diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-xp-mv78260.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/armada-xp-mv78260.dtsi | 44 |
1 files changed, 22 insertions, 22 deletions
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 6dae1bc59baf..1faacd13d514 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -47,7 +47,7 @@ soc { pinctrl { compatible = "marvell,mv78260-pinctrl"; - reg = <0xd0018000 0x38>; + reg = <0x18000 0x38>; sdio_pins: sdio-pins { marvell,pins = "mpp30", "mpp31", "mpp32", @@ -56,9 +56,9 @@ }; }; - gpio0: gpio@d0018100 { + gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; + reg = <0x18100 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; @@ -67,9 +67,9 @@ interrupts = <82>, <83>, <84>, <85>; }; - gpio1: gpio@d0018140 { + gpio1: gpio@18140 { compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; + reg = <0x18140 0x40>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; @@ -78,9 +78,9 @@ interrupts = <87>, <88>, <89>, <90>; }; - gpio2: gpio@d0018180 { + gpio2: gpio@18180 { compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; + reg = <0x18180 0x40>; ngpios = <3>; gpio-controller; #gpio-cells = <2>; @@ -89,9 +89,9 @@ interrupts = <91>; }; - ethernet@d0034000 { + ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; + reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; @@ -112,19 +112,19 @@ bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ pcie@1,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -140,7 +140,7 @@ pcie@2,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -156,7 +156,7 @@ pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -172,7 +172,7 @@ pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -188,7 +188,7 @@ pcie@9,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -204,7 +204,7 @@ pcie@10,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0082000 0 0x2000>; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; |