diff options
Diffstat (limited to 'arch/arm/boot/dts/sun9i-a80.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sun9i-a80.dtsi | 42 |
1 files changed, 22 insertions, 20 deletions
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 1d900f591d5f..ce4fa6706d06 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -387,16 +387,16 @@ usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_clocks CLK_USB1_HSIC>, + clocks = <&usb_clocks CLK_USB1_PHY>, <&usb_clocks CLK_USB_HSIC>, - <&usb_clocks CLK_USB1_PHY>; - clock-names = "hsic_480M", + <&usb_clocks CLK_USB1_HSIC>; + clock-names = "phy", "hsic_12M", - "phy"; - resets = <&usb_clocks RST_USB1_HSIC>, - <&usb_clocks RST_USB1_PHY>; - reset-names = "hsic", - "phy"; + "hsic_480M"; + resets = <&usb_clocks RST_USB1_PHY>, + <&usb_clocks RST_USB1_HSIC>; + reset-names = "phy", + "hsic"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ @@ -429,16 +429,16 @@ usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_clocks CLK_USB2_HSIC>, + clocks = <&usb_clocks CLK_USB2_PHY>, <&usb_clocks CLK_USB_HSIC>, - <&usb_clocks CLK_USB2_PHY>; - clock-names = "hsic_480M", + <&usb_clocks CLK_USB2_HSIC>; + clock-names = "phy", "hsic_12M", - "phy"; - resets = <&usb_clocks RST_USB2_HSIC>, - <&usb_clocks RST_USB2_PHY>; - reset-names = "hsic", - "phy"; + "hsic_480M"; + resets = <&usb_clocks RST_USB2_PHY>, + <&usb_clocks RST_USB2_HSIC>; + reset-names = "phy", + "hsic"; status = "disabled"; #phy-cells = <0>; }; @@ -530,9 +530,7 @@ compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ccu CLK_BUS_MMC>; - clock-names = "ahb"; resets = <&ccu RST_BUS_MMC>; - reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; clock-output-names = "mmc0_config", "mmc1_config", @@ -880,8 +878,12 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; clock-names = "ahb", "tcon-ch0"; - resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; - reset-names = "lcd", "edp"; + resets = <&ccu RST_BUS_LCD0>, + <&ccu RST_BUS_EDP>, + <&ccu RST_BUS_LVDS>; + reset-names = "lcd", + "edp", + "lvds"; clock-output-names = "tcon0-pixel-clock"; #clock-cells = <0>; |