1 files changed, 4 insertions, 43 deletions

diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index b8b79c0e9ee0..8e724c52feff 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -58,8 +58,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bpi_m2>;
 
 		blue {
 			label = "bpi-m2:blue:usr";
@@ -79,8 +77,6 @@
 
 	mmc2_pwrseq: mmc2_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
 	};
 };
@@ -95,7 +91,7 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_dldo1>;
@@ -111,26 +107,20 @@
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	bias-pull-up;
-};
-
 &mmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
+	pinctrl-0 = <&mmc2_4bit_pins>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
@@ -146,10 +136,6 @@
 	};
 };
 
-&mmc2_pins_a {
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -167,31 +153,6 @@
 	};
 };
 
-&pio {
-	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
-		pins = "PA21";
-		function = "gpio_out";
-	};
-
-	led_pins_bpi_m2: led_pins@0 {
-		pins = "PG5", "PG10", "PG11";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
-		pins = "PA4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
-&r_pio {
-	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
-		pins = "PL8";
-		function = "gpio_out";
-	};
-};
-
 #include "axp22x.dtsi"
 
 &reg_aldo1 {
@@ -291,7 +252,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };