diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/dwc2.txt | 2 | ||||
| -rw-r--r-- | Documentation/usb/chipidea.txt | 9 |
2 files changed, 7 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 221368207ca4..20a68bf2b4e7 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -8,6 +8,8 @@ Required properties: - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; + - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; + - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - snps,dwc2: A generic DWC2 USB controller with default parameters. - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 05f735a1b5a5..678741b0f213 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -26,16 +26,17 @@ cat /sys/kernel/debug/ci_hdrc.0/registers On B-device: echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - if HNP polling is not supported, also need: - On A-device: - echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req - B-device should take host role and enumrate A-device. 4) A-device switch back to host. On B-device: echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req + or, by introducing HNP polling, B-Host can know when A-peripheral wish + to be host role, so this role switch also can be trigged in A-peripheral + side by answering the polling from B-Host, this can be done on A-device: + echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req + A-device should switch back to host and enumrate B-device. 5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, |