diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts')
-rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts | 368 |
1 files changed, 368 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts new file mode 100644 index 000000000000..9f194b5eeba4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Facebook Backpack CMM BMC"; + compatible = "facebook,cmm-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + + /* + * Hardcode the bus number of i2c switches' channels to + * avoid breaking the legacy applications. + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + }; + + chosen { + stdout-path = &uart1; + bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * wdt2 is not used by Backpack CMM. + */ +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_ndsr1_default + &pinctrl_ndtr1_default + &pinctrl_nrts1_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default + &pinctrl_ncts3_default + &pinctrl_ndcd3_default + &pinctrl_nri3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +/* + * I2C bus reserved for communication with COM-E. + */ +&i2c0 { + status = "okay"; +}; + +/* + * I2C bus to Line Cards and Fabric Cards. + */ +&i2c1 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2C bus to Power Distribution Board. + */ +&i2c2 { + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2c bus connected with temperature sensors on CMM. + */ +&i2c3 { + status = "okay"; +}; + +/* + * I2C bus reserved for communication with COM-E. + */ +&i2c4 { + status = "okay"; +}; + +/* + * I2c bus connected with ADM1278. + */ +&i2c5 { + status = "okay"; +}; + +/* + * I2c bus connected with I/O Expander. + */ +&i2c6 { + status = "okay"; +}; + +/* + * I2c bus connected with I/O Expander and EPROMs. + */ +&i2c7 { + status = "okay"; +}; + +/* + * I2C bus to Fan Control Board. + */ +&i2c8 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +/* + * I2C bus to CMM CPLD. + */ +&i2c13 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; |