diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/serial/uniphier-uart.txt | 3 | ||||
| -rw-r--r-- | Documentation/serial/driver | 2 | ||||
| -rw-r--r-- | Documentation/serial/serial-iso7816.txt | 83 |
4 files changed, 91 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index eaca9da79d83..e52e16c6bc57 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -14,6 +14,10 @@ Required properties: - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. + - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART. + - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART. + - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART. + - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART. - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. @@ -50,6 +54,8 @@ Required properties: - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART. - "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART. + - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART. + - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART. - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt index 0b3892a7a528..7a1bf02bb869 100644 --- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt +++ b/Documentation/devicetree/bindings/serial/uniphier-uart.txt @@ -7,7 +7,7 @@ Required properties: - clocks: phandle to the input clock. Optional properties: -- fifo-size: the RX/TX FIFO size. Defaults to 64 if not specified. +-auto-flow-control: enable automatic flow control support. Example: aliases { @@ -19,5 +19,4 @@ Example: reg = <0x54006800 0x40>; interrupts = <0 33 4>; clocks = <&uart_clk>; - fifo-size = <64>; }; diff --git a/Documentation/serial/driver b/Documentation/serial/driver index da193e092fc3..86e47c19a924 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver @@ -7,7 +7,7 @@ This document is meant as a brief overview of some aspects of the new serial driver. It is not complete, any questions you have should be directed to <rmk@arm.linux.org.uk> -The reference implementation is contained within amba_pl011.c. +The reference implementation is contained within amba-pl011.c. diff --git a/Documentation/serial/serial-iso7816.txt b/Documentation/serial/serial-iso7816.txt new file mode 100644 index 000000000000..3193d24a2b0f --- /dev/null +++ b/Documentation/serial/serial-iso7816.txt @@ -0,0 +1,83 @@ + ISO7816 SERIAL COMMUNICATIONS + +1. INTRODUCTION + + ISO/IEC7816 is a series of standards specifying integrated circuit cards (ICC) + also known as smart cards. + +2. HARDWARE-RELATED CONSIDERATIONS + + Some CPUs/UARTs (e.g., Microchip AT91) contain a built-in mode capable of + handling communication with a smart card. + + For these microcontrollers, the Linux driver should be made capable of + working in both modes, and proper ioctls (see later) should be made + available at user-level to allow switching from one mode to the other, and + vice versa. + +3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL + + The Linux kernel provides the serial_iso7816 structure (see [1]) to handle + ISO7816 communications. This data structure is used to set and configure + ISO7816 parameters in ioctls. + + Any driver for devices capable of working both as RS232 and ISO7816 should + implement the iso7816_config callback in the uart_port structure. The + serial_core calls iso7816_config to do the device specific part in response + to TIOCGISO7816 and TIOCSISO7816 ioctls (see below). The iso7816_config + callback receives a pointer to struct serial_iso7816. + +4. USAGE FROM USER-LEVEL + + From user-level, ISO7816 configuration can be get/set using the previous + ioctls. For instance, to set ISO7816 you can use the following code: + + #include <linux/serial.h> + + /* Include definition for ISO7816 ioctls: TIOCSISO7816 and TIOCGISO7816 */ + #include <sys/ioctl.h> + + /* Open your specific device (e.g., /dev/mydevice): */ + int fd = open ("/dev/mydevice", O_RDWR); + if (fd < 0) { + /* Error handling. See errno. */ + } + + struct serial_iso7816 iso7816conf; + + /* Reserved fields as to be zeroed */ + memset(&iso7816conf, 0, sizeof(iso7816conf)); + + /* Enable ISO7816 mode: */ + iso7816conf.flags |= SER_ISO7816_ENABLED; + + /* Select the protocol: */ + /* T=0 */ + iso7816conf.flags |= SER_ISO7816_T(0); + /* or T=1 */ + iso7816conf.flags |= SER_ISO7816_T(1); + + /* Set the guard time: */ + iso7816conf.tg = 2; + + /* Set the clock frequency*/ + iso7816conf.clk = 3571200; + + /* Set transmission factors: */ + iso7816conf.sc_fi = 372; + iso7816conf.sc_di = 1; + + if (ioctl(fd_usart, TIOCSISO7816, &iso7816conf) < 0) { + /* Error handling. See errno. */ + } + + /* Use read() and write() syscalls here... */ + + /* Close the device when finished: */ + if (close (fd) < 0) { + /* Error handling. See errno. */ + } + +5. REFERENCES + + [1] include/uapi/linux/serial.h |