summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6q-gw5400-a.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx6q-gw5400-a.dts')
-rw-r--r--arch/arm/boot/dts/imx6q-gw5400-a.dts208
1 files changed, 92 insertions, 116 deletions
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 3689eaa58826..822ffb231c57 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -10,6 +10,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
@@ -18,7 +19,6 @@
/* these are used by bootloader for disabling nodes */
aliases {
- ethernet0 = &fec;
ethernet1 = &eth1;
i2c0 = &i2c1;
i2c1 = &i2c2;
@@ -26,12 +26,10 @@
led0 = &led0;
led1 = &led1;
led2 = &led2;
- sky2 = &eth1;
ssi0 = &ssi1;
spi0 = &ecspi1;
usb0 = &usbh1;
usb1 = &usbotg;
- usdhc2 = &usdhc3;
};
chosen {
@@ -40,23 +38,25 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
led0: user1 {
label = "user1";
- gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
led1: user2 {
label = "user2";
- gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+ gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
default-state = "off";
};
led2: user3 {
label = "user3";
- gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
default-state = "off";
};
};
@@ -67,7 +67,9 @@
pps {
compatible = "pps-gpio";
- gpios = <&gpio1 5 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -109,15 +111,15 @@
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ compatible = "fsl,imx6q-ventana-sgtl5000",
"fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
+ model = "sgtl5000-audio";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -137,7 +139,7 @@
&ecspi1 {
fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
@@ -153,7 +155,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
- phy-reset-gpios = <&gpio1 30 0>;
+ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -199,11 +201,6 @@
#gpio-cells = <2>;
};
- hwmon: gsc@29 {
- compatible = "gw,gsp";
- reg = <0x29>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -314,16 +311,6 @@
};
};
};
-
- pciswitch: pex8609@3f {
- compatible = "plx,pex8609";
- reg = <0x3f>;
- };
-
- pciclkgen: si52147@6b {
- compatible = "sil,si52147";
- reg = <0x6b>;
- };
};
&i2c3 {
@@ -345,51 +332,73 @@
VDDIO-supply = <&reg_3p3v>;
};
- hdmiin: adv7611@4c {
- compatible = "adi,adv7611";
- reg = <0x4c>;
- };
-
touchscreen: egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio7>;
- interrupts = <12 2>; /* gpio7_12 active low */
- wakeup-gpios = <&gpio7 12 0>;
+ interrupts = <12 2>;
+ wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
};
+};
- videoout: adv7393@2a {
- compatible = "adi,adv7393";
- reg = <0x2a>;
- };
+&ldb {
+ status = "okay";
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ status = "okay";
- videoin: adv7180@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
+ compatible = "marvell,sky2";
};
};
-&iomuxc {
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&reg_3p3v>;
+ status = "okay";
+};
+&iomuxc {
imx6q-gw5400-a {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
- MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
- MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
- >;
- };
pinctrl_audmux: audmuxgrp {
fsl,pins = <
@@ -397,6 +406,7 @@
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
>;
};
@@ -405,6 +415,7 @@
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
>;
};
@@ -429,6 +440,14 @@
>;
};
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
@@ -450,6 +469,19 @@
>;
};
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
@@ -474,6 +506,7 @@
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
>;
};
@@ -489,60 +522,3 @@
};
};
};
-
-&ldb {
- status = "okay";
-};
-
-&pcie {
- reset-gpio = <&gpio1 29 0>;
- status = "okay";
-
- eth1: sky2@8 { /* MAC/PHY on bus 8 */
- compatible = "marvell,sky2";
- };
-};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <&reg_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <&reg_usb_h1_vbus>;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- vmmc-supply = <&reg_3p3v>;
- status = "okay";
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 10:13:57 +0100