diff options
Diffstat (limited to 'arch/arc/mm/cache.c')
| -rw-r--r-- | arch/arc/mm/cache.c | 83 |
1 files changed, 73 insertions, 10 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 7db283b46ebd..eee924dfffa6 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -652,7 +652,7 @@ static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr, #endif /* CONFIG_ARC_HAS_ICACHE */ -noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) +noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op) { #ifdef CONFIG_ISA_ARCV2 /* @@ -715,6 +715,58 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) #endif } +noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op) +{ +#ifdef CONFIG_ISA_ARCV2 + /* + * SLC is shared between all cores and concurrent aux operations from + * multiple cores need to be serialized using a spinlock + * A concurrent operation can be silently ignored and/or the old/new + * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop + * below) + */ + static DEFINE_SPINLOCK(lock); + + const unsigned long SLC_LINE_MASK = ~(l2_line_sz - 1); + unsigned int ctrl, cmd; + unsigned long flags; + int num_lines; + + spin_lock_irqsave(&lock, flags); + + ctrl = read_aux_reg(ARC_REG_SLC_CTRL); + + /* Don't rely on default value of IM bit */ + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + write_aux_reg(ARC_REG_SLC_CTRL, ctrl); + + cmd = op & OP_INV ? ARC_AUX_SLC_IVDL : ARC_AUX_SLC_FLDL; + + sz += paddr & ~SLC_LINE_MASK; + paddr &= SLC_LINE_MASK; + + num_lines = DIV_ROUND_UP(sz, l2_line_sz); + + while (num_lines-- > 0) { + write_aux_reg(cmd, paddr); + paddr += l2_line_sz; + } + + /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ + read_aux_reg(ARC_REG_SLC_CTRL); + + while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); + + spin_unlock_irqrestore(&lock, flags); +#endif +} + +#define slc_op(paddr, sz, op) slc_op_rgn(paddr, sz, op) + noinline static void slc_entire_op(const int op) { unsigned int ctrl, r = ARC_REG_SLC_CTRL; @@ -1095,7 +1147,7 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) */ noinline void __init arc_ioc_setup(void) { - unsigned int ap_sz; + unsigned int ioc_base, mem_sz; /* Flush + invalidate + disable L1 dcache */ __dc_disable(); @@ -1104,18 +1156,29 @@ noinline void __init arc_ioc_setup(void) if (read_aux_reg(ARC_REG_SLC_BCR)) slc_entire_op(OP_FLUSH_N_INV); - /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */ - write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); - /* - * IOC Aperture size: - * decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M + * currently IOC Aperture covers entire DDR * TBD: fix for PGU + 1GB of low mem * TBD: fix for PAE */ - ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2; - write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz); + mem_sz = arc_get_mem_sz(); + + if (!is_power_of_2(mem_sz) || mem_sz < 4096) + panic("IOC Aperture size must be power of 2 larger than 4KB"); + + /* + * IOC Aperture size decoded as 2 ^ (SIZE + 2) KB, + * so setting 0x11 implies 512MB, 0x12 implies 1GB... + */ + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, order_base_2(mem_sz >> 10) - 2); + + /* for now assume kernel base is start of IOC aperture */ + ioc_base = CONFIG_LINUX_RAM_BASE; + + if (ioc_base % mem_sz != 0) + panic("IOC Aperture start must be aligned to the size of the aperture"); + write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12); write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); @@ -1207,7 +1270,7 @@ void __ref arc_cache_init(void) unsigned int __maybe_unused cpu = smp_processor_id(); char str[256]; - printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + pr_info("%s", arc_cache_mumbojumbo(0, str, sizeof(str))); if (!cpu) arc_cache_init_master(); |