diff options
Diffstat (limited to 'Documentation')
138 files changed, 2508 insertions, 639 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index c65a80574869..401d202f478b 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -1,4 +1,4 @@ -What: /sys/bus/platform/devices/MLNXBF04:00/driver/lifecycle_state +What: /sys/bus/platform/devices/MLNXBF04:00/lifecycle_state Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -10,7 +10,7 @@ Description: GA Non-Secured - Non-Secure chip and not able to change state RMA - Return Merchandise Authorization -What: /sys/bus/platform/devices/MLNXBF04:00/driver/post_reset_wdog +What: /sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -19,7 +19,7 @@ Description: to reboot the chip and recover it to the old state if the new boot partition fails. -What: /sys/bus/platform/devices/MLNXBF04:00/driver/reset_action +What: /sys/bus/platform/devices/MLNXBF04:00/reset_action Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -30,7 +30,7 @@ Description: emmc - boot from the onchip eMMC emmc_legacy - boot from the onchip eMMC in legacy (slow) mode -What: /sys/bus/platform/devices/MLNXBF04:00/driver/second_reset_action +What: /sys/bus/platform/devices/MLNXBF04:00/second_reset_action Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" @@ -44,7 +44,7 @@ Description: swap_emmc - swap the primary / secondary boot partition none - cancel the action -What: /sys/bus/platform/devices/MLNXBF04:00/driver/secure_boot_fuse_state +What: /sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state Date: Oct 2019 KernelVersion: 5.5 Contact: "Liming Sun <lsun@mellanox.com>" diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst index 594095b54b29..c00f9f11e3f3 100644 --- a/Documentation/admin-guide/device-mapper/dm-integrity.rst +++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst @@ -144,7 +144,7 @@ journal_crypt:algorithm(:key) (the key is optional) Encrypt the journal using given algorithm to make sure that the attacker can't read the journal. You can use a block cipher here (such as "cbc(aes)") or a stream cipher (for example "chacha20", - "salsa20", "ctr(aes)" or "ecb(arc4)"). + "salsa20" or "ctr(aes)"). The journal contains history of last writes to the block device, an attacker reading the journal could see the last sector nubmers diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst index 4872fb6d2952..ec62fcc8eece 100644 --- a/Documentation/admin-guide/device-mapper/index.rst +++ b/Documentation/admin-guide/device-mapper/index.rst @@ -8,6 +8,7 @@ Device Mapper cache-policies cache delay + dm-clone dm-crypt dm-dust dm-flakey diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst index 059ddcbe769d..9bc93f0ce0c9 100644 --- a/Documentation/admin-guide/ext4.rst +++ b/Documentation/admin-guide/ext4.rst @@ -181,14 +181,17 @@ When mounting an ext4 filesystem, the following option are accepted: system after its metadata has been committed to the journal. commit=nrsec (*) - Ext4 can be told to sync all its data and metadata every 'nrsec' - seconds. The default value is 5 seconds. This means that if you lose - your power, you will lose as much as the latest 5 seconds of work (your - filesystem will not be damaged though, thanks to the journaling). This - default value (or any low value) will hurt performance, but it's good - for data-safety. Setting it to 0 will have the same effect as leaving - it at the default (5 seconds). Setting it to very large values will - improve performance. + This setting limits the maximum age of the running transaction to + 'nrsec' seconds. The default value is 5 seconds. This means that if + you lose your power, you will lose as much as the latest 5 seconds of + metadata changes (your filesystem will not be damaged though, thanks + to the journaling). This default value (or any low value) will hurt + performance, but it's good for data-safety. Setting it to 0 will have + the same effect as leaving it at the default (5 seconds). Setting it + to very large values will improve performance. Note that due to + delayed allocation even older data can be lost on power failure since + writeback of those data begins only after time set in + /proc/sys/vm/dirty_expire_centisecs. barrier=<0|1(*)>, barrier(*), nobarrier This enables/disables the use of write barriers in the jbd code. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 5a92d89a1bd4..ade4e6ec23e0 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -113,7 +113,7 @@ the GPE dispatcher. This facility can be used to prevent such uncontrolled GPE floodings. - Format: <int> + Format: <byte> acpi_no_auto_serialize [HW,ACPI] Disable auto-serialization of AML methods diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst index fb5b39f73059..ad911be5b5e9 100644 --- a/Documentation/admin-guide/xfs.rst +++ b/Documentation/admin-guide/xfs.rst @@ -253,7 +253,7 @@ The following sysctls are available for the XFS filesystem: pool. fs.xfs.speculative_prealloc_lifetime - (Units: seconds Min: 1 Default: 300 Max: 86400) + (Units: seconds Min: 1 Default: 300 Max: 86400) The interval at which the background scanning for inodes with unused speculative preallocation runs. The scan removes unused preallocation from clean inodes and releases diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst index c9a44c98e868..1adf53dfc494 100644 --- a/Documentation/arm/microchip.rst +++ b/Documentation/arm/microchip.rst @@ -103,7 +103,7 @@ the Microchip website: http://www.microchip.com. * Datasheet - http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet_B.pdf * ARM Cortex-A5 + NEON based SoCs - sama5d4 family @@ -167,7 +167,7 @@ the Microchip website: http://www.microchip.com. * Datasheet - http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-E70-S70-V70-V71-Family-Data-Sheet-DS60001527D.pdf Linux kernel information diff --git a/Documentation/core-api/genalloc.rst b/Documentation/core-api/genalloc.rst index 098a46f55798..a5af2cbf58a5 100644 --- a/Documentation/core-api/genalloc.rst +++ b/Documentation/core-api/genalloc.rst @@ -129,7 +129,7 @@ writing of special-purpose memory allocators in the future. :functions: gen_pool_for_each_chunk .. kernel-doc:: lib/genalloc.c - :functions: addr_in_gen_pool + :functions: gen_pool_has_addr .. kernel-doc:: lib/genalloc.c :functions: gen_pool_avail diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index f77de49b1d51..4ac53a1363f6 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -57,7 +57,13 @@ The Linux kernel provides more basic utility functions. Bit Operations -------------- -.. kernel-doc:: include/asm-generic/bitops-instrumented.h +.. kernel-doc:: include/asm-generic/bitops/instrumented-atomic.h + :internal: + +.. kernel-doc:: include/asm-generic/bitops/instrumented-non-atomic.h + :internal: + +.. kernel-doc:: include/asm-generic/bitops/instrumented-lock.h :internal: Bitmap Operations diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst index 42b612677799..36890b026e77 100644 --- a/Documentation/dev-tools/kcov.rst +++ b/Documentation/dev-tools/kcov.rst @@ -34,6 +34,7 @@ Profiling data will only become accessible once debugfs has been mounted:: Coverage collection ------------------- + The following program demonstrates coverage collection from within a test program using kcov: @@ -128,6 +129,7 @@ only need to enable coverage (disable happens automatically on thread end). Comparison operands collection ------------------------------ + Comparison operands collection is similar to coverage collection: .. code-block:: c @@ -202,3 +204,130 @@ Comparison operands collection is similar to coverage collection: Note that the kcov modes (coverage collection or comparison operands) are mutually exclusive. + +Remote coverage collection +-------------------------- + +With KCOV_ENABLE coverage is collected only for syscalls that are issued +from the current process. With KCOV_REMOTE_ENABLE it's possible to collect +coverage for arbitrary parts of the kernel code, provided that those parts +are annotated with kcov_remote_start()/kcov_remote_stop(). + +This allows to collect coverage from two types of kernel background +threads: the global ones, that are spawned during kernel boot in a limited +number of instances (e.g. one USB hub_event() worker thread is spawned per +USB HCD); and the local ones, that are spawned when a user interacts with +some kernel interface (e.g. vhost workers). + +To enable collecting coverage from a global background thread, a unique +global handle must be assigned and passed to the corresponding +kcov_remote_start() call. Then a userspace process can pass a list of such +handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the +kcov_remote_arg struct. This will attach the used kcov device to the code +sections, that are referenced by those handles. + +Since there might be many local background threads spawned from different +userspace processes, we can't use a single global handle per annotation. +Instead, the userspace process passes a non-zero handle through the +common_handle field of the kcov_remote_arg struct. This common handle gets +saved to the kcov_handle field in the current task_struct and needs to be +passed to the newly spawned threads via custom annotations. Those threads +should in turn be annotated with kcov_remote_start()/kcov_remote_stop(). + +Internally kcov stores handles as u64 integers. The top byte of a handle +is used to denote the id of a subsystem that this handle belongs to, and +the lower 4 bytes are used to denote the id of a thread instance within +that subsystem. A reserved value 0 is used as a subsystem id for common +handles as they don't belong to a particular subsystem. The bytes 4-7 are +currently reserved and must be zero. In the future the number of bytes +used for the subsystem or handle ids might be increased. + +When a particular userspace proccess collects coverage by via a common +handle, kcov will collect coverage for each code section that is annotated +to use the common handle obtained as kcov_handle from the current +task_struct. However non common handles allow to collect coverage +selectively from different subsystems. + +.. code-block:: c + + struct kcov_remote_arg { + unsigned trace_mode; + unsigned area_size; + unsigned num_handles; + uint64_t common_handle; + uint64_t handles[0]; + }; + + #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) + #define KCOV_DISABLE _IO('c', 101) + #define KCOV_REMOTE_ENABLE _IOW('c', 102, struct kcov_remote_arg) + + #define COVER_SIZE (64 << 10) + + #define KCOV_TRACE_PC 0 + + #define KCOV_SUBSYSTEM_COMMON (0x00ull << 56) + #define KCOV_SUBSYSTEM_USB (0x01ull << 56) + + #define KCOV_SUBSYSTEM_MASK (0xffull << 56) + #define KCOV_INSTANCE_MASK (0xffffffffull) + + static inline __u64 kcov_remote_handle(__u64 subsys, __u64 inst) + { + if (subsys & ~KCOV_SUBSYSTEM_MASK || inst & ~KCOV_INSTANCE_MASK) + return 0; + return subsys | inst; + } + + #define KCOV_COMMON_ID 0x42 + #define KCOV_USB_BUS_NUM 1 + + int main(int argc, char **argv) + { + int fd; + unsigned long *cover, n, i; + struct kcov_remote_arg *arg; + + fd = open("/sys/kernel/debug/kcov", O_RDWR); + if (fd == -1) + perror("open"), exit(1); + if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE)) + perror("ioctl"), exit(1); + cover = (unsigned long*)mmap(NULL, COVER_SIZE * sizeof(unsigned long), + PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if ((void*)cover == MAP_FAILED) + perror("mmap"), exit(1); + + /* Enable coverage collection via common handle and from USB bus #1. */ + arg = calloc(1, sizeof(*arg) + sizeof(uint64_t)); + if (!arg) + perror("calloc"), exit(1); + arg->trace_mode = KCOV_TRACE_PC; + arg->area_size = COVER_SIZE; + arg->num_handles = 1; + arg->common_handle = kcov_remote_handle(KCOV_SUBSYSTEM_COMMON, + KCOV_COMMON_ID); + arg->handles[0] = kcov_remote_handle(KCOV_SUBSYSTEM_USB, + KCOV_USB_BUS_NUM); + if (ioctl(fd, KCOV_REMOTE_ENABLE, arg)) + perror("ioctl"), free(arg), exit(1); + free(arg); + + /* + * Here the user needs to trigger execution of a kernel code section + * that is either annotated with the common handle, or to trigger some + * activity on USB bus #1. + */ + sleep(2); + + n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED); + for (i = 0; i < n; i++) + printf("0x%lx\n", cover[i + 1]); + if (ioctl(fd, KCOV_DISABLE, 0)) + perror("ioctl"), exit(1); + if (munmap(cover, COVER_SIZE * sizeof(unsigned long))) + perror("munmap"), exit(1); + if (close(fd)) + perror("close"), exit(1); + return 0; + } diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index ecdfdc9d4b03..61ae13c44f91 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -203,12 +203,12 @@ Test Module Kselftest tests the kernel from userspace. Sometimes things need testing from within the kernel, one method of doing this is to create a test module. We can tie the module into the kselftest framework by -using a shell script test runner. ``kselftest_module.sh`` is designed +using a shell script test runner. ``kselftest/module.sh`` is designed to facilitate this process. There is also a header file provided to assist writing kernel modules that are for use with kselftest: - ``tools/testing/kselftest/kselftest_module.h`` -- ``tools/testing/kselftest/kselftest_module.sh`` +- ``tools/testing/kselftest/kselftest/module.sh`` How to use ---------- @@ -247,7 +247,7 @@ A bare bones test module might look like this: #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include "../tools/testing/selftests/kselftest_module.h" + #include "../tools/testing/selftests/kselftest/module.h" KSTM_MODULE_GLOBALS(); @@ -276,7 +276,7 @@ Example test script #!/bin/bash # SPDX-License-Identifier: GPL-2.0+ - $(dirname $0)/../kselftest_module.sh "foo" test_foo + $(dirname $0)/../kselftest/module.sh "foo" test_foo Test Harness diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst index 26ffb46bdf99..c60d760a0eed 100644 --- a/Documentation/dev-tools/kunit/index.rst +++ b/Documentation/dev-tools/kunit/index.rst @@ -9,6 +9,7 @@ KUnit - Unit Testing for the Linux Kernel start usage + kunit-tool api/index faq diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst new file mode 100644 index 000000000000..50d46394e97e --- /dev/null +++ b/Documentation/dev-tools/kunit/kunit-tool.rst @@ -0,0 +1,57 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +kunit_tool How-To +================= + +What is kunit_tool? +=================== + +kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building +the Linux kernel as UML (`User Mode Linux +<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing +the test results and displaying them in a user friendly manner. + +What is a kunitconfig? +====================== + +It's just a defconfig that kunit_tool looks for in the base directory. +kunit_tool uses it to generate a .config as you might expect. In addition, it +verifies that the generated .config contains the CONFIG options in the +kunitconfig; the reason it does this is so that it is easy to be sure that a +CONFIG that enables a test actually ends up in the .config. + +How do I use kunit_tool? +======================== + +If a kunitconfig is present at the root directory, all you have to do is: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run + +However, you most likely want to use it with the following options: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` + +- ``--timeout`` sets a maximum amount of time to allow tests to run. +- ``--jobs`` sets the number of threads to use to build the kernel. + +If you just want to use the defconfig that ships with the kernel, you can +append the ``--defconfig`` flag as well: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` --defconfig + +.. note:: + This command is particularly helpful for getting started because it + just works. No kunitconfig needs to be present. + +For a list of all the flags supported by kunit_tool, you can run: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --help diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst index aeeddfafeea2..9d6db892c41c 100644 --- a/Documentation/dev-tools/kunit/start.rst +++ b/Documentation/dev-tools/kunit/start.rst @@ -19,11 +19,14 @@ The wrapper can be run with: .. code-block:: bash - ./tools/testing/kunit/kunit.py run + ./tools/testing/kunit/kunit.py run --defconfig + +For more information on this wrapper (also called kunit_tool) checkout the +:doc:`kunit-tool` page. Creating a kunitconfig ====================== -The Python script is a thin wrapper around Kbuild as such, it needs to be +The Python script is a thin wrapper around Kbuild. As such, it needs to be configured with a ``kunitconfig`` file. This file essentially contains the regular Kernel config, with the specific test targets as well. @@ -59,8 +62,8 @@ If everything worked correctly, you should see the following: followed by a list of tests that are run. All of them should be passing. .. note:: - Because it is building a lot of sources for the first time, the ``Building - kunit kernel`` step may take a while. + Because it is building a lot of sources for the first time, the + ``Building KUnit kernel`` step may take a while. Writing your first test ======================= @@ -159,7 +162,7 @@ Now you can run the test: .. code-block:: bash - ./tools/testing/kunit/kunit.py + ./tools/testing/kunit/kunit.py run You should see the following failure: diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index c6e69634e274..b9a065ab681e 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -16,7 +16,7 @@ Organization of this document ============================= This document is organized into two main sections: Testing and Isolating -Behavior. The first covers what a unit test is and how to use KUnit to write +Behavior. The first covers what unit tests are and how to use KUnit to write them. The second covers how to use KUnit to isolate code and make it possible to unit test code that was otherwise un-unit-testable. @@ -174,13 +174,13 @@ Test Suites ~~~~~~~~~~~ Now obviously one unit test isn't very helpful; the power comes from having -many test cases covering all of your behaviors. Consequently it is common to -have many *similar* tests; in order to reduce duplication in these closely -related tests most unit testing frameworks provide the concept of a *test -suite*, in KUnit we call it a *test suite*; all it is is just a collection of -test cases for a unit of code with a set up function that gets invoked before -every test cases and then a tear down function that gets invoked after every -test case completes. +many test cases covering all of a unit's behaviors. Consequently it is common +to have many *similar* tests; in order to reduce duplication in these closely +related tests most unit testing frameworks - including KUnit - provide the +concept of a *test suite*. A *test suite* is just a collection of test cases +for a unit of code with a set up function that gets invoked before every test +case and then a tear down function that gets invoked after every test case +completes. Example: @@ -211,7 +211,7 @@ KUnit test framework. .. note:: A test case will only be run if it is associated with a test suite. -For a more information on these types of things see the :doc:`api/test`. +For more information on these types of things see the :doc:`api/test`. Isolating Behavior ================== @@ -338,7 +338,7 @@ We can easily test this code by *faking out* the underlying EEPROM: return count; } - ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count) + ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count) { struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent); @@ -454,7 +454,7 @@ KUnit on non-UML architectures By default KUnit uses UML as a way to provide dependencies for code under test. Under most circumstances KUnit's usage of UML should be treated as an implementation detail of how KUnit works under the hood. Nevertheless, there -are instances where being able to run architecture specific code, or test +are instances where being able to run architecture specific code or test against real hardware is desirable. For these reasons KUnit supports running on other architectures. @@ -557,7 +557,7 @@ run your tests on your hardware setup just by compiling for your architecture. .. important:: Always prefer tests that run on UML to tests that only run under a particular architecture, and always prefer tests that run under QEMU or another easy - (and monitarily free) to obtain software environment to a specific piece of + (and monetarily free) to obtain software environment to a specific piece of hardware. Nevertheless, there are still valid reasons to write an architecture or hardware diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 99015cef8bb1..c6a443352ef8 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -94,7 +94,7 @@ properties: - amlogic,p212 - hwacom,amazetv - khadas,vim - - libretech,cc + - libretech,aml-s905x-cc - nexbox,a95x - const: amlogic,s905x - const: amlogic,meson-gxl @@ -147,6 +147,7 @@ properties: - enum: - hardkernel,odroid-n2 - khadas,vim3 + - ugoos,am6 - const: amlogic,s922x - const: amlogic,g12b @@ -156,4 +157,10 @@ properties: - seirobotics,sei610 - khadas,vim3l - const: amlogic,sm1 + + - description: Boards with the Amlogic Meson A1 A113L SoC + items: + - enum: + - amlogic,ad401 + - const: amlogic,a1 ... diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index 6e168abcd4d1..6dd8be401673 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -45,6 +45,13 @@ properties: - const: atmel,at91sam9x5 - const: atmel,at91sam9 + - description: Overkiz kizbox3 board + items: + - const: overkiz,kizbox3-hs + - const: atmel,sama5d27 + - const: atmel,sama5d2 + - const: atmel,sama5 + - items: - const: atmel,sama5d27 - const: atmel,sama5d2 @@ -73,6 +80,13 @@ properties: - const: atmel,sama5d3 - const: atmel,sama5 + - description: Overkiz kizbox2 board with two heads + items: + - const: overkiz,kizbox2-2 + - const: atmel,sama5d31 + - const: atmel,sama5d3 + - const: atmel,sama5 + - items: - enum: - atmel,sama5d31 diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml new file mode 100644 index 000000000000..dd52e29b0642 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings + +maintainers: + - Eric Anholt <eric@anholt.net> + - Stefan Wahren <wahrenst@gmx.net> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM2711 based Boards + items: + - enum: + - raspberrypi,4-model-b + - const: brcm,bcm2711 + + - description: BCM2835 based Boards + items: + - enum: + - raspberrypi,model-a + - raspberrypi,model-a-plus + - raspberrypi,model-b + - raspberrypi,model-b-i2c0 # Raspberry Pi Model B (no P5) + - raspberrypi,model-b-rev2 + - raspberrypi,model-b-plus + - raspberrypi,compute-module + - raspberrypi,model-zero + - raspberrypi,model-zero-w + - const: brcm,bcm2835 + + - description: BCM2836 based Boards + items: + - enum: + - raspberrypi,2-model-b + - const: brcm,bcm2836 + + - description: BCM2837 based Boards + items: + - enum: + - raspberrypi,3-model-a-plus + - raspberrypi,3-model-b + - raspberrypi,3-model-b-plus + - raspberrypi,3-compute-module + - raspberrypi,3-compute-module-lite + - const: brcm,bcm2837 + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt deleted file mode 100644 index 245328f36580..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ /dev/null @@ -1,67 +0,0 @@ -Broadcom BCM2835 device tree bindings -------------------------------------------- - -Raspberry Pi Model A -Required root node properties: -compatible = "raspberrypi,model-a", "brcm,bcm2835"; - -Raspberry Pi Model A+ -Required root node properties: -compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; - -Raspberry Pi Model B -Required root node properties: -compatible = "raspberrypi,model-b", "brcm,bcm2835"; - -Raspberry Pi Model B (no P5) -early model B with I2C0 rather than I2C1 routed to the expansion header -Required root node properties: -compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835"; - -Raspberry Pi Model B rev2 -Required root node properties: -compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; - -Raspberry Pi Model B+ -Required root node properties: -compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; - -Raspberry Pi 2 Model B -Required root node properties: -compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; - -Raspberry Pi 3 Model A+ -Required root node properties: -compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; - -Raspberry Pi 3 Model B -Required root node properties: -compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; - -Raspberry Pi 3 Model B+ -Required root node properties: -compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; - -Raspberry Pi Compute Module -Required root node properties: -compatible = "raspberrypi,compute-module", "brcm,bcm2835"; - -Raspberry Pi Compute Module 3 -Required root node properties: -compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; - -Raspberry Pi Compute Module 3 Lite -Required root node properties: -compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837"; - -Raspberry Pi Zero -Required root node properties: -compatible = "raspberrypi,model-zero", "brcm,bcm2835"; - -Raspberry Pi Zero W -Required root node properties: -compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; - -Generic BCM2835 board -Required root node properties: -compatible = "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index cb30895e3b67..c23c24ff7575 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -189,6 +189,7 @@ properties: - marvell,armada-390-smp - marvell,armada-xp-smp - marvell,98dx3236-smp + - marvell,mmp3-smp - mediatek,mt6589-smp - mediatek,mt81xx-tz-smp - qcom,gcc-msm8660 diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 1b4b4e6573b5..f79683a628f0 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -38,12 +38,16 @@ properties: - description: i.MX27 Product Development Kit items: - enum: + - armadeus,imx27-apf27 # APF27 SoM + - armadeus,imx27-apf27dev # APF27 SoM on APF27Dev board - fsl,imx27-pdk - const: fsl,imx27 - description: i.MX28 based Boards items: - enum: + - armadeus,imx28-apf28 # APF28 SoM + - armadeus,imx28-apf28dev # APF28 SoM on APF28Dev board - fsl,imx28-evk - i2se,duckbill - i2se,duckbill-2 @@ -87,7 +91,8 @@ properties: - description: i.MX51 Babbage Board items: - enum: - - armadeus,imx51-apf51 + - armadeus,imx51-apf51 # APF51 SoM + - armadeus,imx51-apf51dev # APF51 SoM on APF51Dev board - fsl,imx51-babbage - technologic,imx51-ts4800 - const: fsl,imx51 @@ -106,6 +111,8 @@ properties: - description: i.MX6Q based Boards items: - enum: + - armadeus,imx6q-apf6 # APF6 (Quad/Dual) SoM + - armadeus,imx6q-apf6dev # APF6 (Quad/Dual) SoM on APF6Dev board - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base - fsl,imx6q-arm2 @@ -114,6 +121,11 @@ properties: - fsl,imx6q-sabresd - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 + - toradex,apalis_imx6q # Apalis iMX6 Module + - toradex,apalis_imx6q-eval # Apalis iMX6 Module on Apalis Evaluation Board + - toradex,apalis_imx6q-ixora # Apalis iMX6 Module on Ixora + - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6 Module on Ixora V1.1 + - variscite,dt6customboard - const: fsl,imx6q - description: i.MX6QP based Boards @@ -126,6 +138,8 @@ properties: - description: i.MX6DL based Boards items: - enum: + - armadeus,imx6dl-apf6 # APF6 (Solo) SoM + - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board - eckelmann,imx6dl-ci4x10 - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base @@ -133,6 +147,8 @@ properties: - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 + - toradex,colibri_imx6dl # Colibri iMX6 Module + - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6 Module on Colibri Evaluation Board V3 - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board @@ -148,6 +164,7 @@ properties: items: - enum: - fsl,imx6sll-evk + - kobo,clarahd - const: fsl,imx6sll - description: i.MX6SX based Boards @@ -160,8 +177,11 @@ properties: - description: i.MX6UL based Boards items: - enum: + - armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM + - armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board - kontron,imx6ul-n6310-som # Kontron N6310 SOM + - kontron,imx6ul-n6311-som # Kontron N6311 SOM - const: fsl,imx6ul - description: Kontron N6310 S Board @@ -170,6 +190,12 @@ properties: - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul + - description: Kontron N6311 S Board + items: + - const: kontron,imx6ul-n6311-s + - const: kontron,imx6ul-n6311-som + - const: fsl,imx6ul + - description: Kontron N6310 S 43 Board items: - const: kontron,imx6ul-n6310-s-43 @@ -180,7 +206,18 @@ properties: - description: i.MX6ULL based Boards items: - enum: + - armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM + - armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board + - kontron,imx6ull-n6411-som # Kontron N6411 SOM + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / Bluetooth Module on Colibri Evaluation Board + - const: fsl,imx6ull + + - description: Kontron N6411 S Board + items: + - const: kontron,imx6ull-n6411-s + - const: kontron,imx6ull-n6411-som - const: fsl,imx6ull - description: i.MX6ULZ based Boards @@ -193,6 +230,8 @@ properties: - description: i.MX7S based Boards items: - enum: + - toradex,colibri-imx7s # Colibri iMX7 Solo Module + - toradex,colibri-imx7s-eval-v3 # Colibri iMX7 Solo Module on Colibri Evaluation Board V3 - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM - const: fsl,imx7s @@ -201,6 +240,10 @@ properties: - enum: - fsl,imx7d-sdb # i.MX7 SabreSD Board - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board + - toradex,colibri-imx7d # Colibri iMX7 Dual Module + - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module + - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on Colibri Evaluation Board V3 - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board @@ -233,6 +276,7 @@ properties: items: - enum: - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board + - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - const: fsl,imx8mn - description: i.MX8MQ based Boards @@ -250,6 +294,8 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board + - toradex,colibri-imx8x # Colibri iMX8X Module + - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3 - const: fsl,imx8qxp - description: @@ -267,6 +313,10 @@ properties: - fsl,vf600 - fsl,vf610 - fsl,vf610m4 + - toradex,vf500-colibri_vf50 # Colibri VF50 Module + - toradex,vf500-colibri_vf50-on-eval # Colibri VF50 Module on Colibri Evaluation Board + - toradex,vf610-colibri_vf61 # Colibri VF61 Module + - toradex,vf610-colibri_vf61-on-eval # Colibri VF61 Module on Colibri Evaluation Board - description: ZII's VF610 based Boards items: @@ -335,4 +385,10 @@ properties: - fsl,ls2088a-rdb - const: fsl,ls2088a + - description: S32V234 based Boards + items: + - enum: + - fsl,s32v234-evb # S32V234-EVB2 Customer Evaluation Board + - const: fsl,s32v234 + ... diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt index 26410fbb85be..098d932fc963 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt @@ -1,15 +1,15 @@ -Marvell Armada AP806 System Controller +Marvell Armada AP80x System Controller ====================================== -The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K -SoCs. It contains system controllers, which provide several registers -giving access to numerous features: clocks, pin-muxing and many other -SoC configuration items. This DT binding allows to describe these -system controllers. +The AP806/AP807 is one of the two core HW blocks of the Marvell Armada +7K/8K/931x SoCs. It contains system controllers, which provide several +registers giving access to numerous features: clocks, pin-muxing and +many other SoC configuration items. This DT binding allows to describe +these system controllers. For the top level node: - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the AP806 system controller + - reg: register area of the AP80x system controller SYSTEM CONTROLLER 0 =================== diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt deleted file mode 100644 index df98a9c82a8c..000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt +++ /dev/null @@ -1,24 +0,0 @@ -Marvell Armada 7K/8K Platforms Device Tree Bindings ---------------------------------------------------- - -Boards using a SoC of the Marvell Armada 7K or 8K families must carry -the following root node property: - - - compatible, with one of the following values: - - - "marvell,armada7020", "marvell,armada-ap806-dual", "marvell,armada-ap806" - when the SoC being used is the Armada 7020 - - - "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806" - when the SoC being used is the Armada 7040 - - - "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806" - when the SoC being used is the Armada 8020 - - - "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806" - when the SoC being used is the Armada 8040 - -Example: - -compatible = "marvell,armada7040-db", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml new file mode 100644 index 000000000000..a9828c50c0fb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR X11) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 7K/8K Platforms Device Tree Bindings + +maintainers: + - Gregory CLEMENT <gregory.clement@bootlin.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: Armada 7020 SoC + items: + - const: marvell,armada7020 + - const: marvell,armada-ap806-dual + - const: marvell,armada-ap806 + + - description: Armada 7040 SoC + items: + - const: marvell,armada7040 + - const: marvell,armada-ap806-quad + - const: marvell,armada-ap806 + + - description: Armada 8020 SoC + items: + - const: marvell,armada8020 + - const: marvell,armada-ap806-dual + - const: marvell,armada-ap806 + + - description: Armada 8040 SoC + items: + - const: marvell,armada8040 + - const: marvell,armada-ap806-quad + - const: marvell,armada-ap806 + + - description: Armada CN9130 SoC with no external CP + items: + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: Armada CN9131 SoC with one external CP + items: + - const: marvell,cn9131 + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: Armada CN9132 SoC with two external CPs + items: + - const: marvell,cn9132 + - const: marvell,cn9131 + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt deleted file mode 100644 index 951687528efb..000000000000 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt +++ /dev/null @@ -1,14 +0,0 @@ -Marvell Platforms Device Tree Bindings ----------------------------------------------------- - -PXA168 Aspenite Board -Required root node properties: - - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168"; - -PXA910 DKB Board -Required root node properties: - - compatible = "mrvl,pxa910-dkb"; - -MMP2 Brownstone Board -Required root node properties: - - compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml new file mode 100644 index 000000000000..818dfe6de512 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mrvl/mrvl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Platforms Device Tree Bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: PXA168 Aspenite Board + items: + - enum: + - mrvl,pxa168-aspenite + - const: mrvl,pxa168 + - description: PXA910 DKB Board + items: + - enum: + - mrvl,pxa910-dkb + - const: mrvl,pxa910 + - description: MMP2 based boards + items: + - enum: + - mrvl,mmp2-brownstone + - const: mrvl,mmp2 + - description: MMP3 based boards + items: + - const: mrvl,mmp3 +... diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt deleted file mode 100644 index eaee06b2d8f2..000000000000 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt +++ /dev/null @@ -1,41 +0,0 @@ -== Introduction== - -LLCC (Last Level Cache Controller) provides last level of cache memory in SOC, -that can be shared by multiple clients. Clients here are different cores in the -SOC, the idea is to minimize the local caches at the clients and migrate to -common pool of memory. Cache memory is divided into partitions called slices -which are assigned to clients. Clients can query the slice details, activate -and deactivate them. - -Properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-llcc" - -- reg: - Usage: required - Value Type: <prop-encoded-array> - Definition: The first element specifies the llcc base start address and - the size of the register region. The second element specifies - the llcc broadcast base address and size of the register region. - -- reg-names: - Usage: required - Value Type: <stringlist> - Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base". - -- interrupts: - Usage: required - Definition: The interrupt is associated with the llcc edac device. - It's used for llcc cache single and double bit error detection - and reporting. - -Example: - - cache-controller@1100000 { - compatible = "qcom,sdm845-llcc"; - reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml new file mode 100644 index 000000000000..558749065b97 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Last Level Cache Controller + +maintainers: + - Rishabh Bhatnagar <rishabhb@codeaurora.org> + - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + +description: | + LLCC (Last Level Cache Controller) provides last level of cache memory in SoC, + that can be shared by multiple clients. Clients here are different cores in the + SoC, the idea is to minimize the local caches at the clients and migrate to + common pool of memory. Cache memory is divided into partitions called slices + which are assigned to clients. Clients can query the slice details, activate + and deactivate them. + +properties: + compatible: + enum: + - qcom,sc7180-llcc + - qcom,sdm845-llcc + + reg: + items: + - description: LLCC base register region + - description: LLCC broadcast base register region + + reg-names: + items: + - const: llcc_base + - const: llcc_broadcast_base + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt new file mode 100644 index 000000000000..fcd3456afbbe --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt @@ -0,0 +1,29 @@ +OMAP PRM instance bindings + +Power and Reset Manager is an IP block on OMAP family of devices which +handle the power domains and their current state, and provide reset +handling for the domains and/or separate IP blocks under the power domain +hierarchy. + +Required properties: +- compatible: Must contain one of the following: + "ti,am3-prm-inst" + "ti,am4-prm-inst" + "ti,omap4-prm-inst" + "ti,omap5-prm-inst" + "ti,dra7-prm-inst" + and additionally must contain: + "ti,omap-prm-inst" +- reg: Contains PRM instance register address range + (base address and length) + +Optional properties: +- #reset-cells: Should be 1 if the PRM instance in question supports resets. + +Example: + +prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml index 3528b61963b4..ab59de17152d 100644 --- a/Documentation/devicetree/bindings/arm/realtek.yaml +++ b/Documentation/devicetree/bindings/arm/realtek.yaml @@ -13,11 +13,24 @@ properties: $nodename: const: '/' compatible: - # RTD1295 SoC based boards - items: - - enum: - - mele,v9 - - probox2,ava - - zidoo,x9s - - const: realtek,rtd1295 + oneOf: + # RTD1293 SoC based boards + - items: + - enum: + - synology,ds418j # Synology DiskStation DS418j + - const: realtek,rtd1293 + + # RTD1295 SoC based boards + - items: + - enum: + - mele,v9 # MeLE V9 + - probox2,ava # ProBox2 AVA + - zidoo,x9s # Zidoo X9S + - const: realtek,rtd1295 + + # RTD1296 SoC based boards + - items: + - enum: + - synology,ds418 # Synology DiskStation DS418 + - const: realtek,rtd1296 ... diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.txt b/Documentation/devicetree/bindings/arm/renesas,prr.txt deleted file mode 100644 index 08e482e953ca..000000000000 --- a/Documentation/devicetree/bindings/arm/renesas,prr.txt +++ /dev/null @@ -1,20 +0,0 @@ -Renesas Product Register - -Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that -allows to retrieve SoC product and revision information. If present, a device -node for this register should be added. - -Required properties: - - compatible: Must be one of: - "renesas,prr" - "renesas,bsid" - - reg: Base address and length of the register block. - - -Examples --------- - - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml new file mode 100644 index 000000000000..7f8d17f33983 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/renesas,prr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Product Register + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + Most Renesas ARM SoCs have a Product Register or Boundary Scan ID + Register that allows to retrieve SoC product and revision information. + If present, a device node for this register should be added. + +properties: + compatible: + enum: + - renesas,prr + - renesas,bsid + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 28eb458f761a..9436124c5809 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -116,6 +116,18 @@ properties: - const: hoperun,hihope-rzg2m - const: renesas,r8a774a1 + - description: RZ/G2N (R8A774B1) + items: + - enum: + - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform + - const: renesas,r8a774b1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2n + - const: renesas,r8a774b1 + - description: RZ/G2E (R8A774C0) items: - enum: @@ -193,15 +205,23 @@ properties: - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) - const: renesas,r8a7796 + - description: R-Car M3-W+ (R8A77961) + items: + - enum: + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A) + - const: renesas,r8a77961 + - description: Kingfisher (SBEV-RCAR-KF-M03) items: - const: shimafuji,kingfisher - enum: - renesas,h3ulcb - renesas,m3ulcb + - renesas,m3nulcb - enum: - renesas,r8a7795 - renesas,r8a7796 + - renesas,r8a77965 - description: R-Car M3-N (R8A77965) items: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 9c7e70335ac0..d9847b306b83 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -40,6 +40,11 @@ properties: - const: asus,rk3288-tinker-s - const: rockchip,rk3288 + - description: Beelink A1 + items: + - const: azw,beelink-a1 + - const: rockchip,rk3328 + - description: bq Curie 2 tablet items: - const: mundoreader,bq-curie2 @@ -82,6 +87,11 @@ properties: - const: firefly,firefly-rk3399 - const: rockchip,rk3399 + - description: Firefly ROC-RK3308-CC + items: + - const: firefly,roc-rk3308-cc + - const: rockchip,rk3308 + - description: Firefly roc-rk3328-cc items: - const: firefly,roc-rk3328-cc @@ -89,7 +99,9 @@ properties: - description: Firefly ROC-RK3399-PC items: - - const: firefly,roc-rk3399-pc + - enum: + - firefly,roc-rk3399-pc + - firefly,roc-rk3399-pc-mezzanine - const: rockchip,rk3399 - description: FriendlyElec NanoPi4 series boards @@ -464,6 +476,11 @@ properties: - rockchip,rk3288-evb-rk808 - const: rockchip,rk3288 + - description: Rockchip RK3308 Evaluation board + items: + - const: rockchip,rk3308-evb + - const: rockchip,rk3308 + - description: Rockchip RK3328 Evaluation board items: - const: rockchip,rk3328-evb diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 972b1e9ee804..cffe8bb0bad1 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -8,7 +8,7 @@ title: Allwinner platforms device tree bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: $nodename: @@ -211,6 +211,11 @@ properties: - const: friendlyarm,nanopi-a64 - const: allwinner,sun50i-a64 + - description: FriendlyARM NanoPi Duo2 + items: + - const: friendlyarm,nanopi-duo2 + - const: allwinner,sun8i-h3 + - description: FriendlyARM NanoPi M1 items: - const: friendlyarm,nanopi-m1 diff --git a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt index 1464a4713553..2005bb486705 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt +++ b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt @@ -8,6 +8,7 @@ bus. Required properties: - compatible: Must be one of: - allwinner,sun5i-a13-mbus + - allwinner,sun8i-h3-mbus - reg: Offset and length of the register set for the controller - clocks: phandle to the clock driving the controller - dma-ranges: See section 2.3.9 of the DeviceTree Specification diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index d2a872286437..f0b3d30fbb76 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -8,7 +8,7 @@ title: Allwinner A64 Display Engine Bus Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: $nodename: diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index be32f087c529..9fe11ceecdba 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -8,7 +8,7 @@ title: Allwinner A23 RSB Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index 64938fdaea55..4d382128b711 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -8,7 +8,7 @@ title: Allwinner Clock Control Unit Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#clock-cells": diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt index 39f0c1ac84ee..55e78cddec8c 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt @@ -10,6 +10,11 @@ Required Properties: - compatible: CRU should be "rockchip,px30-cru" - reg: physical base address of the controller and length of memory mapped region. +- clocks: A list of phandle + clock-specifier pairs for the clocks listed + in clock-names +- clock-names: Should contain the following: + - "xin24m" for both PMUCRU and CRU + - "gpll" for CRU (sourced from PMUCRU) - #clock-cells: should be 1. - #reset-cells: should be 1. diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml index 80b3e7350a73..33c7842917f6 100644 --- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Security System Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml new file mode 100644 index 000000000000..2c459b8c76ff --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/allwinner,sun8i-ce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Crypto Engine driver + +maintainers: + - Corentin Labbe <clabbe.montjoie@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun8i-h3-crypto + - allwinner,sun8i-r40-crypto + - allwinner,sun50i-a64-crypto + - allwinner,sun50i-h5-crypto + - allwinner,sun50i-h6-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus clock + - description: Module clock + - description: MBus clock + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: bus + - const: mod + - const: ram + minItems: 2 + maxItems: 3 + + resets: + maxItems: 1 + +if: + properties: + compatible: + items: + const: allwinner,sun50i-h6-crypto +then: + properties: + clocks: + minItems: 3 + clock-names: + minItems: 3 +else: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun50i-a64-ccu.h> + #include <dt-bindings/reset/sun50i-a64-ccu.h> + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt index 9ceb19e0c7fd..9ceb19e0c7fd 100644 --- a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt +++ b/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/ddr/lpddr2.txt index 58354a075e13..ddd40121e6f6 100644 --- a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt +++ b/Documentation/devicetree/bindings/ddr/lpddr2.txt @@ -36,7 +36,7 @@ Child nodes: "lpddr2-timings" provides AC timing parameters of the device for a given speed-bin. The user may provide the timings for as many speed-bins as is required. Please see Documentation/devicetree/ - bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" + bindings/ddr/lpddr2-timings.txt for more information on "lpddr2-timings" Example: diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt new file mode 100644 index 000000000000..84705e50a3fd --- /dev/null +++ b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt @@ -0,0 +1,58 @@ +* AC timing parameters of LPDDR3 memories for a given speed-bin. + +The structures are based on LPDDR2 and extended where needed. + +Required properties: +- compatible : Should be "jedec,lpddr3-timings" +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32> +- reg : maximum DDR clock frequency for the speed-bin. Type is <u32> + +Optional properties: + +The following properties represent AC timing parameters from the memory +data-sheet of the device for a given speed-bin. All these properties are +of type <u32> and the default unit is ps (pico seconds). +- tRFC +- tRRD +- tRPab +- tRPpb +- tRCD +- tRC +- tRAS +- tWTR +- tWR +- tRTP +- tW2W-C2C +- tR2R-C2C +- tFAW +- tXSR +- tXP +- tCKE +- tCKESR +- tMRD + +Example: + +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 { + compatible = "jedec,lpddr3-timings"; + reg = <800000000>; /* workaround: it shows max-freq */ + min-freq = <100000000>; + tRFC = <65000>; + tRRD = <6000>; + tRPab = <12000>; + tRPpb = <12000>; + tRCD = <10000>; + tRC = <33750>; + tRAS = <23000>; + tWTR = <3750>; + tWR = <7500>; + tRTP = <3750>; + tW2W-C2C = <0>; + tR2R-C2C = <0>; + tFAW = <25000>; + tXSR = <70000>; + tXP = <3750>; + tCKE = <3750>; + tCKESR = <3750>; + tMRD = <7000>; +}; diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt new file mode 100644 index 000000000000..a0eda35a86ee --- /dev/null +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt @@ -0,0 +1,101 @@ +* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C + +Required properties: +- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3". + Example "<vendor>,<type>" values: + "samsung,K3QF2F20DB" + +- density : <u32> representing density in Mb (Mega bits) +- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64 +- #address-cells: Must be set to 1 +- #size-cells: Must be set to 0 + +Optional properties: + +The following optional properties represent the minimum value of some AC +timing parameters of the DDR device in terms of number of clock cycles. +These values shall be obtained from the device data-sheet. +- tRFC-min-tck +- tRRD-min-tck +- tRPab-min-tck +- tRPpb-min-tck +- tRCD-min-tck +- tRC-min-tck +- tRAS-min-tck +- tWTR-min-tck +- tWR-min-tck +- tRTP-min-tck +- tW2W-C2C-min-tck +- tR2R-C2C-min-tck +- tWL-min-tck +- tDQSCK-min-tck +- tRL-min-tck +- tFAW-min-tck +- tXSR-min-tck +- tXP-min-tck +- tCKE-min-tck +- tCKESR-min-tck +- tMRD-min-tck + +Child nodes: +- The lpddr3 node may have one or more child nodes of type "lpddr3-timings". + "lpddr3-timings" provides AC timing parameters of the device for + a given speed-bin. Please see Documentation/devicetree/ + bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings" + +Example: + +samsung_K3QF2F20DB: lpddr3 { + compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; + density = <16384>; + io-width = <32>; + #address-cells = <1>; + #size-cells = <0>; + + tRFC-min-tck = <17>; + tRRD-min-tck = <2>; + tRPab-min-tck = <2>; + tRPpb-min-tck = <2>; + tRCD-min-tck = <3>; + tRC-min-tck = <6>; + tRAS-min-tck = <5>; + tWTR-min-tck = <2>; + tWR-min-tck = <7>; + tRTP-min-tck = <2>; + tW2W-C2C-min-tck = <0>; + tR2R-C2C-min-tck = <0>; + tWL-min-tck = <8>; + tDQSCK-min-tck = <5>; + tRL-min-tck = <14>; + tFAW-min-tck = <5>; + tXSR-min-tck = <12>; + tXP-min-tck = <2>; + tCKE-min-tck = <2>; + tCKESR-min-tck = <2>; + tMRD-min-tck = <5>; + + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 { + compatible = "jedec,lpddr3-timings"; + /* workaround: 'reg' shows max-freq */ + reg = <800000000>; + min-freq = <100000000>; + tRFC = <65000>; + tRRD = <6000>; + tRPab = <12000>; + tRPpb = <12000>; + tRCD = <10000>; + tRC = <33750>; + tRAS = <23000>; + tWTR = <3750>; + tWR = <7500>; + tRTP = <3750>; + tW2W-C2C = <0>; + tR2R-C2C = <0>; + tFAW = <25000>; + tXSR = <70000>; + tXP = <3750>; + tCKE = <3750>; + tCKESR = <3750>; + tMRD = <7000>; + }; +} diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index dafc0980c4fa..0f7074977c04 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml new file mode 100644 index 000000000000..6d72b3d11fbc --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX6345 eDP Transmitter Device Tree Bindings + +maintainers: + - Torsten Duwe <duwe@lst.de> + +description: | + The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for + portable devices. + +properties: + compatible: + const: analogix,anx6345 + + reg: + maxItems: 1 + description: base I2C address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to active low reset + + dvdd12-supply: + maxItems: 1 + description: Regulator for 1.2V digital core power. + + dvdd25-supply: + maxItems: 1 + description: Regulator for 2.5V digital core power. + + ports: + type: object + + properties: + port@0: + type: object + description: | + Video port for LVTTL input + + port@1: + type: object + description: | + Video port for eDP output (panel or connector). + May be omitted if EDID works reliably. + + required: + - port@0 + +required: + - compatible + - reg + - reset-gpios + - dvdd12-supply + - dvdd25-supply + - ports + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + anx6345_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + anx6345_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + + anx6345_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + anx6345_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt index 90af5b0a56a9..bf9c7a2a495c 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.txt +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt @@ -31,6 +31,10 @@ Required properties: - iommus: phandle to the adreno iommu - operating-points-v2: phandle to the OPP operating points +Optional properties: +- sram: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon + SoCs. See Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. + Example: / { @@ -63,3 +67,50 @@ Example: operating-points-v2 = <&gmu_opp_table>; }; }; + +a3xx example with OCMEM support: + +/ { + ... + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", + "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", + "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + ranges = <0 0 0xfec00000 0x100000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 4e11338548aa..43d11279c925 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -76,6 +76,8 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: * "lut" + * "tbu" + * "tbu_rt" Example: diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 0e7987f1cdb7..d67617f6f74a 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ronbo RB070D30 DSI Display Panel maintainers: - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml index 15abc0f9429f..83808199657b 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 DMA Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "dma-controller.yaml#" diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index 387d599522c7..9e53472be194 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -8,7 +8,7 @@ title: Allwinner A64 DMA Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "dma-controller.yaml#" diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml index 740b7f9b535b..c1676b96daac 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 DMA Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "dma-controller.yaml#" diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt index a4fe136be2ba..18c3aea90df2 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt @@ -11,7 +11,9 @@ power management service, FPGA service and other platform management services. Required properties: - - compatible: Must contain: "xlnx,zynqmp-firmware" + - compatible: Must contain any of below: + "xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC + "xlnx,versal-firmware" for Versal - method: The method of calling the PM-API firmware layer. Permitted values are: - "smc" : SMC #0, following the SMCCC @@ -21,6 +23,8 @@ Required properties: Example ------- +Zynq Ultrascale+ MPSoC +---------------------- firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; @@ -28,3 +32,13 @@ firmware { ... }; }; + +Versal +------ +firmware { + versal_firmware: versal-firmware { + compatible = "xlnx,versal-firmware"; + method = "smc"; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index c9bdf1074305..36f59b3ade71 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -33,6 +33,10 @@ properties: - const: arm,mali-t820 - items: - enum: + - arm,juno-mali + - const: arm,mali-t624 + - items: + - enum: - rockchip,rk3288-mali - samsung,exynos5433-mali - const: arm,mali-t760 @@ -41,7 +45,6 @@ properties: - rockchip,rk3399-mali - const: arm,mali-t860 - # "arm,mali-t624" # "arm,mali-t830" # "arm,mali-t880" diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml index 9346ef6ba61b..6097e8ac46c1 100644 --- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml +++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index b68be3aaf587..e1f6d64bdccd 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml# @@ -53,7 +53,8 @@ patternProperties: description: | The channel number. It can have up to 8 channels numbered from 0 to 7. items: - maximum: 7 + - minimum: 0 + maximum: 7 diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml index d74962c0f5ae..15c514b83583 100644 --- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml @@ -8,7 +8,7 @@ title: Allwinner A33 Thermal Sensor Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#io-channel-cells": diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index b3bd8ef7fbd6..5b3b71c9c018 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 LRADC Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml index 23a202d24e43..953d875b5e74 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Interrupt Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/interrupt-controller.yaml# diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index 8cd08cfb25be..cf09055da78b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -8,7 +8,7 @@ title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: /schemas/interrupt-controller.yaml# diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt index 608fee15a4cf..a0ed02725a9d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt @@ -1,13 +1,17 @@ * Marvell MMP Interrupt controller Required properties: -- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or - "mrvl,mmp2-mux-intc" +- compatible : Should be + "mrvl,mmp-intc" on Marvel MMP, + "mrvl,mmp2-intc" along with "mrvl,mmp2-mux-intc" on MMP2 or + "marvell,mmp3-intc" with "mrvl,mmp2-mux-intc" on MMP3 - reg : Address and length of the register set of the interrupt controller. If the interrupt controller is intc, address and length means the range - of the whole interrupt controller. If the interrupt controller is mux-intc, - address and length means one register. Since address of mux-intc is in the - range of intc. mux-intc is secondary interrupt controller. + of the whole interrupt controller. The "marvell,mmp3-intc" controller + also has a secondary range for the second CPU core. If the interrupt + controller is mux-intc, address and length means one register. Since + address of mux-intc is in the range of intc. mux-intc is secondary + interrupt controller. - reg-names : Name of the register set of the interrupt controller. It's only required in mux-intc interrupt controller. - interrupts : Should be the port interrupt shared by mux interrupts. It's diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml index d3e423fcb6c2..0f6374ceaa69 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> description: |- The Allwinner A10 and later has a CMOS Sensor Interface to retrieve diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml index dea36d68cdbe..7838804700d6 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Infrared Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "rc.yaml#" diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt new file mode 100644 index 000000000000..02e4a1f862f1 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt @@ -0,0 +1,84 @@ +* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device + +The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM +memory chips are connected. The driver is to monitor the controller in runtime +and switch frequency and voltage. To monitor the usage of the controller in +runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which +is able to measure the current load of the memory. +When 'userspace' governor is used for the driver, an application is able to +switch the DMC and memory frequency. + +Required properties for DMC device for Exynos5422: +- compatible: Should be "samsung,exynos5422-dmc". +- clocks : list of clock specifiers, must contain an entry for each + required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL, + CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL, + CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX, +- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2", + "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore", + "mout_mclk_cdrex" entries +- devfreq-events : phandles for PPMU devices connected to this DMC. +- vdd-supply : phandle for voltage regulator which is connected. +- reg : registers of two CDREX controllers. +- operating-points-v2 : phandle for OPPs described in v2 definition. +- device-handle : phandle of the connected DRAM memory device. For more + information please refer to documentation file: + Documentation/devicetree/bindings/ddr/lpddr3.txt +- devfreq-events : phandles of the PPMU events used by the controller. +- samsung,syscon-clk : phandle of the clock register set used by the controller, + these registers are used for enabling a 'pause' feature and are not + exposed by clock framework but they must be used in a safe way. + The register offsets are in the driver code and specyfic for this SoC + type. + +Optional properties for DMC device for Exynos5422: +- interrupt-parent : The parent interrupt controller. +- interrupts : Contains the IRQ line numbers for the DMC internal performance + event counters in DREX0 and DREX1 channels. Align with specification of the + interrupt line(s) in the interrupt-parent controller. +- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the + same as in the 'interrupts' list above. + +Example: + + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event_dmc0_0: ppmu-event3-dmc0_0 { + event-name = "ppmu-event3-dmc0_0"; + }; + }; + }; + + dmc: memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MCLK_CDREX>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mclk_cdrex"; + operating-points-v2 = <&dmc_opp_table>; + devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + vdd-supply = <&buck1_reg>; + samsung,syscon-clk = <&clock>; + interrupt-parent = <&combiner>; + interrupts = <16 0>, <16 1>; + interrupt-names = "drex_0", "drex_1"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml new file mode 100644 index 000000000000..22a94b6fdbde --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra124-mc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 SoC Memory Controller + +maintainers: + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + Tegra124 SoC features a hybrid 2x32-bit / 1x64-bit memory controller. + These are interleaved to provide high performance with the load shared across + two memory channels. The Tegra124 Memory Controller handles memory requests + from internal clients and arbitrates among them to allocate memory bandwidth + for DDR3L and LPDDR3 SDRAMs. + +properties: + compatible: + const: nvidia,tegra124-mc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mc + + interrupts: + maxItems: 1 + + "#reset-cells": + const: 1 + + "#iommu-cells": + const: 1 + +patternProperties: + "^emc-timings-[0-9]+$": + type: object + properties: + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Value of RAM_CODE this timing set is used for. + + patternProperties: + "^timing-[0-9]+$": + type: object + properties: + clock-frequency: + description: + Memory clock rate in Hz. + minimum: 1000000 + maximum: 1066000000 + + nvidia,emem-configuration: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Values to be written to the EMEM register block. See section + "15.6.1 MC Registers" in the TRM. + items: + - description: MC_EMEM_ARB_CFG + - description: MC_EMEM_ARB_OUTSTANDING_REQ + - description: MC_EMEM_ARB_TIMING_RCD + - description: MC_EMEM_ARB_TIMING_RP + - description: MC_EMEM_ARB_TIMING_RC + - description: MC_EMEM_ARB_TIMING_RAS + - description: MC_EMEM_ARB_TIMING_FAW + - description: MC_EMEM_ARB_TIMING_RRD + - description: MC_EMEM_ARB_TIMING_RAP2PRE + - description: MC_EMEM_ARB_TIMING_WAP2PRE + - description: MC_EMEM_ARB_TIMING_R2R + - description: MC_EMEM_ARB_TIMING_W2W + - description: MC_EMEM_ARB_TIMING_R2W + - description: MC_EMEM_ARB_TIMING_W2R + - description: MC_EMEM_ARB_DA_TURNS + - description: MC_EMEM_ARB_DA_COVERS + - description: MC_EMEM_ARB_MISC0 + - description: MC_EMEM_ARB_MISC1 + - description: MC_EMEM_ARB_RING1_THROTTLE + + required: + - clock-frequency + - nvidia,emem-configuration + + additionalProperties: false + + required: + - nvidia,ram-code + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#reset-cells" + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + memory-controller@70019000 { + compatible = "nvidia,tegra124-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <1>; + #reset-cells = <1>; + + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml new file mode 100644 index 000000000000..e4135bac6957 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -0,0 +1,339 @@ +# SPDX-License-Identifier: (GPL-2.0) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra30-emc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 SoC External Memory Controller + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The EMC interfaces with the off-chip SDRAM to service the request stream + sent from Memory Controller. The EMC also has various performance-affecting + settings beyond the obvious SDRAM configuration parameters and initialization + settings. Tegra30 EMC supports multiple JEDEC standard protocols: LPDDR2, + LPDDR3, and DDR3. + +properties: + compatible: + const: nvidia,tegra30-emc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of the Memory Controller node. + +patternProperties: + "^emc-timings-[0-9]+$": + type: object + properties: + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Value of RAM_CODE this timing set is used for. + + patternProperties: + "^timing-[0-9]+$": + type: object + properties: + clock-frequency: + description: + Memory clock rate in Hz. + minimum: 1000000 + maximum: 900000000 + + nvidia,emc-auto-cal-interval: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pad calibration interval in microseconds. + minimum: 0 + maximum: 2097151 + + nvidia,emc-mode-1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mode Register 1. + + nvidia,emc-mode-2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mode Register 2. + + nvidia,emc-mode-reset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mode Register 0. + + nvidia,emc-zcal-cnt-long: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of EMC clocks to wait before issuing any commands after + sending ZCAL_MRW_CMD. + minimum: 0 + maximum: 1023 + + nvidia,emc-cfg-dyn-self-ref: + type: boolean + description: + Dynamic self-refresh enabled. + + nvidia,emc-cfg-periodic-qrst: + type: boolean + description: + FBIO "read" FIFO periodic resetting enabled. + + nvidia,emc-configuration: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + description: + EMC timing characterization data. These are the registers + (see section "18.13.2 EMC Registers" in the TRM) whose values + need to be specified, according to the board documentation. + items: + - description: EMC_RC + - description: EMC_RFC + - description: EMC_RAS + - description: EMC_RP + - description: EMC_R2W + - description: EMC_W2R + - description: EMC_R2P + - description: EMC_W2P + - description: EMC_RD_RCD + - description: EMC_WR_RCD + - description: EMC_RRD + - description: EMC_REXT + - description: EMC_WEXT + - description: EMC_WDV + - description: EMC_QUSE + - description: EMC_QRST + - description: EMC_QSAFE + - description: EMC_RDV + - description: EMC_REFRESH + - description: EMC_BURST_REFRESH_NUM + - description: EMC_PRE_REFRESH_REQ_CNT + - description: EMC_PDEX2WR + - description: EMC_PDEX2RD + - description: EMC_PCHG2PDEN + - description: EMC_ACT2PDEN + - description: EMC_AR2PDEN + - description: EMC_RW2PDEN + - description: EMC_TXSR + - description: EMC_TXSRDLL + - description: EMC_TCKE + - description: EMC_TFAW + - description: EMC_TRPAB + - description: EMC_TCLKSTABLE + - description: EMC_TCLKSTOP + - description: EMC_TREFBW + - description: EMC_QUSE_EXTRA + - description: EMC_FBIO_CFG6 + - description: EMC_ODT_WRITE + - description: EMC_ODT_READ + - description: EMC_FBIO_CFG5 + - description: EMC_CFG_DIG_DLL + - description: EMC_CFG_DIG_DLL_PERIOD + - description: EMC_DLL_XFORM_DQS0 + - description: EMC_DLL_XFORM_DQS1 + - description: EMC_DLL_XFORM_DQS2 + - description: EMC_DLL_XFORM_DQS3 + - description: EMC_DLL_XFORM_DQS4 + - description: EMC_DLL_XFORM_DQS5 + - description: EMC_DLL_XFORM_DQS6 + - description: EMC_DLL_XFORM_DQS7 + - description: EMC_DLL_XFORM_QUSE0 + - description: EMC_DLL_XFORM_QUSE1 + - description: EMC_DLL_XFORM_QUSE2 + - description: EMC_DLL_XFORM_QUSE3 + - description: EMC_DLL_XFORM_QUSE4 + - description: EMC_DLL_XFORM_QUSE5 + - description: EMC_DLL_XFORM_QUSE6 + - description: EMC_DLL_XFORM_QUSE7 + - description: EMC_DLI_TRIM_TXDQS0 + - description: EMC_DLI_TRIM_TXDQS1 + - description: EMC_DLI_TRIM_TXDQS2 + - description: EMC_DLI_TRIM_TXDQS3 + - description: EMC_DLI_TRIM_TXDQS4 + - description: EMC_DLI_TRIM_TXDQS5 + - description: EMC_DLI_TRIM_TXDQS6 + - description: EMC_DLI_TRIM_TXDQS7 + - description: EMC_DLL_XFORM_DQ0 + - description: EMC_DLL_XFORM_DQ1 + - description: EMC_DLL_XFORM_DQ2 + - description: EMC_DLL_XFORM_DQ3 + - description: EMC_XM2CMDPADCTRL + - description: EMC_XM2DQSPADCTRL2 + - description: EMC_XM2DQPADCTRL2 + - description: EMC_XM2CLKPADCTRL + - description: EMC_XM2COMPPADCTRL + - description: EMC_XM2VTTGENPADCTRL + - description: EMC_XM2VTTGENPADCTRL2 + - description: EMC_XM2QUSEPADCTRL + - description: EMC_XM2DQSPADCTRL3 + - description: EMC_CTT_TERM_CTRL + - description: EMC_ZCAL_INTERVAL + - description: EMC_ZCAL_WAIT_CNT + - description: EMC_MRS_WAIT_CNT + - description: EMC_AUTO_CAL_CONFIG + - description: EMC_CTT + - description: EMC_CTT_DURATION + - description: EMC_DYN_SELF_REF_CONTROL + - description: EMC_FBIO_SPARE + - description: EMC_CFG_RSV + + required: + - clock-frequency + - nvidia,emc-auto-cal-interval + - nvidia,emc-mode-1 + - nvidia,emc-mode-2 + - nvidia,emc-mode-reset + - nvidia,emc-zcal-cnt-long + - nvidia,emc-configuration + + additionalProperties: false + + required: + - nvidia,ram-code + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - nvidia,memory-controller + +additionalProperties: false + +examples: + - | + external-memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&tegra_car 57>; + + nvidia,memory-controller = <&mc>; + + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000b71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000020 /* EMC_RC */ + 0x0000006a /* EMC_RFC */ + 0x00000017 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000c /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000011 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001412 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000e /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x00000016 /* EMC_RW2PDEN */ + 0x00000072 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000007 /* EMC_TCLKSTOP */ + 0x00001453 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf00b0191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000008 /* EMC_DLL_XFORM_DQS0 */ + 0x00000008 /* EMC_DLL_XFORM_DQS1 */ + 0x00000008 /* EMC_DLL_XFORM_DQS2 */ + 0x00000008 /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x0c000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0155000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt deleted file mode 100644 index a878b5908a4d..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt +++ /dev/null @@ -1,123 +0,0 @@ -NVIDIA Tegra Memory Controller device tree bindings -=================================================== - -memory-controller node ----------------------- - -Required properties: -- compatible: Should be "nvidia,tegra<chip>-mc" -- reg: Physical base address and length of the controller's registers. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - mc: the module's clock input -- interrupts: The interrupt outputs from the controller. -- #reset-cells : Should be 1. This cell represents memory client module ID. - The assignments may be found in header file <dt-bindings/memory/tegra30-mc.h> - or in the TRM documentation. - -Required properties for Tegra30, Tegra114, Tegra124, Tegra132 and Tegra210: -- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines - the SWGROUP of the master. - -This device implements an IOMMU that complies with the generic IOMMU binding. -See ../iommu/iommu.txt for details. - -emc-timings subnode -------------------- - -The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in -register PMC_STRAPPING_OPT_A). - -Required properties for "emc-timings" nodes : -- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for. - -timing subnode --------------- - -Each "emc-timings" node should contain a subnode for every supported EMC clock rate. - -Required properties for timing nodes : -- clock-frequency : Should contain the memory clock rate in Hz. -- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC -(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be -specified, according to the board documentation: - - MC_EMEM_ARB_CFG - MC_EMEM_ARB_OUTSTANDING_REQ - MC_EMEM_ARB_TIMING_RCD - MC_EMEM_ARB_TIMING_RP - MC_EMEM_ARB_TIMING_RC - MC_EMEM_ARB_TIMING_RAS - MC_EMEM_ARB_TIMING_FAW - MC_EMEM_ARB_TIMING_RRD - MC_EMEM_ARB_TIMING_RAP2PRE - MC_EMEM_ARB_TIMING_WAP2PRE - MC_EMEM_ARB_TIMING_R2R - MC_EMEM_ARB_TIMING_W2W - MC_EMEM_ARB_TIMING_R2W - MC_EMEM_ARB_TIMING_W2R - MC_EMEM_ARB_DA_TURNS - MC_EMEM_ARB_DA_COVERS - MC_EMEM_ARB_MISC0 - MC_EMEM_ARB_MISC1 - MC_EMEM_ARB_RING1_THROTTLE - -Example SoC include file: - -/ { - mc: memory-controller@70019000 { - compatible = "nvidia,tegra124-mc"; - reg = <0x0 0x70019000 0x0 0x1000>; - clocks = <&tegra_car TEGRA124_CLK_MC>; - clock-names = "mc"; - - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - - #iommu-cells = <1>; - #reset-cells = <1>; - }; - - sdhci@700b0000 { - compatible = "nvidia,tegra124-sdhci"; - ... - iommus = <&mc TEGRA_SWGROUP_SDMMC1A>; - resets = <&mc TEGRA124_MC_RESET_SDMMC1>; - }; -}; - -Example board file: - -/ { - memory-controller@70019000 { - emc-timings-3 { - nvidia,ram-code = <3>; - - timing-12750000 { - clock-frequency = <12750000>; - - nvidia,emem-configuration = < - 0x40040001 /* MC_EMEM_ARB_CFG */ - 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ - 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ - 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ - 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ - 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ - 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ - 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ - 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ - 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ - 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ - 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ - 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ - 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ - 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ - 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ - 0x77e30303 /* MC_EMEM_ARB_MISC0 */ - 0x70000f03 /* MC_EMEM_ARB_MISC1 */ - 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ - >; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml new file mode 100644 index 000000000000..4b9196c83291 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra30-mc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 SoC Memory Controller + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + Tegra30 Memory Controller architecturally consists of the following parts: + + Arbitration Domains, which can handle a single request or response per + clock from a group of clients. Typically, a system has a single Arbitration + Domain, but an implementation may divide the client space into multiple + Arbitration Domains to increase the effective system bandwidth. + + Protocol Arbiter, which manage a related pool of memory devices. A system + may have a single Protocol Arbiter or multiple Protocol Arbiters. + + Memory Crossbar, which routes request and responses between Arbitration + Domains and Protocol Arbiters. In the simplest version of the system, the + Memory Crossbar is just a pass through between a single Arbitration Domain + and a single Protocol Arbiter. + + Global Resources, which include things like configuration registers which + are shared across the Memory Subsystem. + + The Tegra30 Memory Controller handles memory requests from internal clients + and arbitrates among them to allocate memory bandwidth for DDR3L and LPDDR2 + SDRAMs. + +properties: + compatible: + const: nvidia,tegra30-mc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mc + + interrupts: + maxItems: 1 + + "#reset-cells": + const: 1 + + "#iommu-cells": + const: 1 + +patternProperties: + "^emc-timings-[0-9]+$": + type: object + properties: + nvidia,ram-code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Value of RAM_CODE this timing set is used for. + + patternProperties: + "^timing-[0-9]+$": + type: object + properties: + clock-frequency: + description: + Memory clock rate in Hz. + minimum: 1000000 + maximum: 900000000 + + nvidia,emem-configuration: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Values to be written to the EMEM register block. See section + "18.13.1 MC Registers" in the TRM. + items: + - description: MC_EMEM_ARB_CFG + - description: MC_EMEM_ARB_OUTSTANDING_REQ + - description: MC_EMEM_ARB_TIMING_RCD + - description: MC_EMEM_ARB_TIMING_RP + - description: MC_EMEM_ARB_TIMING_RC + - description: MC_EMEM_ARB_TIMING_RAS + - description: MC_EMEM_ARB_TIMING_FAW + - description: MC_EMEM_ARB_TIMING_RRD + - description: MC_EMEM_ARB_TIMING_RAP2PRE + - description: MC_EMEM_ARB_TIMING_WAP2PRE + - description: MC_EMEM_ARB_TIMING_R2R + - description: MC_EMEM_ARB_TIMING_W2W + - description: MC_EMEM_ARB_TIMING_R2W + - description: MC_EMEM_ARB_TIMING_W2R + - description: MC_EMEM_ARB_DA_TURNS + - description: MC_EMEM_ARB_DA_COVERS + - description: MC_EMEM_ARB_MISC0 + - description: MC_EMEM_ARB_RING1_THROTTLE + + required: + - clock-frequency + - nvidia,emem-configuration + + additionalProperties: false + + required: + - nvidia,ram-code + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#reset-cells" + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + memory-controller@7000f000 { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x400>; + clocks = <&tegra_car 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <1>; + #reset-cells = <1>; + + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emem-configuration = < + 0x0000000a /* MC_EMEM_ARB_CFG */ + 0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000010 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000b /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b10 /* MC_EMEM_ARB_DA_COVERS */ + 0x70ea1f11 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 4b1a09acb98b..39afacc447b2 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#thermal-sensor-cells": diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index 64bca41031d5..e82c9a07b6fb 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index b5b3cf5b1ac2..5d3fa412aabd 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index ae4796ec50a0..8d8560a67abf 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml index e5562c525ed9..767193ec1d32 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 MDIO Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "mdio.yaml#" diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml index f683b7104e3e..703d0d886884 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 11654d4b80fb..db36b4d86484 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -8,7 +8,7 @@ title: Allwinner A83t EMAC Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index 770af7c46114..a95960ee3feb 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 CAN Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 27e1b4cebfbd..6bdcc3f84bd3 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -10,7 +10,6 @@ Required properties: - #size-cells: 0 - spi-max-frequency: Maximum frequency of the SPI bus the chip can operate at should be less than or equal to 18 MHz. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. - interrupt-parent: the phandle to the interrupt controller which provides the interrupt. - interrupts: interrupt specification for data-ready. @@ -23,6 +22,7 @@ Optional properties: reset. - device-state-gpios: Input GPIO that indicates if the device is in a sleep state or if the device is active. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Example: tcan4x5x: tcan4x5x@0 { @@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 { interrupts = <14 GPIO_ACTIVE_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; }; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 4845e29411e4..e08cd4c4d568 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -347,6 +347,7 @@ allOf: - st,spear600-gmac then: + properties: snps,tso: $ref: /schemas/types.yaml#definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 81ae8cafabc1..ac8c76369a86 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml# @@ -44,7 +44,6 @@ properties: description: CPSW functional clock clock-names: - maxItems: 1 items: - const: fck @@ -70,7 +69,6 @@ properties: Phandle to the system control device node which provides access to efuse IO range with MAC addresses - ethernet-ports: type: object properties: @@ -82,8 +80,6 @@ properties: patternProperties: "^port@[0-9]+$": type: object - minItems: 1 - maxItems: 2 description: CPSW external ports allOf: @@ -91,23 +87,20 @@ properties: properties: reg: - maxItems: 1 - enum: [1, 2] + items: + - enum: [1, 2] description: CPSW port number phys: - $ref: /schemas/types.yaml#definitions/phandle-array maxItems: 1 description: phandle on phy-gmii-sel PHY label: - $ref: /schemas/types.yaml#/definitions/string-array - maxItems: 1 description: label associated with this port ti,dual-emac-pvid: - $ref: /schemas/types.yaml#/definitions/uint32 - maxItems: 1 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 1024 description: @@ -136,7 +129,6 @@ properties: description: CPTS reference clock clock-names: - maxItems: 1 items: - const: cpts @@ -201,7 +193,7 @@ examples: phys = <&phy_gmii_sel 1>; phy-handle = <ðphy0_sw>; phy-mode = "rgmii"; - ti,dual_emac_pvid = <1>; + ti,dual-emac-pvid = <1>; }; cpsw_port2: port@2 { @@ -211,7 +203,7 @@ examples: phys = <&phy_gmii_sel 2>; phy-handle = <ðphy1_sw>; phy-mode = "rgmii"; - ti,dual_emac_pvid = <2>; + ti,dual-emac-pvid = <2>; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 659b02002a35..daf1321d76ad 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Security ID Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> allOf: - $ref: "nvmem.yaml#" diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index 2e0723ab3384..f7b3ed74db54 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -4,6 +4,7 @@ Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" - clocks: phandle to the efuse peripheral clock provided by the clock controller. +- secure-monitor: phandle to the secure-monitor node = Data cells = Are child nodes of eFuse, bindings of which as described in @@ -16,6 +17,7 @@ Example: clocks = <&clkc CLKID_EFUSE>; #address-cells = <1>; #size-cells = <1>; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -30,6 +32,10 @@ Example: }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + = Data consumers = Are device nodes which consume nvmem data cells. diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml index fa46670de299..230d74f22136 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#phy-cells": diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt new file mode 100644 index 000000000000..7183b9102f91 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt @@ -0,0 +1,13 @@ +Marvell MMP3 USB PHY +-------------------- + +Required properties: +- compatible: must be "marvell,mmp3-usb-phy" +- #phy-cells: must be 0 + +Example: + usb-phy: usb-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index cd0503b6fe36..bfefd09d8c1e 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Pin Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#gpio-cells": diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt index eb35b22f9e23..bc75bf49cdae 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt @@ -5,6 +5,7 @@ which then translates it into a corresponding voltage on a rail Required Properties: - compatible: Should be one of the following + * qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC * qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC * qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index eae2a880155a..acb41fade926 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -12,6 +12,7 @@ Required properties: - "renesas,r8a7745-sysc" (RZ/G1E) - "renesas,r8a77470-sysc" (RZ/G1C) - "renesas,r8a774a1-sysc" (RZ/G2M) + - "renesas,r8a774b1-sysc" (RZ/G2N) - "renesas,r8a774c0-sysc" (RZ/G2E) - "renesas,r8a7779-sysc" (R-Car H1) - "renesas,r8a7790-sysc" (R-Car H2) @@ -21,6 +22,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77961-sysc" (R-Car M3-W+) - "renesas,r8a77965-sysc" (R-Car M3-N) - "renesas,r8a77970-sysc" (R-Car V3M) - "renesas,r8a77980-sysc" (R-Car V3H) diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 0ac52f83a58c..4a21fe77ee1d 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 PWM Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#pwm-cells": diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt index 69cae11d80a6..95536d83c5f2 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt @@ -6,7 +6,7 @@ Required properties: - "mediatek,mt7622-pwm": found on mt7622 SoC. - "mediatek,mt7623-pwm": found on mt7623 SoC. - "mediatek,mt7628-pwm": found on mt7628 SoC. - - "mediatek,mt7629-pwm", "mediatek,mt7622-pwm": found on mt7629 SoC. + - "mediatek,mt7629-pwm": found on mt7629 SoC. - "mediatek,mt8516-pwm": found on mt8516 SoC. - reg: physical base address and length of the controller's registers. - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of diff --git a/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt new file mode 100644 index 000000000000..4bf2dbf7c6cc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt @@ -0,0 +1,65 @@ +NVIDIA Tegra Regulators Coupling +================================ + +NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators. +Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30 +there are 2. + +Tegra20 voltage coupling +------------------------ + +On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU. +The CORE and RTC voltages shall be in a range of 170mV from each other +and they both shall be higher than the CPU voltage by at least 120mV. + +Tegra30 voltage coupling +------------------------ + +On Tegra30 SoC's there are 2 coupled regulators: CORE and CPU. The CORE +and CPU voltages shall be in a range of 300mV from each other and CORE +voltage shall be higher than the CPU by N mV, where N depends on the CPU +voltage. + +Required properties: +- nvidia,tegra-core-regulator: Boolean property that designates regulator + as the "Core domain" voltage regulator. +- nvidia,tegra-rtc-regulator: Boolean property that designates regulator + as the "RTC domain" voltage regulator. +- nvidia,tegra-cpu-regulator: Boolean property that designates regulator + as the "CPU domain" voltage regulator. + +Example: + + pmic { + regulators { + core_vdd_reg: core { + regulator-name = "vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 550000>; + + nvidia,tegra-core-regulator; + }; + + rtc_vdd_reg: rtc { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; + regulator-coupled-max-spread = <170000 550000>; + + nvidia,tegra-rtc-regulator; + }; + + cpu_vdd_reg: cpu { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; + regulator-coupled-max-spread = <550000 550000>; + + nvidia,tegra-cpu-regulator; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index acf18d170352..c0d83865e933 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -50,6 +50,8 @@ properties: description: Should contain the WWDG1 watchdog reset interrupt maxItems: 1 + wakeup-source: true + mboxes: description: This property is required only if the rpmsg/virtio functionality is used. diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt index 26e542eb96df..43e580ef64ba 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt @@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Required properties: -- compatible: 'amlogic,meson-axg-audio-arb' +- compatible: 'amlogic,meson-axg-audio-arb' or + 'amlogic,meson-sm1-audio-arb' - reg: physical base address of the controller and length of memory mapped region. - clocks: phandle to the fifo peripheral clock provided by the audio diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index 00917d868d58..b3f57d81f007 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -16,6 +16,7 @@ properties: - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs + - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt index 6e5341b4f891..ee59409640f2 100644 --- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt +++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt @@ -22,6 +22,6 @@ Example: }; ðernet_switch { - resets = <&reset>; + resets = <&reset 26>; reset-names = "switch"; }; diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt deleted file mode 100644 index 510c748656ec..000000000000 --- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt +++ /dev/null @@ -1,52 +0,0 @@ -Qualcomm AOSS Reset Controller -====================================== - -This binding describes a reset-controller found on AOSS-CC (always on subsystem) -for Qualcomm SDM845 SoCs. - -Required properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,sdm845-aoss-cc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the register - space. - -- #reset-cells: - Usage: required - Value type: <uint> - Definition: must be 1; cell entry represents the reset index. - -Example: - -aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sdm845-aoss-cc"; - reg = <0xc2a0000 0x31000>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indicies see -<dt-bindings/reset/qcom,sdm845-aoss.h> - -Example: - -modem-pil@4080000 { - ... - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>; - reset-names = "mss_restart"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml new file mode 100644 index 000000000000..e2d85a1e1d63 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm AOSS Reset Controller + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + The bindings describe the reset-controller found on AOSS-CC (always on + subsystem) for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-aoss-cc" + - const: "qcom,sdm845-aoss-cc" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-aoss-cc" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt deleted file mode 100644 index a62a492843e7..000000000000 --- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt +++ /dev/null @@ -1,52 +0,0 @@ -PDC Global -====================================== - -This binding describes a reset-controller found on PDC-Global (Power Domain -Controller) block for Qualcomm Technologies Inc SDM845 SoCs. - -Required properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,sdm845-pdc-global" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the register - space. - -- #reset-cells: - Usage: required - Value type: <uint> - Definition: must be 1; cell entry represents the reset index. - -Example: - -pdc_reset: reset-controller@b2e0000 { - compatible = "qcom,sdm845-pdc-global"; - reg = <0xb2e0000 0x20000>; - #reset-cells = <1>; -}; - -PDC reset clients -====================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For a list of all valid reset indices see -<dt-bindings/reset/qcom,sdm845-pdc.h> - -Example: - -modem-pil@4080000 { - ... - - resets = <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "pdc_reset"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml new file mode 100644 index 000000000000..d7d8cec9419f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PDC Global + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + The bindings describes the reset-controller found on PDC-Global (Power Domain + Controller) block for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-pdc-global" + - const: "qcom,sdm845-pdc-global" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-pdc-global" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0xb2e0000 0x20000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index b03c48a1150e..de7f06ccd003 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -20,6 +20,7 @@ Required properties: - "renesas,r8a7745-rst" (RZ/G1E) - "renesas,r8a77470-rst" (RZ/G1C) - "renesas,r8a774a1-rst" (RZ/G2M) + - "renesas,r8a774b1-rst" (RZ/G2N) - "renesas,r8a774c0-rst" (RZ/G2E) - "renesas,r8a7778-reset-wdt" (R-Car M1A) - "renesas,r8a7779-reset-wdt" (R-Car H1) @@ -30,6 +31,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77961-rst" (R-Car M3-W+) - "renesas,r8a77965-rst" (R-Car M3-N) - "renesas,r8a77970-rst" (R-Car V3M) - "renesas,r8a77980-rst" (R-Car V3H) diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index ea005177d20a..e320a8cc9e4d 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -130,6 +130,7 @@ this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3 "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 @@ -141,12 +142,12 @@ Required properties: - clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others - resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others Example: diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml index 46d69c32b89b..478b0234e8fa 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml index d7a57ec4a640..37c2a601c3fa 100644 --- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml @@ -8,7 +8,7 @@ title: Allwinner A31 RTC Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#clock-cells": diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml index ee9712f1c97d..2ecab8ed702a 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 PS2 Host Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> description: A20 PS2 is dual role controller (PS2 host and PS2 device). These diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt index e284e4e1ccd5..5a33619d881d 100644 --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -5,7 +5,7 @@ and power management. Required properites: - reg : Offset and length of the register set of the RCPM block. - - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the fsl,rcpm-wakeup property. - compatible : Must contain a chip-specific RCPM block compatible string and (if applicable) may contain a chassis-version RCPM compatible @@ -20,6 +20,7 @@ Required properites: * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm All references to "1.0" and "2.0" refer to the QorIQ chassis version to which the chip complies. @@ -27,14 +28,19 @@ Chassis Version Example Chips --------------- ------------------------------- 1.0 p4080, p5020, p5040, p2041, p3041 2.0 t4240, b4860, b4420 -2.1 t1040, ls1021 +2.1 t1040, +2.1+ ls1021a, ls1012a, ls1043a, ls1046a + +Optional properties: + - little-endian : RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). Example: The RCPM node for T4240: rcpm: global-utilities@e2000 { compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; reg = <0xe2000 0x1000>; - fsl,#rcpm-wakeup-cells = <2>; + #fsl,rcpm-wakeup-cells = <2>; }; * Freescale RCPM Wakeup Source Device Tree Bindings @@ -44,7 +50,7 @@ can be used as a wakeup source. - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR register cells. The number of IPPDEXPCR register cells is defined in - "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is the bit mask that should be set in IPPDEXPCR0, and the second register cell is for IPPDEXPCR1, and so on. diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt index f3fa313963d5..616fddcd09fd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -22,6 +22,7 @@ resources. "qcom,rpm-apq8084" "qcom,rpm-msm8916" "qcom,rpm-msm8974" + "qcom,rpm-msm8976" "qcom,rpm-msm8998" "qcom,rpm-sdm660" "qcom,rpm-qcs404" diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index 46e27cd69f18..f96511aa3897 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -10,6 +10,12 @@ From RK3368 SoCs, the GRF is divided into two sections, On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, +ON RK3308 SoC, the GRF is divided into four sections: +- GRF, used for general non-secure system, +- SGRF, used for general secure system, +- DETECTGRF, used for audio codec system, +- COREGRF, used for pvtm, + Required Properties: - compatible: GRF should be one of the following: @@ -19,19 +25,25 @@ Required Properties: - "rockchip,rk3188-grf", "syscon": for rk3188 - "rockchip,rk3228-grf", "syscon": for rk3228 - "rockchip,rk3288-grf", "syscon": for rk3288 + - "rockchip,rk3308-grf", "syscon": for rk3308 - "rockchip,rk3328-grf", "syscon": for rk3328 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 - "rockchip,rv1108-grf", "syscon": for rv1108 +- compatible: DETECTGRF should be one of the following: + - "rockchip,rk3308-detect-grf", "syscon": for rk3308 +- compatilbe: COREGRF should be one of the following: + - "rockchip,rk3308-core-grf", "syscon": for rk3308 - compatible: PMUGRF should be one of the following: - "rockchip,px30-pmugrf", "syscon": for px30 - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 -- compatible: SGRF should be one of the following +- compatible: SGRF should be one of the following: - "rockchip,rk3288-sgrf", "syscon": for rk3288 -- compatible: USB2PHYGRF should be one of the followings +- compatible: USB2PHYGRF should be one of the following: + - "rockchip,px30-usb2phy-grf", "syscon": for px30 - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 -- compatible: USBGRF should be one of the following +- compatible: USBGRF should be one of the following: - "rockchip,rv1108-usbgrf", "syscon": for rv1108 - reg: physical base address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index b8f89c7258eb..ea1d2efb2aaa 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index eb3992138eec..112ae00d63c1 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 I2S Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index 38d4cede0860..444a432912bb 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -10,7 +10,7 @@ maintainers: - Chen-Yu Tsai <wens@csie.org> - Liam Girdwood <lgirdwood@gmail.com> - Mark Brown <broonie@kernel.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml index f290eb72a878..3b764415c9ab 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml @@ -8,7 +8,7 @@ title: Allwinner A64 Analog Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml index 85305b4c2729..9718358826ab 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml @@ -8,7 +8,7 @@ title: Allwinner A23 Analog Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml index 5e7cc05bbff1..55d28268d2f4 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml @@ -8,7 +8,7 @@ title: Allwinner A33 Codec Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#sound-dai-cells": diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index 6d1329c28170..8036499112f5 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index f36c46d236d7..0565dc49e449 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml new file mode 100644 index 000000000000..222990f9923c --- /dev/null +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sram/qcom,ocmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: On Chip Memory (OCMEM) that is present on some Qualcomm Snapdragon SoCs. + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + The On Chip Memory (OCMEM) is typically used by the GPU, camera/video, and + audio components on some Snapdragon SoCs. + +properties: + compatible: + const: qcom,msm8974-ocmem + + reg: + items: + - description: Control registers + - description: OCMEM address range + + reg-names: + items: + - const: ctrl + - const: mem + + clocks: + items: + - description: Core clock + - description: Interface clock + + clock-names: + items: + - const: core + - const: iface + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +patternProperties: + "^.+-sram$": + type: object + description: A region of reserved memory. + + properties: + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + required: + - reg + - ranges + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> + + ocmem: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", + "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", + "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu-sram@0 { + reg = <0x0 0x100000>; + ranges = <0 0 0xfec00000 0x100000>; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml new file mode 100644 index 000000000000..f761681e4c0d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Thermal + +maintainers: + - Guillaume La Roque <glaroque@baylibre.com> + +description: Binding for Amlogic Thermal + +properties: + compatible: + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + amlogic,ao-secure: + description: phandle to the ao-secure syscon + $ref: '/schemas/types.yaml#/definitions/phandle' + + +required: + - compatible + - reg + - interrupts + - clocks + - amlogic,ao-secure + +examples: + - | + cpu_temp: temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt deleted file mode 100644 index 673cc1831ee9..000000000000 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ /dev/null @@ -1,55 +0,0 @@ -* QCOM SoC Temperature Sensor (TSENS) - -Required properties: -- compatible: - Must be one of the following: - - "qcom,msm8916-tsens" (MSM8916) - - "qcom,msm8974-tsens" (MSM8974) - - "qcom,msm8996-tsens" (MSM8996) - - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404) - - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998) - - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845) - The generic "qcom,tsens-v2" property must be used as a fallback for any SoC - with version 2 of the TSENS IP. MSM8996 is the only exception because the - generic property did not exist when support was added. - Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for - any SoC with version 1 of the TSENS IP. - -- reg: Address range of the thermal registers. - New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM - register spaces separately, with order being TM before SROT. - See Example 2, below. - -- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. -- #qcom,sensors: Number of sensors in tsens block -- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify -nvmem cells - -Example 1 (legacy support before a fallback tsens-v2 property was introduced): -tsens: thermal-sensor@900000 { - compatible = "qcom,msm8916-tsens"; - reg = <0x4a8000 0x2000>; - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "caldata", "calsel"; - #thermal-sensor-cells = <1>; - }; - -Example 2 (for any platform containing v2 of the TSENS IP): -tsens0: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, /* TM */ - <0xc222000 0x1ff>; /* SROT */ - #qcom,sensors = <13>; - #thermal-sensor-cells = <1>; - }; - -Example 3 (for any platform containing v1 of the TSENS IP): -tsens: thermal-sensor@4a9000 { - compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; - #qcom,sensors = <10>; - #thermal-sensor-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml new file mode 100644 index 000000000000..eef13b9446a8 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -0,0 +1,170 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM SoC Temperature Sensor (TSENS) + +maintainers: + - Amit Kucheria <amit.kucheria@linaro.org> + +description: | + QCOM SoCs have TSENS IP to allow temperature measurement. There are currently + three distinct major versions of the IP that is supported by a single driver. + The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures + everything before v1 when there was no versioning information. + +properties: + compatible: + oneOf: + - description: v0.1 of TSENS + items: + - enum: + - qcom,msm8916-tsens + - qcom,msm8974-tsens + - const: qcom,tsens-v0_1 + + - description: v1 of TSENS + items: + - enum: + - qcom,msm8976-tsens + - qcom,qcs404-tsens + - const: qcom,tsens-v1 + + - description: v2 of TSENS + items: + - enum: + - qcom,msm8996-tsens + - qcom,msm8998-tsens + - qcom,sdm845-tsens + - const: qcom,tsens-v2 + + reg: + maxItems: 2 + items: + - description: TM registers + - description: SROT registers + + nvmem-cells: + minItems: 1 + maxItems: 2 + description: + Reference to an nvmem node for the calibration data + + nvmem-cells-names: + minItems: 1 + maxItems: 2 + items: + - enum: + - caldata + - calsel + + "#qcom,sensors": + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + - maximum: 16 + description: + Number of sensors enabled on this platform + + "#thermal-sensor-cells": + const: 1 + description: + Number of cells required to uniquely identify the thermal sensors. Since + we have multiple sensors this is set to 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8916-tsens + - qcom,msm8974-tsens + - qcom,msm8976-tsens + - qcom,qcs404-tsens + - qcom,tsens-v0_1 + - qcom,tsens-v1 + then: + properties: + interrupts: + items: + - description: Combined interrupt if upper or lower threshold crossed + interrupt-names: + items: + - const: uplow + + else: + properties: + interrupts: + items: + - description: Combined interrupt if upper or lower threshold crossed + - description: Interrupt if critical threshold crossed + interrupt-names: + items: + - const: uplow + - const: critical + +required: + - compatible + - reg + - "#qcom,sensors" + - interrupts + - interrupt-names + - "#thermal-sensor-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 1 (legacy: for pre v1 IP): + tsens1: thermal-sensor@900000 { + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "caldata", "calsel"; + + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 2 (for any platform containing v1 of the TSENS IP): + tsens2: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example 3 (for any platform containing v2 of the TSENS IP): + tsens3: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, + <0xc222000 0x1ff>; + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt index b6ab60f6abbf..12c740b975f7 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -8,6 +8,7 @@ Required properties: - compatible : "renesas,<soctype>-thermal", Examples with soctypes are: - "renesas,r8a774a1-thermal" (RZ/G2M) + - "renesas,r8a774b1-thermal" (RZ/G2N) - "renesas,r8a7795-thermal" (R-Car H3) - "renesas,r8a7796-thermal" (R-Car M3-W) - "renesas,r8a77965-thermal" (R-Car M3-N) diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index 20adc1c8e9cc..23e989e09766 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 Timer Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml index dfa0c41fd261..40fc4bcb3145 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml @@ -8,7 +8,7 @@ title: Allwinner A13 High-Speed Timer Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 74c3eadad844..0d256486f886 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -21,6 +21,7 @@ Required properties: * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) For those SoCs that use SYST + * "mediatek,mt8183-timer" for MT8183 compatible timers (SYST) * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index 13ad07416bdd..9dff7e5cae6a 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -10,6 +10,7 @@ Required Properties: - compatible: must contain one or more of the following: - "renesas,tmu-r8a7740" for the r8a7740 TMU + - "renesas,tmu-r8a774a1" for the r8a774A1 TMU - "renesas,tmu-r8a774c0" for the r8a774C0 TMU - "renesas,tmu-r8a7778" for the r8a7778 TMU - "renesas,tmu-r8a7779" for the r8a7779 TMU diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index 0af70fc8de5a..d9207bf9d894 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -8,7 +8,7 @@ title: Allwinner A10 mUSB OTG Controller Device Tree Bindings maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index fd6fa07c45b8..6046f4555852 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -707,6 +707,8 @@ patternProperties: description: Ortus Technology Co., Ltd. "^osddisplays,.*": description: OSD Displays + "^overkiz,.*": + description: Overkiz SAS "^ovti,.*": description: OmniVision Technologies "^oxsemi,.*": @@ -990,6 +992,8 @@ patternProperties: description: Ubiquiti Networks "^udoo,.*": description: Udoo + "^ugoos,.*": + description: Ugoos Industrial Co., Ltd. "^uniwest,.*": description: United Western Technologies Corp (UniWest) "^upisemi,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index 3a54f58683a0..e8f226376108 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -11,7 +11,7 @@ allOf: maintainers: - Chen-Yu Tsai <wens@csie.org> - - Maxime Ripard <maxime.ripard@bootlin.com> + - Maxime Ripard <mripard@kernel.org> properties: compatible: diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst index fab2c9b36d08..b40b1f839148 100644 --- a/Documentation/driver-api/thermal/sysfs-api.rst +++ b/Documentation/driver-api/thermal/sysfs-api.rst @@ -725,24 +725,10 @@ method, the sys I/F structure will be built like this:: |---temp1_input: 37000 |---temp1_crit: 100000 -4. Event Notification +4. Export Symbol APIs ===================== -The framework includes a simple notification mechanism, in the form of a -netlink event. Netlink socket initialization is done during the _init_ -of the framework. Drivers which intend to use the notification mechanism -just need to call thermal_generate_netlink_event() with two arguments viz -(originator, event). The originator is a pointer to struct thermal_zone_device -from where the event has been originated. An integer which represents the -thermal zone device will be used in the message to identify the zone. The -event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL, -THERMAL_DEV_FAULT}. Notification can be sent when the current temperature -crosses any of the configured thresholds. - -5. Export Symbol APIs -===================== - -5.1. get_tz_trend +4.1. get_tz_trend ----------------- This function returns the trend of a thermal zone, i.e the rate of change @@ -751,14 +737,14 @@ are supposed to implement the callback. If they don't, the thermal framework calculated the trend by comparing the previous and the current temperature values. -5.2. get_thermal_instance +4.2. get_thermal_instance ------------------------- This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -5.3. thermal_notify_framework +4.3. thermal_notify_framework ----------------------------- This function handles the trip events from sensor drivers. It starts @@ -768,14 +754,14 @@ and does actual throttling for other trip points i.e ACTIVE and PASSIVE. The throttling policy is based on the configured platform data; if no platform data is provided, this uses the step_wise throttling policy. -5.4. thermal_cdev_update +4.4. thermal_cdev_update ------------------------ This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. -6. thermal_emergency_poweroff +5. thermal_emergency_poweroff ============================= On an event of critical trip temperature crossing. Thermal framework diff --git a/Documentation/filesystems/erofs.txt b/Documentation/filesystems/erofs.txt index b0c085326e2e..db6d39c3ae71 100644 --- a/Documentation/filesystems/erofs.txt +++ b/Documentation/filesystems/erofs.txt @@ -24,11 +24,11 @@ Here is the main features of EROFS: - Metadata & data could be mixed by design; - 2 inode versions for different requirements: - v1 v2 + compact (v1) extended (v2) Inode metadata size: 32 bytes 64 bytes Max file size: 4 GB 16 EB (also limited by max. vol size) Max uids/gids: 65536 4294967296 - File creation time: no yes (64 + 32-bit timestamp) + File change time: no yes (64 + 32-bit timestamp) Max hardlinks: 65536 4294967296 Metadata reserved: 4 bytes 14 bytes @@ -39,7 +39,7 @@ Here is the main features of EROFS: - Support POSIX.1e ACLs by using xattrs; - Support transparent file compression as an option: - LZ4 algorithm with 4 KB fixed-output compression for high performance; + LZ4 algorithm with 4 KB fixed-sized output compression for high performance. The following git tree provides the file system user-space tools under development (ex, formatting tool mkfs.erofs): @@ -85,7 +85,7 @@ All data areas should be aligned with the block size, but metadata areas may not. All metadatas can be now observed in two different spaces (views): 1. Inode metadata space Each valid inode should be aligned with an inode slot, which is a fixed - value (32 bytes) and designed to be kept in line with v1 inode size. + value (32 bytes) and designed to be kept in line with compact inode size. Each inode can be directly found with the following formula: inode offset = meta_blkaddr * block_size + 32 * nid @@ -117,10 +117,10 @@ may not. All metadatas can be now observed in two different spaces (views): |-> aligned with 4B Inode could be 32 or 64 bytes, which can be distinguished from a common - field which all inode versions have -- i_advise: + field which all inode versions have -- i_format: __________________ __________________ - | i_advise | | i_advise | + | i_format | | i_format | |__________________| |__________________| | ... | | ... | | | | | @@ -129,12 +129,13 @@ may not. All metadatas can be now observed in two different spaces (views): |__________________| 64 bytes Xattrs, extents, data inline are followed by the corresponding inode with - proper alignes, and they could be optional for different data mappings, - _currently_ there are totally 3 valid data mappings supported: + proper alignment, and they could be optional for different data mappings. + _currently_ total 4 valid data mappings are supported: - 1) flat file data without data inline (no extent); - 2) fixed-output size data compression (must have extents); - 3) flat file data with tail-end data inline (no extent); + 0 flat file data without data inline (no extent); + 1 fixed-sized output data compression (with non-compacted indexes); + 2 flat file data with tail packing data inline (no extent); + 3 fixed-sized output data compression (with compacted indexes, v5.3+). The size of the optional xattrs is indicated by i_xattr_count in inode header. Large xattrs or xattrs shared by many different files can be @@ -182,8 +183,8 @@ introduce another on-disk field at all. Compression ----------- -Currently, EROFS supports 4KB fixed-output clustersize transparent file -compression, as illustrated below: +Currently, EROFS supports 4KB fixed-sized output transparent file compression, +as illustrated below: |---- Variant-Length Extent ----|-------- VLE --------|----- VLE ----- clusterofs clusterofs clusterofs diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.rst index 845d689e0fd7..e443be7928db 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + Written by: Neil Brown Please see MAINTAINERS file for where to send questions. @@ -181,7 +183,7 @@ Kernel config options: worried about backward compatibility with kernels that have the redirect_dir feature and follow redirects even if turned off. -Module options (can also be changed through /sys/module/overlay/parameters/*): +Module options (can also be changed through /sys/module/overlay/parameters/): - "redirect_dir=BOOL": See OVERLAY_FS_REDIRECT_DIR kernel config option above. @@ -263,7 +265,7 @@ top, lower2 the middle and lower3 the bottom layer. Metadata only copy up --------------------- +--------------------- When metadata only copy up feature is enabled, overlayfs will only copy up metadata (as opposed to whole file), when a metadata specific operation @@ -286,10 +288,10 @@ pointed by REDIRECT. This should not be possible on local system as setting "trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible for untrusted layers like from a pen drive. -Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and +Note: redirect_dir={off|nofollow|follow[*]} conflicts with metacopy=on, and results in an error. -(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is +[*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is given. Sharing and copying layers diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 74bef19f69f0..231e6a64957f 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -196,14 +196,11 @@ applicable everywhere (see syntax). or equal to the first symbol and smaller than or equal to the second symbol. -- help text: "help" or "---help---" +- help text: "help" This defines a help text. The end of the help text is determined by the indentation level, this means it ends at the first line which has a smaller indentation than the first line of the help text. - "---help---" and "help" do not differ in behaviour, "---help---" is - used to help visually separate configuration logic from help within - the file as an aid to developers. - misc options: "option" <symbol>[=<value>] diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst index b9b50553bfc5..d7e6534a8505 100644 --- a/Documentation/kbuild/makefiles.rst +++ b/Documentation/kbuild/makefiles.rst @@ -297,9 +297,19 @@ more details, with real examples. If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular) the corresponding obj- variable will be set, and kbuild will descend down in the ext2 directory. - Kbuild only uses this information to decide that it needs to visit - the directory, it is the Makefile in the subdirectory that - specifies what is modular and what is built-in. + + Kbuild uses this information not only to decide that it needs to visit + the directory, but also to decide whether or not to link objects from + the directory into vmlinux. + + When Kbuild descends into the directory with 'y', all built-in objects + from that directory are combined into the built-in.a, which will be + eventually linked into vmlinux. + + When Kbuild descends into the directory with 'm', in contrast, nothing + from that directory will be linked into vmlinux. If the Makefile in + that directory specifies obj-y, those objects will be left orphan. + It is very likely a bug of the Makefile or of dependencies in Kconfig. It is good practice to use a `CONFIG_` variable when assigning directory names. This allows kbuild to totally skip the directory if the diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst index dc60b13fcd09..f5be243d250a 100644 --- a/Documentation/networking/j1939.rst +++ b/Documentation/networking/j1939.rst @@ -339,7 +339,7 @@ To claim an address following code example can be used: .pgn = J1939_PGN_ADDRESS_CLAIMED, .pgn_mask = J1939_PGN_PDU1_MAX, }, { - .pgn = J1939_PGN_ADDRESS_REQUEST, + .pgn = J1939_PGN_REQUEST, .pgn_mask = J1939_PGN_PDU1_MAX, }, { .pgn = J1939_PGN_ADDRESS_COMMANDED, diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index ada573b7d703..edb296c52f61 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -988,7 +988,7 @@ Similarly, if you need to calculate the size of some structure member, use .. code-block:: c - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define sizeof_field(t, f) (sizeof(((t*)0)->f)) There are also min() and max() macros that do strict type checking if you need them. Feel free to peruse that header file to see what else is already diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt index 201f80c7c050..df129f55ace5 100644 --- a/Documentation/scsi/smartpqi.txt +++ b/Documentation/scsi/smartpqi.txt @@ -29,7 +29,7 @@ smartpqi specific entries in /sys smartpqi host attributes: ------------------------- /sys/class/scsi_host/host*/rescan - /sys/class/scsi_host/host*/version + /sys/class/scsi_host/host*/driver_version The host rescan attribute is a write only attribute. Writing to this attribute will trigger the driver to scan for new, changed, or removed diff --git a/Documentation/translations/it_IT/process/coding-style.rst b/Documentation/translations/it_IT/process/coding-style.rst index 8995d2d19f20..8725f2b9e960 100644 --- a/Documentation/translations/it_IT/process/coding-style.rst +++ b/Documentation/translations/it_IT/process/coding-style.rst @@ -1005,7 +1005,7 @@ struttura, usate .. code-block:: c - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define sizeof_field(t, f) (sizeof(((t*)0)->f)) Ci sono anche le macro min() e max() che, se vi serve, effettuano un controllo rigido sui tipi. Sentitevi liberi di leggere attentamente questo file diff --git a/Documentation/translations/zh_CN/process/coding-style.rst b/Documentation/translations/zh_CN/process/coding-style.rst index 4f6237392e65..eae10bc7f86f 100644 --- a/Documentation/translations/zh_CN/process/coding-style.rst +++ b/Documentation/translations/zh_CN/process/coding-style.rst @@ -826,7 +826,7 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除 .. code-block:: c - #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + #define sizeof_field(t, f) (sizeof(((t*)0)->f)) 还有可以做严格的类型检查的 min() 和 max() 宏，如果你需要可以使用它们。你可以 自己看看那个头文件里还定义了什么你可以拿来用的东西，如果有定义的话，你就不应 diff --git a/Documentation/virt/kvm/api.txt b/Documentation/virt/kvm/api.txt index 49183add44e7..ebb37b34dcfc 100644 --- a/Documentation/virt/kvm/api.txt +++ b/Documentation/virt/kvm/api.txt @@ -5,7 +5,7 @@ The Definitive KVM (Kernel-based Virtual Machine) API Documentation ---------------------- The kvm API is a set of ioctls that are issued to control various aspects -of a virtual machine. The ioctls belong to three classes: +of a virtual machine. The ioctls belong to the following classes: - System ioctls: These query and set global attributes which affect the whole kvm subsystem. In addition a system ioctl is used to create @@ -4149,6 +4149,24 @@ Valid values for 'action': #define KVM_PMU_EVENT_ALLOW 0 #define KVM_PMU_EVENT_DENY 1 +4.121 KVM_PPC_SVM_OFF + +Capability: basic +Architectures: powerpc +Type: vm ioctl +Parameters: none +Returns: 0 on successful completion, +Errors: + EINVAL: if ultravisor failed to terminate the secure guest + ENOMEM: if hypervisor failed to allocate new radix page tables for guest + +This ioctl is used to turn off the secure mode of the guest or transition +the guest from secure mode to normal mode. This is invoked when the guest +is reset. This has no effect if called for a normal guest. + +This ioctl issues an ultravisor call to terminate the secure guest, +unpins the VPA pages and releases all the device pages that are used to +track the secure pages by hypervisor. 5. The kvm_run structure ------------------------ |