parts of the if_conf should be discussed here instead</para> + <para> + Insert notes about VLAN interfaces with hw crypto here or + in the hw crypto chapter. + </para> +!Finclude/net/mac80211.h ieee80211_get_buffered_bc +!Finclude/net/mac80211.h ieee80211_beacon_get + </chapter> + + <chapter id="multi-iface"> + <title>Supporting multiple virtual interfaces</title> + <para>TBD</para> + <para> + Note: WDS with identical MAC address should almost always be OK + </para> + <para> + Insert notes about having multiple virtual interfaces with + different MAC addresses here, note which configurations are + supported by mac80211, add notes about supporting hw crypto + with it. + </para> + </chapter> + + <chapter id="hardware-scan-offload"> + <title>Hardware scan offload</title> + <para>TBD</para> +!Finclude/net/mac80211.h ieee80211_scan_completed + </chapter> + </part> + + <part id="rate-control"> + <title>Rate control interface</title> + <partintro> + <para>TBD</para> + <para> + This part of the book describes the rate control algorithm + interface and how it relates to mac80211 and drivers. + </para> + </partintro> + <chapter id="dummy"> + <title>dummy chapter</title> + <para>TBD</para> + </chapter> + </part> + + <part id="internal"> + <title>Internals</title> + <partintro> + <para>TBD</para> + <para> + This part of the book describes mac80211 internals. + </para> + </partintro> + + <chapter id="key-handling"> + <title>Key handling</title> + <sect1> + <title>Key handling basics</title> +!Pnet/mac80211/key.c Key handling basics + </sect1> + <sect1> + <title>MORE TBD</title> + <para>TBD</para> + </sect1> + </chapter> + + <chapter id="rx-processing"> + <title>Receive processing</title> + <para>TBD</para> + </chapter> + + <chapter id="tx-processing"> + <title>Transmit processing</title> + <para>TBD</para> + </chapter> + + <chapter id="sta-info"> + <title>Station info handling</title> + <sect1> + <title>Programming information</title> +!Fnet/mac80211/sta_info.h sta_info +!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags + </sect1> + <sect1> + <title>STA information lifetime rules</title> +!Pnet/mac80211/sta_info.c STA information lifetime rules + </sect1> + </chapter> + + <chapter id="synchronisation"> + <title>Synchronisation</title> + <para>TBD</para> + <para>Locking, lots of RCU</para> + </chapter> + </part> + </book> +</set> diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 34929f24c284..8b6e00a71034 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml sh.xml regulator.xml \ + 80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ tracepoint.xml media.xml drm.xml diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl deleted file mode 100644 index affb15a344a1..000000000000 --- a/Documentation/DocBook/mac80211.tmpl +++ /dev/null @@ -1,337 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" - "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> - -<book id="mac80211-developers-guide"> - <bookinfo> - <title>The mac80211 subsystem for kernel developers</title> - - <authorgroup> - <author> - <firstname>Johannes</firstname> - <surname>Berg</surname> - <affiliation> - <address><email>johannes@sipsolutions.net</email></address> - </affiliation> - </author> - </authorgroup> - - <copyright> - <year>2007-2009</year> - <holder>Johannes Berg</holder> - </copyright> - - <legalnotice> - <para> - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License version 2 as published by the Free Software Foundation. - </para> - - <para> - This documentation is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - </para> - - <para> - You should have received a copy of the GNU General Public - License along with this documentation; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - </para> - - <para> - For more details see the file COPYING in the source - distribution of Linux. - </para> - </legalnotice> - - <abstract> -!Pinclude/net/mac80211.h Introduction -!Pinclude/net/mac80211.h Warning - </abstract> - </bookinfo> - - <toc></toc> - -<!-- -Generally, this document shall be ordered by increasing complexity. -It is important to note that readers should be able to read only -the first few sections to get a working driver and only advanced -usage should require reading the full document. ---> - - <part> - <title>The basic mac80211 driver interface</title> - <partintro> - <para> - You should read and understand the information contained - within this part of the book while implementing a driver. - In some chapters, advanced usage is noted, that may be - skipped at first. - </para> - <para> - This part of the book only covers station and monitor mode - functionality, additional information required to implement - the other modes is covered in the second part of the book. - </para> - </partintro> - - <chapter id="basics"> - <title>Basic hardware handling</title> - <para>TBD</para> - <para> - This chapter shall contain information on getting a hw - struct allocated and registered with mac80211. - </para> - <para> - Since it is required to allocate rates/modes before registering - a hw struct, this chapter shall also contain information on setting - up the rate/mode structs. - </para> - <para> - Additionally, some discussion about the callbacks and - the general programming model should be in here, including - the definition of ieee80211_ops which will be referred to - a lot. - </para> - <para> - Finally, a discussion of hardware capabilities should be done - with references to other parts of the book. - </para> -<!-- intentionally multiple !F lines to get proper order --> -!Finclude/net/mac80211.h ieee80211_hw -!Finclude/net/mac80211.h ieee80211_hw_flags -!Finclude/net/mac80211.h SET_IEEE80211_DEV -!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR -!Finclude/net/mac80211.h ieee80211_ops -!Finclude/net/mac80211.h ieee80211_alloc_hw -!Finclude/net/mac80211.h ieee80211_register_hw -!Finclude/net/mac80211.h ieee80211_get_tx_led_name -!Finclude/net/mac80211.h ieee80211_get_rx_led_name -!Finclude/net/mac80211.h ieee80211_get_assoc_led_name -!Finclude/net/mac80211.h ieee80211_get_radio_led_name -!Finclude/net/mac80211.h ieee80211_unregister_hw -!Finclude/net/mac80211.h ieee80211_free_hw - </chapter> - - <chapter id="phy-handling"> - <title>PHY configuration</title> - <para>TBD</para> - <para> - This chapter should describe PHY handling including - start/stop callbacks and the various structures used. - </para> -!Finclude/net/mac80211.h ieee80211_conf -!Finclude/net/mac80211.h ieee80211_conf_flags - </chapter> - - <chapter id="iface-handling"> - <title>Virtual interfaces</title> - <para>TBD</para> - <para> - This chapter should describe virtual interface basics - that are relevant to the driver (VLANs, MGMT etc are not.) - It should explain the use of the add_iface/remove_iface - callbacks as well as the interface configuration callbacks. - </para> - <para>Things related to AP mode should be discussed there.</para> - <para> - Things related to supporting multiple interfaces should be - in the appropriate chapter, a BIG FAT note should be here about - this though and the recommendation to allow only a single - interface in STA mode at first! - </para> -!Finclude/net/mac80211.h ieee80211_vif - </chapter> - - <chapter id="rx-tx"> - <title>Receive and transmit processing</title> - <sect1> - <title>what should be here</title> - <para>TBD</para> - <para> - This should describe the receive and transmit - paths in mac80211/the drivers as well as - transmit status handling. - </para> - </sect1> - <sect1> - <title>Frame format</title> -!Pinclude/net/mac80211.h Frame format - </sect1> - <sect1> - <title>Packet alignment</title> -!Pnet/mac80211/rx.c Packet alignment - </sect1> - <sect1> - <title>Calling into mac80211 from interrupts</title> -!Pinclude/net/mac80211.h Calling mac80211 from interrupts - </sect1> - <sect1> - <title>functions/definitions</title> -!Finclude/net/mac80211.h ieee80211_rx_status -!Finclude/net/mac80211.h mac80211_rx_flags -!Finclude/net/mac80211.h ieee80211_tx_info -!Finclude/net/mac80211.h ieee80211_rx -!Finclude/net/mac80211.h ieee80211_rx_irqsafe -!Finclude/net/mac80211.h ieee80211_tx_status -!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe -!Finclude/net/mac80211.h ieee80211_rts_get -!Finclude/net/mac80211.h ieee80211_rts_duration -!Finclude/net/mac80211.h ieee80211_ctstoself_get -!Finclude/net/mac80211.h ieee80211_ctstoself_duration -!Finclude/net/mac80211.h ieee80211_generic_frame_duration -!Finclude/net/mac80211.h ieee80211_wake_queue -!Finclude/net/mac80211.h ieee80211_stop_queue -!Finclude/net/mac80211.h ieee80211_wake_queues -!Finclude/net/mac80211.h ieee80211_stop_queues - </sect1> - </chapter> - - <chapter id="filters"> - <title>Frame filtering</title> -!Pinclude/net/mac80211.h Frame filtering -!Finclude/net/mac80211.h ieee80211_filter_flags - </chapter> - </part> - - <part id="advanced"> - <title>Advanced driver interface</title> - <partintro> - <para> - Information contained within this part of the book is - of interest only for advanced interaction of mac80211 - with drivers to exploit more hardware capabilities and - improve performance. - </para> - </partintro> - - <chapter id="hardware-crypto-offload"> - <title>Hardware crypto acceleration</title> -!Pinclude/net/mac80211.h Hardware crypto acceleration -<!-- intentionally multiple !F lines to get proper order --> -!Finclude/net/mac80211.h set_key_cmd -!Finclude/net/mac80211.h ieee80211_key_conf -!Finclude/net/mac80211.h ieee80211_key_alg -!Finclude/net/mac80211.h ieee80211_key_flags - </chapter> - - <chapter id="powersave"> - <title>Powersave support</title> -!Pinclude/net/mac80211.h Powersave support - </chapter> - - <chapter id="beacon-filter"> - <title>Beacon filter support</title> -!Pinclude/net/mac80211.h Beacon filter support -!Finclude/net/mac80211.h ieee80211_beacon_loss - </chapter> - - <chapter id="qos"> - <title>Multiple queues and QoS support</title> - <para>TBD</para> -!Finclude/net/mac80211.h ieee80211_tx_queue_params - </chapter> - - <chapter id="AP"> - <title>Access point mode support</title> - <para>TBD</para> - <para>Some parts of the if_conf should be discussed here instead</para> - <para> - Insert notes about VLAN interfaces with hw crypto here or - in the hw crypto chapter. - </para> -!Finclude/net/mac80211.h ieee80211_get_buffered_bc -!Finclude/net/mac80211.h ieee80211_beacon_get - </chapter> - - <chapter id="multi-iface"> - <title>Supporting multiple virtual interfaces</title> - <para>TBD</para> - <para> - Note: WDS with identical MAC address should almost always be OK - </para> - <para> - Insert notes about having multiple virtual interfaces with - different MAC addresses here, note which configurations are - supported by mac80211, add notes about supporting hw crypto - with it. - </para> - </chapter> - - <chapter id="hardware-scan-offload"> - <title>Hardware scan offload</title> - <para>TBD</para> -!Finclude/net/mac80211.h ieee80211_scan_completed - </chapter> - </part> - - <part id="rate-control"> - <title>Rate control interface</title> - <partintro> - <para>TBD</para> - <para> - This part of the book describes the rate control algorithm - interface and how it relates to mac80211 and drivers. - </para> - </partintro> - <chapter id="dummy"> - <title>dummy chapter</title> - <para>TBD</para> - </chapter> - </part> - - <part id="internal"> - <title>Internals</title> - <partintro> - <para>TBD</para> - <para> - This part of the book describes mac80211 internals. - </para> - </partintro> - - <chapter id="key-handling"> - <title>Key handling</title> - <sect1> - <title>Key handling basics</title> -!Pnet/mac80211/key.c Key handling basics - </sect1> - <sect1> - <title>MORE TBD</title> - <para>TBD</para> - </sect1> - </chapter> - - <chapter id="rx-processing"> - <title>Receive processing</title> - <para>TBD</para> - </chapter> - - <chapter id="tx-processing"> - <title>Transmit processing</title> - <para>TBD</para> - </chapter> - - <chapter id="sta-info"> - <title>Station info handling</title> - <sect1> - <title>Programming information</title> -!Fnet/mac80211/sta_info.h sta_info -!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags - </sect1> - <sect1> - <title>STA information lifetime rules</title> -!Pnet/mac80211/sta_info.c STA information lifetime rules - </sect1> - </chapter> - - <chapter id="synchronisation"> - <title>Synchronisation</title> - <para>TBD</para> - <para>Locking, lots of RCU</para> - </chapter> - </part> -</book> diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 5e2bc4ab897a..9961f1564d22 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -536,3 +536,12 @@ Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> ---------------------------- +What: iwlwifi disable_hw_scan module parameters +When: 2.6.40 +Why: Hareware scan is the prefer method for iwlwifi devices for + scanning operation. Remove software scan support for all the + iwlwifi devices. + +Who: Wey-Yi Guy <wey-yi.w.guy@intel.com> + +---------------------------- diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index d2b62b71b617..5dc638791d97 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -765,6 +765,14 @@ xmit_hash_policy does not exist, and the layer2 policy is the only policy. The layer2+3 value was added for bonding version 3.2.2. +resend_igmp + + Specifies the number of IGMP membership reports to be issued after + a failover event. One membership report is issued immediately after + the failover, subsequent packets are sent in each 200ms interval. + + The valid range is 0 - 255; the default value is 1. This option + was added for bonding version 3.7.0. 3. Configuring Bonding Devices ============================== diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index cd79735013f9..5b04b67ddca2 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -22,6 +22,7 @@ This file contains 4.1.2 RAW socket option CAN_RAW_ERR_FILTER 4.1.3 RAW socket option CAN_RAW_LOOPBACK 4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS + 4.1.5 RAW socket returned message flags 4.2 Broadcast Manager protocol sockets (SOCK_DGRAM) 4.3 connected transport protocols (SOCK_SEQPACKET) 4.4 unconnected transport protocols (SOCK_DGRAM) @@ -471,6 +472,17 @@ solution for a couple of reasons: setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS, &recv_own_msgs, sizeof(recv_own_msgs)); + 4.1.5 RAW socket returned message flags + + When using recvmsg() call, the msg->msg_flags may contain following flags: + + MSG_DONTROUTE: set when the received frame was created on the local host. + + MSG_CONFIRM: set when the frame was sent via the socket it is received on. + This flag can be interpreted as a 'transmission confirmation' when the + CAN driver supports the echo of frames on driver level, see 3.2 and 6.2. + In order to receive such messages, CAN_RAW_RECV_OWN_MSGS must be set. + 4.2 Broadcast Manager protocol sockets (SOCK_DGRAM) 4.3 connected transport protocols (SOCK_SEQPACKET) 4.4 unconnected transport protocols (SOCK_DGRAM) diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index a62fdf7a6bff..271d524a4c8d 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -1,18 +1,20 @@ DCCP protocol -============ +============= Contents ======== - - Introduction - Missing features - Socket options +- Sysctl variables +- IOCTLs +- Other tunables - Notes + Introduction ============ - Datagram Congestion Control Protocol (DCCP) is an unreliable, connection oriented protocol designed to solve issues present in UDP and TCP, particularly for real-time and multimedia (streaming) traffic. @@ -29,9 +31,9 @@ It has a base protocol and pluggable congestion control IDs (CCIDs). DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol is at http://www.ietf.org/html.charters/dccp-charter.html + Missing features ================ - The Linux DCCP implementation does not currently support all the features that are specified in RFCs 4340...42. @@ -45,7 +47,6 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree Socket options ============== - DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of service codes (RFC 4340, sec. 8.1.2); if this socket option is not set, the socket will fall back to 0 (which means that no meaningful service code @@ -112,6 +113,7 @@ DCCP_SOCKOPT_CCID_TX_INFO On unidirectional connections it is useful to close the unused half-connection via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs. + Sysctl variables ================ Several DCCP default parameters can be managed by the following sysctls @@ -155,15 +157,30 @@ sync_ratelimit = 125 ms sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit of this parameter is milliseconds; a value of 0 disables rate-limiting. + IOCTLS ====== FIONREAD Works as in udp(7): returns in the `int' argument pointer the size of the next pending datagram in bytes, or 0 when no datagram is pending. + +Other tunables +============== +Per-route rto_min support + CCID-2 supports the RTAX_RTO_MIN per-route setting for the minimum value + of the RTO timer. This setting can be modified via the 'rto_min' option + of iproute2; for example: + > ip route change 10.0.0.0/24 rto_min 250j dev wlan0 + > ip route add 10.0.0.254/32 rto_min 800j dev wlan0 + > ip route show dev wlan0 + CCID-3 also supports the rto_min setting: it is used to define the lower + bound for the expiry of the nofeedback timer. This can be useful on LANs + with very low RTTs (e.g., loopback, Gbit ethernet). + + Notes ===== - DCCP does not travel through NAT successfully at present on many boxes. This is because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT support for DCCP has been added. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index f350c69b2bb4..c7165f4cb792 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1014,6 +1014,12 @@ conf/interface/*: accept_ra - BOOLEAN Accept Router Advertisements; autoconfigure using them. + Possible values are: + 0 Do not accept Router Advertisements. + 1 Accept Router Advertisements if forwarding is disabled. + 2 Overrule forwarding behaviour. Accept Router Advertisements + even if forwarding is enabled. + Functional default: enabled if local forwarding is disabled. disabled if local forwarding is enabled. @@ -1075,7 +1081,12 @@ forwarding - BOOLEAN Note: It is recommended to have the same setting on all interfaces; mixed router/host scenarios are rather uncommon. - FALSE: + Possible values are: + 0 Forwarding disabled + 1 Forwarding enabled + 2 Forwarding enabled (Hybrid Mode) + + FALSE (0): By default, Host behaviour is assumed. This means: @@ -1085,18 +1096,24 @@ forwarding - BOOLEAN Advertisements (and do autoconfiguration). 4. If accept_redirects is TRUE (default), accept Redirects. - TRUE: + TRUE (1): If local forwarding is enabled, Router behaviour is assumed. This means exactly the reverse from the above: 1. IsRouter flag is set in Neighbour Advertisements. 2. Router Solicitations are not sent. - 3. Router Advertisements are ignored. + 3. Router Advertisements are ignored unless accept_ra is 2. 4. Redirects are ignored. - Default: FALSE if global forwarding is disabled (default), - otherwise TRUE. + TRUE (2): + + Hybrid mode. Same behaviour as TRUE, except for: + + 2. Router Solicitations are being sent when necessary. + + Default: 0 (disabled) if global forwarding is disabled (default), + otherwise 1 (enabled). hop_limit - INTEGER Default Hop Limit to set. diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt index 6e8ce09f9c73..24ad2adba6e5 100644 --- a/Documentation/networking/phonet.txt +++ b/Documentation/networking/phonet.txt @@ -112,6 +112,22 @@ However, connect() and getpeername() are not supported, as they did not seem useful with Phonet usages (could be added easily). +Resource subscription +--------------------- + +A Phonet datagram socket can be subscribed to any number of 8-bits +Phonet resources, as follow: + + uint32_t res = 0xXX; + ioctl(fd, SIOCPNADDRESOURCE, &res); + +Subscription is similarly cancelled using the SIOCPNDELRESOURCE I/O +control request, or when the socket is closed. + +Note that no more than one socket can be subcribed to any given +resource at a time. If not, ioctl() will return EBUSY. + + Phonet Pipe protocol -------------------- @@ -166,6 +182,46 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level: or zero if encapsulation is off. +Phonet Pipe-controller Implementation +------------------------------------- + +Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig +option. It is useful when communicating with those Nokia Modems which do not +implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson +U8500 platform. + +The implementation is based on the Data Connection Establishment Sequence +depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf' +document. + +It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection +between itself and a remote pipe-end point (e.g. modem). + +The implementation adds socket options at SOL_PNPIPE level: + + PNPIPE_PIPE_HANDLE + It accepts an integer argument for setting value of pipe handle. + + PNPIPE_ENABLE accepts one integer value (int). If set to zero, the pipe + is disabled. If the value is non-zero, the pipe is enabled. If the pipe + is not (yet) connected, ENOTCONN is error is returned. + +The implementation also adds socket 'connect'. On calling the 'connect', pipe +will be created between the source socket and the destination, and the pipe +state will be set to PIPE_DISABLED. + +After a pipe has been created and enabled successfully, the Pipe data can be +exchanged between the host-pep and remote-pep (modem). + +User-space would typically follow below sequence with Pipe controller:- +-socket +-bind +-setsockopt for PNPIPE_PIPE_HANDLE +-connect +-setsockopt for PNPIPE_ENCAP_IP +-setsockopt for PNPIPE_ENABLE + + Authors ------- diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index e8c8f4f06c67..98097d8cb910 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt @@ -172,15 +172,19 @@ struct skb_shared_hwtstamps { }; Time stamps for outgoing packets are to be generated as follows: -- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero. - If yes, then the driver is expected to do hardware time stamping. +- In hard_start_xmit(), check if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + is set no-zero. If yes, then the driver is expected to do hardware time + stamping. - If this is possible for the skb and requested, then declare - that the driver is doing the time stamping by setting the field - skb_tx(skb)->in_progress non-zero. You might want to keep a pointer - to the associated skb for the next step and not free the skb. A driver - not supporting hardware time stamping doesn't do that. A driver must - never touch sk_buff::tstamp! It is used to store software generated - time stamps by the network subsystem. + that the driver is doing the time stamping by setting the flag + SKBTX_IN_PROGRESS in skb_shinfo(skb)->tx_flags , e.g. with + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + You might want to keep a pointer to the associated skb for the next step + and not free the skb. A driver not supporting hardware time stamping doesn't + do that. A driver must never touch sk_buff::tstamp! It is used to store + software generated time stamps by the network subsystem. - As soon as the driver has sent the packet and/or obtained a hardware time stamp for it, it passes the time stamp back by calling skb_hwtstamp_tx() with the original skb, the raw @@ -191,6 +195,6 @@ Time stamps for outgoing packets are to be generated as follows: this would occur at a later time in the processing pipeline than other software time stamping and therefore could lead to unexpected deltas between time stamps. -- If the driver did not call set skb_tx(skb)->in_progress, then +- If the driver did not set the SKBTX_IN_PROGRESS flag (see above), then dev_hard_start_xmit() checks whether software time stamping is wanted as fallback and potentially generates the time stamp. |