diff options
Diffstat (limited to 'Documentation')
10 files changed, 164 insertions, 9 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem index 5923ab4620c5..9ffba8576f7b 100644 --- a/Documentation/ABI/stable/sysfs-bus-nvmem +++ b/Documentation/ABI/stable/sysfs-bus-nvmem @@ -6,6 +6,8 @@ Description: This file allows user to read/write the raw NVMEM contents. Permissions for write to this file depends on the nvmem provider configuration. + Note: This file is only present if CONFIG_NVMEM_SYSFS + is enabled ex: hexdump /sys/bus/nvmem/devices/qfprom0/nvmem diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc index b940c5d91cf7..f54ae244f3f1 100644 --- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc +++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc @@ -30,4 +30,12 @@ Description: (RW) Configure MSC buffer size for "single" or "multi" modes. there are no active users and tracing is not enabled) and then allocates a new one. +What: /sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/win_switch +Date: May 2019 +KernelVersion: 5.2 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: (RW) Trigger window switch for the MSC's buffer, in + multi-window mode. In "multi" mode, accepts writes of "1", thereby + triggering a window switch for the buffer. Returns an error in any + other operating mode or attempts to write something other than "1". diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei index 17d7444a2397..a92d844f806e 100644 --- a/Documentation/ABI/testing/sysfs-class-mei +++ b/Documentation/ABI/testing/sysfs-class-mei @@ -65,3 +65,18 @@ Description: Display the ME firmware version. <platform>:<major>.<minor>.<milestone>.<build_no>. There can be up to three such blocks for different FW components. + +What: /sys/class/mei/meiN/dev_state +Date: Mar 2019 +KernelVersion: 5.1 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display the ME device state. + + The device state can have following values: + INITIALIZING + INIT_CLIENTS + ENABLED + RESETTING + DISABLED + POWER_DOWN + POWER_UP diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index f8aff65ab921..8a88ddebc1a2 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected sink. Each CoreSight component device should use these properties to describe its hardware characteristcs. -* Required properties for all components *except* non-configurable replicators: +* Required properties for all components *except* non-configurable replicators + and non-configurable funnels: * compatible: These have to be supplemented with "arm,primecell" as drivers are using the AMBA bus interface. Possible values include: @@ -24,8 +25,10 @@ its hardware characteristcs. discovered at boot time when the device is probed. "arm,coresight-tmc", "arm,primecell"; - - Trace Funnel: - "arm,coresight-funnel", "arm,primecell"; + - Trace Programmable Funnel: + "arm,coresight-dynamic-funnel", "arm,primecell"; + "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For + backward compatibility and will be removed) - Embedded Trace Macrocell (version 3.x) and Program Flow Trace Macrocell: @@ -65,11 +68,17 @@ its hardware characteristcs. "stm-stimulus-base", each corresponding to the areas defined in "reg". * Required properties for devices that don't show up on the AMBA bus, such as - non-configurable replicators: + non-configurable replicators and non-configurable funnels: * compatible: Currently supported value is (note the absence of the AMBA markee): - - "arm,coresight-replicator" + - Coresight Non-configurable Replicator: + "arm,coresight-static-replicator"; + "arm,coresight-replicator"; (OBSOLETE. For backward + compatibility and will be removed) + + - Coresight Non-configurable Funnel: + "arm,coresight-static-funnel"; * port or ports: see "Graph bindings for Coresight" below. @@ -169,7 +178,7 @@ Example: /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -200,8 +209,45 @@ Example: }; }; + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + combo_funnel_out: endpoint { + remote-endpoint = <&top_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + combo_funnel_in0: endpoint { + remote-endpoint = <&cluster0_etf_out>; + }; + }; + + port@1 { + reg = <1>; + combo_funnel_in1: endpoint { + remote-endpoint = <&cluster1_etf_out>; + }; + }; + }; + }; + funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&oscclk6a>; diff --git a/Documentation/devicetree/bindings/gnss/u-blox.txt b/Documentation/devicetree/bindings/gnss/u-blox.txt index e475659cb85f..7cdefd058fe0 100644 --- a/Documentation/devicetree/bindings/gnss/u-blox.txt +++ b/Documentation/devicetree/bindings/gnss/u-blox.txt @@ -9,6 +9,7 @@ Required properties: - compatible : Must be one of + "u-blox,neo-6m" "u-blox,neo-8" "u-blox,neo-m8" diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file mode 100644 index 000000000000..854bd67ffec6 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt @@ -0,0 +1,47 @@ +====================================================================== +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver +====================================================================== + +The bridge is available on platforms with the VGA enabled on the Aspeed device. +In this case, the host has access to a 64KiB window into all of the BMC's +memory. The BMC can disable this bridge. If the bridge is enabled, the host +has read access to all the regions of memory, however the host only has read +and write access depending on a register controlled by the BMC. + +Required properties: +=================== + + - compatible: must be one of: + - "aspeed,ast2400-p2a-ctrl" + - "aspeed,ast2500-p2a-ctrl" + +Optional properties: +=================== + +- memory-region: A phandle to a reserved_memory region to be used for the PCI + to AHB mapping + +The p2a-control node should be the child of a syscon node with the required +property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + +Example +=================== + +g4 Example +---------- + +syscon: scu@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + memory-region = <&reserved_memory>; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index 99c4ba6a3f61..cfb18b4ef8f7 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -8,11 +8,12 @@ Required properties: "allwinner,sun8i-h3-sid" "allwinner,sun50i-a64-sid" "allwinner,sun50i-h5-sid" + "allwinner,sun50i-h6-sid" - reg: Should contain registers location and length = Data cells = -Are child nodes of qfprom, bindings of which as described in +Are child nodes of sunxi-sid, bindings of which as described in bindings/nvmem/nvmem.txt Example for sun4i: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 7a999a135e56..68f7d6fdd140 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -1,7 +1,8 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs. +i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, +i.MX7D/S, i.MX7ULP and i.MX8MQ SoCs. Required properties: - compatible: should be one of @@ -13,6 +14,7 @@ Required properties: "fsl,imx7d-ocotp" (i.MX7D/S), "fsl,imx6sll-ocotp" (i.MX6SLL), "fsl,imx7ulp-ocotp" (i.MX7ULP), + "fsl,imx8mq-ocotp" (i.MX8MQ), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt new file mode 100644 index 000000000000..142a51d5a9be --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt @@ -0,0 +1,31 @@ +STMicroelectronics STM32 Factory-programmed data device tree bindings + +This represents STM32 Factory-programmed read only non-volatile area: locked +flash, OTP, read-only HW regs... This contains various information such as: +analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2), +internal vref (VREFIN_CAL), unique device ID... + +Required properties: +- compatible: Should be one of: + "st,stm32f4-otp" + "st,stm32mp15-bsec" +- reg: Offset and length of factory-programmed area. +- #address-cells: Should be '<1>'. +- #size-cells: Should be '<1>'. + +Optional Data cells: +- Must be child nodes as described in nvmem.txt. + +Example on stm32f4: + romem: nvmem@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells: ts_cal1 at 0x1fff7a2c */ + ts_cal1: calib@22c { + reg = <0x22c 0x2>; + }; + ... + }; diff --git a/Documentation/trace/intel_th.rst b/Documentation/trace/intel_th.rst index 19e2d633f3c7..baa12eb09ef4 100644 --- a/Documentation/trace/intel_th.rst +++ b/Documentation/trace/intel_th.rst @@ -1,3 +1,5 @@ +.. SPDX-License-Identifier: GPL-2.0 + ======================= Intel(R) Trace Hub (TH) ======================= |