summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/st/ste-dbx5x0.dtsi')
-rw-r--r--arch/arm/boot/dts/st/ste-dbx5x0.dtsi1238
1 files changed, 1238 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
new file mode 100644
index 000000000000..d5d88771ef97
--- /dev/null
+++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi
@@ -0,0 +1,1238 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/ste-db8500-clkout.h>
+#include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
+#include <dt-bindings/arm/ux500_pm_domains.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* This stablilizes the device enumeration */
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ };
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "ste,dbx500-smp";
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ };
+ CPU0: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x300>;
+ clocks = <&prcmu_clk PRCMU_ARMSS>;
+ clock-names = "cpu";
+ clock-latency = <20000>;
+ #cooling-cells = <2>;
+ };
+ CPU1: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x301>;
+ };
+ };
+
+ thermal-zones {
+ /*
+ * Thermal zone for the SoC, using the thermal sensor in the
+ * PRCMU for temperature and the cpufreq driver for passive
+ * cooling.
+ */
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <250>;
+ /*
+ * This sensor fires interrupts to update the thermal
+ * zone, so no polling is needed.
+ */
+ polling-delay = <0>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu-crit {
+ temperature = <85000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ trip = <&cpu_alert>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <100>;
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "stericsson,db8500", "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ /*
+ * 640KB ESRAM (embedded static random access memory), divided
+ * into 5 banks of 128 KB each. This is a fast memory usually
+ * used by different accelerators. We group these according to
+ * their power domains: ESRAM0 (always on) ESRAM 1+2 and
+ * ESRAM 3+4.
+ */
+ sram@40000000 {
+ /* The first (always on) ESRAM 0, 128 KB */
+ compatible = "mmio-sram";
+ reg = <0x40000000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000000 0x20000>;
+
+ sram@0 {
+ compatible = "stericsson,u8500-esram";
+ reg = <0x0 0x10000>;
+ pool;
+ };
+ lcpa: sram@10000 {
+ /*
+ * This eSRAM is used by the DMA40 DMA controller
+ * for Logical Channel Paramers (LCP), the address
+ * where these parameters are stored is called "LCPA".
+ * This is addressed directly by the driver so no
+ * pool is used.
+ */
+ compatible = "stericsson,u8500-esram";
+ label = "DMA40-LCPA";
+ reg = <0x10000 0x800>;
+ };
+ sram@10800 {
+ compatible = "stericsson,u8500-esram";
+ reg = <0x10800 0xf800>;
+ pool;
+ };
+ };
+ sram@40020000 {
+ /* ESRAM 1+2, 256 KB */
+ compatible = "mmio-sram";
+ reg = <0x40020000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40020000 0x40000>;
+ };
+ sram@40060000 {
+ /* ESRAM 3+4, 256 KB */
+ compatible = "mmio-sram";
+ reg = <0x40060000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40060000 0x40000>;
+
+ lcla: sram@20000 {
+ /*
+ * This eSRAM is used by the DMA40 DMA controller
+ * for Logical Channel Logical Addresses (LCLA), the address
+ * where these parameters are stored is called "LCLA".
+ * This is addressed directly by the driver so no
+ * pool is used.
+ */
+ compatible = "stericsson,u8500-esram";
+ label = "DMA40-LCLA";
+ reg = <0x20000 0x2000>;
+ };
+ };
+
+ ptm@801ae000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x801ae000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ cpu = <&CPU0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm@801af000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x801af000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ cpu = <&CPU1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
+ };
+
+ funnel@801a6000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x801a6000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ out-ports {
+ port {
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "atclk";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ replicator_in_port0: endpoint {
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ tpiu@80190000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x80190000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+ etb@801a4000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0x801a4000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller@a0411000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xa0411000 0x1000>,
+ <0xa0410100 0x100>;
+ };
+
+ scu@a0410000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xa0410000 0x100>;
+ };
+
+ /*
+ * The backup RAM is used for retention during sleep
+ * and various things like spin tables
+ */
+ backupram@80150000 {
+ compatible = "ste,dbx500-backupram";
+ reg = <0x80150000 0x2000>;
+ };
+
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xa0412000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pm_domains: pm_domains0 {
+ compatible = "stericsson,ux500-pm-domains";
+ #power-domain-cells = <1>;
+ };
+
+ clocks {
+ compatible = "stericsson,u8500-clks";
+ /*
+ * Registers for the CLKRST block on peripheral
+ * groups 1, 2, 3, 5, 6,
+ */
+ reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+ <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+ <0xa03cf000 0x1000>;
+
+ prcmu_clk: prcmu-clock {
+ #clock-cells = <1>;
+ };
+
+ prcc_pclk: prcc-periph-clock {
+ #clock-cells = <2>;
+ };
+
+ prcc_kclk: prcc-kernel-clock {
+ #clock-cells = <2>;
+ };
+
+ prcc_reset: prcc-reset-controller {
+ #reset-cells = <2>;
+ };
+
+ rtc_clk: rtc32k-clock {
+ #clock-cells = <0>;
+ };
+
+ smp_twd_clk: smp-twd-clock {
+ #clock-cells = <0>;
+ };
+
+ clkout_clk: clkout-clock {
+ /* Cell 1 id, cell 2 source, cell 3 div */
+ #clock-cells = <3>;
+ };
+ };
+
+ mtu@a03c6000 {
+ /* Nomadik System Timer */
+ compatible = "st,nomadik-mtu";
+ reg = <0xa03c6000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+ clock-names = "timclk", "apb_pclk";
+ };
+
+ timer@a0410600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xa0410600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+
+ clocks = <&smp_twd_clk>;
+ };
+
+ watchdog@a0410620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0xa0410620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&smp_twd_clk>;
+ };
+
+ rtc@80154000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x80154000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&rtc_clk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio0: gpio@8012e000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8012e000 0x80>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ clocks = <&prcc_pclk 1 9>;
+ };
+
+ gpio1: gpio@8012e080 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8012e080 0x80>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
+ gpio-ranges = <&pinctrl 0 32 5>;
+ clocks = <&prcc_pclk 1 9>;
+ };
+
+ gpio2: gpio@8000e000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e000 0x80>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ clocks = <&prcc_pclk 3 8>;
+ };
+
+ gpio3: gpio@8000e080 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e080 0x80>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
+ gpio-ranges = <&pinctrl 0 96 2>;
+ clocks = <&prcc_pclk 3 8>;
+ };
+
+ gpio4: gpio@8000e100 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e100 0x80>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <4>;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ clocks = <&prcc_pclk 3 8>;
+ };
+
+ gpio5: gpio@8000e180 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e180 0x80>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <5>;
+ gpio-ranges = <&pinctrl 0 160 12>;
+ clocks = <&prcc_pclk 3 8>;
+ };
+
+ gpio6: gpio@8011e000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8011e000 0x80>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <6>;
+ gpio-ranges = <&pinctrl 0 192 32>;
+ clocks = <&prcc_pclk 2 11>;
+ };
+
+ gpio7: gpio@8011e080 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8011e080 0x80>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <7>;
+ gpio-ranges = <&pinctrl 0 224 7>;
+ clocks = <&prcc_pclk 2 11>;
+ };
+
+ gpio8: gpio@a03fe000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0xa03fe000 0x80>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <8>;
+ gpio-ranges = <&pinctrl 0 256 12>;
+ clocks = <&prcc_pclk 5 1>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "stericsson,db8500-pinctrl";
+ nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
+ <&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
+ <&gpio8>;
+ prcm = <&prcmu>;
+ };
+
+ usb_per5@a03e0000 {
+ compatible = "stericsson,db8500-musb";
+ reg = <0xa03e0000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+
+ dr_mode = "otg";
+
+ dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+ <&dma 38 0 0x0>, /* Logical - MemToDev */
+ <&dma 37 0 0x2>, /* Logical - DevToMem */
+ <&dma 37 0 0x0>, /* Logical - MemToDev */
+ <&dma 36 0 0x2>, /* Logical - DevToMem */
+ <&dma 36 0 0x0>, /* Logical - MemToDev */
+ <&dma 19 0 0x2>, /* Logical - DevToMem */
+ <&dma 19 0 0x0>, /* Logical - MemToDev */
+ <&dma 18 0 0x2>, /* Logical - DevToMem */
+ <&dma 18 0 0x0>, /* Logical - MemToDev */
+ <&dma 17 0 0x2>, /* Logical - DevToMem */
+ <&dma 17 0 0x0>, /* Logical - MemToDev */
+ <&dma 16 0 0x2>, /* Logical - DevToMem */
+ <&dma 16 0 0x0>, /* Logical - MemToDev */
+ <&dma 39 0 0x2>, /* Logical - DevToMem */
+ <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+ dma-names = "iep_1_9", "oep_1_9",
+ "iep_2_10", "oep_2_10",
+ "iep_3_11", "oep_3_11",
+ "iep_4_12", "oep_4_12",
+ "iep_5_13", "oep_5_13",
+ "iep_6_14", "oep_6_14",
+ "iep_7_15", "oep_7_15",
+ "iep_8", "oep_8";
+
+ clocks = <&prcc_pclk 5 0>;
+ };
+
+ dma: dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+ reg = <0x801C0000 0x1000>;
+ reg-names = "base";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ sram = <&lcpa>, <&lcla>;
+
+ #dma-cells = <3>;
+ memcpy-channels = <56 57 58 59 60>;
+
+ clocks = <&prcmu_clk PRCMU_DMACLK>;
+ };
+
+ prcmu: prcmu@80157000 {
+ compatible = "stericsson,db8500-prcmu", "syscon";
+ reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ prcmu-timer-4@80157450 {
+ compatible = "stericsson,db8500-prcmu-timer-4";
+ reg = <0x80157450 0xC>;
+ };
+
+ thermal: thermal@801573c0 {
+ compatible = "stericsson,db8500-thermal";
+ reg = <0x801573c0 0x40>;
+ interrupt-parent = <&prcmu>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+ #thermal-sensor-cells = <0>;
+ };
+
+ db8500-prcmu-regulators {
+ compatible = "stericsson,db8500-prcmu-regulator";
+
+ // DB8500_REGULATOR_VAPE
+ db8500_vape_reg: db8500_vape {
+ regulator-always-on;
+ };
+
+ // DB8500_REGULATOR_VARM
+ db8500_varm_reg: db8500_varm {
+ };
+
+ // DB8500_REGULATOR_VMODEM
+ db8500_vmodem_reg: db8500_vmodem {
+ };
+
+ // DB8500_REGULATOR_VPLL
+ db8500_vpll_reg: db8500_vpll {
+ };
+
+ // DB8500_REGULATOR_VSMPS1
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ };
+
+ // DB8500_REGULATOR_VSMPS2
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ };
+
+ // DB8500_REGULATOR_VSMPS3
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ };
+
+ // DB8500_REGULATOR_VRF1
+ db8500_vrf1_reg: db8500_vrf1 {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SVAMMDSP
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SVAPIPE
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SIAMMDSP
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SIAPIPE
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ };
+
+ // DB8500_REGULATOR_SWITCH_SGA
+ db8500_sga_reg: db8500_sga {
+ vin-supply = <&db8500_vape_reg>;
+ };
+
+ // DB8500_REGULATOR_SWITCH_B2R2_MCDE
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ vin-supply = <&db8500_vape_reg>;
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM12
+ db8500_esram12_reg: db8500_esram12 {
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM12RET
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM34
+ db8500_esram34_reg: db8500_esram34 {
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM34RET
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ };
+ };
+ };
+
+ i2c0: i2c@80004000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+ reg = <0x80004000 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+ clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+ clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@80122000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+ reg = <0x80122000 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+
+ clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+ clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@80128000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+ reg = <0x80128000 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+
+ clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+ clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C2>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@80110000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+ reg = <0x80110000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+
+ clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+ clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_I2C3>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@8012a000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+ reg = <0x8012a000 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+
+ clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+ clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C4>;
+
+ status = "disabled";
+ };
+
+ ssp0: spi@80002000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80002000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+ clock-names = "sspclk", "apb_pclk";
+ dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+ <&dma 8 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP0>;
+
+ status = "disabled";
+ };
+
+ ssp1: spi@80003000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80003000 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+ clock-names = "sspclk", "apb_pclk";
+ dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+ <&dma 9 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP1>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@8011a000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x8011a000 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+ clock-names = "sspclk", "apb_pclk";
+ dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+ <&dma 0 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
+ };
+
+ spi1: spi@80112000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80112000 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+ clock-names = "sspclk", "apb_pclk";
+ dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+ <&dma 35 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@80111000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80111000 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+ clock-names = "sspclk", "apb_pclk";
+ dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+ <&dma 33 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+
+ status = "disabled";
+ };
+
+ spi3: spi@80129000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80129000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+ clock-names = "sspclk", "apb_pclk";
+ dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+ <&dma 40 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SPI3>;
+
+ status = "disabled";
+ };
+
+ serial0: serial@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+ <&dma 13 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+ clock-names = "uart", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART0>;
+
+ status = "disabled";
+ };
+
+ serial1: serial@80121000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80121000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+ <&dma 12 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+ clock-names = "uart", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART1>;
+
+ status = "disabled";
+ };
+
+ serial2: serial@80007000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80007000 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+ <&dma 11 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+ clock-names = "uart", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_UART2>;
+
+ status = "disabled";
+ };
+
+ mmc@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+ <&dma 29 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+ clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SDI0>;
+
+ status = "disabled";
+ };
+
+ mmc@80118000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80118000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+ <&dma 32 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+ clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI1>;
+
+ status = "disabled";
+ };
+
+ mmc@80005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80005000 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+ <&dma 28 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+ clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI2>;
+
+ status = "disabled";
+ };
+
+ mmc@80119000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80119000 0x1000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
+ <&dma 41 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+ clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI3>;
+
+ status = "disabled";
+ };
+
+ mmc@80114000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80114000 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+ <&dma 42 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+ clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI4>;
+
+ status = "disabled";
+ };
+
+ mmc@80008000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80008000 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
+ <&dma 43 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+ clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI5>;
+
+ status = "disabled";
+ };
+
+ sound {
+ compatible = "stericsson,snd-soc-mop500";
+ stericsson,cpu-dai = <&msp1 &msp3>;
+ };
+
+ msp0: msp@80123000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80123000 0x1000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ v-ape-supply = <&db8500_vape_reg>;
+
+ dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
+ <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+ clock-names = "msp", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP0>;
+
+ status = "disabled";
+ };
+
+ msp1: msp@80124000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80124000 0x1000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ v-ape-supply = <&db8500_vape_reg>;
+
+ /* This DMA channel only exist on DB8500 v1 */
+ dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
+ dma-names = "tx";
+
+ clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+ clock-names = "msp", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP1>;
+
+ status = "disabled";
+ };
+
+ // HDMI sound
+ msp2: msp@80117000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80117000 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ v-ape-supply = <&db8500_vape_reg>;
+
+ dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
+ <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
+ HighPrio - Fixed */
+ dma-names = "rx", "tx";
+
+ clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+ clock-names = "msp", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_MSP2>;
+
+ status = "disabled";
+ };
+
+ msp3: msp@80125000 {
+ compatible = "stericsson,ux500-msp-i2s";
+ reg = <0x80125000 0x1000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ v-ape-supply = <&db8500_vape_reg>;
+
+ /* This DMA channel only exist on DB8500 v2 */
+ dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
+ dma-names = "rx";
+
+ clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+ clock-names = "msp", "apb_pclk";
+ resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP3>;
+
+ status = "disabled";
+ };
+
+ external-bus@50000000 {
+ compatible = "simple-bus";
+ reg = <0x50000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x4000000>;
+ status = "disabled";
+ };
+
+ gpu@a0300000 {
+ /*
+ * This block is referred to as "Smart Graphics Adapter SGA500"
+ * in documentation but is in practice a pretty straight-forward
+ * MALI-400 GPU block.
+ */
+ compatible = "stericsson,db8500-mali", "arm,mali-400";
+ reg = <0xa0300000 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "combined";
+ clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
+ clock-names = "bus", "core";
+ mali-supply = <&db8500_sga_reg>;
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ };
+
+ mcde@a0350000 {
+ compatible = "ste,mcde";
+ reg = <0xa0350000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ epod-supply = <&db8500_b2r2_mcde_reg>;
+ clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
+ <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
+ <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
+ clock-names = "mcde", "lcd", "hdmi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ dsi0: dsi@a0351000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0351000 0x1000>;
+ clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+ clock-names = "hs", "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ dsi1: dsi@a0352000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0352000 0x1000>;
+ clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+ clock-names = "hs", "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ dsi2: dsi@a0353000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0353000 0x1000>;
+ /* This DSI port only has the Low Power / Energy Save clock */
+ clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+ clock-names = "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cryp@a03cb000 {
+ compatible = "stericsson,ux500-cryp";
+ reg = <0xa03cb000 0x1000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&prcc_pclk 6 1>;
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ };
+
+ hash@a03c2000 {
+ compatible = "stericsson,ux500-hash";
+ reg = <0xa03c2000 0x1000>;
+ clocks = <&prcc_pclk 6 2>;
+ power-domains = <&pm_domains DOMAIN_VAPE>;
+ };
+ };
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 15:10:50 +0100