diff options
Diffstat (limited to 'arch/arm/boot/dts/arm-realview-pbx.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/arm-realview-pbx.dtsi | 82 |
1 files changed, 55 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index aeb49c4bd773..10868ba3277f 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -34,7 +34,8 @@ serial1 = &serial1; serial2 = &serial2; serial3 = &serial3; - i2c0 = &i2c; + i2c0 = &i2c0; + i2c1 = &i2c1; }; memory { @@ -158,6 +159,49 @@ port1-otg; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + /* + * This DDC I2C is connected directly to the DVI portions + * of the connector, so it's not really working when the + * monitor is connected to the VGA connector. + */ + compatible = "vga-connector"; + ddc-i2c-bus = <&i2c1>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + soc: soc@0 { compatible = "arm,realview-pbx-soc", "simple-bus"; #address-cells = <1>; @@ -285,7 +329,7 @@ <&timclk>; }; - i2c: i2c@10002000 { + i2c0: i2c@10002000 { #address-cells = <1>; #size-cells = <0>; compatible = "arm,versatile-i2c"; @@ -396,7 +440,12 @@ clock-names = "apb_pclk"; }; - /* DVI serial bus control is at 10016000 */ + i2c1: i2c@10016000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10016000 0x1000>; + }; rtc: rtc@10017000 { compatible = "arm,pl031", "arm,primecell"; @@ -506,36 +555,15 @@ interrupt-names = "combined"; clocks = <&oscclk4>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 1024x768 16bpp @65MHz works fine */ + max-memory-bandwidth = <95000000>; port { clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + remote-endpoint = <&vga_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; - }; - }; }; }; }; |