diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 418 |
1 files changed, 250 insertions, 168 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e356357d86bb..c6b6175d0203 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -129,7 +129,12 @@ choice config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" - depends on ARCH_BCM2835 + depends on ARCH_BCM2835 && ARCH_MULTI_V6 + select DEBUG_UART_PL01X + + config DEBUG_BCM2836 + bool "Kernel low-level debugging on BCM2836 PL011 UART" + depends on ARCH_BCM2835 && ARCH_MULTI_V7 select DEBUG_UART_PL01X config DEBUG_BCM_5301X @@ -148,10 +153,9 @@ choice mobile SoCs in the Kona family of chips (e.g. bcm28155, bcm11351, etc...) - config DEBUG_BCM63XX + config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" depends on ARCH_BCM_63XX - select DEBUG_UART_BCM63XX config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" @@ -218,23 +222,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_ZYNQ_UART0 - bool "Kernel low-level debugging on Xilinx Zynq using UART0" - depends on ARCH_ZYNQ - help - Say Y here if you want the debug print routines to direct - their output to UART0 on the Zynq platform. - - config DEBUG_ZYNQ_UART1 - bool "Kernel low-level debugging on Xilinx Zynq using UART1" - depends on ARCH_ZYNQ - help - Say Y here if you want the debug print routines to direct - their output to UART1 on the Zynq platform. - - If you have a ZC702 board and want early boot messages to - appear on the USB serial adaptor, select this option. - config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -249,13 +236,30 @@ choice Say Y here if you want the debug print routines to direct their output to the UA0 serial port in the CX92755. + config DEBUG_EP93XX + bool "Kernel low-level debugging messages via ep93xx UART" + depends on ARCH_EP93XX + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Cirrus Logic EP93xx based platforms. + config DEBUG_FOOTBRIDGE_COM1 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" depends on FOOTBRIDGE + select DEBUG_UART_8250 help Say Y here if you want the debug print routines to direct their output to the 8250 at PCI COM1. + config DEBUG_GEMINI + bool "Kernel low-level debugging messages via Cortina Systems Gemini UART" + depends on ARCH_GEMINI + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Cortina Gemini based platforms. + config DEBUG_HI3620_UART bool "Hisilicon HI3620 Debug UART" depends on ARCH_HI3xxx @@ -411,6 +415,14 @@ choice Say Y here if you want kernel low-level debugging support on i.MX7D. + config DEBUG_INTEGRATOR + bool "Kernel low-level debugging messages via ARM Integrator UART" + depends on ARCH_INTEGRATOR + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on ARM Integrator platforms. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -442,6 +454,14 @@ choice Say Y here if you want kernel low-level debugging support on NXP LPC18xx/43xx UART0. + config DEBUG_LPC32XX + bool "Kernel low-level debugging messages via NXP LPC32xx UART" + depends on ARCH_LPC32XX + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on NXP LPC32xx based platforms. + config DEBUG_MESON_UARTAO bool "Kernel low-level debugging via Meson6 UARTAO" depends on ARCH_MESON @@ -465,26 +485,10 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_QCOM_UARTDM - bool "Kernel low-level debugging messages via QCOM UARTDM" - depends on ARCH_QCOM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on Qualcomm devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT - APQ8064 0x16640000 0xf0040000 - APQ8084 0xf995e000 0xfa75e000 - MSM8X60 0x19c40000 0xf0040000 - MSM8960 0x16440000 0xf0040000 - MSM8974 0xf991e000 0xfa71e000 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_MVEBU_UART0 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" depends on ARCH_MVEBU + depends on ARCH_MVEBU && CPU_V7 select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support @@ -497,17 +501,23 @@ choice Plathome OpenBlocks AX3, when using the original bootloader. + This option will not work on older Marvell platforms + (Kirkwood, Dove, MV78xx0, Orion5x), which should pick + the "new bootloader" variant. + If the wrong DEBUG_MVEBU_UART* option is selected, when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. config DEBUG_MVEBU_UART0_ALTERNATE bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" - depends on ARCH_MVEBU + depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms on UART0. + on MVEBU based platforms on UART0. (Armada XP, Armada 3xx, + Kirkwood, Dove, MV78xx0, Orion5x). + This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. @@ -522,21 +532,41 @@ choice select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on MVEBU based platforms on UART1. + on MVEBU based platforms on UART1. (Armada XP, Armada 3xx, + Kirkwood, Dove, MV78xx0, Orion5x). This option should be used with the new bootloaders that remap the internal registers at 0xf1000000. + All of the older (pre Armada XP/370) platforms also use + this address, regardless of the boot loader version. If the wrong DEBUG_MVEBU_UART* option is selected, when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. - config DEBUG_VF_UART - bool "Vybrid UART" - depends on SOC_VF610 + config DEBUG_MT6589_UART0 + bool "Mediatek mt6589 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on Vybrid based platforms. + for Mediatek mt6589 based platforms on UART0. + + config DEBUG_MT8127_UART0 + bool "Mediatek mt8127/mt6592 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8127 based platforms on UART0. + + config DEBUG_MT8135_UART3 + bool "Mediatek mt8135 UART3" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt8135 based platforms on UART3. config DEBUG_NETX_UART bool "Kernel low-level debugging messages via NetX UART" @@ -700,6 +730,23 @@ choice Say Y here if you want kernel low-level debugging support on PXA UART1. + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM + help + Say Y here if you want the debug print routines to direct + their output to the serial port on Qualcomm devices. + + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -843,6 +890,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 0 for low-level debug" help @@ -854,6 +902,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 1 for low-level debug" help @@ -865,6 +914,7 @@ choice depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 2 for low-level debug" help @@ -875,6 +925,7 @@ choice config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C64XX_UART if ARCH_S3C64XX select DEBUG_S5PV210_UART if ARCH_S5PV210 bool "Use Samsung S3C UART 3 for low-level debug" help @@ -966,6 +1017,70 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. + config DEBUG_SIRFPRIMA2_UART1 + bool "Kernel low-level debugging messages via SiRFprimaII UART1" + depends on ARCH_PRIMA2 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFprimaII devices. + + config DEBUG_SIRFATLAS7_UART0 + bool "Kernel low-level debugging messages via SiRFatlas7 UART0" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart0 port on SiRFATLAS7 devices.The uart0 + is used on SiRFATLAS7 as a extra debug port.sometimes an extra + debug port can be very useful. + + config DEBUG_SIRFATLAS7_UART1 + bool "Kernel low-level debugging messages via SiRFatlas7 UART1" + depends on ARCH_ATLAS7 + select DEBUG_SIRFSOC_UART + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFATLAS7 devices. + + config DEBUG_SPEAR3XX + bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" + depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on ST SPEAr based platforms. + + config DEBUG_SPEAR13XX + bool "Kernel low-level debugging messages via ST SPEAr 13xx UART" + depends on ARCH_SPEAR13XX + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on ST SPEAr13xx based platforms. + + config STIH41X_DEBUG_ASC2 + bool "Use StiH415/416 ASC2 UART for low-level debug" + depends on ARCH_STI + select DEBUG_STI_UART + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2000, which has + default UART wired up to ASC2. + + If unsure, say N. + + config STIH41X_DEBUG_SBC_ASC1 + bool "Use StiH415/416 SBC ASC1 UART for low-level debug" + depends on ARCH_STI + select DEBUG_STI_UART + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2020. which has + default UART wired up to SBC ASC1. + + If unsure, say N. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -1018,54 +1133,6 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. - config DEBUG_SIRFPRIMA2_UART1 - bool "Kernel low-level debugging messages via SiRFprimaII UART1" - depends on ARCH_PRIMA2 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFprimaII devices. - - config DEBUG_SIRFATLAS7_UART0 - bool "Kernel low-level debugging messages via SiRFatlas7 UART0" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart0 port on SiRFATLAS7 devices.The uart0 - is used on SiRFATLAS7 as a extra debug port.sometimes an extra - debug port can be very useful. - - config DEBUG_SIRFATLAS7_UART1 - bool "Kernel low-level debugging messages via SiRFatlas7 UART1" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFATLAS7 devices. - - config STIH41X_DEBUG_ASC2 - bool "Use StiH415/416 ASC2 UART for low-level debug" - depends on ARCH_STI - select DEBUG_STI_UART - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2000, which has - default UART wired up to ASC2. - - If unsure, say N. - - config STIH41X_DEBUG_SBC_ASC1 - bool "Use StiH415/416 SBC ASC1 UART for low-level debug" - depends on ARCH_STI - select DEBUG_STI_UART - help - Say Y here if you want kernel low-level debugging support - on STiH415/416 based platforms like b2020. which has - default UART wired up to SBC ASC1. - - If unsure, say N. - config DEBUG_U300_UART bool "Kernel low-level debugging messages via U300 UART0" depends on ARCH_U300 @@ -1081,29 +1148,13 @@ choice Say Y here if you want kernel low-level debugging support on Ux500 based platforms. - config DEBUG_MT6589_UART0 - bool "Mediatek mt6589 UART0" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt6589 based platforms on UART0. - - config DEBUG_MT8127_UART0 - bool "Mediatek mt8127/mt6592 UART0" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - for Mediatek mt8127 based platforms on UART0. - - config DEBUG_MT8135_UART3 - bool "Mediatek mt8135 UART3" - depends on ARCH_MEDIATEK - select DEBUG_UART_8250 + config DEBUG_VERSATILE + bool "Kernel low-level debugging messages via ARM Versatile UART" + depends on ARCH_VERSATILE + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support - for Mediatek mt8135 based platforms on UART3. + on ARM Versatile platforms. config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" @@ -1141,6 +1192,13 @@ choice This option selects UART0 at 0xb0090000. This is appropriate for Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 + config DEBUG_VF_UART + bool "Vybrid UART" + depends on SOC_VF610 + help + Say Y here if you want kernel low-level debugging support + on Vybrid based platforms. + config DEBUG_VT8500_UART0 bool "Use UART0 on VIA/Wondermedia SoCs" depends on ARCH_VT8500 @@ -1148,6 +1206,35 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_ZTE_ZX + bool "Use ZTE ZX UART" + select DEBUG_UART_PL01X + depends on ARCH_ZX + help + Say Y here if you are enabling ZTE ZX296702 SOC and need + debug uart support. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + + config DEBUG_ZYNQ_UART0 + bool "Kernel low-level debugging on Xilinx Zynq using UART0" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART0 on the Zynq platform. + + config DEBUG_ZYNQ_UART1 + bool "Kernel low-level debugging on Xilinx Zynq using UART1" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART1 on the Zynq platform. + + If you have a ZC702 board and want early boot messages to + appear on the USB serial adaptor, select this option. + config DEBUG_ICEDCC bool "Kernel low-level debugging via EmbeddedICE DCC channel" help @@ -1175,18 +1262,6 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help @@ -1239,6 +1314,9 @@ config DEBUG_S3C2410_UART config DEBUG_S3C24XX_UART bool +config DEBUG_S3C64XX_UART + bool + config DEBUG_S5PV210_UART bool @@ -1294,6 +1372,7 @@ config DEBUG_LL_INCLUDE default "debug/at91.S" if DEBUG_AT91_UART default "debug/asm9260.S" if DEBUG_ASM9260_UART default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 + default "debug/dc21285.S" if DEBUG_DC21285_PORT default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART @@ -1324,7 +1403,7 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STI_UART @@ -1334,7 +1413,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 - default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX + default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "mach/debug-macro.S" @@ -1344,15 +1423,9 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_DOVE || ARCH_EBSA110 || \ - (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ - ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ - ARCH_IOP33X || ARCH_IXP4XX || \ - ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC - -# Compatibility options for BCM63xx -config DEBUG_UART_BCM63XX - def_bool ARCH_BCM_63XX + def_bool ARCH_EBSA110 || \ + ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \ + ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" @@ -1373,12 +1446,12 @@ config DEBUG_UART_PHYS default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT default 0x10124000 if DEBUG_RK3X_UART0 default 0x10126000 if DEBUG_RK3X_UART1 - default 0x101f1000 if ARCH_VERSATILE + default 0x101f1000 if DEBUG_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART default 0x11002000 if DEBUG_MT8127_UART0 default 0x11006000 if DEBUG_MT6589_UART0 default 0x11009000 if DEBUG_MT8135_UART3 - default 0x16000000 if ARCH_INTEGRATOR + default 0x16000000 if DEBUG_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 @@ -1388,12 +1461,13 @@ config DEBUG_UART_PHYS default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40081000 if DEBUG_LPC18XX_UART0 - default 0x40090000 if ARCH_LPC32XX + default 0x40090000 if DEBUG_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 - default 0x42000000 if ARCH_GEMINI + default 0x42000000 if DEBUG_GEMINI default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ @@ -1401,24 +1475,28 @@ config DEBUG_UART_PHYS default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) default 0x78000000 if DEBUG_CNS3XXX - default 0x7c0003f8 if FOOTBRIDGE + default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 + default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 + default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 + default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 + default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART - default 0x808c0000 if ARCH_EP93XX + default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN - default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX + default 0xd0000000 if DEBUG_SPEAR3XX default 0xd0012000 if DEBUG_MVEBU_UART0 default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 - default 0xe0000000 if ARCH_SPEAR13XX + default 0xe0000000 if DEBUG_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 @@ -1430,8 +1508,6 @@ config DEBUG_UART_PHYS default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ - ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM @@ -1448,7 +1524,7 @@ config DEBUG_UART_PHYS default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xfffe8600 if DEBUG_UART_BCM63XX + default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xfffff700 if ARCH_IOP33X depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1460,7 +1536,8 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_S3C64XX_UART || \ + DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART @@ -1471,22 +1548,27 @@ config DEBUG_UART_VIRT default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART - default 0xf0201000 if DEBUG_BCM2835 + default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 - default 0xf11f1000 if ARCH_VERSATILE - default 0xf1600000 if ARCH_INTEGRATOR + default 0xf11f1000 if DEBUG_VERSATILE + default 0xf1600000 if DEBUG_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf1f02800 if DEBUG_SUNXI_R_UART + default 0xf31004c0 if DEBUG_MESON_UARTAO + default 0xf4090000 if DEBUG_LPC32XX + default 0xf4200000 if DEBUG_GEMINI default 0xf6200000 if DEBUG_PXA_UART1 - default 0xf4090000 if ARCH_LPC32XX - default 0xf4200000 if ARCH_GEMINI default 0xf7000000 if DEBUG_SUN9I_UART0 + default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) + default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 + default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 + default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ DEBUG_S3C2410_UART1) default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ @@ -1501,14 +1583,12 @@ config DEBUG_UART_VIRT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfc705000 if DEBUG_ZTE_ZX - default 0xfcfe8600 if DEBUG_UART_BCM63XX - default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX - default 0xfd000000 if ARCH_SPEAR13XX - default 0xfd012000 if ARCH_MV78XX0 + default 0xfcfe8600 if DEBUG_BCM63XX_UART + default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX + default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0 default 0xfd883000 if DEBUG_ALPINE_UART0 - default 0xfde12000 if ARCH_DOVE - default 0xfe012000 if ARCH_ORION5X - default 0xf31004c0 if DEBUG_MESON_UARTAO + default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE + default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1522,7 +1602,7 @@ config DEBUG_UART_VIRT default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART0 default 0xfec02100 if DEBUG_SOCFPGA_UART1 - default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE + default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 @@ -1534,8 +1614,8 @@ config DEBUG_UART_VIRT default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 - default 0xfedc0000 if ARCH_EP93XX - default 0xfee003f8 if FOOTBRIDGE + default 0xfedc0000 if DEBUG_EP93XX + default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN @@ -1552,13 +1632,14 @@ config DEBUG_UART_VIRT DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_S3C64XX_UART || \ + DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \ + default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3 default 2 @@ -1566,8 +1647,9 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \ - DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \ + default y if DEBUG_PICOXCELL_UART || \ + DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \ + DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \ DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ @@ -1577,7 +1659,7 @@ config DEBUG_UART_8250_WORD config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 - default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC + default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC config DEBUG_UNCOMPRESS bool |