2 files changed, 63 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
new file mode 100644
index 000000000000..13aa4b62c62a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -0,0 +1,47 @@
+MIPS CPU interrupt controller
+
+On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+With the irq_domain in place we can describe how the 8 IRQs are wired to the
+platforms internal interrupt controller cascade.
+
+Below is an example of a platform describing the cascade inside the devicetree
+and the code used to load it inside arch_init_irq().
+
+Required properties:
+- compatible : Should be "mti,cpu-interrupt-controller"
+
+Example devicetree:
+	cpu-irq: cpu-irq@0 {
+		#address-cells = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: intc@200 {
+		compatible = "ralink,rt2880-intc";
+		reg = <0x200 0x100>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu-irq>;
+		interrupts = <2>;
+	};
+
+
+Example platform irq.c:
+static struct of_device_id __initdata of_irq_ids[] = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
new file mode 100644
index 000000000000..5b78591aaa46
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -0,0 +1,16 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+  depends on the interrupt-parent interrupt controller.
+
+Example:
+
+asc1: serial@E100C00 {
+	compatible = "lantiq,asc";
+	reg = <0xE100C00 0x400>;
+	interrupt-parent = <&icu0>;
+	interrupts = <112 113 114>;
+};