diff options
Diffstat (limited to 'arch/arm/boot/dts/tegra30-colibri-eval-v3.dts')
| -rw-r--r-- | arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 130 |
1 files changed, 57 insertions, 73 deletions
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 16e1f387aa6d..5965150ecdd2 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -1,15 +1,17 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra30-colibri.dtsi" / { model = "Toradex Colibri T30 on Colibri Evaluation Board"; - compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30"; + compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", + "nvidia,tegra30"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; - rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/i2c@7000d000/pmic@2d"; rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartb; @@ -27,22 +29,25 @@ nvidia,panel = <&panel>; }; }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; + /* Colibri UART-A */ serial@70006000 { status = "okay"; }; + /* Colibri UART-C */ serial@70006040 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Colibri UART-B */ serial@70006300 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -65,8 +70,12 @@ }; }; + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ - hdmiddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -74,18 +83,17 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <25000000>; - can0: can@0 { + + can@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>; + /* CAN_INT */ + interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; - }; - spidev0: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <25000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; }; }; @@ -93,19 +101,19 @@ sdhci@78000200 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ no-1-8-v; }; /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ usb@7d000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usbc_vbus_reg>; + vbus-supply = <®_usbc_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ @@ -115,28 +123,23 @@ usb-phy@7d008000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; backlight: backlight { compatible = "pwm-backlight"; - - /* PWM<A> */ - pwms = <&pwm 0 5000000>; brightness-levels = <255 128 64 32 16 8 4 0>; default-brightness-level = <6>; /* BL_ON */ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ }; - clocks { - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + clk16m: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; }; gpio-keys { @@ -157,58 +160,39 @@ * edt,et070080dh6: EDT 7.0" LCD TFT */ compatible = "edt,et057090dhu", "simple-panel"; - backlight = <&backlight>; + power-supply = <®_3v3>; }; - pwmleds { - compatible = "pwm-leds"; - - pwmb { - label = "PWM<B>"; - pwms = <&pwm 1 19600>; - max-brightness = <255>; - }; - pwmc { - label = "PWM<C>"; - pwms = <&pwm 2 19600>; - max-brightness = <255>; - }; - pwmd { - label = "PWM<D>"; - pwms = <&pwm 3 19600>; - max-brightness = <255>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; - regulators { - sys_5v0_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - usbc_vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usbc_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&sys_5v0_reg>; - }; + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; - /* USBH_PEN */ - usbh_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - vin-supply = <&sys_5v0_reg>; - }; + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; }; }; |