summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap3-gta04.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/omap3-gta04.dtsi')
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi262
1 files changed, 234 insertions, 28 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ac830b917776..d5fe55392230 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -10,6 +10,7 @@
/dts-v1/;
#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "OMAP3 GTA04";
@@ -28,6 +29,7 @@
aliases {
display0 = &lcd;
+ display1 = &tv0;
};
/* fixed 26MHz oscillator */
@@ -42,12 +44,27 @@
aux-button {
label = "aux";
- linux,code = <169>;
+ linux,code = <KEY_PHONE>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
+ antenna-detect {
+ compatible = "gpio-keys";
+
+ gps_antenna_button: gps-antenna-button {
+ label = "GPS_EXT_ANT";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEIN_INSERT>;
+ gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
sound {
compatible = "ti,omap-twl4030";
ti,model = "gta04";
@@ -55,7 +72,7 @@
ti,mcbsp = <&mcbsp2>;
};
- /* GSM audio */
+ /* GSM audio */
sound_telephony {
compatible = "simple-audio-card";
simple-audio-card,name = "GTA04 voice";
@@ -78,7 +95,7 @@
#sound-dai-cells = <0>;
};
- spi_lcd {
+ spi_lcd: spi_lcd {
compatible = "spi-gpio";
#address-cells = <0x1>;
#size-cells = <0x0>;
@@ -131,7 +148,7 @@
};
tv0: connector {
- compatible = "svideo-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
@@ -143,7 +160,7 @@
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */
ports {
#address-cells = <1>;
@@ -169,6 +186,42 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
};
+
+ /* devconf0 setup for mcbsp1 clock pins */
+ pinmux_mcbsp1@48002274 {
+ compatible = "pinctrl-single";
+ reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_devconf0_pins>;
+ mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
+ };
+ };
+
+ /* devconf1 setup for tvout pins */
+ pinmux_tv_out@480022d8 {
+ compatible = "pinctrl-single";
+ reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x81>; /* TV out pin control */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tv_acbias_devconf1_pins>;
+ tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
+ };
+ };
};
&omap3_pmx_core {
@@ -220,14 +273,14 @@
>;
};
- backlight_pins: backlight_pins_pimnux {
+ backlight_pins: backlight_pins_pinmux {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
+ pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
@@ -265,6 +318,12 @@
>;
};
+ bmp085_pins: pinmux_bmp085_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+ >;
+ };
+
bma180_pins: pinmux_bma180_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
@@ -282,6 +341,78 @@
OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
>;
};
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+ >;
+ };
+
+ camera_pins: pinmux_camera_pins {
+ pinctrl-single,pins = <
+ /* set up parallel camera interface */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ /* mcbsp_clks is used as PENIRQ */
+ /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */
+ >;
+ };
+
+ mcbsp3_pins: pinmux_mcbsp3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */
+ >;
+ };
+
+ mcbsp4_pins: pinmux_mcbsp4_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */
+ >;
+ };
};
&omap3_pmx_core2 {
@@ -347,6 +478,8 @@
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bmp085_pins>;
interrupt-parent = <&gpio4>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
};
@@ -402,7 +535,7 @@
reg = <0x4>;
};
- wifi_reset: wifi_reset@6 {
+ wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
reg = <0x6>;
compatible = "gpio";
};
@@ -422,10 +555,19 @@
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio6>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
- gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
ti,x-plate-ohms = <600>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <640>;
+ touchscreen-max-pressure = <1000>;
+ touchscreen-fuzz-x = <3>;
+ touchscreen-fuzz-y = <8>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-y;
};
/* RFID EEPROM */
@@ -462,6 +604,7 @@
vmmc-supply = <&vmmc1>;
bus-width = <4>;
ti,non-removable;
+ broken-cd; /* hardware has no CD */
};
&mmc2 {
@@ -476,6 +619,19 @@
status = "disabled";
};
+#define BIT(x) (1 << (x))
+&twl_gpio {
+ /* pullups: BIT(2) */
+ ti,pullups = <BIT(2)>;
+ /*
+ * pulldowns:
+ * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+ BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
&twl_keypad {
status = "disabled";
};
@@ -493,6 +649,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&charger {
@@ -510,7 +667,7 @@
&vaux2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
+ regulator-always-on; /* we should never switch off while vio is on! */
};
/* camera */
@@ -531,6 +688,12 @@
regulator-max-microvolt = <3150000>;
};
+/* Needed to power the DPI pins */
+
+&vpll2 {
+ regulator-always-on;
+};
+
&dss {
pinctrl-names = "default";
pinctrl-0 = < &dss_dpi_pins >;
@@ -551,10 +714,14 @@
vdda-supply = <&vdac>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port {
+ reg = <0>;
venc_out: endpoint {
remote-endpoint = <&opa_in>;
- ti,channels = <2>;
+ ti,channels = <1>;
ti,invert-polarity;
};
};
@@ -569,27 +736,27 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "ham1";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
+ #address-cells = <1>;
+ #size-cells = <1>;
- gpmc,sync-clk-ps = <0>;
+ gpmc,device-width = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
+ gpmc,we-off-ns = <40>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,device-width = <2>;
-
- #address-cells = <1>;
- #size-cells = <1>;
+ gpmc,sync-clk-ps = <0>;
x-loader@0 {
label = "X-Loader";
@@ -598,28 +765,51 @@
bootloaders@80000 {
label = "U-Boot";
- reg = <0x80000 0x1e0000>;
+ reg = <0x80000 0x1c0000>;
};
- bootloaders_env@260000 {
+ bootloaders_env@240000 {
label = "U-Boot Env";
- reg = <0x260000 0x20000>;
+ reg = <0x240000 0x40000>;
};
kernel@280000 {
label = "Kernel";
- reg = <0x280000 0x400000>;
+ reg = <0x280000 0x600000>;
};
- filesystem@680000 {
+ filesystem@880000 {
label = "File System";
- reg = <0x680000 0xf980000>;
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
};
};
};
-&mcbsp2 {
- status = "okay";
+&mcbsp1 { /* FM Transceiver PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp4_pins>;
};
&hdqw1w {
@@ -627,6 +817,22 @@
pinctrl-0 = <&hdq_pins>;
};
-&mcbsp4 {
- status = "okay";
+/* image signal processor within OMAP3 SoC */
+&isp {
+ ports {
+ port@0 {
+ reg = <0>;
+ parallel_ep: endpoint {
+ ti,isp-clock-divisor = <1>;
+ ti,strobe-mode;
+ bus-width = <8>;/* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <1>; /* Active high */
+ data-active = <1>;/* Active high */
+ pclk-sample = <1>;/* Falling */
+ };
+ };
+ /* port@1 and port@2 are not used by GTA04 */
+ };
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 04:05:54 +0100