diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts')
-rw-r--r-- | arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts new file mode 100644 index 000000000000..fec7269088d1 --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon <d.rocipon@overkiz.com> + * Kevin Carli <k.carli@overkiz.com> + * Mickael Gardet <m.gardet@overkiz.com> + */ +/dts-v1/; +#include "at91-kizbox3_common.dtsi" + +/ { + model = "Overkiz KIZBOX3-HS"; + compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; + + led-controller-1 { + status = "okay"; + + led-1 { + status = "okay"; + }; + + led-2 { + status = "okay"; + }; + + led-3 { + status = "okay"; + }; + + led-4 { + status = "okay"; + }; + }; + + led-controller-2 { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_red + &pinctrl_led_white>; + status = "okay"; + + led-5 { + label = "pio:red:user"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + label = "pio:white:user"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default" , "default", "default", + "default", "default" ; + pinctrl-0 = <&pinctrl_key_gpio_default>; + pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; + pinctrl-2 = <&pinctrl_pio_io_boot + &pinctrl_pio_io_reset + &pinctrl_pio_io_test_radio>; + pinctrl-3 = <&pinctrl_pio_zbe_test_radio + &pinctrl_pio_zbe_rst>; + pinctrl-4 = <&pinctrl_pio_input>; + + switch-1 { + label = "SW1"; + gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + wakeup-source; + }; + + switch-2 { + label = "SW2"; + gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + switch-3 { + label = "SW3"; + gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + switch-7 { + label = "SW7"; + gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; + linux,code = <0x107>; + wakeup-source; + }; + + switch-8 { + label = "SW8"; + gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; + linux,code = <0x108>; + wakeup-source; + }; + }; + + gpios { + compatible = "gpio"; + status = "okay"; + + rf_on { + label = "rf on"; + gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + wifi_on { + label = "wifi on"; + gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_test_radio { + label = "zbe test radio"; + gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_rst { + label = "zbe rst"; + gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_reset { + label = "io reset"; + gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_test_radio { + label = "io test radio"; + gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_0 { + label = "io boot 0"; + gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_1 { + label = "io boot 1"; + gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + verbose_bootloader { + label = "verbose bootloader"; + gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; + input; + }; + + nail_bed_detection { + label = "nail bed detection"; + gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; + input; + }; + + id_usba { + label = "id usba"; + gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + input; + }; + }; +}; + +&pioA { + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PA22__GPIO>, + <PIN_PA24__GPIO>, + <PIN_PA26__GPIO>, + <PIN_PA29__GPIO>, + <PIN_PA18__GPIO>; + bias-disable; + }; + + pinctrl_gpio { + pinctrl_pio_rf: gpio_rf { + pinmux = <PIN_PC19__GPIO>; + bias-disable; + }; + pinctrl_pio_wifi: gpio_wifi { + pinmux = <PIN_PC20__GPIO>; + bias-disable; + }; + pinctrl_pio_io_boot: gpio_io_boot { + pinmux = + <PIN_PC11__GPIO>, + <PIN_PC17__GPIO>; + bias-disable; + }; + pinctrl_pio_io_test_radio: gpio_io_test_radio { + pinmux = <PIN_PC9__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { + pinmux = <PIN_PB21__GPIO>; + bias-disable; + }; + pinctrl_pio_zbe_rst: gpio_zbe_rst { + pinmux = <PIN_PB25__GPIO>; + bias-disable; + }; + /* stm32 reset must be open drain (internal pull up) */ + pinctrl_pio_io_reset: gpio_io_reset { + pinmux = <PIN_PB30__GPIO>; + bias-disable; + drive-open-drain; + output-low; + }; + pinctrl_pio_input: gpio_input { + pinmux = + <PIN_PB11__GPIO>, + <PIN_PB12__GPIO>, + <PIN_PC0__GPIO>; + bias-disable; + }; + }; + + pinctrl_leds { + pinctrl_led_red: led_red { + pinmux = <PIN_PB1__GPIO>; + bias-disable; + }; + pinctrl_led_white: led_white { + pinmux = <PIN_PB8__GPIO>; + bias-disable; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&flx0 { + status = "okay"; + + uart5: serial@200 { + status = "okay"; + }; +}; + +&flx3 { + status = "okay"; + uart8: serial@200 { + status = "okay"; + }; +}; + +&flx4 { + status = "okay"; + + i2c6: i2c@600 { + status = "okay"; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; |