diff options
Diffstat (limited to 'Documentation')
19 files changed, 178 insertions, 98 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 986e44387dad..2ba45caabada 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -653,6 +653,9 @@ cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system + cpufreq.off=1 [CPU_FREQ] + disable the cpufreq sub-system + cpu_init_udelay=N [X86] Delay for N microsec between assert and de-assert of APIC INIT to start processors. This delay occurs @@ -1183,6 +1186,12 @@ functions that can be changed at run time by the set_graph_notrace file in the debugfs tracing directory. + ftrace_graph_max_depth=<uint> + [FTRACE] Used with the function graph tracer. This is + the max depth it will trace into a function. This value + can be changed at run time by the max_graph_depth file + in the tracefs tracing directory. default: 0 (no limit) + gamecon.map[2|3]= [HW,JOY] Multisystem joystick and NES/SNES/PSX pad support via parallel port (up to 5 devices per port) diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index a71b8095dbd8..2f66683500b8 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -68,3 +68,4 @@ stable kernels. | | | | | | Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | | Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 | +| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 | diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt index 3b8449f8ac7e..49d7c997fa1e 100644 --- a/Documentation/cgroup-v2.txt +++ b/Documentation/cgroup-v2.txt @@ -1142,16 +1142,17 @@ used by the kernel. pids.max - A read-write single value file which exists on non-root cgroups. The - default is "max". + A read-write single value file which exists on non-root + cgroups. The default is "max". - Hard limit of number of processes. + Hard limit of number of processes. pids.current - A read-only single value file which exists on all cgroups. + A read-only single value file which exists on all cgroups. - The number of processes currently in the cgroup and its descendants. + The number of processes currently in the cgroup and its + descendants. Organisational operations are not blocked by cgroup policies, so it is possible to have pids.current > pids.max. This can be done by either diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 2c41b713841f..44886c91e112 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims to collect more or less stable coverage that is function of syscall inputs. To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic parts of kernel is -disbled (e.g. scheduler, locking). +disabled (e.g. scheduler, locking). Usage ----- diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt index 30c546900b60..07dbb358182c 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt @@ -45,7 +45,7 @@ The following clocks are available: - 1 15 SATA - 1 16 SATA USB - 1 17 Main - - 1 18 SD/MMC + - 1 18 SD/MMC/GOP - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) - 1 22 USB3H0 - 1 23 USB3H1 @@ -65,7 +65,7 @@ Required properties: "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", - "cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io", + "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; Example: @@ -78,6 +78,6 @@ Example: gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", - "cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io", + "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt index a78265993665..ca5204b3bc21 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt @@ -4,7 +4,6 @@ Required properties: - compatible: value should be one of the following "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ - "samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */ "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ "samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */ "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt index 18645e0228b0..5837402c3ade 100644 --- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt +++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt @@ -11,7 +11,6 @@ Required properties: "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ - "samsung,exynos4415-fimd"; /* for Exynos4415 SoC */ "samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */ "samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */ diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index ea9c1c9607f6..520d61dad6dd 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -13,7 +13,7 @@ Required Properties: - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, before RK3288 - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - - "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108 + - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt deleted file mode 100644 index e68ae5dec9c9..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom USB3 phy binding for northstar plus SoC -The USB3 phy is internal to the SoC and is accessed using mdio interface. - -Required mdio bus properties: -- reg: Should be 0x0 for SoC internal USB3 phy -- #address-cells: must be 1 -- #size-cells: must be 0 - -Required USB3 PHY properties: -- compatible: should be "brcm,nsp-usb3-phy" -- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10. -- usb3-ctrl-syscon: handler of syscon node defining physical address - of usb3 control register. -- #phy-cells: must be 0 - -Required usb3 control properties: -- compatible: should be "brcm,nsp-usb3-ctrl" -- reg: offset and length of the control registers - -Example: - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - usb3_phy: usb-phy@10 { - compatible = "brcm,nsp-usb3-phy"; - reg = <0x10>; - usb3-ctrl-syscon = <&usb3_ctrl>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - usb3_ctrl: syscon@104408 { - compatible = "brcm,nsp-usb3-ctrl", "syscon"; - reg = <0x104408 0x3fc>; - }; diff --git a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt index 712baf6c3e24..44b842b6ca15 100644 --- a/Documentation/devicetree/bindings/powerpc/4xx/emac.txt +++ b/Documentation/devicetree/bindings/powerpc/4xx/emac.txt @@ -71,6 +71,9 @@ For Axon it can be absent, though my current driver doesn't handle phy-address yet so for now, keep 0x00ffffff in it. + - phy-handle : Used to describe configurations where a external PHY + is used. Please refer to: + Documentation/devicetree/bindings/net/ethernet.txt - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec operations (if absent the value is the same as rx-fifo-size). For Axon, either absent or 2048. @@ -81,8 +84,22 @@ offload, phandle of the TAH device node. - tah-channel : 1 cell, optional. If appropriate, channel used on the TAH engine. + - fixed-link : Fixed-link subnode describing a link to a non-MDIO + managed entity. See + Documentation/devicetree/bindings/net/fixed-link.txt + for details. + - mdio subnode : When the EMAC has a phy connected to its local + mdio, which us supported by the kernel's network + PHY library in drivers/net/phy, there must be device + tree subnode with the following required properties: + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. - Example: + For PHY definitions: Please refer to + Documentation/devicetree/bindings/net/phy.txt and + Documentation/devicetree/bindings/net/ethernet.txt + + Examples: EMAC0: ethernet@40000800 { device_type = "network"; @@ -104,6 +121,48 @@ zmii-channel = <0>; }; + EMAC1: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-apm821xx", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH /* Status */ + 1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH /* Wake */>; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + fifo-entry-size = <10>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; + }; + + ii) McMAL node Required properties: @@ -145,4 +204,3 @@ - revision : as provided by the RGMII new version register if available. For Axon: 0x0000012a - diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt index c3f6546ebac7..6a23ad9ac53a 100644 --- a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt @@ -45,7 +45,7 @@ Required Properties: Optional Properties: - reg-names: In addition to the required properties, the following are optional - "efuse-address" - Contains efuse base address used to pick up ABB info. - - "ldo-address" - Contains address of ABB LDO overide register address. + - "ldo-address" - Contains address of ABB LDO override register. "efuse-address" is required for this. - ti,ldovbb-vset-mask - Required if ldo-address is set, mask for LDO override register to provide override vset value. diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 0c065f77658f..3957d4edaa74 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -7,18 +7,18 @@ Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - hub-reset-gpios : Should specify the gpio for hub reset + - reset-gpios : Should specify the gpio for hub reset + - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : - - reg : I2C address on the selected bus (default is <0x2C>) - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : USB Product ID of the hub (16 bit, default depends on type) - - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : USB Language ID (16 bit, default is 0x0000) - - manufacturer : USB Manufacturer string (max 31 characters long) - - product : USB Product string (max 31 characters long) - - serial : USB Serial string (max 31 characters long) + - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) + - product-id : Set USB Product ID of the hub (16 bit, default depends on type) + - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) + - language-id : Set USB Language ID (16 bit, default is 0x0000) + - manufacturer : Set USB Manufacturer string (max 31 characters long) + - product : Set USB Product string (max 31 characters long) + - serial : Set USB Serial string (max 31 characters long) - {bus,self}-powered : selects between self- and bus-powered operation (default is self-powered) - disable-hi-speed : disable USB Hi-Speed support @@ -31,8 +31,10 @@ Optional properties : (default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered operation if the local power source is removed or unavailable - - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) - - compound-device : indicated the hub is part of a compound device + - oc-delay-us : Delay time (in microseconds) for filtering the over-current + sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If + an invalid value is given, the default is used instead. + - compound-device : indicate the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) @@ -40,34 +42,15 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - max-sp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - max-sp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - power-on-time : Specifies the time it takes from the time the host initiates - the power-on sequence to a port until the port has adequate power. The - value is given in ms in a 0 - 510 range (default is 100ms). + - power-on-time-ms : Specifies the time it takes from the time the host + initiates the power-on sequence to a port until the port has adequate + power. The value is given in ms in a 0 - 510 range (default is 100ms). Examples: usb2512b@2c { compatible = "microchip,usb2512b"; - hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; usb2514b@2c { diff --git a/Documentation/extcon/intel-int3496.txt b/Documentation/extcon/intel-int3496.txt index af0b366c25b7..8155dbc7fad3 100644 --- a/Documentation/extcon/intel-int3496.txt +++ b/Documentation/extcon/intel-int3496.txt @@ -20,3 +20,8 @@ Index 1: The output gpio for enabling Vbus output from the device to the otg Index 2: The output gpio for muxing of the data pins between the USB host and the USB peripheral controller, write 1 to mux to the peripheral controller + +There is a mapping between indices and GPIO connection IDs as follows + id index 0 + vbus index 1 + mux index 2 diff --git a/Documentation/gcc-plugins.txt b/Documentation/gcc-plugins.txt index 891c69464434..433eaefb4aa1 100644 --- a/Documentation/gcc-plugins.txt +++ b/Documentation/gcc-plugins.txt @@ -18,8 +18,8 @@ because gcc versions 4.5 and 4.6 are compiled by a C compiler, gcc-4.7 can be compiled by a C or a C++ compiler, and versions 4.8+ can only be compiled by a C++ compiler. -Currently the GCC plugin infrastructure supports only the x86, arm and arm64 -architectures. +Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and +powerpc architectures. This infrastructure was ported from grsecurity [6] and PaX [7]. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index fc73eeb7b3b8..ab0230461377 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1006,7 +1006,8 @@ accept_redirects - BOOLEAN FALSE (router) forwarding - BOOLEAN - Enable IP forwarding on this interface. + Enable IP forwarding on this interface. This controls whether packets + received _on_ this interface can be forwarded. mc_forwarding - BOOLEAN Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt index e4991fb1eedc..41ef9d8efe95 100644 --- a/Documentation/trace/kprobetrace.txt +++ b/Documentation/trace/kprobetrace.txt @@ -12,7 +12,7 @@ kprobes can probe (this means, all functions body except for __kprobes functions). Unlike the Tracepoint based event, this can be added and removed dynamically, on the fly. -To enable this feature, build your kernel with CONFIG_KPROBE_EVENT=y. +To enable this feature, build your kernel with CONFIG_KPROBE_EVENTS=y. Similar to the events tracer, this doesn't need to be activated via current_tracer. Instead of that, add probe points via diff --git a/Documentation/trace/uprobetracer.txt b/Documentation/trace/uprobetracer.txt index fa7b680ee8a0..bf526a7c5559 100644 --- a/Documentation/trace/uprobetracer.txt +++ b/Documentation/trace/uprobetracer.txt @@ -7,7 +7,7 @@ Overview -------- Uprobe based trace events are similar to kprobe based trace events. -To enable this feature, build your kernel with CONFIG_UPROBE_EVENT=y. +To enable this feature, build your kernel with CONFIG_UPROBE_EVENTS=y. Similar to the kprobe-event tracer, this doesn't need to be activated via current_tracer. Instead of that, add probe points via diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 069450938b79..fd106899afd1 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -951,6 +951,10 @@ This ioctl allows the user to create or modify a guest physical memory slot. When changing an existing slot, it may be moved in the guest physical memory space, or its flags may be modified. It may not be resized. Slots may not overlap in guest physical address space. +Bits 0-15 of "slot" specifies the slot id and this value should be +less than the maximum number of user memory slots supported per VM. +The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS, +if this capability is supported by the architecture. If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot" specifies the address space which is being modified. They must be @@ -3373,6 +3377,69 @@ struct kvm_ppc_resize_hpt { __u32 pad; }; +4.104 KVM_X86_GET_MCE_CAP_SUPPORTED + +Capability: KVM_CAP_MCE +Architectures: x86 +Type: system ioctl +Parameters: u64 mce_cap (out) +Returns: 0 on success, -1 on error + +Returns supported MCE capabilities. The u64 mce_cap parameter +has the same format as the MSR_IA32_MCG_CAP register. Supported +capabilities will have the corresponding bits set. + +4.105 KVM_X86_SETUP_MCE + +Capability: KVM_CAP_MCE +Architectures: x86 +Type: vcpu ioctl +Parameters: u64 mcg_cap (in) +Returns: 0 on success, + -EFAULT if u64 mcg_cap cannot be read, + -EINVAL if the requested number of banks is invalid, + -EINVAL if requested MCE capability is not supported. + +Initializes MCE support for use. The u64 mcg_cap parameter +has the same format as the MSR_IA32_MCG_CAP register and +specifies which capabilities should be enabled. The maximum +supported number of error-reporting banks can be retrieved when +checking for KVM_CAP_MCE. The supported capabilities can be +retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED. + +4.106 KVM_X86_SET_MCE + +Capability: KVM_CAP_MCE +Architectures: x86 +Type: vcpu ioctl +Parameters: struct kvm_x86_mce (in) +Returns: 0 on success, + -EFAULT if struct kvm_x86_mce cannot be read, + -EINVAL if the bank number is invalid, + -EINVAL if VAL bit is not set in status field. + +Inject a machine check error (MCE) into the guest. The input +parameter is: + +struct kvm_x86_mce { + __u64 status; + __u64 addr; + __u64 misc; + __u64 mcg_status; + __u8 bank; + __u8 pad1[7]; + __u64 pad2[3]; +}; + +If the MCE being reported is an uncorrected error, KVM will +inject it as an MCE exception into the guest. If the guest +MCG_STATUS register reports that an MCE is in progress, KVM +causes an KVM_EXIT_SHUTDOWN vmexit. + +Otherwise, if the MCE is a corrected error, KVM will just +store it in the corresponding bank (provided this bank is +not holding a previously reported uncorrected error). + 5. The kvm_run structure ------------------------ diff --git a/Documentation/vm/userfaultfd.txt b/Documentation/vm/userfaultfd.txt index 0e5543a920e5..bb2f945f87ab 100644 --- a/Documentation/vm/userfaultfd.txt +++ b/Documentation/vm/userfaultfd.txt @@ -172,10 +172,6 @@ the same read(2) protocol as for the page fault notifications. The manager has to explicitly enable these events by setting appropriate bits in uffdio_api.features passed to UFFDIO_API ioctl: -UFFD_FEATURE_EVENT_EXIT - enable notification about exit() of the -non-cooperative process. When the monitored process exits, the uffd -manager will get UFFD_EVENT_EXIT. - UFFD_FEATURE_EVENT_FORK - enable userfaultfd hooks for fork(). When this feature is enabled, the userfaultfd context of the parent process is duplicated into the newly created process. The manager receives |