diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index 39ae2bc8cb08..8f5de029bca9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -39,6 +39,17 @@ }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + soc { rpm@108000 { regulators { @@ -74,6 +85,14 @@ bias-pull-down; }; + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + regulator-always-on; + }; + s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -121,6 +140,16 @@ bias-pull-down; }; + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; @@ -347,5 +376,45 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; }; }; + + riva-pil@3204000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + }; + + hdmi-tx@4a00000 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&vcc3v3>; + + hpd-gpio = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-phy@4a00400 { + status = "okay"; + core-vdda-supply = <&pm8921_hdmi_switch>; + }; + + mdp@5100000 { + status = "okay"; + + ports { + port@3 { + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; }; }; |