diff options
Diffstat (limited to 'arch/arm/boot/dts/gemini-dlink-dir-685.dts')
| -rw-r--r-- | arch/arm/boot/dts/gemini-dlink-dir-685.dts | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index 10ab4d878513..e75e2d44371c 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -32,6 +32,7 @@ wakeup-source; linux,code = <KEY_ESC>; label = "reset"; + /* Collides with LPC_LAD[0], UART DCD, SSP 97RST */ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; button-eject { @@ -39,6 +40,7 @@ wakeup-source; linux,code = <KEY_EJECTCD>; label = "unmount"; + /* Collides with LPC LFRAME, UART RTS, SSP TXD */ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; }; @@ -47,6 +49,7 @@ compatible = "gpio-leds"; led-wps { label = "dir685:blue:WPS"; + /* Collides with ICE */ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; @@ -61,11 +64,13 @@ */ led-blue-hd { label = "dir685:blue:HD"; + /* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; default-state = "off"; }; led-orange-hd { label = "dir685:orange:HD"; + /* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -81,6 +86,7 @@ */ gpio-fan { compatible = "gpio-fan"; + /* Collides with IDE */ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <10000 1>; #cooling-cells = <2>; @@ -92,6 +98,7 @@ */ gpio-i2c { compatible = "i2c-gpio"; + /* Collides with ICE */ gpios = <&gpio0 5 0>, /* SDA */ <&gpio0 6 0>; /* SCL */ #address-cells = <1>; @@ -101,6 +108,7 @@ compatible = "dlink,dir685-touchkeys"; reg = <0x26>; interrupt-parent = <&gpio0>; + /* Collides with NAND flash */ interrupts = <17 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -156,12 +164,59 @@ }; }; + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0bgrp cover line 5, 6 used by TK I2C + * gpio0bgrp cover line 7 used by WPS LED + * gpio0cgrp cover line 8, 13 used by keys + * and 11, 12 used by the HD LEDs + * gpio0egrp cover line 16 used by VDISP + * gpio0fgrp cover line 17 used by TK IRQ + * gpio0ggrp cover line 20 used by panel CS + * gpio0hgrp cover line 21,22 used by RTL8366RB + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0bgrp", + "gpio0cgrp", + "gpio0egrp", + "gpio0fgrp", + "gpio0ggrp", + "gpio0hgrp"; + }; + }; + /* + * gpio1bgrp cover line 5,8,7 used by panel SPI + * also line 6 used by the fan + * + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1bgrp"; + }; + }; + }; + }; + sata: sata@46000000 { cortina,gemini-ata-muxmode = <0>; cortina,gemini-enable-sata-bridge; status = "okay"; }; + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; |