diff options
Diffstat (limited to 'Documentation')
40 files changed, 862 insertions, 264 deletions
diff --git a/Documentation/accounting/psi.txt b/Documentation/accounting/psi.txt index b8ca28b60215..7e71c9c1d8e9 100644 --- a/Documentation/accounting/psi.txt +++ b/Documentation/accounting/psi.txt @@ -56,12 +56,12 @@ situation from a state where some tasks are stalled but the CPU is still doing productive work. As such, time spent in this subset of the stall state is tracked separately and exported in the "full" averages. -The ratios are tracked as recent trends over ten, sixty, and three -hundred second windows, which gives insight into short term events as -well as medium and long term trends. The total absolute stall time is -tracked and exported as well, to allow detection of latency spikes -which wouldn't necessarily make a dent in the time averages, or to -average trends over custom time frames. +The ratios (in %) are tracked as recent trends over ten, sixty, and +three hundred second windows, which gives insight into short term events +as well as medium and long term trends. The total absolute stall time +(in us) is tracked and exported as well, to allow detection of latency +spikes which wouldn't necessarily make a dent in the time averages, +or to average trends over custom time frames. Cgroup2 interface ================= diff --git a/Documentation/bpf/btf.rst b/Documentation/bpf/btf.rst index 9a60a5d60e38..7313d354f20e 100644 --- a/Documentation/bpf/btf.rst +++ b/Documentation/bpf/btf.rst @@ -148,16 +148,16 @@ The ``btf_type.size * 8`` must be equal to or greater than ``BTF_INT_BITS()`` for the type. The maximum value of ``BTF_INT_BITS()`` is 128. The ``BTF_INT_OFFSET()`` specifies the starting bit offset to calculate values -for this int. For example, a bitfield struct member has: * btf member bit -offset 100 from the start of the structure, * btf member pointing to an int -type, * the int type has ``BTF_INT_OFFSET() = 2`` and ``BTF_INT_BITS() = 4`` +for this int. For example, a bitfield struct member has: + * btf member bit offset 100 from the start of the structure, + * btf member pointing to an int type, + * the int type has ``BTF_INT_OFFSET() = 2`` and ``BTF_INT_BITS() = 4`` Then in the struct memory layout, this member will occupy ``4`` bits starting from bits ``100 + 2 = 102``. Alternatively, the bitfield struct member can be the following to access the same bits as the above: - * btf member bit offset 102, * btf member pointing to an int type, * the int type has ``BTF_INT_OFFSET() = 0`` and ``BTF_INT_BITS() = 4`` diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt index f4d04a067282..82edbaaa3f85 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt @@ -11,3 +11,15 @@ Example: reg = <0xffd08000 0x1000>; cpu1-start-addr = <0xffd080c4>; }; + +ARM64 - Stratix10 +Required properties: +- compatible : "altr,sys-mgr-s10" +- reg : Should contain 1 register range(address and length) + for system manager register. + +Example: + sysmgr@ffd12000 { + compatible = "altr,sys-mgr-s10"; + reg = <0xffd12000 0x228>; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 365dcf384d73..82dd7582e945 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -228,7 +228,7 @@ patternProperties: - renesas,r9a06g032-smp - rockchip,rk3036-smp - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp + - socionext,milbeaut-m10v-smp - ste,dbx500-smp cpu-release-addr: diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt index 08bab0e94d25..d0ae46d7bac3 100644 --- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt +++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt @@ -26,7 +26,7 @@ Required node properties: Optional node properties: - - ti,mode: Operation mode (see above). + - ti,mode: Operation mode (u8) (see above). Example (operation mode 2): @@ -34,5 +34,5 @@ Example (operation mode 2): adc128d818@1d { compatible = "ti,adc128d818"; reg = <0x1d>; - ti,mode = <2>; + ti,mode = /bits/ 8 <2>; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt index dcc8390e0d24..dcc8390e0d24 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt index ee4c32454198..ee4c32454198 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt index bd81a482634f..bd81a482634f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt index 49df0053347a..49df0053347a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt index 94a425eaa6c7..94a425eaa6c7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.txt b/Documentation/devicetree/bindings/input/max77650-onkey.txt new file mode 100644 index 000000000000..477dc74f452a --- /dev/null +++ b/Documentation/devicetree/bindings/input/max77650-onkey.txt @@ -0,0 +1,26 @@ +Onkey driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The onkey controller is represented as a sub-node of the PMIC node on +the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-onkey". + +Optional properties: +- linux,code: The key-code to be reported when the key is pressed. + Defaults to KEY_POWER. +- maxim,onkey-slide: The system's button is a slide switch, not the default + push button. + +Example: +-------- + + onkey { + compatible = "maxim,max77650-onkey"; + linux,code = <KEY_END>; + maxim,onkey-slide; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index 8de96a4fb2d5..f977ea7617f6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -16,6 +16,7 @@ Required properties: - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a774a1" (RZ/G2M) + - "renesas,intc-ex-r8a774c0" (RZ/G2E) - "renesas,intc-ex-r8a7795" (R-Car H3) - "renesas,intc-ex-r8a7796" (R-Car M3-W) - "renesas,intc-ex-r8a77965" (R-Car M3-N) diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt new file mode 100644 index 000000000000..3a67115cc1da --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt @@ -0,0 +1,57 @@ +LED driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The LED controller is represented as a sub-node of the PMIC node on +the device tree. + +This device has three current sinks. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-led" +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. + +Each LED is represented as a sub-node of the LED-controller node. Up to +three sub-nodes can be defined. + +Required properties of the sub-node: +------------------------------------ + +- reg: Must be <0>, <1> or <2>. + +Optional properties of the sub-node: +------------------------------------ + +- label: See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt + +For more details, please refer to the generic GPIO DT binding document +<devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + leds { + compatible = "maxim,max77650-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "blue:usr0"; + }; + + led@1 { + reg = <1>; + label = "red:usr1"; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + reg = <2>; + label = "green:usr2"; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index 9c16d51cc15b..5a642a51d58e 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -4,7 +4,8 @@ Required properties: ------------------- - compatible: Must be one of "maxim,max77620" - "maxim,max20024". + "maxim,max20024" + "maxim,max77663" - reg: I2C device address. Optional properties: @@ -17,6 +18,11 @@ Optional properties: IRQ numbers for different interrupt source of MAX77620 are defined at dt-bindings/mfd/max77620.h. +- system-power-controller: Indicates that this PMIC is controlling the + system power, see [1] for more details. + +[1] Documentation/devicetree/bindings/power/power-controller.txt + Optional subnodes and their properties: ======================================= @@ -105,6 +111,7 @@ Optional properties: Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. -maxim,power-ok-control: configure map power ok bit 1: Enables POK(Power OK) to control nRST_IO and GPIO1 diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt new file mode 100644 index 000000000000..b529d8d19335 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.txt @@ -0,0 +1,46 @@ +MAX77650 ultra low-power PMIC from Maxim Integrated. + +Required properties: +------------------- +- compatible: Must be "maxim,max77650" +- reg: I2C device address. +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Must be <2>. + +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Must be <2>. The first cell is the pin number and + the second cell is used to specify the gpio active + state. + +Optional properties: +-------------------- +gpio-line-names: Single string containing the name of the GPIO line. + +The GPIO-controller module is represented as part of the top-level PMIC +node. The device exposes a single GPIO line. + +For device-tree bindings of other sub-modules (regulator, power supply, +LEDs and onkey) refer to the binding documents under the respective +sub-system directories. + +For more details on GPIO bindings, please refer to the generic GPIO DT +binding document <devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + }; diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt new file mode 100644 index 000000000000..f0c2f7fcf5c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmfx.txt @@ -0,0 +1,28 @@ +STMicroelectonics Multi-Function eXpander (STMFX) Core bindings + +ST Multi-Function eXpander (STMFX) is a slave controller using I2C for +communication with the main MCU. Its main features are GPIO expansion, main +MCU IDD measurement (IDD is the amount of current that flows through VDD) and +resistive touchscreen controller. + +Required properties: +- compatible: should be "st,stmfx-0300". +- reg: I2C slave address of the device. +- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. + Please refer to ../interrupt-controller/interrupt.txt + +Optional properties: +- drive-open-drain: configure MFX_IRQ_OUT as open drain. +- vdd-supply: phandle of the regulator supplying STMFX. + +Example: + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + }; + +Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt index 24c5cdaba8d2..ca83dcc84fb8 100644 --- a/Documentation/devicetree/bindings/net/davinci_emac.txt +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -20,6 +20,8 @@ Required properties: Optional properties: - phy-handle: See ethernet.txt file in the same directory. If absent, davinci_emac driver defaults to 100/FULL. +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used - ti,davinci-rmii-en: 1 byte, 1 means use RMII - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM? diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index bbcb255c3150..93a7469e70d4 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -12,10 +12,15 @@ Required properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of -port and PHY id, each subnode describing a port needs to have a valid phandle -referencing the internal PHY connected to it. The CPU port of this switch is -always port 0. +described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +mdio-bus each subnode describing a port needs to have a valid phandle +referencing the internal PHY it is connected to. This is because there's no +N:N mapping of port and PHY id. + +Don't use mixed external and internal mdio-bus configurations, as this is +not supported by the hardware. + +The CPU port of this switch is always port 0. A CPU port node has the following optional node: @@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties: - 'full-duplex' (boolean, optional), to indicate that full duplex is used. When absent, half duplex is assumed. -Example: +Examples: +for the external mdio-bus configuration: &mdio0 { phy_port1: phy@0 { @@ -55,12 +61,12 @@ Example: reg = <4>; }; - switch0@0 { + switch@10 { compatible = "qca,qca8337"; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0x10>; ports { #address-cells = <1>; @@ -108,3 +114,56 @@ Example: }; }; }; + +for the internal master mdio-bus configuration: + + &mdio0 { + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = 1000; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "wan"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index cfc376bc977a..a68621580584 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,15 +10,14 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt. the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the "local-mac-address" property; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address; -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in the Devicetree Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: - * "internal" + * "internal" (Internal means there is not a standard bus between the MAC and + the PHY, something proprietary is being used to embed the PHY in the MAC.) * "mii" * "gmii" * "sgmii" diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 174f292d8a3e..8b80515729d7 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -26,6 +26,10 @@ Required properties: Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. +Optional properties: +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used + Optional properties for PHY child node: - reset-gpios : Should specify the gpio for phy reset - magic-packet : If present, indicates that the hardware supports waking diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt new file mode 100644 index 000000000000..c1b4c1819b84 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt @@ -0,0 +1,116 @@ +STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings + +ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. +Please refer to ../mfd/stmfx.txt for STMFX Core bindings. + +Required properties: +- compatible: should be "st,stmfx-0300-pinctrl". +- #gpio-cells: should be <2>, the first cell is the GPIO number and the second + cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>. +- gpio-controller: marks the device as a GPIO controller. +- #interrupt-cells: should be <2>, the first cell is the GPIO number and the + second cell is the interrupt flags in accordance with + <dt-bindings/interrupt-controller/irq.h>. +- interrupt-controller: marks the device as an interrupt controller. +- gpio-ranges: specifies the mapping between gpio controller and pin + controller pins. Check "Concerning gpio-ranges property" below. +Please refer to ../gpio/gpio.txt. + +Please refer to pinctrl-bindings.txt for pin configuration. + +Required properties for pin configuration sub-nodes: +- pins: list of pins to which the configuration applies. + +Optional properties for pin configuration sub-nodes (pinconf-generic ones): +- bias-disable: disable any bias on the pin. +- bias-pull-up: the pin will be pulled up. +- bias-pull-pin-default: use the pin-default pull state. +- bias-pull-down: the pin will be pulled down. +- drive-open-drain: the pin will be driven with open drain. +- drive-push-pull: the pin will be driven actively high and low. +- output-high: the pin will be configured as an output driving high level. +- output-low: the pin will be configured as an output driving low level. + +Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are +called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". + +Concerning gpio-ranges property: +- if all STMFX pins[24:0] are available (no other STMFX function in use), you + should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; +- if agpio[3:0] are not available (STMFX Touchscreen function in use), you + should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; +- if agpio[7:4] are not available (STMFX IDD function in use), you + should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + + +Example: + + stmfx: stmfx@42 { + ... + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + +Example of STMFX GPIO consumers: + + joystick { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + }; + }; + + leds { + compatible = "gpio-leds"; + orange { + gpios = <&stmfx_pinctrl 17 1>; + }; + + blue { + gpios = <&stmfx_pinctrl 19 1>; + }; + } diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt new file mode 100644 index 000000000000..e6d0fb6ff94e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt @@ -0,0 +1,28 @@ +Battery charger driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The charger is represented as a sub-node of the PMIC node on the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-charger" + +Optional properties: +-------------------- +- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one + of: 4000000, 4100000, 4200000, 4300000, + 4400000, 4500000, 4600000, 4700000. +- input-current-limit-microamp: CHGIN input current limit (in microamps). Must + be one of: 95000, 190000, 285000, 380000, + 475000. + +Example: +-------- + + charger { + compatible = "maxim,max77650-charger"; + input-voltage-min-microvolt = <4200000>; + input-current-limit-microamp = <285000>; + }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 742cb470595b..bcfb13194f16 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -16,6 +16,7 @@ Required properties: * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS + * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above - reg: The base address of the UART register bank. diff --git a/Documentation/driver-api/usb/power-management.rst b/Documentation/driver-api/usb/power-management.rst index 79beb807996b..4a74cf6f2797 100644 --- a/Documentation/driver-api/usb/power-management.rst +++ b/Documentation/driver-api/usb/power-management.rst @@ -370,11 +370,15 @@ autosuspend the interface's device. When the usage counter is = 0 then the interface is considered to be idle, and the kernel may autosuspend the device. -Drivers need not be concerned about balancing changes to the usage -counter; the USB core will undo any remaining "get"s when a driver -is unbound from its interface. As a corollary, drivers must not call -any of the ``usb_autopm_*`` functions after their ``disconnect`` -routine has returned. +Drivers must be careful to balance their overall changes to the usage +counter. Unbalanced "get"s will remain in effect when a driver is +unbound from its interface, preventing the device from going into +runtime suspend should the interface be bound to a driver again. On +the other hand, drivers are allowed to achieve this balance by calling +the ``usb_autopm_*`` functions even after their ``disconnect`` routine +has returned -- say from within a work-queue routine -- provided they +retain an active reference to the interface (via ``usb_get_intf`` and +``usb_put_intf``). Drivers using the async routines are responsible for their own synchronization and mutual exclusion. diff --git a/Documentation/filesystems/mount_api.txt b/Documentation/filesystems/mount_api.txt index 944d1965e917..00ff0cfccfa7 100644 --- a/Documentation/filesystems/mount_api.txt +++ b/Documentation/filesystems/mount_api.txt @@ -12,11 +12,13 @@ CONTENTS (4) Filesystem context security. - (5) VFS filesystem context operations. + (5) VFS filesystem context API. - (6) Parameter description. + (6) Superblock creation helpers. - (7) Parameter helper functions. + (7) Parameter description. + + (8) Parameter helper functions. ======== @@ -41,12 +43,15 @@ The creation of new mounts is now to be done in a multistep process: (7) Destroy the context. -To support this, the file_system_type struct gains a new field: +To support this, the file_system_type struct gains two new fields: int (*init_fs_context)(struct fs_context *fc); + const struct fs_parameter_description *parameters; -which is invoked to set up the filesystem-specific parts of a filesystem -context, including the additional space. +The first is invoked to set up the filesystem-specific parts of a filesystem +context, including the additional space, and the second points to the +parameter description for validation at registration time and querying by a +future system call. Note that security initialisation is done *after* the filesystem is called so that the namespaces may be adjusted first. @@ -73,9 +78,9 @@ context. This is represented by the fs_context structure: void *s_fs_info; unsigned int sb_flags; unsigned int sb_flags_mask; + unsigned int s_iflags; + unsigned int lsm_flags; enum fs_context_purpose purpose:8; - bool sloppy:1; - bool silent:1; ... }; @@ -141,6 +146,10 @@ The fs_context fields are as follows: Which bits SB_* flags are to be set/cleared in super_block::s_flags. + (*) unsigned int s_iflags + + These will be bitwise-OR'd with s->s_iflags when a superblock is created. + (*) enum fs_context_purpose This indicates the purpose for which the context is intended. The @@ -150,17 +159,6 @@ The fs_context fields are as follows: FS_CONTEXT_FOR_SUBMOUNT -- New automatic submount of extant mount FS_CONTEXT_FOR_RECONFIGURE -- Change an existing mount - (*) bool sloppy - (*) bool silent - - These are set if the sloppy or silent mount options are given. - - [NOTE] sloppy is probably unnecessary when userspace passes over one - option at a time since the error can just be ignored if userspace deems it - to be unimportant. - - [NOTE] silent is probably redundant with sb_flags & SB_SILENT. - The mount context is created by calling vfs_new_fs_context() or vfs_dup_fs_context() and is destroyed with put_fs_context(). Note that the structure is not refcounted. @@ -342,28 +340,47 @@ number of operations used by the new mount code for this purpose: It should return 0 on success or a negative error code on failure. -================================= -VFS FILESYSTEM CONTEXT OPERATIONS -================================= +========================== +VFS FILESYSTEM CONTEXT API +========================== -There are four operations for creating a filesystem context and -one for destroying a context: +There are four operations for creating a filesystem context and one for +destroying a context: - (*) struct fs_context *vfs_new_fs_context(struct file_system_type *fs_type, - struct dentry *reference, - unsigned int sb_flags, - unsigned int sb_flags_mask, - enum fs_context_purpose purpose); + (*) struct fs_context *fs_context_for_mount( + struct file_system_type *fs_type, + unsigned int sb_flags); - Create a filesystem context for a given filesystem type and purpose. This - allocates the filesystem context, sets the superblock flags, initialises - the security and calls fs_type->init_fs_context() to initialise the - filesystem private data. + Allocate a filesystem context for the purpose of setting up a new mount, + whether that be with a new superblock or sharing an existing one. This + sets the superblock flags, initialises the security and calls + fs_type->init_fs_context() to initialise the filesystem private data. - reference can be NULL or it may indicate the root dentry of a superblock - that is going to be reconfigured (FS_CONTEXT_FOR_RECONFIGURE) or - the automount point that triggered a submount (FS_CONTEXT_FOR_SUBMOUNT). - This is provided as a source of namespace information. + fs_type specifies the filesystem type that will manage the context and + sb_flags presets the superblock flags stored therein. + + (*) struct fs_context *fs_context_for_reconfigure( + struct dentry *dentry, + unsigned int sb_flags, + unsigned int sb_flags_mask); + + Allocate a filesystem context for the purpose of reconfiguring an + existing superblock. dentry provides a reference to the superblock to be + configured. sb_flags and sb_flags_mask indicate which superblock flags + need changing and to what. + + (*) struct fs_context *fs_context_for_submount( + struct file_system_type *fs_type, + struct dentry *reference); + + Allocate a filesystem context for the purpose of creating a new mount for + an automount point or other derived superblock. fs_type specifies the + filesystem type that will manage the context and the reference dentry + supplies the parameters. Namespaces are propagated from the reference + dentry's superblock also. + + Note that it's not a requirement that the reference dentry be of the same + filesystem type as fs_type. (*) struct fs_context *vfs_dup_fs_context(struct fs_context *src_fc); @@ -390,20 +407,6 @@ context pointer or a negative error code. For the remaining operations, if an error occurs, a negative error code will be returned. - (*) int vfs_get_tree(struct fs_context *fc); - - Get or create the mountable root and superblock, using the parameters in - the filesystem context to select/configure the superblock. This invokes - the ->validate() op and then the ->get_tree() op. - - [NOTE] ->validate() could perhaps be rolled into ->get_tree() and - ->reconfigure(). - - (*) struct vfsmount *vfs_create_mount(struct fs_context *fc); - - Create a mount given the parameters in the specified filesystem context. - Note that this does not attach the mount to anything. - (*) int vfs_parse_fs_param(struct fs_context *fc, struct fs_parameter *param); @@ -432,17 +435,80 @@ returned. clear the pointer, but then becomes responsible for disposing of the object. - (*) int vfs_parse_fs_string(struct fs_context *fc, char *key, + (*) int vfs_parse_fs_string(struct fs_context *fc, const char *key, const char *value, size_t v_size); - A wrapper around vfs_parse_fs_param() that just passes a constant string. + A wrapper around vfs_parse_fs_param() that copies the value string it is + passed. (*) int generic_parse_monolithic(struct fs_context *fc, void *data); Parse a sys_mount() data page, assuming the form to be a text list consisting of key[=val] options separated by commas. Each item in the list is passed to vfs_mount_option(). This is the default when the - ->parse_monolithic() operation is NULL. + ->parse_monolithic() method is NULL. + + (*) int vfs_get_tree(struct fs_context *fc); + + Get or create the mountable root and superblock, using the parameters in + the filesystem context to select/configure the superblock. This invokes + the ->get_tree() method. + + (*) struct vfsmount *vfs_create_mount(struct fs_context *fc); + + Create a mount given the parameters in the specified filesystem context. + Note that this does not attach the mount to anything. + + +=========================== +SUPERBLOCK CREATION HELPERS +=========================== + +A number of VFS helpers are available for use by filesystems for the creation +or looking up of superblocks. + + (*) struct super_block * + sget_fc(struct fs_context *fc, + int (*test)(struct super_block *sb, struct fs_context *fc), + int (*set)(struct super_block *sb, struct fs_context *fc)); + + This is the core routine. If test is non-NULL, it searches for an + existing superblock matching the criteria held in the fs_context, using + the test function to match them. If no match is found, a new superblock + is created and the set function is called to set it up. + + Prior to the set function being called, fc->s_fs_info will be transferred + to sb->s_fs_info - and fc->s_fs_info will be cleared if set returns + success (ie. 0). + +The following helpers all wrap sget_fc(): + + (*) int vfs_get_super(struct fs_context *fc, + enum vfs_get_super_keying keying, + int (*fill_super)(struct super_block *sb, + struct fs_context *fc)) + + This creates/looks up a deviceless superblock. The keying indicates how + many superblocks of this type may exist and in what manner they may be + shared: + + (1) vfs_get_single_super + + Only one such superblock may exist in the system. Any further + attempt to get a new superblock gets this one (and any parameter + differences are ignored). + + (2) vfs_get_keyed_super + + Multiple superblocks of this type may exist and they're keyed on + their s_fs_info pointer (for example this may refer to a + namespace). + + (3) vfs_get_independent_super + + Multiple independent superblocks of this type may exist. This + function never matches an existing one and always creates a new + one. ===================== @@ -454,35 +520,22 @@ There's a core description struct that links everything together: struct fs_parameter_description { const char name[16]; - u8 nr_params; - u8 nr_alt_keys; - u8 nr_enums; - bool ignore_unknown; - bool no_source; - const char *const *keys; - const struct constant_table *alt_keys; const struct fs_parameter_spec *specs; const struct fs_parameter_enum *enums; }; For example: - enum afs_param { + enum { Opt_autocell, Opt_bar, Opt_dyn, Opt_foo, Opt_source, - nr__afs_params }; static const struct fs_parameter_description afs_fs_parameters = { .name = "kAFS", - .nr_params = nr__afs_params, - .nr_alt_keys = ARRAY_SIZE(afs_param_alt_keys), - .nr_enums = ARRAY_SIZE(afs_param_enums), - .keys = afs_param_keys, - .alt_keys = afs_param_alt_keys, .specs = afs_param_specs, .enums = afs_param_enums, }; @@ -494,28 +547,24 @@ The members are as follows: The name to be used in error messages generated by the parse helper functions. - (2) u8 nr_params; - - The number of discrete parameter identifiers. This indicates the number - of elements in the ->types[] array and also limits the values that may be - used in the values that the ->keys[] array maps to. - - It is expected that, for example, two parameters that are related, say - "acl" and "noacl" with have the same ID, but will be flagged to indicate - that one is the inverse of the other. The value can then be picked out - from the parse result. + (2) const struct fs_parameter_specification *specs; - (3) const struct fs_parameter_specification *specs; + Table of parameter specifications, terminated with a null entry, where the + entries are of type: - Table of parameter specifications, where the entries are of type: - - struct fs_parameter_type { - enum fs_parameter_spec type:8; - u8 flags; + struct fs_parameter_spec { + const char *name; + u8 opt; + enum fs_parameter_type type:8; + unsigned short flags; }; - and the parameter identifier is the index to the array. 'type' indicates - the desired value type and must be one of: + The 'name' field is a string to match exactly to the parameter key (no + wildcards, patterns and no case-independence) and 'opt' is the value that + will be returned by the fs_parser() function in the case of a successful + match. + + The 'type' field indicates the desired value type and must be one of: TYPE NAME EXPECTED VALUE RESULT IN ======================= ======================= ===================== @@ -525,85 +574,65 @@ The members are as follows: fs_param_is_u32_octal 32-bit octal int result->uint_32 fs_param_is_u32_hex 32-bit hex int result->uint_32 fs_param_is_s32 32-bit signed int result->int_32 + fs_param_is_u64 64-bit unsigned int result->uint_64 fs_param_is_enum Enum value name result->uint_32 fs_param_is_string Arbitrary string param->string fs_param_is_blob Binary blob param->blob fs_param_is_blockdev Blockdev path * Needs lookup fs_param_is_path Path * Needs lookup - fs_param_is_fd File descriptor param->file - - And each parameter can be qualified with 'flags': - - fs_param_v_optional The value is optional - fs_param_neg_with_no If key name is prefixed with "no", it is false - fs_param_neg_with_empty If value is "", it is false - fs_param_deprecated The parameter is deprecated. - - For example: - - static const struct fs_parameter_spec afs_param_specs[nr__afs_params] = { - [Opt_autocell] = { fs_param_is flag }, - [Opt_bar] = { fs_param_is_enum }, - [Opt_dyn] = { fs_param_is flag }, - [Opt_foo] = { fs_param_is_bool, fs_param_neg_with_no }, - [Opt_source] = { fs_param_is_string }, - }; + fs_param_is_fd File descriptor result->int_32 Note that if the value is of fs_param_is_bool type, fs_parse() will try to match any string value against "0", "1", "no", "yes", "false", "true". - [!] NOTE that the table must be sorted according to primary key name so - that ->keys[] is also sorted. - - (4) const char *const *keys; - - Table of primary key names for the parameters. There must be one entry - per defined parameter. The table is optional if ->nr_params is 0. The - table is just an array of names e.g.: + Each parameter can also be qualified with 'flags': - static const char *const afs_param_keys[nr__afs_params] = { - [Opt_autocell] = "autocell", - [Opt_bar] = "bar", - [Opt_dyn] = "dyn", - [Opt_foo] = "foo", - [Opt_source] = "source", - }; - - [!] NOTE that the table must be sorted such that the table can be searched - with bsearch() using strcmp(). This means that the Opt_* values must - correspond to the entries in this table. - - (5) const struct constant_table *alt_keys; - u8 nr_alt_keys; - - Table of additional key names and their mappings to parameter ID plus the - number of elements in the table. This is optional. The table is just an - array of { name, integer } pairs, e.g.: + fs_param_v_optional The value is optional + fs_param_neg_with_no result->negated set if key is prefixed with "no" + fs_param_neg_with_empty result->negated set if value is "" + fs_param_deprecated The parameter is deprecated. - static const struct constant_table afs_param_keys[] = { - { "baz", Opt_bar }, - { "dynamic", Opt_dyn }, + These are wrapped with a number of convenience wrappers: + + MACRO SPECIFIES + ======================= =============================================== + fsparam_flag() fs_param_is_flag + fsparam_flag_no() fs_param_is_flag, fs_param_neg_with_no + fsparam_bool() fs_param_is_bool + fsparam_u32() fs_param_is_u32 + fsparam_u32oct() fs_param_is_u32_octal + fsparam_u32hex() fs_param_is_u32_hex + fsparam_s32() fs_param_is_s32 + fsparam_u64() fs_param_is_u64 + fsparam_enum() fs_param_is_enum + fsparam_string() fs_param_is_string + fsparam_blob() fs_param_is_blob + fsparam_bdev() fs_param_is_blockdev + fsparam_path() fs_param_is_path + fsparam_fd() fs_param_is_fd + + all of which take two arguments, name string and option number - for + example: + + static const struct fs_parameter_spec afs_param_specs[] = { + fsparam_flag ("autocell", Opt_autocell), + fsparam_flag ("dyn", Opt_dyn), + fsparam_string ("source", Opt_source), + fsparam_flag_no ("foo", Opt_foo), + {} }; - [!] NOTE that the table must be sorted such that strcmp() can be used with - bsearch() to search the entries. - - The parameter ID can also be fs_param_key_removed to indicate that a - deprecated parameter has been removed and that an error will be given. - This differs from fs_param_deprecated where the parameter may still have - an effect. - - Further, the behaviour of the parameter may differ when an alternate name - is used (for instance with NFS, "v3", "v4.2", etc. are alternate names). + An addition macro, __fsparam() is provided that takes an additional pair + of arguments to specify the type and the flags for anything that doesn't + match one of the above macros. (6) const struct fs_parameter_enum *enums; - u8 nr_enums; - Table of enum value names to integer mappings and the number of elements - stored therein. This is of type: + Table of enum value names to integer mappings, terminated with a null + entry. This is of type: struct fs_parameter_enum { - u8 param_id; + u8 opt; char name[14]; u8 value; }; @@ -621,11 +650,6 @@ The members are as follows: try to look the value up in the enum table and the result will be stored in the parse result. - (7) bool no_source; - - If this is set, fs_parse() will ignore any "source" parameter and not - pass it to the filesystem. - The parser should be pointed to by the parser pointer in the file_system_type struct as this will provide validation on registration (if CONFIG_VALIDATE_FS_PARSER=y) and will allow the description to be queried from @@ -650,9 +674,8 @@ process the parameters it is given. int value; }; - and it must be sorted such that it can be searched using bsearch() using - strcmp(). If a match is found, the corresponding value is returned. If a - match isn't found, the not_found value is returned instead. + If a match is found, the corresponding value is returned. If a match + isn't found, the not_found value is returned instead. (*) bool validate_constant_table(const struct constant_table *tbl, size_t tbl_size, @@ -665,36 +688,36 @@ process the parameters it is given. should just be set to lie inside the low-to-high range. If all is good, true is returned. If the table is invalid, errors are - logged to dmesg, the stack is dumped and false is returned. + logged to dmesg and false is returned. + + (*) bool fs_validate_description(const struct fs_parameter_description *desc); + + This performs some validation checks on a parameter description. It + returns true if the description is good and false if it is not. It will + log errors to dmesg if validation fails. (*) int fs_parse(struct fs_context *fc, - const struct fs_param_parser *parser, + const struct fs_parameter_description *desc, struct fs_parameter *param, - struct fs_param_parse_result *result); + struct fs_parse_result *result); This is the main interpreter of parameters. It uses the parameter - description (parser) to look up the name of the parameter to use and to - convert that to a parameter ID (stored in result->key). + description to look up a parameter by key name and to convert that to an + option number (which it returns). If successful, and if the parameter type indicates the result is a boolean, integer or enum type, the value is converted by this function and - the result stored in result->{boolean,int_32,uint_32}. + the result stored in result->{boolean,int_32,uint_32,uint_64}. If a match isn't initially made, the key is prefixed with "no" and no value is present then an attempt will be made to look up the key with the prefix removed. If this matches a parameter for which the type has flag - fs_param_neg_with_no set, then a match will be made and the value will be - set to false/0/NULL. - - If the parameter is successfully matched and, optionally, parsed - correctly, 1 is returned. If the parameter isn't matched and - parser->ignore_unknown is set, then 0 is returned. Otherwise -EINVAL is - returned. - - (*) bool fs_validate_description(const struct fs_parameter_description *desc); + fs_param_neg_with_no set, then a match will be made and result->negated + will be set to true. - This is validates the parameter description. It returns true if the - description is good and false if it is not. + If the parameter isn't matched, -ENOPARAM will be returned; if the + parameter is matched, but the value is erroneous, -EINVAL will be + returned; otherwise the parameter's option number will be returned. (*) int fs_lookup_param(struct fs_context *fc, struct fs_parameter *value, diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index d1ee484a787d..ee9984f35868 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -36,6 +36,7 @@ Supported adapters: * Intel Cannon Lake (PCH) * Intel Cedar Fork (PCH) * Intel Ice Lake (PCH) + * Intel Comet Lake (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/lzo.txt b/Documentation/lzo.txt index f79934225d8d..ca983328976b 100644 --- a/Documentation/lzo.txt +++ b/Documentation/lzo.txt @@ -102,9 +102,11 @@ Byte sequences dictionary which is empty, and that it will always be invalid at this place. - 17 : bitstream version. If the first byte is 17, the next byte - gives the bitstream version (version 1 only). If the first byte - is not 17, the bitstream version is 0. + 17 : bitstream version. If the first byte is 17, and compressed + stream length is at least 5 bytes (length of shortest possible + versioned bitstream), the next byte gives the bitstream version + (version 1 only). + Otherwise, the bitstream version is 0. 18..21 : copy 0..3 literals state = (byte - 17) = 0..3 [ copy <state> literals ] diff --git a/Documentation/media/uapi/rc/rc-tables.rst b/Documentation/media/uapi/rc/rc-tables.rst index f460031d8531..177ac44fa0fa 100644 --- a/Documentation/media/uapi/rc/rc-tables.rst +++ b/Documentation/media/uapi/rc/rc-tables.rst @@ -623,7 +623,7 @@ the remote via /dev/input/event devices. - .. row 78 - - ``KEY_SCREEN`` + - ``KEY_ASPECT_RATIO`` - Select screen aspect ratio @@ -631,7 +631,7 @@ the remote via /dev/input/event devices. - .. row 79 - - ``KEY_ZOOM`` + - ``KEY_FULL_SCREEN`` - Put device into zoom/full screen mode diff --git a/Documentation/networking/bpf_flow_dissector.rst b/Documentation/networking/bpf_flow_dissector.rst new file mode 100644 index 000000000000..b375ae2ec2c4 --- /dev/null +++ b/Documentation/networking/bpf_flow_dissector.rst @@ -0,0 +1,126 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +BPF Flow Dissector +================== + +Overview +======== + +Flow dissector is a routine that parses metadata out of the packets. It's +used in the various places in the networking subsystem (RFS, flow hash, etc). + +BPF flow dissector is an attempt to reimplement C-based flow dissector logic +in BPF to gain all the benefits of BPF verifier (namely, limits on the +number of instructions and tail calls). + +API +=== + +BPF flow dissector programs operate on an ``__sk_buff``. However, only the +limited set of fields is allowed: ``data``, ``data_end`` and ``flow_keys``. +``flow_keys`` is ``struct bpf_flow_keys`` and contains flow dissector input +and output arguments. + +The inputs are: + * ``nhoff`` - initial offset of the networking header + * ``thoff`` - initial offset of the transport header, initialized to nhoff + * ``n_proto`` - L3 protocol type, parsed out of L2 header + +Flow dissector BPF program should fill out the rest of the ``struct +bpf_flow_keys`` fields. Input arguments ``nhoff/thoff/n_proto`` should be +also adjusted accordingly. + +The return code of the BPF program is either BPF_OK to indicate successful +dissection, or BPF_DROP to indicate parsing error. + +__sk_buff->data +=============== + +In the VLAN-less case, this is what the initial state of the BPF flow +dissector looks like:: + + +------+------+------------+-----------+ + | DMAC | SMAC | ETHER_TYPE | L3_HEADER | + +------+------+------------+-----------+ + ^ + | + +-- flow dissector starts here + + +.. code:: c + + skb->data + flow_keys->nhoff point to the first byte of L3_HEADER + flow_keys->thoff = nhoff + flow_keys->n_proto = ETHER_TYPE + +In case of VLAN, flow dissector can be called with the two different states. + +Pre-VLAN parsing:: + + +------+------+------+-----+-----------+-----------+ + | DMAC | SMAC | TPID | TCI |ETHER_TYPE | L3_HEADER | + +------+------+------+-----+-----------+-----------+ + ^ + | + +-- flow dissector starts here + +.. code:: c + + skb->data + flow_keys->nhoff point the to first byte of TCI + flow_keys->thoff = nhoff + flow_keys->n_proto = TPID + +Please note that TPID can be 802.1AD and, hence, BPF program would +have to parse VLAN information twice for double tagged packets. + + +Post-VLAN parsing:: + + +------+------+------+-----+-----------+-----------+ + | DMAC | SMAC | TPID | TCI |ETHER_TYPE | L3_HEADER | + +------+------+------+-----+-----------+-----------+ + ^ + | + +-- flow dissector starts here + +.. code:: c + + skb->data + flow_keys->nhoff point the to first byte of L3_HEADER + flow_keys->thoff = nhoff + flow_keys->n_proto = ETHER_TYPE + +In this case VLAN information has been processed before the flow dissector +and BPF flow dissector is not required to handle it. + + +The takeaway here is as follows: BPF flow dissector program can be called with +the optional VLAN header and should gracefully handle both cases: when single +or double VLAN is present and when it is not present. The same program +can be called for both cases and would have to be written carefully to +handle both cases. + + +Reference Implementation +======================== + +See ``tools/testing/selftests/bpf/progs/bpf_flow.c`` for the reference +implementation and ``tools/testing/selftests/bpf/flow_dissector_load.[hc]`` +for the loader. bpftool can be used to load BPF flow dissector program as well. + +The reference implementation is organized as follows: + * ``jmp_table`` map that contains sub-programs for each supported L3 protocol + * ``_dissect`` routine - entry point; it does input ``n_proto`` parsing and + does ``bpf_tail_call`` to the appropriate L3 handler + +Since BPF at this point doesn't support looping (or any jumping back), +jmp_table is used instead to handle multiple levels of encapsulation (and +IPv6 options). + + +Current Limitations +=================== +BPF flow dissector doesn't support exporting all the metadata that in-kernel +C-based implementation can export. Notable example is single VLAN (802.1Q) +and double VLAN (802.1AD) tags. Please refer to the ``struct bpf_flow_keys`` +for a set of information that's currently can be exported from the BPF context. diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt index e12a4900cf72..d192f8b9948b 100644 --- a/Documentation/networking/decnet.txt +++ b/Documentation/networking/decnet.txt @@ -22,8 +22,6 @@ you'll need the following options as well... CONFIG_DECNET_ROUTER (to be able to add/delete routes) CONFIG_NETFILTER (will be required for the DECnet routing daemon) - CONFIG_DECNET_ROUTE_FWMARK is optional - Don't turn on SIOCGIFCONF support for DECnet unless you are really sure that you need it, in general you won't and it can cause ifconfig to malfunction. diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 5449149be496..984e68f9e026 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -9,6 +9,7 @@ Contents: netdev-FAQ af_xdp batman-adv + bpf_flow_dissector can can_ucan_protocol device_drivers/freescale/dpaa2/index diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index acdfb5d2bcaa..c4ac35234f05 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -422,6 +422,7 @@ tcp_min_rtt_wlen - INTEGER minimum RTT when it is moved to a longer path (e.g., due to traffic engineering). A longer window makes the filter more resistant to RTT inflations such as transient congestion. The unit is seconds. + Possible values: 0 - 86400 (1 day) Default: 300 tcp_moderate_rcvbuf - BOOLEAN @@ -1336,6 +1337,7 @@ tag - INTEGER Default value is 0. xfrm4_gc_thresh - INTEGER + (Obsolete since linux-4.14) The threshold at which we will start garbage collecting for IPv4 destination cache entries. At twice this value the system will refuse new allocations. @@ -1919,6 +1921,7 @@ echo_ignore_all - BOOLEAN Default: 0 xfrm6_gc_thresh - INTEGER + (Obsolete since linux-4.14) The threshold at which we will start garbage collecting for IPv6 destination cache entries. At twice this value the system will refuse new allocations. diff --git a/Documentation/networking/msg_zerocopy.rst b/Documentation/networking/msg_zerocopy.rst index 18c1415e7bfa..ace56204dd03 100644 --- a/Documentation/networking/msg_zerocopy.rst +++ b/Documentation/networking/msg_zerocopy.rst @@ -50,7 +50,7 @@ the excellent reporting over at LWN.net or read the original code. patchset [PATCH net-next v4 0/9] socket sendmsg MSG_ZEROCOPY - http://lkml.kernel.org/r/20170803202945.70750-1-willemdebruijn.kernel@gmail.com + https://lkml.kernel.org/netdev/20170803202945.70750-1-willemdebruijn.kernel@gmail.com Interface diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst index 0ac5fa77f501..642fa963be3c 100644 --- a/Documentation/networking/netdev-FAQ.rst +++ b/Documentation/networking/netdev-FAQ.rst @@ -131,6 +131,19 @@ it to the maintainer to figure out what is the most recent and current version that should be applied. If there is any doubt, the maintainer will reply and ask what should be done. +Q: I made changes to only a few patches in a patch series should I resend only those changed? +--------------------------------------------------------------------------------------------- +A: No, please resend the entire patch series and make sure you do number your +patches such that it is clear this is the latest and greatest set of patches +that can be applied. + +Q: I submitted multiple versions of a patch series and it looks like a version other than the last one has been accepted, what should I do? +------------------------------------------------------------------------------------------------------------------------------------------- +A: There is no revert possible, once it is pushed out, it stays like that. +Please send incremental versions on top of what has been merged in order to fix +the patches the way they would look like if your latest patch series was to be +merged. + Q: How can I tell what patches are queued up for backporting to the various stable releases? -------------------------------------------------------------------------------------------- A: Normally Greg Kroah-Hartman collects stable commits himself, but for diff --git a/Documentation/networking/nf_flowtable.txt b/Documentation/networking/nf_flowtable.txt index 54128c50d508..ca2136c76042 100644 --- a/Documentation/networking/nf_flowtable.txt +++ b/Documentation/networking/nf_flowtable.txt @@ -44,10 +44,10 @@ including the Netfilter hooks and the flowtable fastpath bypass. / \ / \ |Routing | / \ --> ingress ---> prerouting ---> |decision| | postrouting |--> neigh_xmit \_________/ \__________/ ---------- \____________/ ^ - | ^ | | ^ | - flowtable | | ____\/___ | | - | | | / \ | | - __\/___ | --------->| forward |------------ | + | ^ | ^ | + flowtable | ____\/___ | | + | | / \ | | + __\/___ | | forward |------------ | |-----| | \_________/ | |-----| | 'flow offload' rule | |-----| | adds entry to | diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 2df5894353d6..cd7303d7fa25 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -1009,16 +1009,18 @@ The kernel interface functions are as follows: (*) Check call still alive. - u32 rxrpc_kernel_check_life(struct socket *sock, - struct rxrpc_call *call); + bool rxrpc_kernel_check_life(struct socket *sock, + struct rxrpc_call *call, + u32 *_life); void rxrpc_kernel_probe_life(struct socket *sock, struct rxrpc_call *call); - The first function returns a number that is updated when ACKs are received - from the peer (notably including PING RESPONSE ACKs which we can elicit by - sending PING ACKs to see if the call still exists on the server). The - caller should compare the numbers of two calls to see if the call is still - alive after waiting for a suitable interval. + The first function passes back in *_life a number that is updated when + ACKs are received from the peer (notably including PING RESPONSE ACKs + which we can elicit by sending PING ACKs to see if the call still exists + on the server). The caller should compare the numbers of two calls to see + if the call is still alive after waiting for a suitable interval. It also + returns true as long as the call hasn't yet reached the completed state. This allows the caller to work out if the server is still contactable and if the call is still alive on the server while waiting for the server to diff --git a/Documentation/networking/snmp_counter.rst b/Documentation/networking/snmp_counter.rst index 52b026be028f..38a4edc4522b 100644 --- a/Documentation/networking/snmp_counter.rst +++ b/Documentation/networking/snmp_counter.rst @@ -413,7 +413,7 @@ algorithm. .. _F-RTO: https://tools.ietf.org/html/rfc5682 TCP Fast Path -============ +============= When kernel receives a TCP packet, it has two paths to handler the packet, one is fast path, another is slow path. The comment in kernel code provides a good explanation of them, I pasted them below:: @@ -681,6 +681,7 @@ The TCP stack receives an out of order duplicate packet, so it sends a DSACK to the sender. * TcpExtTCPDSACKRecv + The TCP stack receives a DSACK, which indicates an acknowledged duplicate packet is received. @@ -690,7 +691,7 @@ The TCP stack receives a DSACK, which indicate an out of order duplicate packet is received. invalid SACK and DSACK -==================== +====================== When a SACK (or DSACK) block is invalid, a corresponding counter would be updated. The validation method is base on the start/end sequence number of the SACK block. For more details, please refer the comment @@ -704,11 +705,13 @@ explaination: .. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32 * TcpExtTCPSACKDiscard + This counter indicates how many SACK blocks are invalid. If the invalid SACK block is caused by ACK recording, the TCP stack will only ignore it and won't update this counter. * TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo + When a DSACK block is invalid, one of these two counters would be updated. Which counter will be updated depends on the undo_marker flag of the TCP socket. If the undo_marker is not set, the TCP stack isn't @@ -719,7 +722,7 @@ will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld will be updated. As implied in its name, it might be an old packet. SACK shift -========= +========== The linux networking stack stores data in sk_buff struct (skb for short). If a SACK block acrosses multiple skb, the TCP stack will try to re-arrange data in these skb. E.g. if a SACK block acknowledges seq @@ -730,12 +733,15 @@ seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be discard, this operation is 'merge'. * TcpExtTCPSackShifted + A skb is shifted * TcpExtTCPSackMerged + A skb is merged * TcpExtTCPSackShiftFallback + A skb should be shifted or merged, but the TCP stack doesn't do it for some reasons. diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 6af24cdb25cc..3f13d8599337 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -866,14 +866,14 @@ The intent is that compaction has less work to do in the future and to increase the success rate of future high-order allocations such as SLUB allocations, THP and hugetlbfs pages. -To make it sensible with respect to the watermark_scale_factor parameter, -the unit is in fractions of 10,000. The default value of 15,000 means -that up to 150% of the high watermark will be reclaimed in the event of -a pageblock being mixed due to fragmentation. The level of reclaim is -determined by the number of fragmentation events that occurred in the -recent past. If this value is smaller than a pageblock then a pageblocks -worth of pages will be reclaimed (e.g. 2MB on 64-bit x86). A boost factor -of 0 will disable the feature. +To make it sensible with respect to the watermark_scale_factor +parameter, the unit is in fractions of 10,000. The default value of +15,000 on !DISCONTIGMEM configurations means that up to 150% of the high +watermark will be reclaimed in the event of a pageblock being mixed due +to fragmentation. The level of reclaim is determined by the number of +fragmentation events that occurred in the recent past. If this value is +smaller than a pageblock then a pageblocks worth of pages will be reclaimed +(e.g. 2MB on 64-bit x86). A boost factor of 0 will disable the feature. ============================================================= diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 7de9eee73fcd..64b38dfcc243 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -5,25 +5,32 @@ The Definitive KVM (Kernel-based Virtual Machine) API Documentation ---------------------- The kvm API is a set of ioctls that are issued to control various aspects -of a virtual machine. The ioctls belong to three classes +of a virtual machine. The ioctls belong to three classes: - System ioctls: These query and set global attributes which affect the whole kvm subsystem. In addition a system ioctl is used to create - virtual machines + virtual machines. - VM ioctls: These query and set attributes that affect an entire virtual machine, for example memory layout. In addition a VM ioctl is used to - create virtual cpus (vcpus). + create virtual cpus (vcpus) and devices. - Only run VM ioctls from the same process (address space) that was used - to create the VM. + VM ioctls must be issued from the same process (address space) that was + used to create the VM. - vcpu ioctls: These query and set attributes that control the operation of a single virtual cpu. - Only run vcpu ioctls from the same thread that was used to create the - vcpu. + vcpu ioctls should be issued from the same thread that was used to create + the vcpu, except for asynchronous vcpu ioctl that are marked as such in + the documentation. Otherwise, the first ioctl after switching threads + could see a performance impact. + - device ioctls: These query and set attributes that control the operation + of a single device. + + device ioctls must be issued from the same process (address space) that + was used to create the VM. 2. File descriptors ------------------- @@ -32,17 +39,34 @@ The kvm API is centered around file descriptors. An initial open("/dev/kvm") obtains a handle to the kvm subsystem; this handle can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this handle will create a VM file descriptor which can be used to issue VM -ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu -and return a file descriptor pointing to it. Finally, ioctls on a vcpu -fd can be used to control the vcpu, including the important task of -actually running guest code. +ioctls. A KVM_CREATE_VCPU or KVM_CREATE_DEVICE ioctl on a VM fd will +create a virtual cpu or device and return a file descriptor pointing to +the new resource. Finally, ioctls on a vcpu or device fd can be used +to control the vcpu or device. For vcpus, this includes the important +task of actually running guest code. In general file descriptors can be migrated among processes by means of fork() and the SCM_RIGHTS facility of unix domain socket. These kinds of tricks are explicitly not supported by kvm. While they will not cause harm to the host, their actual behavior is not guaranteed by -the API. The only supported use is one virtual machine per process, -and one vcpu per thread. +the API. See "General description" for details on the ioctl usage +model that is supported by KVM. + +It is important to note that althought VM ioctls may only be issued from +the process that created the VM, a VM's lifecycle is associated with its +file descriptor, not its creator (process). In other words, the VM and +its resources, *including the associated address space*, are not freed +until the last reference to the VM's file descriptor has been released. +For example, if fork() is issued after ioctl(KVM_CREATE_VM), the VM will +not be freed until both the parent (original) process and its child have +put their references to the VM's file descriptor. + +Because a VM's resources are not freed until the last reference to its +file descriptor is released, creating additional references to a VM via +via fork(), dup(), etc... without careful consideration is strongly +discouraged and may have unwanted side effects, e.g. memory allocated +by and on behalf of the VM's process may not be freed/unaccounted when +the VM is shut down. It is important to note that althought VM ioctls may only be issued from @@ -297,7 +321,7 @@ cpu's hardware control block. 4.8 KVM_GET_DIRTY_LOG (vm ioctl) Capability: basic -Architectures: x86 +Architectures: all Type: vm ioctl Parameters: struct kvm_dirty_log (in/out) Returns: 0 on success, -1 on error @@ -515,11 +539,15 @@ c) KVM_INTERRUPT_SET_LEVEL Note that any value for 'irq' other than the ones stated above is invalid and incurs unexpected behavior. +This is an asynchronous vcpu ioctl and can be invoked from any thread. + MIPS: Queues an external interrupt to be injected into the virtual CPU. A negative interrupt number dequeues the interrupt. +This is an asynchronous vcpu ioctl and can be invoked from any thread. + 4.17 KVM_DEBUG_GUEST @@ -1086,14 +1114,12 @@ struct kvm_userspace_memory_region { #define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) #define KVM_MEM_READONLY (1UL << 1) -This ioctl allows the user to create or modify a guest physical memory -slot. When changing an existing slot, it may be moved in the guest -physical memory space, or its flags may be modified. It may not be -resized. Slots may not overlap in guest physical address space. -Bits 0-15 of "slot" specifies the slot id and this value should be -less than the maximum number of user memory slots supported per VM. -The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS, -if this capability is supported by the architecture. +This ioctl allows the user to create, modify or delete a guest physical +memory slot. Bits 0-15 of "slot" specify the slot id and this value +should be less than the maximum number of user memory slots supported per +VM. The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS, +if this capability is supported by the architecture. Slots may not +overlap in guest physical address space. If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot" specifies the address space which is being modified. They must be @@ -1102,6 +1128,10 @@ KVM_CAP_MULTI_ADDRESS_SPACE capability. Slots in separate address spaces are unrelated; the restriction on overlapping slots only applies within each address space. +Deleting a slot is done by passing zero for memory_size. When changing +an existing slot, it may be moved in the guest physical memory space, +or its flags may be modified, but it may not be resized. + Memory for the region is taken starting at the address denoted by the field userspace_addr, which must point at user addressable memory for the entire memory slot size. Any object may back this memory, including @@ -2493,7 +2523,7 @@ KVM_S390_MCHK (vm, vcpu) - machine check interrupt; cr 14 bits in parm, machine checks needing further payload are not supported by this ioctl) -Note that the vcpu ioctl is asynchronous to vcpu execution. +This is an asynchronous vcpu ioctl and can be invoked from any thread. 4.78 KVM_PPC_GET_HTAB_FD @@ -3042,8 +3072,7 @@ KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall KVM_S390_MCHK - machine check interrupt; parameters in .mchk - -Note that the vcpu ioctl is asynchronous to vcpu execution. +This is an asynchronous vcpu ioctl and can be invoked from any thread. 4.94 KVM_S390_GET_IRQ_STATE @@ -3781,7 +3810,7 @@ to I/O ports. 4.117 KVM_CLEAR_DIRTY_LOG (vm ioctl) Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT -Architectures: x86 +Architectures: x86, arm, arm64, mips Type: vm ioctl Parameters: struct kvm_dirty_log (in) Returns: 0 on success, -1 on error @@ -3801,8 +3830,9 @@ The ioctl clears the dirty status of pages in a memory slot, according to the bitmap that is passed in struct kvm_clear_dirty_log's dirty_bitmap field. Bit 0 of the bitmap corresponds to page "first_page" in the memory slot, and num_pages is the size in bits of the input bitmap. -Both first_page and num_pages must be a multiple of 64. For each bit -that is set in the input bitmap, the corresponding page is marked "clean" +first_page must be a multiple of 64; num_pages must also be a multiple of +64 unless first_page + num_pages is the size of the memory slot. For each +bit that is set in the input bitmap, the corresponding page is marked "clean" in KVM's dirty bitmap, and dirty tracking is re-enabled for that page (for example via write-protection, or by clearing the dirty bit in a page table entry). @@ -4770,7 +4800,7 @@ and injected exceptions. 7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT -Architectures: all +Architectures: x86, arm, arm64, mips Parameters: args[0] whether feature should be enabled or not With this capability enabled, KVM_GET_DIRTY_LOG will not automatically diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index f365102c80f5..2efe0efc516e 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -142,7 +142,7 @@ Shadow pages contain the following information: If clear, this page corresponds to a guest page table denoted by the gfn field. role.quadrant: - When role.cr4_pae=0, the guest uses 32-bit gptes while the host uses 64-bit + When role.gpte_is_8_bytes=0, the guest uses 32-bit gptes while the host uses 64-bit sptes. That means a guest page table contains more ptes than the host, so multiple shadow pages are needed to shadow one guest page. For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the @@ -158,9 +158,9 @@ Shadow pages contain the following information: The page is invalid and should not be used. It is a root page that is currently pinned (by a cpu hardware register pointing to it); once it is unpinned it will be destroyed. - role.cr4_pae: - Contains the value of cr4.pae for which the page is valid (e.g. whether - 32-bit or 64-bit gptes are in use). + role.gpte_is_8_bytes: + Reflects the size of the guest PTE for which the page is valid, i.e. '1' + if 64-bit gptes are in use, '0' if 32-bit gptes are in use. role.nxe: Contains the value of efer.nxe for which the page is valid. role.cr0_wp: @@ -173,6 +173,9 @@ Shadow pages contain the following information: Contains the value of cr4.smap && !cr0.wp for which the page is valid (pages for which this is true are different from other pages; see the treatment of cr0.wp=0 below). + role.ept_sp: + This is a virtual flag to denote a shadowed nested EPT page. ept_sp + is true if "cr0_wp && smap_andnot_wp", an otherwise invalid combination. role.smm: Is 1 if the page is valid in system management mode. This field determines which of the kvm_memslots array was used to build this |