diff options
Diffstat (limited to 'Documentation')
30 files changed, 406 insertions, 205 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net-dsa b/Documentation/ABI/testing/sysfs-class-net-dsa index f240221e071e..985d84c585c6 100644 --- a/Documentation/ABI/testing/sysfs-class-net-dsa +++ b/Documentation/ABI/testing/sysfs-class-net-dsa @@ -1,4 +1,4 @@ -What: /sys/class/net/<iface>/tagging +What: /sys/class/net/<iface>/dsa/tagging Date: August 2018 KernelVersion: 4.20 Contact: netdev@vger.kernel.org diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 81d1d5a74728..aefd358a5ca3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -856,7 +856,8 @@ causing system reset or hang due to sending INIT from AP to BSP. - disable_counter_freezing [HW] + perf_v4_pmi= [X86,INTEL] + Format: <bool> Disable Intel PMU counter freezing feature. The feature only exists starting from Arch Perfmon v4 (Skylake and newer). @@ -3504,6 +3505,10 @@ before loading. See Documentation/blockdev/ramdisk.txt. + psi= [KNL] Enable or disable pressure stall information + tracking. + Format: <bool> + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for; one of (bare|imps|exps|lifebook|any). psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports @@ -4194,9 +4199,13 @@ spectre_v2= [X86] Control mitigation of Spectre variant 2 (indirect branch speculation) vulnerability. + The default operation protects the kernel from + user space attacks. - on - unconditionally enable - off - unconditionally disable + on - unconditionally enable, implies + spectre_v2_user=on + off - unconditionally disable, implies + spectre_v2_user=off auto - kernel detects whether your CPU model is vulnerable @@ -4206,6 +4215,12 @@ CONFIG_RETPOLINE configuration option, and the compiler with which the kernel was built. + Selecting 'on' will also enable the mitigation + against user space to user space task attacks. + + Selecting 'off' will disable both the kernel and + the user space protections. + Specific mitigations can also be selected manually: retpoline - replace indirect branches @@ -4215,6 +4230,48 @@ Not specifying this option is equivalent to spectre_v2=auto. + spectre_v2_user= + [X86] Control mitigation of Spectre variant 2 + (indirect branch speculation) vulnerability between + user space tasks + + on - Unconditionally enable mitigations. Is + enforced by spectre_v2=on + + off - Unconditionally disable mitigations. Is + enforced by spectre_v2=off + + prctl - Indirect branch speculation is enabled, + but mitigation can be enabled via prctl + per thread. The mitigation control state + is inherited on fork. + + prctl,ibpb + - Like "prctl" above, but only STIBP is + controlled per thread. IBPB is issued + always when switching between different user + space processes. + + seccomp + - Same as "prctl" above, but all seccomp + threads will enable the mitigation unless + they explicitly opt out. + + seccomp,ibpb + - Like "seccomp" above, but only STIBP is + controlled per thread. IBPB is issued + always when switching between different + user space processes. + + auto - Kernel selects the mitigation depending on + the available CPU features and vulnerability. + + Default mitigation: + If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl" + + Not specifying this option is equivalent to + spectre_v2_user=auto. + spec_store_bypass_disable= [HW] Control Speculative Store Bypass (SSB) Disable mitigation (Speculative Store Bypass vulnerability) @@ -4713,6 +4770,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 47153e64dfb5..7eca9026a9ed 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -150,7 +150,7 @@ data structures necessary to handle the given policy and, possibly, to add a governor ``sysfs`` interface to it. Next, the governor is started by invoking its ``->start()`` callback. -That callback it expected to register per-CPU utilization update callbacks for +That callback is expected to register per-CPU utilization update callbacks for all of the online CPUs belonging to the given policy with the CPU scheduler. The utilization update callbacks will be invoked by the CPU scheduler on important events, like task enqueue and dequeue, on every iteration of the diff --git a/Documentation/admin-guide/security-bugs.rst b/Documentation/admin-guide/security-bugs.rst index 164bf71149fd..30187d49dc2c 100644 --- a/Documentation/admin-guide/security-bugs.rst +++ b/Documentation/admin-guide/security-bugs.rst @@ -32,16 +32,17 @@ Disclosure and embargoed information The security list is not a disclosure channel. For that, see Coordination below. -Once a robust fix has been developed, our preference is to release the -fix in a timely fashion, treating it no differently than any of the other -thousands of changes and fixes the Linux kernel project releases every -month. - -However, at the request of the reporter, we will postpone releasing the -fix for up to 5 business days after the date of the report or after the -embargo has lifted; whichever comes first. The only exception to that -rule is if the bug is publicly known, in which case the preference is to -release the fix as soon as it's available. +Once a robust fix has been developed, the release process starts. Fixes +for publicly known bugs are released immediately. + +Although our preference is to release fixes for publicly undisclosed bugs +as soon as they become available, this may be postponed at the request of +the reporter or an affected party for up to 7 calendar days from the start +of the release process, with an exceptional extension to 14 calendar days +if it is agreed that the criticality of the bug requires more time. The +only valid reason for deferring the publication of a fix is to accommodate +the logistics of QA and large scale rollouts which require release +coordination. Whilst embargoed information may be shared with trusted individuals in order to develop a fix, such information will not be published alongside diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index 76ccded8b74c..8f9577621144 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -57,6 +57,7 @@ stable kernels. | ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | | ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 | | ARM | Cortex-A76 | #1188873 | ARM64_ERRATUM_1188873 | +| ARM | Cortex-A76 | #1286807 | ARM64_ERRATUM_1286807 | | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst index a4e705108f42..6a6d67acaf69 100644 --- a/Documentation/core-api/xarray.rst +++ b/Documentation/core-api/xarray.rst @@ -74,7 +74,8 @@ using :c:func:`xa_load`. xa_store will overwrite any entry with the new entry and return the previous entry stored at that index. You can use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a ``NULL`` entry. There is no difference between an entry that has never -been stored to and one that has most recently had ``NULL`` stored to it. +been stored to, one that has been erased and one that has most recently +had ``NULL`` stored to it. You can conditionally replace an entry at an index by using :c:func:`xa_cmpxchg`. Like :c:func:`cmpxchg`, it will only succeed if @@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other indices. Storing into one index may result in the entry retrieved by some, but not all of the other indices changing. +Sometimes you need to ensure that a subsequent call to :c:func:`xa_store` +will not need to allocate memory. The :c:func:`xa_reserve` function +will store a reserved entry at the indicated index. Users of the normal +API will see this entry as containing ``NULL``. If you do not need to +use the reserved entry, you can call :c:func:`xa_release` to remove the +unused entry. If another user has stored to the entry in the meantime, +:c:func:`xa_release` will do nothing; if instead you want the entry to +become ``NULL``, you should use :c:func:`xa_erase`. + +If all entries in the array are ``NULL``, the :c:func:`xa_empty` function +will return ``true``. + Finally, you can remove all entries from an XArray by calling :c:func:`xa_destroy`. If the XArray entries are pointers, you may wish to free the entries first. You can do this by iterating over all present entries in the XArray using the :c:func:`xa_for_each` iterator. -ID assignment -------------- +Allocating XArrays +------------------ + +If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or +initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +the XArray changes to track whether entries are in use or not. You can call :c:func:`xa_alloc` to store the entry at any unused index in the XArray. If you need to modify the array from interrupt context, you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable -interrupts while allocating the ID. Unlike :c:func:`xa_store`, allocating -a ``NULL`` pointer does not delete an entry. Instead it reserves an -entry like :c:func:`xa_reserve` and you can release it using either -:c:func:`xa_erase` or :c:func:`xa_release`. To use ID assignment, the -XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised -by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`, +interrupts while allocating the ID. + +Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert` +will mark the entry as being allocated. Unlike a normal XArray, storing +``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`. +To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if +you only want to free the entry if it's ``NULL``). + +You cannot use ``XA_MARK_0`` with an allocating XArray as this mark +is used to track whether an entry is free or not. The other marks are +available for your use. Memory allocation ----------------- @@ -158,15 +180,22 @@ Takes RCU read lock: Takes xa_lock internally: * :c:func:`xa_store` + * :c:func:`xa_store_bh` + * :c:func:`xa_store_irq` * :c:func:`xa_insert` * :c:func:`xa_erase` * :c:func:`xa_erase_bh` * :c:func:`xa_erase_irq` * :c:func:`xa_cmpxchg` + * :c:func:`xa_cmpxchg_bh` + * :c:func:`xa_cmpxchg_irq` * :c:func:`xa_store_range` * :c:func:`xa_alloc` * :c:func:`xa_alloc_bh` * :c:func:`xa_alloc_irq` + * :c:func:`xa_reserve` + * :c:func:`xa_reserve_bh` + * :c:func:`xa_reserve_irq` * :c:func:`xa_destroy` * :c:func:`xa_set_mark` * :c:func:`xa_clear_mark` @@ -177,6 +206,7 @@ Assumes xa_lock held on entry: * :c:func:`__xa_erase` * :c:func:`__xa_cmpxchg` * :c:func:`__xa_alloc` + * :c:func:`__xa_reserve` * :c:func:`__xa_set_mark` * :c:func:`__xa_clear_mark` @@ -234,7 +264,9 @@ Sharing the XArray with interrupt context is also possible, either using :c:func:`xa_lock_irqsave` in both the interrupt handler and process context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock` in the interrupt handler. Some of the more common patterns have helper -functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`. +functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`, +:c:func:`xa_erase_bh`, :c:func:`xa_erase_irq`, :c:func:`xa_cmpxchg_bh` +and :c:func:`xa_cmpxchg_irq`. Sometimes you need to protect access to the XArray with a mutex because that lock sits above another mutex in the locking hierarchy. That does @@ -322,7 +354,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``. - :c:func:`xa_is_zero` - Zero entries appear as ``NULL`` through the Normal API, but occupy an entry in the XArray which can be used to reserve the index for - future use. + future use. This is used by allocating XArrays for allocated entries + which are ``NULL``. Other internal entries may be added in the future. As far as possible, they will be handled by :c:func:`xas_retry`. diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt index a873855c811d..14378cecb172 100644 --- a/Documentation/cpu-freq/cpufreq-stats.txt +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -86,9 +86,11 @@ transitions. This will give a fine grained information about all the CPU frequency transitions. The cat output here is a two dimensional matrix, where an entry <i,j> (row i, column j) represents the count of number of transitions from -Freq_i to Freq_j. Freq_i is in descending order with increasing rows and -Freq_j is in descending order with increasing columns. The output here also -contains the actual freq values for each row and column for better readability. +Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in +which the driver has provided the frequency table initially to the cpufreq core +and so can be sorted (ascending or descending) or unsorted. The output here +also contains the actual freq values for each row and column for better +readability. If the transition table is bigger than PAGE_SIZE, reading this will return an -EFBIG error. diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 2ec489eebe72..b646bbcf7f92 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -168,3 +168,19 @@ a shared clock is forbidden. Configuration of common clocks, which affect multiple consumer devices can be similarly specified in the clock provider node. + +==Protected clocks== + +Some platforms or firmwares may not fully expose all the clocks to the OS, such +as in situations where those clks are used by drivers running in ARM secure +execution levels. Such a configuration can be specified in device tree with the +protected-clocks property in the form of a clock specifier list. This property should +only be specified in the node that is providing the clocks being protected: + + clock-controller@a000f000 { + compatible = "vendor,clk95; + reg = <0xa000f000 0x1000> + #clocks-cells = <1>; + ... + protected-clocks = <UART3_CLK>, <SPI5_CLK>; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt deleted file mode 100644 index 2aa06ac0fac5..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt +++ /dev/null @@ -1,65 +0,0 @@ -Generic ARM big LITTLE cpufreq driver's DT glue ------------------------------------------------ - -This is DT specific glue layer for generic cpufreq driver for big LITTLE -systems. - -Both required and optional properties listed below must be defined -under node /cpus/cpu@x. Where x is the first cpu inside a cluster. - -FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster -must be present contiguously. Generic DT driver will check only node 'x' for -cpu:x. - -Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt - for details - -Optional properties: -- clock-latency: Specify the possible maximum transition latency for clock, - in unit of nanoseconds. - -Examples: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a15"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@1 { - compatible = "arm,cortex-a15"; - reg = <1>; - next-level-cache = <&L2>; - }; - - cpu@100 { - compatible = "arm,cortex-a7"; - reg = <100>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 950000 - 396000 750000 - 198000 450000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@101 { - compatible = "arm,cortex-a7"; - reg = <101>; - next-level-cache = <&L2>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt index 2bb2626fdb78..1ca6cc5ebf8e 100644 --- a/Documentation/devicetree/bindings/input/input-reset.txt +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define a set of keys. Required property: -sysrq-reset-seq: array of Linux keycodes, one keycode per cell. +keyset: array of Linux keycodes, one keycode per cell. Optional property: timeout-ms: duration keys must be pressed together in milliseconds before diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.txt b/Documentation/devicetree/bindings/media/rockchip-vpu.txt deleted file mode 100644 index 35dc464ad7c8..000000000000 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.txt +++ /dev/null @@ -1,29 +0,0 @@ -device-tree bindings for rockchip VPU codec - -Rockchip (Video Processing Unit) present in various Rockchip platforms, -such as RK3288 and RK3399. - -Required properties: -- compatible: value should be one of the following - "rockchip,rk3288-vpu"; - "rockchip,rk3399-vpu"; -- interrupts: encoding and decoding interrupt specifiers -- interrupt-names: should be "vepu" and "vdpu" -- clocks: phandle to VPU aclk, hclk clocks -- clock-names: should be "aclk" and "hclk" -- power-domains: phandle to power domain node -- iommus: phandle to a iommu node - -Example: -SoC-specific DT entry: - vpu: video-codec@ff9a0000 { - compatible = "rockchip,rk3288-vpu"; - reg = <0x0 0xff9a0000 0x0 0x800>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vepu", "vdpu"; - clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; - clock-names = "aclk", "hclk"; - power-domains = <&power RK3288_PD_VIDEO>; - iommus = <&vpu_mmu>; - }; diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt index 903a78da65be..3a9926f99937 100644 --- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt +++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt @@ -17,7 +17,7 @@ Example: reg = <1>; clocks = <&clk32m>; interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; }; diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index cc4372842bf3..9936b9ee67c3 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -5,6 +5,7 @@ Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -14,26 +15,32 @@ Required properties: "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. + "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 + compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic version. - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 + devices. + phandles and clock specifiers for 3 CAN clock inputs for every other + SoC. +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". + 3 clock input name strings for every other SoC: "clkp1", "clkp2", + "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" -compatible: -In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock -and can be used by both CAN and CAN FD controller at the same time. It needs to -be scaled to maximum frequency if any of these controllers use it. This is done +Required properties for R8A7795, R8A7796 and R8A77965: +For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can +be used by both CAN and CAN FD controller at the same time. It needs to be +scaled to maximum frequency if any of these controllers use it. This is done using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. @@ -42,8 +49,9 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : Externally input clock + <0x1> : Peripheral clock (clkp2) (not supported by + RZ/G2 devices) + <0x3> : External input clock Example ------- diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 3ceeb8de1196..35694c0c376b 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -7,7 +7,7 @@ limitations. Current Binding --------------- -Switches are true Linux devices and can be probes by any means. Once +Switches are true Linux devices and can be probed by any means. Once probed, they register to the DSA framework, passing a node pointer. This node is expected to fulfil the following binding, and may contain additional properties as required by the device it is diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index adf20b2bdf71..fbc198d5dd39 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -40,24 +40,36 @@ Required properties: "ref" for 19.2 MHz ref clk, "com_aux" for phy common block aux clock, "ref_aux" for phy reference aux clock, + + For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". - For "qcom,qmp-v3-usb3-phy" must contain: + For "qcom,sdm845-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-ufs-phy" must contain: + "ref", "ref_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - reset-names: "phy" for reset of phy block, "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset (Optional). + "cfg" for phy's ahb cfg block reset. + + For "qcom,ipq8074-qmp-pcie-phy" must contain: + "phy", "common". For "qcom,msm8996-qmp-pcie-phy" must contain: - "phy", "common", "cfg". + "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,ipq8074-qmp-pcie-phy" must contain: - "phy", "common". + "phy", "common". + For "qcom,sdm845-qmp-usb3-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-ufs-phy": no resets are listed. - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. @@ -79,9 +91,10 @@ Required properties for child node: - #phy-cells: must be 0 +Required properties child node of pcie and usb3 qmp phys: - clocks: a list of phandles and clock-specifier pairs, one for each entry in clock-names. - - clock-names: Must contain following for pcie and usb qmp phys: + - clock-names: Must contain following: "pipe<lane-number>" for pipe clock specific to each lane. - clock-output-names: Name of the PHY clock that will be the parent for the above pipe clock. @@ -91,9 +104,11 @@ Required properties for child node: (or) "pcie20_phy1_pipe_clk" +Required properties for child node of PHYs with lane reset, AKA: + "qcom,msm8996-qmp-pcie-phy" - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - - reset-names: Must contain following for pcie qmp phys: + - reset-names: Must contain following: "lane<lane-number>" for reset specific to each lane. Example: diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt index 504a4ecfc7b1..b04e66a52de5 100644 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt @@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel. Required properties: - compatible: should be "socionext,uniphier-scssi" - reg: address and length of the spi master registers - - #address-cells: must be <1>, see spi-bus.txt - - #size-cells: must be <0>, see spi-bus.txt - - clocks: A phandle to the clock for the device. - - resets: A phandle to the reset control for the device. + - interrupts: a single interrupt specifier + - pinctrl-names: should be "default" + - pinctrl-0: pin control state for the default mode + - clocks: a phandle to the clock for the device + - resets: a phandle to the reset control for the device Example: spi0: spi@54006000 { compatible = "socionext,uniphier-scssi"; reg = <0x54006000 0x100>; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; resets = <&peri_rst 11>; }; diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index cef220c176a4..a8c0873beb95 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst @@ -190,16 +190,7 @@ A few EV_REL codes have special meanings: * REL_WHEEL, REL_HWHEEL: - These codes are used for vertical and horizontal scroll wheels, - respectively. The value is the number of "notches" moved on the wheel, the - physical size of which varies by device. For high-resolution wheels (which - report multiple events for each notch of movement, or do not have notches) - this may be an approximation based on the high-resolution scroll events. - -* REL_WHEEL_HI_RES: - - - If a vertical scroll wheel supports high-resolution scrolling, this code - will be emitted in addition to REL_WHEEL. The value is the (approximate) - distance travelled by the user's finger, in microns. + respectively. EV_ABS ------ diff --git a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst index 0f8b31874002..de131f00c249 100644 --- a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst +++ b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_ioc_request_alloc: diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst index 6dd2d7fea714..5d2604345e19 100644 --- a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst +++ b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_request_ioc_queue: diff --git a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst index febe888494c8..ec61960c81ce 100644 --- a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst +++ b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media_request_ioc_reinit: diff --git a/Documentation/media/uapi/mediactl/request-api.rst b/Documentation/media/uapi/mediactl/request-api.rst index 5f4a23029c48..945113dcb218 100644 --- a/Documentation/media/uapi/mediactl/request-api.rst +++ b/Documentation/media/uapi/mediactl/request-api.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _media-request-api: diff --git a/Documentation/media/uapi/mediactl/request-func-close.rst b/Documentation/media/uapi/mediactl/request-func-close.rst index 098d7f2b9548..dcf3f35bcf17 100644 --- a/Documentation/media/uapi/mediactl/request-func-close.rst +++ b/Documentation/media/uapi/mediactl/request-func-close.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-close: diff --git a/Documentation/media/uapi/mediactl/request-func-ioctl.rst b/Documentation/media/uapi/mediactl/request-func-ioctl.rst index ff7b072a6999..11a22f887843 100644 --- a/Documentation/media/uapi/mediactl/request-func-ioctl.rst +++ b/Documentation/media/uapi/mediactl/request-func-ioctl.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-ioctl: diff --git a/Documentation/media/uapi/mediactl/request-func-poll.rst b/Documentation/media/uapi/mediactl/request-func-poll.rst index 85191254f381..2609fd54d519 100644 --- a/Documentation/media/uapi/mediactl/request-func-poll.rst +++ b/Documentation/media/uapi/mediactl/request-func-poll.rst @@ -1,4 +1,28 @@ -.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections +.. This file is dual-licensed: you can use it either under the terms +.. of the GPL or the GFDL 1.1+ license, at your option. Note that this +.. dual licensing only applies to this file, and not this project as a +.. whole. +.. +.. a) This file is free software; you can redistribute it and/or +.. modify it under the terms of the GNU General Public License as +.. published by the Free Software Foundation; either version 2 of +.. the License, or (at your option) any later version. +.. +.. This file is distributed in the hope that it will be useful, +.. but WITHOUT ANY WARRANTY; without even the implied warranty of +.. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.. GNU General Public License for more details. +.. +.. Or, alternatively, +.. +.. b) Permission is granted to copy, distribute and/or modify this +.. document under the terms of the GNU Free Documentation License, +.. Version 1.1 or any later version published by the Free Software +.. Foundation, with no Invariant Sections, no Front-Cover Texts +.. and no Back-Cover Texts. A copy of the license is included at +.. Documentation/media/uapi/fdl-appendix.rst. +.. +.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections .. _request-func-poll: diff --git a/Documentation/media/uapi/v4l/dev-meta.rst b/Documentation/media/uapi/v4l/dev-meta.rst index f7ac8d0d3af1..b65dc078abeb 100644 --- a/Documentation/media/uapi/v4l/dev-meta.rst +++ b/Documentation/media/uapi/v4l/dev-meta.rst @@ -40,7 +40,7 @@ To use the :ref:`format` ioctls applications set the ``type`` field of the the desired operation. Both drivers and applications must set the remainder of the :c:type:`v4l2_format` structure to 0. -.. _v4l2-meta-format: +.. c:type:: v4l2_meta_format .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}| diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 65a1d873196b..027358b91082 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1505,6 +1505,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - configuring a stateless hardware decoding pipeline for MPEG-2. The bitstream parameters are defined according to :ref:`mpeg2part2`. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + .. c:type:: v4l2_ctrl_mpeg2_slice_params .. cssclass:: longtable @@ -1625,6 +1630,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Specifies quantization matrices (as extracted from the bitstream) for the associated MPEG-2 slice data. + .. note:: + + This compound control is not yet part of the public kernel API and + it is expected to change. + .. c:type:: v4l2_ctrl_mpeg2_quantization .. cssclass:: longtable diff --git a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst index 3ead350e099f..9ea494a8faca 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-fmt.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-fmt.rst @@ -133,6 +133,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical - Definition of a data format, see :ref:`pixfmt`, used by SDR capture and output devices. * - + - struct :c:type:`v4l2_meta_format` + - ``meta`` + - Definition of a metadata format, see :ref:`meta-formats`, used by + metadata capture devices. + * - - __u8 - ``raw_data``\ [200] - Place holder for future extensions. diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 605e00cdd6be..89f1302d593a 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -1056,18 +1056,23 @@ The kernel interface functions are as follows: u32 rxrpc_kernel_check_life(struct socket *sock, struct rxrpc_call *call); + void rxrpc_kernel_probe_life(struct socket *sock, + struct rxrpc_call *call); - This returns a number that is updated when ACKs are received from the peer - (notably including PING RESPONSE ACKs which we can elicit by sending PING - ACKs to see if the call still exists on the server). The caller should - compare the numbers of two calls to see if the call is still alive after - waiting for a suitable interval. + The first function returns a number that is updated when ACKs are received + from the peer (notably including PING RESPONSE ACKs which we can elicit by + sending PING ACKs to see if the call still exists on the server). The + caller should compare the numbers of two calls to see if the call is still + alive after waiting for a suitable interval. This allows the caller to work out if the server is still contactable and if the call is still alive on the server whilst waiting for the server to process a client operation. - This function may transmit a PING ACK. + The second function causes a ping ACK to be transmitted to try to provoke + the peer into responding, which would then cause the value returned by the + first function to change. Note that this must be called in TASK_RUNNING + state. (*) Get reply timestamp. diff --git a/Documentation/userspace-api/spec_ctrl.rst b/Documentation/userspace-api/spec_ctrl.rst index 32f3d55c54b7..c4dbe6f7cdae 100644 --- a/Documentation/userspace-api/spec_ctrl.rst +++ b/Documentation/userspace-api/spec_ctrl.rst @@ -92,3 +92,12 @@ Speculation misfeature controls * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0); + +- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes + (Mitigate Spectre V2 style attacks against user processes) + + Invocations: + * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0); + * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0); diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7727db8f94bc..5e9b826b5f62 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -61,18 +61,6 @@ Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields to struct boot_params for loading bzImage and ramdisk above 4G in 64bit. -Protocol 2.13: (Kernel 3.14) Support 32- and 64-bit flags being set in - xloadflags to support booting a 64-bit kernel from 32-bit - EFI - -Protocol 2.14: (Kernel 4.20) Added acpi_rsdp_addr holding the physical - address of the ACPI RSDP table. - The bootloader updates version with: - 0x8000 | min(kernel-version, bootloader-version) - kernel-version being the protocol version supported by - the kernel and bootloader-version the protocol version - supported by the bootloader. - **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -209,7 +197,6 @@ Offset Proto Name Meaning 0258/8 2.10+ pref_address Preferred loading address 0260/4 2.10+ init_size Linear memory required during initialization 0264/4 2.11+ handover_offset Offset of handover entry point -0268/8 2.14+ acpi_rsdp_addr Physical address of RSDP table (1) For backwards compatibility, if the setup_sects field contains 0, the real value is 4. @@ -322,7 +309,7 @@ Protocol: 2.00+ Contains the magic number "HdrS" (0x53726448). Field name: version -Type: modify +Type: read Offset/size: 0x206/2 Protocol: 2.00+ @@ -330,12 +317,6 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. - Up to protocol version 2.13 this information is only read by the - bootloader. From protocol version 2.14 onwards the bootloader will - write the used protocol version or-ed with 0x8000 to the field. The - used protocol version will be the minimum of the supported protocol - versions of the bootloader and the kernel. - Field name: realmode_swtch Type: modify (optional) Offset/size: 0x208/4 @@ -763,17 +744,6 @@ Offset/size: 0x264/4 See EFI HANDOVER PROTOCOL below for more details. -Field name: acpi_rsdp_addr -Type: write -Offset/size: 0x268/8 -Protocol: 2.14+ - - This field can be set by the boot loader to tell the kernel the - physical address of the ACPI RSDP table. - - A value of 0 indicates the kernel should fall back to the standard - methods to locate the RSDP. - **** THE IMAGE CHECKSUM |