diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/net/apm-xgene-enet.txt | 5 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/dsa.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/stmmac.txt | 7 | ||||
| -rw-r--r-- | Documentation/input/alps.txt | 8 | ||||
| -rw-r--r-- | Documentation/input/event-codes.txt | 6 | ||||
| -rw-r--r-- | Documentation/input/multi-touch-protocol.txt | 9 | ||||
| -rw-r--r-- | Documentation/networking/can.txt | 20 |
7 files changed, 49 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index dc7961b33076..f55aa280d34f 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -14,7 +14,10 @@ Required properties for all the ethernet interfaces: - "enet_csr": Ethernet control and status register address space - "ring_csr": Descriptor ring control and status register address space - "ring_cmd": Descriptor ring command register address space -- interrupts: Ethernet main interrupt +- interrupts: Two interrupt specifiers can be specified. + - First is the Rx interrupt. This irq is mandatory. + - Second is the Tx completion interrupt. + This is supported only on SGMII based 1GbE and 10GbE interfaces. - port-id: Port number (0 or 1) - clocks: Reference to the clock entry. - local-mac-address: MAC address assigned to this device diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index e124847443f8..f0b4cd72411d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4 (DSA_MAX_SWITCHES). Each of these switch child nodes should have the following required properties: -- reg : Describes the switch address on the MII bus +- reg : Contains two fields. The first one describes the + address on the MII bus. The second is the switch + number that must be unique in cascaded configurations - #address-cells : Must be 1 - #size-cells : Must be 0 diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 8ca65cec52ae..29aca8591b16 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -35,10 +35,11 @@ Optional properties: - reset-names: Should contain the reset signal name "stmmaceth", if a reset phandle is given - max-frame-size: See ethernet.txt file in the same directory -- clocks: If present, the first clock should be the GMAC main clock, - further clocks may be specified in derived bindings. +- clocks: If present, the first clock should be the GMAC main clock and + the second clock should be peripheral's register interface clock. Further + clocks may be specified in derived bindings. - clock-names: One name for each entry in the clocks property, the - first one should be "stmmaceth". + first one should be "stmmaceth" and the second one should be "pclk". - clk_ptp_ref: this is the PTP reference clock; in case of the PTP is available this clock is used for programming the Timestamp Addend Register. If not passed then the system clock will be used and this is fine on some diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index a63e5e013a8c..92ae734c00c3 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2 byte 4: 0 y6 y5 y4 y3 y2 y1 y0 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 +Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for +the DualPoint Stick. + Dualpoint device -- interleaved packet format --------------------------------------------- @@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format byte 7: 0 y6 y5 y4 y3 y2 y1 y0 byte 8: 0 z6 z5 z4 z3 z2 z1 z0 +Devices which use the interleaving format normally send standard PS/2 mouse +packets for the DualPoint Stick + ALPS Absolute Mode packets for the +touchpad, switching to the interleaved packet format when both the stick and +the touchpad are used at the same time. + ALPS Absolute Mode - Protocol Version 3 --------------------------------------- diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index c587a966413e..96705616f582 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior. The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. +INPUT_PROP_ACCELEROMETER +------------------------- +Directional axes on this device (absolute and/or relative x, y, z) represent +accelerometer data. All other axes retain their meaning. A device must not mix +regular directional axes and accelerometer axes on the same event node. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 7b4f59c09ee2..b85d000faeb4 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE The type of approaching tool. A lot of kernel drivers cannot distinguish between different tool types, such as a finger or a pen. In such cases, the -event should be omitted. The protocol currently supports MT_TOOL_FINGER and -MT_TOOL_PEN [2]. For type B devices, this event is handled by input core; -drivers should instead use input_mt_report_slot_state(). +event should be omitted. The protocol currently supports MT_TOOL_FINGER, +MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled +by input core; drivers should instead use input_mt_report_slot_state(). +A contact's ABS_MT_TOOL_TYPE may change over time while still touching the +device, because the firmware may not be able to determine which tool is being +used when it first appears. ABS_MT_BLOB_ID diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 0a2859a8ee7e..5abad1e921ca 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -22,7 +22,8 @@ This file contains 4.1.3 RAW socket option CAN_RAW_LOOPBACK 4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS 4.1.5 RAW socket option CAN_RAW_FD_FRAMES - 4.1.6 RAW socket returned message flags + 4.1.6 RAW socket option CAN_RAW_JOIN_FILTERS + 4.1.7 RAW socket returned message flags 4.2 Broadcast Manager protocol sockets (SOCK_DGRAM) 4.2.1 Broadcast Manager operations 4.2.2 Broadcast Manager message flags @@ -601,7 +602,22 @@ solution for a couple of reasons: CAN FD frames by checking if the device maximum transfer unit is CANFD_MTU. The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. - 4.1.6 RAW socket returned message flags + 4.1.6 RAW socket option CAN_RAW_JOIN_FILTERS + + The CAN_RAW socket can set multiple CAN identifier specific filters that + lead to multiple filters in the af_can.c filter processing. These filters + are indenpendent from each other which leads to logical OR'ed filters when + applied (see 4.1.1). + + This socket option joines the given CAN filters in the way that only CAN + frames are passed to user space that matched *all* given CAN filters. The + semantic for the applied filters is therefore changed to a logical AND. + + This is useful especially when the filterset is a combination of filters + where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or + CAN ID ranges from the incoming traffic. + + 4.1.7 RAW socket returned message flags When using recvmsg() call, the msg->msg_flags may contain following flags: |