diff options
Diffstat (limited to 'arch/arm/boot/dts/sama5d3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sama5d3.dtsi | 428 |
1 files changed, 422 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5cdaba4cea86..3d5faf85f51b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> @@ -13,6 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/at91.h> / { model = "Atmel SAMA5D3 family SoC"; @@ -36,6 +37,7 @@ i2c2 = &i2c2; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <1>; @@ -56,6 +58,14 @@ reg = <0x20000000 0x8000000>; }; + clocks { + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -79,6 +89,8 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; }; spi0: spi@f0004000 { @@ -92,6 +104,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -101,6 +115,8 @@ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -108,6 +124,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; i2c0: i2c@f0014000 { @@ -121,6 +139,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -135,6 +154,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -144,6 +164,8 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -153,6 +175,17 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + pwm0: pwm@f002c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf002c000 0x300>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; status = "disabled"; }; @@ -174,6 +207,8 @@ status = "disabled"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; }; spi1: spi@f8008000 { @@ -187,6 +222,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -196,6 +233,8 @@ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -219,6 +258,9 @@ &pinctrl_adc0_ad10 &pinctrl_adc0_ad11 >; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channel-base = <0x50>; atmel,adc-channels-used = <0xfff>; atmel,adc-drdy-mask = <0x1000000>; @@ -272,8 +314,11 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi2_clk>; status = "disabled"; }; @@ -283,6 +328,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -292,25 +339,41 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; sha@f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; }; aes@f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; }; tdes@f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; }; dma0: dma-controller@ffffe600 { @@ -318,6 +381,8 @@ reg = <0xffffe600 0x200>; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; dma1: dma-controller@ffffe800 { @@ -325,6 +390,8 @@ reg = <0xffffe800 0x200>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; }; ramc0: ramc@ffffea00 { @@ -338,6 +405,8 @@ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&dbgu_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -443,6 +512,14 @@ }; }; + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ + }; + }; + isi { pinctrl_isi: isi-0 { atmel,pins = @@ -626,6 +703,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff400 { @@ -636,6 +714,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff600 { @@ -646,6 +725,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; pioD: gpio@fffff800 { @@ -656,6 +736,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioD_clk>; }; pioE: gpio@fffffa00 { @@ -666,12 +747,334 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioE_clk>; }; }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,sama5d3-pmc"; reg = <0xfffffc00 0x120>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCS>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,sama5d3-clk-pll"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <8000000 50000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 166000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + dbgu_clk: dbgu_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <6>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <7>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <8>; + }; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <9>; + }; + + pioE_clk: pioE_clk { + #clock-cells = <0>; + reg = <10>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <12>; + atmel,clk-output-range = <0 66000000>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <13>; + atmel,clk-output-range = <0 66000000>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <14>; + atmel,clk-output-range = <0 66000000>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <15>; + atmel,clk-output-range = <0 66000000>; + }; + + twi0_clk: twi0_clk { + reg = <18>; + #clock-cells = <0>; + atmel,clk-output-range = <0 16625000>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <19>; + atmel,clk-output-range = <0 16625000>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <20>; + atmel,clk-output-range = <0 16625000>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <22>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <24>; + atmel,clk-output-range = <0 133000000>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <25>; + atmel,clk-output-range = <0 133000000>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <26>; + atmel,clk-output-range = <0 133000000>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <28>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <29>; + atmel,clk-output-range = <0 66000000>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <30>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <31>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <32>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <33>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <37>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 66000000>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <39>; + atmel,clk-output-range = <0 66000000>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <42>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <43>; + }; + + tdes_clk: tdes_clk { + #clock-cells = <0>; + reg = <44>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <45>; + }; + + fuse_clk: fuse_clk { + #clock-cells = <0>; + reg = <48>; + }; + }; }; rstc@fffffe00 { @@ -683,11 +1086,17 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&mck>; }; watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + atmel,watchdog-type = "hardware"; + atmel,reset-type = "all"; + atmel,dbg-halt; + atmel,idle-halt; status = "disabled"; }; @@ -705,6 +1114,8 @@ reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; status = "disabled"; ep0 { @@ -817,6 +1228,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -824,6 +1238,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; |