summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/driver-api/ptp.rst12
-rw-r--r--Documentation/networking/bareudp.rst19
2 files changed, 25 insertions, 6 deletions
diff --git a/Documentation/driver-api/ptp.rst b/Documentation/driver-api/ptp.rst
index a15192e32347..664838ae7776 100644
--- a/Documentation/driver-api/ptp.rst
+++ b/Documentation/driver-api/ptp.rst
@@ -23,6 +23,7 @@ PTP hardware clock infrastructure for Linux
+ Ancillary clock features
- Time stamp external events
- Period output signals configurable from user space
+ - Low Pass Filter (LPF) access from user space
- Synchronization of the Linux system time via the PPS subsystem
PTP hardware clock kernel API
@@ -94,3 +95,14 @@ Supported hardware
- Auxiliary Slave/Master Mode Snapshot (optional interrupt)
- Target Time (optional interrupt)
+
+ * Renesas (IDT) ClockMatrix™
+
+ - Up to 4 independent PHC channels
+ - Integrated low pass filter (LPF), access via .adjPhase (compliant to ITU-T G.8273.2)
+ - Programmable output periodic signals
+ - Programmable inputs can time stamp external triggers
+ - Driver and/or hardware configuration through firmware (idtcm.bin)
+ - LPF settings (bandwidth, phase limiting, automatic holdover, physical layer assist (per ITU-T G.8273.2))
+ - Programmable output PTP clocks, any frequency up to 1GHz (to other PHY/MAC time stampers, refclk to ASSPs/SoCs/FPGAs)
+ - Lock to GNSS input, automatic switching between GNSS and user-space PHC control (optional)
diff --git a/Documentation/networking/bareudp.rst b/Documentation/networking/bareudp.rst
index 465a8b251bfe..ff406563ea88 100644
--- a/Documentation/networking/bareudp.rst
+++ b/Documentation/networking/bareudp.rst
@@ -26,7 +26,7 @@ Usage
1) Device creation & deletion
- a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype 0x8847.
+ a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc
This creates a bareudp tunnel device which tunnels L3 traffic with ethertype
0x8847 (MPLS traffic). The destination port of the UDP header will be set to
@@ -34,14 +34,21 @@ Usage
b) ip link delete bareudp0
-2) Device creation with multiple proto mode enabled
+2) Device creation with multiproto mode enabled
-There are two ways to create a bareudp device for MPLS & IP with multiproto mode
-enabled.
+The multiproto mode allows bareudp tunnels to handle several protocols of the
+same family. It is currently only available for IP and MPLS. This mode has to
+be enabled explicitly with the "multiproto" flag.
- a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype 0x8847 multiproto
+ a) ip link add dev bareudp0 type bareudp dstport 6635 ethertype ipv4 multiproto
- b) ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls
+ For an IPv4 tunnel the multiproto mode allows the tunnel to also handle
+ IPv6.
+
+ b) ip link add dev bareudp0 type bareudp dstport 6635 ethertype mpls_uc multiproto
+
+ For MPLS, the multiproto mode allows the tunnel to handle both unicast
+ and multicast MPLS packets.
3) Device Usage