1 files changed, 15 insertions, 33 deletions

diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 2902e0d7971d..4680eec990f0 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,6 +1,6 @@
 / {
 	mbus {
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -19,7 +19,7 @@
 				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -36,7 +36,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -56,15 +56,8 @@
 	};
 	ocp@f1000000 {
 
-		pinctrl: pinctrl@10000 {
+		pinctrl: pin-controller@10000 {
 			compatible = "marvell,88f6282-pinctrl";
-			reg = <0x10000 0x20>;
-
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-							"mpp4", "mpp5", "mpp18", "mpp19";
-				marvell,function = "nand";
-			};
 
 			pmx_sata0: pmx-sata0 {
 				marvell,pins = "mpp5", "mpp21", "mpp23";
@@ -74,29 +67,16 @@
 				marvell,pins = "mpp4", "mpp20", "mpp22";
 				marvell,function = "sata1";
 			};
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
 
+			/*
+			 * Default I2C1 pinctrl setting on mpp36/mpp37,
+			 * overwrite marvell,pins on board level if required.
+			 */
 			pmx_twsi1: pmx-twsi1 {
 				marvell,pins = "mpp36", "mpp37";
 				marvell,function = "twsi1";
 			};
 
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
 			pmx_sdio: pmx-sdio {
 				marvell,pins = "mpp12", "mpp13", "mpp14",
 					       "mpp15", "mpp16", "mpp17";
@@ -104,20 +84,20 @@
 			};
 		};
 
-		thermal@10078 {
+		thermal: thermal@10078 {
 			compatible = "marvell,kirkwood-thermal";
 			reg = <0x10078 0x4>;
 			status = "okay";
 		};
 
-		rtc@10300 {
+		rtc: rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
 			clocks = <&gate_clk 7>;
 		};
 
-		i2c@11100 {
+		i2c1: i2c@11100 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11100 0x20>;
 			#address-cells = <1>;
@@ -125,10 +105,12 @@
 			interrupts = <32>;
 			clock-frequency = <100000>;
 			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
-		sata@80000 {
+		sata: sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
@@ -139,7 +121,7 @@
 			status = "disabled";
 		};
 
-		mvsdio@90000 {
+		sdio: mvsdio@90000 {
 			compatible = "marvell,orion-sdio";
 			reg = <0x90000 0x200>;
 			interrupts = <28>;