diff options
Diffstat (limited to 'arch/arm/boot/dts/imx23.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx23.dtsi | 634 |
1 files changed, 0 insertions, 634 deletions
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi deleted file mode 100644 index a3668a0827fc..000000000000 --- a/arch/arm/boot/dts/imx23.dtsi +++ /dev/null @@ -1,634 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright 2012 Freescale Semiconductor, Inc. - -#include "imx23-pinfunc.h" - -/ { - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&icoll>; - /* - * The decompressor and also some bootloaders rely on a - * pre-existing /chosen node to be available to insert the - * command line and merge other ATAGS info. - */ - chosen {}; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - serial0 = &auart0; - serial1 = &auart1; - spi0 = &ssp0; - spi1 = &ssp1; - usbphy0 = &usbphy0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,arm926ej-s"; - device_type = "cpu"; - reg = <0>; - }; - }; - - apb@80000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80000000 0x80000>; - ranges; - - apbh@80000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80000000 0x40000>; - ranges; - - icoll: interrupt-controller@80000000 { - compatible = "fsl,imx23-icoll", "fsl,icoll"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x80000000 0x2000>; - }; - - dma_apbh: dma-controller@80004000 { - compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 0x2000>; - interrupts = <0 14 20 0 - 13 13 13 13>; - #dma-cells = <1>; - dma-channels = <8>; - clocks = <&clks 15>; - }; - - ecc@80008000 { - reg = <0x80008000 0x2000>; - status = "disabled"; - }; - - nand-controller@8000c000 { - compatible = "fsl,imx23-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <56>; - interrupt-names = "bch"; - clocks = <&clks 34>; - clock-names = "gpmi_io"; - dmas = <&dma_apbh 4>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - ssp0: spi@80010000 { - reg = <0x80010000 0x2000>; - interrupts = <15>; - clocks = <&clks 33>; - dmas = <&dma_apbh 1>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - etm@80014000 { - reg = <0x80014000 0x2000>; - status = "disabled"; - }; - - pinctrl@80018000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 0x2000>; - - gpio0: gpio@0 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; - reg = <0>; - interrupts = <16>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@1 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; - reg = <1>; - interrupts = <17>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@2 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; - reg = <2>; - interrupts = <18>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - duart_pins_a: duart@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_PWM0__DUART_RX - MX23_PAD_PWM1__DUART_TX - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - auart0_pins_a: auart0@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_AUART1_RX__AUART1_RX - MX23_PAD_AUART1_TX__AUART1_TX - MX23_PAD_AUART1_CTS__AUART1_CTS - MX23_PAD_AUART1_RTS__AUART1_RTS - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - auart0_2pins_a: auart0-2pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_I2C_SCL__AUART1_TX - MX23_PAD_I2C_SDA__AUART1_RX - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - auart1_2pins_a: auart1-2pins@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_GPMI_D14__AUART2_RX - MX23_PAD_GPMI_D15__AUART2_TX - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - gpmi_pins_a: gpmi-nand@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_GPMI_D00__GPMI_D00 - MX23_PAD_GPMI_D01__GPMI_D01 - MX23_PAD_GPMI_D02__GPMI_D02 - MX23_PAD_GPMI_D03__GPMI_D03 - MX23_PAD_GPMI_D04__GPMI_D04 - MX23_PAD_GPMI_D05__GPMI_D05 - MX23_PAD_GPMI_D06__GPMI_D06 - MX23_PAD_GPMI_D07__GPMI_D07 - MX23_PAD_GPMI_CLE__GPMI_CLE - MX23_PAD_GPMI_ALE__GPMI_ALE - MX23_PAD_GPMI_RDY0__GPMI_RDY0 - MX23_PAD_GPMI_RDY1__GPMI_RDY1 - MX23_PAD_GPMI_WPN__GPMI_WPN - MX23_PAD_GPMI_WRN__GPMI_WRN - MX23_PAD_GPMI_RDN__GPMI_RDN - MX23_PAD_GPMI_CE1N__GPMI_CE1N - MX23_PAD_GPMI_CE0N__GPMI_CE0N - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - gpmi_pins_fixup: gpmi-pins-fixup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_GPMI_WPN__GPMI_WPN - MX23_PAD_GPMI_WRN__GPMI_WRN - MX23_PAD_GPMI_RDN__GPMI_RDN - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - }; - - mmc0_4bit_pins_a: mmc0-4bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_SSP1_DATA0__SSP1_DATA0 - MX23_PAD_SSP1_DATA1__SSP1_DATA1 - MX23_PAD_SSP1_DATA2__SSP1_DATA2 - MX23_PAD_SSP1_DATA3__SSP1_DATA3 - MX23_PAD_SSP1_CMD__SSP1_CMD - MX23_PAD_SSP1_SCK__SSP1_SCK - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc0_8bit_pins_a: mmc0-8bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_SSP1_DATA0__SSP1_DATA0 - MX23_PAD_SSP1_DATA1__SSP1_DATA1 - MX23_PAD_SSP1_DATA2__SSP1_DATA2 - MX23_PAD_SSP1_DATA3__SSP1_DATA3 - MX23_PAD_GPMI_D08__SSP1_DATA4 - MX23_PAD_GPMI_D09__SSP1_DATA5 - MX23_PAD_GPMI_D10__SSP1_DATA6 - MX23_PAD_GPMI_D11__SSP1_DATA7 - MX23_PAD_SSP1_CMD__SSP1_CMD - MX23_PAD_SSP1_DETECT__SSP1_DETECT - MX23_PAD_SSP1_SCK__SSP1_SCK - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc0_pins_fixup: mmc0-pins-fixup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_SSP1_DETECT__SSP1_DETECT - MX23_PAD_SSP1_SCK__SSP1_SCK - >; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc0_sck_cfg: mmc0-sck-cfg@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_SSP1_SCK__SSP1_SCK - >; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc1_4bit_pins_a: mmc1-4bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_GPMI_D00__SSP2_DATA0 - MX23_PAD_GPMI_D01__SSP2_DATA1 - MX23_PAD_GPMI_D02__SSP2_DATA2 - MX23_PAD_GPMI_D03__SSP2_DATA3 - MX23_PAD_GPMI_RDY1__SSP2_CMD - MX23_PAD_GPMI_WRN__SSP2_SCK - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc1_8bit_pins_a: mmc1-8bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_GPMI_D00__SSP2_DATA0 - MX23_PAD_GPMI_D01__SSP2_DATA1 - MX23_PAD_GPMI_D02__SSP2_DATA2 - MX23_PAD_GPMI_D03__SSP2_DATA3 - MX23_PAD_GPMI_D04__SSP2_DATA4 - MX23_PAD_GPMI_D05__SSP2_DATA5 - MX23_PAD_GPMI_D06__SSP2_DATA6 - MX23_PAD_GPMI_D07__SSP2_DATA7 - MX23_PAD_GPMI_RDY1__SSP2_CMD - MX23_PAD_GPMI_WRN__SSP2_SCK - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - pwm2_pins_a: pwm2@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_PWM2__PWM2 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_24bit_pins_a: lcdif-24bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_LCD_D00__LCD_D00 - MX23_PAD_LCD_D01__LCD_D01 - MX23_PAD_LCD_D02__LCD_D02 - MX23_PAD_LCD_D03__LCD_D03 - MX23_PAD_LCD_D04__LCD_D04 - MX23_PAD_LCD_D05__LCD_D05 - MX23_PAD_LCD_D06__LCD_D06 - MX23_PAD_LCD_D07__LCD_D07 - MX23_PAD_LCD_D08__LCD_D08 - MX23_PAD_LCD_D09__LCD_D09 - MX23_PAD_LCD_D10__LCD_D10 - MX23_PAD_LCD_D11__LCD_D11 - MX23_PAD_LCD_D12__LCD_D12 - MX23_PAD_LCD_D13__LCD_D13 - MX23_PAD_LCD_D14__LCD_D14 - MX23_PAD_LCD_D15__LCD_D15 - MX23_PAD_LCD_D16__LCD_D16 - MX23_PAD_LCD_D17__LCD_D17 - MX23_PAD_GPMI_D08__LCD_D18 - MX23_PAD_GPMI_D09__LCD_D19 - MX23_PAD_GPMI_D10__LCD_D20 - MX23_PAD_GPMI_D11__LCD_D21 - MX23_PAD_GPMI_D12__LCD_D22 - MX23_PAD_GPMI_D13__LCD_D23 - MX23_PAD_LCD_DOTCK__LCD_DOTCK - MX23_PAD_LCD_ENABLE__LCD_ENABLE - MX23_PAD_LCD_HSYNC__LCD_HSYNC - MX23_PAD_LCD_VSYNC__LCD_VSYNC - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - spi2_pins_a: spi2@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_GPMI_WRN__SSP2_SCK - MX23_PAD_GPMI_RDY1__SSP2_CMD - MX23_PAD_GPMI_D00__SSP2_DATA0 - MX23_PAD_GPMI_D03__SSP2_DATA3 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - i2c_pins_a: i2c@0 { - reg = <0>; - fsl,pinmux-ids = < - MX23_PAD_I2C_SCL__I2C_SCL - MX23_PAD_I2C_SDA__I2C_SDA - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - i2c_pins_b: i2c@1 { - reg = <1>; - fsl,pinmux-ids = < - MX23_PAD_LCD_ENABLE__I2C_SCL - MX23_PAD_LCD_HSYNC__I2C_SDA - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - i2c_pins_c: i2c@2 { - reg = <2>; - fsl,pinmux-ids = < - MX23_PAD_SSP1_DATA1__I2C_SCL - MX23_PAD_SSP1_DATA2__I2C_SDA - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - digctl@8001c000 { - compatible = "fsl,imx23-digctl"; - reg = <0x8001c000 2000>; - status = "disabled"; - }; - - emi@80020000 { - reg = <0x80020000 0x2000>; - status = "disabled"; - }; - - dma_apbx: dma-apbx@80024000 { - compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 0x2000>; - interrupts = <7 5 9 26 - 19 0 25 23 - 60 58 9 0 - 0 0 0 0>; - interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", - "saif0", "empty", "auart0-rx", "auart0-tx", - "auart1-rx", "auart1-tx", "saif1", "empty", - "empty", "empty", "empty", "empty"; - #dma-cells = <1>; - dma-channels = <16>; - clocks = <&clks 16>; - }; - - dcp: crypto@80028000 { - compatible = "fsl,imx23-dcp"; - reg = <0x80028000 0x2000>; - interrupts = <53 54>; - status = "okay"; - }; - - pxp@8002a000 { - reg = <0x8002a000 0x2000>; - status = "disabled"; - }; - - efuse@8002c000 { - compatible = "fsl,imx23-ocotp", "fsl,ocotp"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x8002c000 0x2000>; - clocks = <&clks 15>; - }; - - axi-ahb@8002e000 { - reg = <0x8002e000 0x2000>; - status = "disabled"; - }; - - lcdif@80030000 { - compatible = "fsl,imx23-lcdif"; - reg = <0x80030000 2000>; - interrupts = <46 45>; - clocks = <&clks 38>; - status = "disabled"; - }; - - ssp1: spi@80034000 { - reg = <0x80034000 0x2000>; - interrupts = <2>; - clocks = <&clks 33>; - dmas = <&dma_apbh 2>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - tvenc@80038000 { - reg = <0x80038000 0x2000>; - status = "disabled"; - }; - }; - - apbx@80040000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80040000 0x40000>; - ranges; - - clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; - reg = <0x80040000 0x2000>; - #clock-cells = <1>; - }; - - saif0: saif@80042000 { - reg = <0x80042000 0x2000>; - dmas = <&dma_apbx 4>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - power@80044000 { - reg = <0x80044000 0x2000>; - status = "disabled"; - }; - - saif1: saif@80046000 { - reg = <0x80046000 0x2000>; - dmas = <&dma_apbx 10>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - audio-out@80048000 { - reg = <0x80048000 0x2000>; - dmas = <&dma_apbx 1>; - dma-names = "tx"; - status = "disabled"; - }; - - audio-in@8004c000 { - reg = <0x8004c000 0x2000>; - dmas = <&dma_apbx 0>; - dma-names = "rx"; - status = "disabled"; - }; - - lradc: lradc@80050000 { - compatible = "fsl,imx23-lradc"; - reg = <0x80050000 0x2000>; - interrupts = <36 37 38 39 40 41 42 43 44>; - status = "disabled"; - clocks = <&clks 26>; - #io-channel-cells = <1>; - }; - - spdif@80054000 { - reg = <0x80054000 2000>; - dmas = <&dma_apbx 2>; - dma-names = "tx"; - status = "disabled"; - }; - - i2c: i2c@80058000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx23-i2c"; - reg = <0x80058000 0x2000>; - interrupts = <27>; - clock-frequency = <100000>; - dmas = <&dma_apbx 3>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - rtc@8005c000 { - compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 0x2000>; - interrupts = <22>; - }; - - pwm: pwm@80064000 { - compatible = "fsl,imx23-pwm"; - reg = <0x80064000 0x2000>; - clocks = <&clks 30>; - #pwm-cells = <2>; - fsl,pwm-number = <5>; - status = "disabled"; - }; - - timrot@80068000 { - compatible = "fsl,imx23-timrot", "fsl,timrot"; - reg = <0x80068000 0x2000>; - interrupts = <28 29 30 31>; - clocks = <&clks 28>; - }; - - auart0: serial@8006c000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006c000 0x2000>; - interrupts = <24>; - clocks = <&clks 32>; - dmas = <&dma_apbx 6>, <&dma_apbx 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - auart1: serial@8006e000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006e000 0x2000>; - interrupts = <59>; - clocks = <&clks 32>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - duart: serial@80070000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80070000 0x2000>; - interrupts = <0>; - clocks = <&clks 32>, <&clks 16>; - clock-names = "uart", "apb_pclk"; - status = "disabled"; - }; - - usbphy0: usbphy@8007c000 { - compatible = "fsl,imx23-usbphy"; - reg = <0x8007c000 0x2000>; - clocks = <&clks 41>; - status = "disabled"; - }; - }; - }; - - ahb@80080000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80080000 0x80000>; - ranges; - - usb0: usb@80080000 { - compatible = "fsl,imx23-usb", "fsl,imx27-usb"; - reg = <0x80080000 0x40000>; - interrupts = <11>; - fsl,usbphy = <&usbphy0>; - clocks = <&clks 40>; - status = "disabled"; - }; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&lradc 8>; - }; -}; |