diff options
Diffstat (limited to 'arch/arm/boot/dts/imx53-mba53.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx53-mba53.dts | 52 |
1 files changed, 34 insertions, 18 deletions
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index a63090267941..7c8c12969892 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -17,14 +17,6 @@ model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; - reg_backlight: fixed@0 { - compatible = "regulator-fixed"; - regulator-name = "lcd-supply"; - gpio = <&gpio2 5 0>; - startup-delay-us = <5000>; - enable-active-low; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -38,17 +30,37 @@ compatible = "fsl,imx-parallel-display"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_disp1_1>; - crtcs = <&ipu 1>; interface-pix-fmt = "rgb24"; status = "disabled"; + + port { + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; + }; }; - reg_3p2v: 3p2v { - compatible = "regulator-fixed"; - regulator-name = "3P2V"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_backlight: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "lcd-supply"; + gpio = <&gpio2 5 0>; + startup-delay-us = <5000>; + }; + + reg_3p2v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; }; sound { @@ -141,6 +153,10 @@ }; }; +&ipu_di1_disp1 { + remote-endpoint = <&display1_in>; +}; + &cspi { status = "okay"; }; @@ -148,14 +164,14 @@ &audmux { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; + pinctrl-0 = <&pinctrl_audmux>; }; &i2c2 { codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clocks = <&clks 150>; + clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; }; @@ -228,7 +244,7 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync_1>; - ddc = <&i2c3>; + i2c-ddc-bus = <&i2c3>; fsl,tve-mode = "vga"; fsl,hsync-pin = <4>; fsl,vsync-pin = <6>; |