diff options
Diffstat (limited to 'arch/arm/boot/dts')
30 files changed, 1520 insertions, 183 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a89..13575103594d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5420-smdk5420.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -159,6 +160,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ hrefprev60.dtb \ hrefv60plus.dtb \ ccu9540.dtb +dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 359694c78918..3f94fe8e3706 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -19,7 +19,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { interrupt-parent = <&gic>; @@ -160,6 +160,8 @@ reg = <0x13400000 0x10000>; interrupts = <0 94 0>; samsung,power-domain = <&pd_mfc>; + clocks = <&clock 170>, <&clock 273>; + clock-names = "sclk_mfc", "mfc"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 524b90846df5..382d8c7e2906 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -41,6 +41,10 @@ enable-active-high; }; + tmu@100C0000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; @@ -83,6 +87,150 @@ status = "okay"; }; + i2c@13860000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -143,4 +291,25 @@ clock-frequency = <24000000>; }; }; + + fimd@11c00000 { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 55a2efb763d1..553bceae8967 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -330,6 +330,95 @@ samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_en: lcd-en { + samsung,pins = "gpe3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@11000000 { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 91332b72acf5..9c01b718d29d 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 9a14484c7bb1..94eebffe3044 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 345cdb51dcb7..889cdada1ce9 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 54710de82908..b7f358a93bcb 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,8 +19,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4210-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; @@ -112,12 +112,17 @@ interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; }; g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c0f60f49cea6..6f34d7f6ba7e 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4212"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 53bc8bf77984..46c678ee119c 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; @@ -43,6 +43,7 @@ #size-cells = <0>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; status = "okay"; num-slots = <1>; @@ -78,6 +79,7 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; status = "okay"; }; @@ -108,4 +110,199 @@ clock-frequency = <24000000>; }; }; + + i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: pmic@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 1c21bad32ca9..7993641cb32a 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -36,6 +36,72 @@ enable-active-high; }; + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <2>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_home { + keypad,row = <0>; + keypad,column = <0>; + linux,code = <102>; + }; + + key_down { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <108>; + }; + + key_up { + keypad,row = <1>; + keypad,column = <0>; + linux,code = <103>; + }; + + key_menu { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <139>; + }; + + key_back { + keypad,row = <2>; + keypad,column = <0>; + linux,code = <158>; + }; + + key_enter { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <28>; + }; + }; + + g2d@10800000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index dd564310d4a5..ad316a1ee9e0 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; @@ -31,8 +31,91 @@ status = "okay"; }; - g2d@10800000 { + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + keypad@100A0000 { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; + + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; + + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; + + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; + }; + + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; + }; + + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; + }; + + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; + }; + + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; + }; }; sdhci@12530000 { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 270b389e0a1b..e743e677a9e2 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4412"; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 099cec79e2ae..704290f7c5c0 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -778,62 +778,6 @@ samsung,pin-drv = <3>; }; - keypad_col0: keypad-col0 { - samsung,pins = "gpl2-0"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col1: keypad-col1 { - samsung,pins = "gpl2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col2: keypad-col2 { - samsung,pins = "gpl2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col3: keypad-col3 { - samsung,pins = "gpl2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col4: keypad-col4 { - samsung,pins = "gpl2-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col5: keypad-col5 { - samsung,pins = "gpl2-5"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col6: keypad-col6 { - samsung,pins = "gpl2-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - keypad_col7: keypad-col7 { - samsung,pins = "gpl2-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - cam_port_b: cam-port-b { samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index e3380a7a285c..01da194ba329 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -17,8 +17,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4x12-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" / { aliases { @@ -28,14 +28,6 @@ pinctrl3 = &pinctrl_3; }; - combiner:interrupt-controller@10440000 { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; - }; - clock: clock-controller@0x10030000 { compatible = "samsung,exynos4412-clock"; reg = <0x10030000 0x20000>; @@ -77,6 +69,8 @@ compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi new file mode 100644 index 000000000000..f65e124c04a6 --- /dev/null +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -0,0 +1,111 @@ +/* + * Samsung's Exynos5 SoC series common device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular + * SoCs from Exynos5 series can include this file and provide values for SoCs + * specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic:interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + dwmmc_0: dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc_1: dwmmc1@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc_2: dwmmc2@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; + + serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; + + serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; + + serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + status = "disabled"; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 02cfc76d002f..abc7272c7afd 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -449,4 +449,35 @@ clock-frequency = <24000000>; }; }; + + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; + + fimd: fimd@14400000 { + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; + }; + + rtc { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb34c0a..e9cdee385092 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -553,6 +553,13 @@ samsung,pin-pud = <0>; samaung,pin-drv = <0>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; }; pinctrl@13400000 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 3e0c792e2767..35a66dee4011 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; @@ -37,6 +37,30 @@ }; }; + vdd:fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + dbvdd:fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + spkvdd:fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; @@ -47,8 +71,17 @@ }; wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; }; @@ -224,6 +257,9 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; }; display-timings { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index d449feb7e143..e79331dba12d 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" -/include/ "cros5250-common.dtsi" +#include "exynos5250.dtsi" +#include "cros5250-common.dtsi" / { model = "Google Snow"; @@ -171,6 +171,10 @@ }; }; + rtc { + status = "okay"; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0673524238a6..d04ab0ad791a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,12 +17,13 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" -/include/ "exynos5250-pinctrl.dtsi" +#include "exynos5.dtsi" +#include "exynos5250-pinctrl.dtsi" + +#include <dt-bindings/clk/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; - interrupt-parent = <&gic>; aliases { spi0 = &spi_0; @@ -51,9 +52,20 @@ pinctrl3 = &pinctrl_3; }; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; }; pd_gsc: gsc-power-domain@0x10044000 { @@ -72,15 +84,10 @@ #clock-cells = <1>; }; - gic:interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; }; timer { @@ -91,22 +98,6 @@ <1 10 0xf08>; }; - combiner:interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; - mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -168,9 +159,6 @@ }; watchdog { - compatible = "samsung,s3c2410-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; clocks = <&clock 336>; clock-names = "watchdog"; }; @@ -183,12 +171,8 @@ }; rtc { - compatible = "samsung,s3c6410-rtc"; - reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; clocks = <&clock 337>; clock-names = "rtc"; - status = "disabled"; }; tmu@10060000 { @@ -200,33 +184,21 @@ }; serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; clocks = <&clock 289>, <&clock 146>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; clocks = <&clock 290>, <&clock 147>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; clocks = <&clock 291>, <&clock 148>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; clocks = <&clock 292>, <&clock 149>; clock-names = "uart", "clk_uart_baud0"; }; @@ -405,31 +377,19 @@ }; dwmmc_0: dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 280>, <&clock 139>; clock-names = "biu", "ciu"; }; dwmmc_1: dwmmc1@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 281>, <&clock 140>; clock-names = "biu", "ciu"; }; dwmmc_2: dwmmc2@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 282>, <&clock 141>; clock-names = "biu", "ciu"; }; @@ -451,6 +411,10 @@ &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; @@ -465,6 +429,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + clocks = <&clock 307>, <&clock 157>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; }; @@ -475,10 +441,42 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + clocks = <&clock 308>, <&clock 158>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; }; + usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock 286>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + usb-phy = <&usb2_phy &usb3_phy>; + }; + }; + + usb3_phy: usbphy@12100000 { + compatible = "samsung,exynos5250-usb3phy"; + reg = <0x12100000 0x100>; + clocks = <&clock 1>, <&clock 286>; + clock-names = "ext_xtal", "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>; + }; + }; + usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; @@ -497,7 +495,7 @@ clock-names = "usbhost"; }; - usbphy@12130000 { + usb2_phy: usbphy@12130000 { compatible = "samsung,exynos5250-usb2phy"; reg = <0x12130000 0x100>; clocks = <&clock 1>, <&clock 285>; @@ -621,6 +619,8 @@ reg = <0x145b0000 0x1000>; interrupts = <10 3>; interrupt-parent = <&combiner>; + clocks = <&clock 342>; + clock-names = "dp"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts new file mode 100644 index 000000000000..08607df6a180 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -0,0 +1,33 @@ +/* + * SAMSUNG SMDK5420 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5420.dtsi" + +/ { + model = "Samsung SMDK5420 board based on EXYNOS5420"; + compatible = "samsung,smdk5420", "samsung,exynos5420"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200 init=/linuxrc"; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi new file mode 100644 index 000000000000..8474d63fc5e5 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -0,0 +1,103 @@ +/* + * SAMSUNG EXYNOS5420 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. + * EXYNOS5420 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5.dtsi" +/ { + compatible = "samsung,exynos5420"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clock-frequency = <1800000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + }; + }; + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5420-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <1>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; + clocks = <&clock 1>, <&clock 315>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>; + }; + }; + + serial@12C00000 { + clocks = <&clock 257>, <&clock 128>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C10000 { + clocks = <&clock 258>, <&clock 129>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C20000 { + clocks = <&clock 259>, <&clock 130>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C30000 { + clocks = <&clock 260>, <&clock 131>; + clock-names = "uart", "clk_uart_baud0"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index ef747b52b674..5b22508050da 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -10,14 +10,14 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SD5v1 board based on EXYNOS5440"; compatible = "samsung,sd5v1", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index d55042beb5c5..f32cd77930a6 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -10,18 +10,53 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; compatible = "samsung,ssdk5440", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; - spi { - status = "disabled"; + spi_0: spi@D0000 { + + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; + + partition@00000 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + + partition@e0000 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; + }; + + partition@3e0000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; + + partition@ae0000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; + }; + + }; + }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index f6b1c8973845..8b6f8f0c9171 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -9,13 +9,17 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5440"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + }; + clock: clock-controller@0x160000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x1000>; @@ -79,8 +83,13 @@ interrupts = <0 57 0>; operating-points = < /* KHz uV */ + 1500000 1100000 + 1400000 1075000 + 1300000 1050000 1200000 1025000 + 1100000 1000000 1000000 975000 + 900000 950000 800000 925000 >; }; @@ -101,14 +110,14 @@ clock-names = "uart", "clk_uart_baud0"; }; - spi { - compatible = "samsung,exynos4210-spi"; - reg = <0xD0000 0x1000>; + spi_0: spi@D0000 { + compatible = "samsung,exynos5440-spi"; + reg = <0xD0000 0x100>; interrupts = <0 4 0>; - tx-dma-channel = <&pdma0 5>; /* preliminary */ - rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; clocks = <&clock 21>, <&clock 16>; clock-names = "spi", "spi_busclk0"; }; @@ -184,28 +193,6 @@ compatible = "arm,amba-bus"; interrupt-parent = <&gic>; ranges; - - pdma0: pdma@00121000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121000 0x1000>; - interrupts = <0 46 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@00120000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <0 47 0>; - clocks = <&clock 8>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; }; rtc { @@ -214,6 +201,29 @@ interrupts = <0 17 0>, <0 16 0>; clocks = <&clock 21>; clock-names = "rtc"; - status = "disabled"; + }; + + sata@210000 { + compatible = "snps,exynos5440-ahci"; + reg = <0x210000 0x10000>; + interrupts = <0 30 0>; + clocks = <&clock 23>; + clock-names = "sata"; + }; + + ohci@220000 { + compatible = "samsung,exynos5440-ohci"; + reg = <0x220000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; + }; + + ehci@221000 { + compatible = "samsung,exynos5440-ehci"; + reg = <0x221000 0x1000>; + interrupts = <0 29 0>; + clocks = <&clock 24>; + clock-names = "usbhost"; }; }; diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi new file mode 100644 index 000000000000..527e3193817f --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi @@ -0,0 +1,173 @@ +/* + * Samsung S3C2416 pinctrl settings + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl_0 { + /* + * Pin banks + */ + + gpa: gpa { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe: gpe { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf: gpf { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg: gpg { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph: gph { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj: gpj { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk: gpk { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl: gpl { + gpio-controller; + #gpio-cells = <2>; + }; + + gpm: gpm { + gpio-controller; + #gpio-cells = <2>; + }; + + /* + * Pin groups + */ + + uart0_data: uart0-data { + samsung,pins = "gph-0", "gph-1"; + samsung,pin-function = <2>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gph-8", "gph-9"; + samsung,pin-function = <2>; + }; + + uart1_data: uart1-data { + samsung,pins = "gph-2", "gph-3"; + samsung,pin-function = <2>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gph-10", "gph-11"; + samsung,pin-function = <2>; + }; + + uart2_data: uart2-data { + samsung,pins = "gph-4", "gph-5"; + samsung,pin-function = <2>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + uart3_data: uart3-data { + samsung,pins = "gph-6", "gph-7"; + samsung,pin-function = <2>; + }; + + extuart_clk: extuart-clk { + samsung,pins = "gph-12"; + samsung,pin-function = <2>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpe-14", "gpe-15"; + samsung,pin-function = <2>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpe-11", "gpe-12", "gpe-13"; + samsung,pin-function = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpe-5"; + samsung,pin-function = <2>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpe-6"; + samsung,pin-function = <2>; + }; + + sd0_bus1: sd0-bus1 { + samsung,pins = "gpe-7"; + samsung,pin-function = <2>; + }; + + sd0_bus4: sd0-bus4 { + samsung,pins = "gpe-8", "gpe-9", "gpe-10"; + samsung,pin-function = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpl-8"; + samsung,pin-function = <2>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpl-9"; + samsung,pin-function = <2>; + }; + + sd1_bus1: sd1-bus1 { + samsung,pins = "gpl-0"; + samsung,pin-function = <2>; + }; + + sd1_bus4: sd1-bus4 { + samsung,pins = "gpl-1", "gpl-2", "gpl-3"; + samsung,pin-function = <2>; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts new file mode 100644 index 000000000000..59594cf15998 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -0,0 +1,72 @@ +/* + * SAMSUNG SMDK2416 board device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "s3c2416.dtsi" + +/ { + model = "SMDK2416"; + compatible = "samsung,s3c2416"; + + memory { + reg = <0x30000000 0x4000000>; + }; + + serial@50000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; + }; + + serial@50004000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; + }; + + serial@50008000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; + }; + + serial@5000C000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; + }; + + watchdog@53000000 { + status = "okay"; + }; + + rtc@57000000 { + status = "okay"; + }; + + sdhci@4AC00000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; + }; + + sdhci@4A800000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi new file mode 100644 index 000000000000..e6555bdd81b8 --- /dev/null +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -0,0 +1,79 @@ +/* + * Samsung's S3C2416 SoC device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "s3c24xx.dtsi" +#include "s3c2416-pinctrl.dtsi" + +/ { + model = "Samsung S3C2416 SoC"; + compatible = "samsung,s3c2416"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ejs"; + }; + }; + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2416-irq"; + }; + + pinctrl@56000000 { + compatible = "samsung,s3c2416-pinctrl"; + }; + + serial@50000000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@50008000 { + compatible = "samsung,s3c2440-uart"; + }; + + serial@5000C000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x5000C000 0x4000>; + interrupts = <1 18 24 4>, <1 18 25 4>; + status = "disabled"; + }; + + sdhci@4AC00000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4AC00000 0x100>; + interrupts = <0 0 21 3>; + status = "disabled"; + }; + + sdhci@4A800000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0x4A800000 0x100>; + interrupts = <0 0 20 3>; + status = "disabled"; + }; + + watchdog@53000000 { + interrupts = <1 9 27 3>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2416-rtc"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2440-i2c"; + }; +}; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi new file mode 100644 index 000000000000..2d1d7dc9418a --- /dev/null +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -0,0 +1,92 @@ +/* + * Samsung's S3C24XX family device tree source + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + compatible = "samsung,s3c24xx"; + interrupt-parent = <&intc>; + + aliases { + pinctrl0 = &pinctrl_0; + }; + + intc:interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + pinctrl_0: pinctrl@56000000 { + reg = <0x56000000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,s3c2410-wakeup-eint"; + interrupts = <0 0 0 3>, + <0 0 1 3>, + <0 0 2 3>, + <0 0 3 3>, + <0 0 4 4>, + <0 0 5 4>; + }; + }; + + timer@51000000 { + compatible = "samsung,s3c2410-pwm"; + reg = <0x51000000 0x1000>; + interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>; + #pwm-cells = <4>; + }; + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupts = <1 28 0 4>, <1 28 1 4>; + status = "disabled"; + }; + + serial@50004000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + status = "disabled"; + }; + + serial@50008000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50008000 0x4000>; + interrupts = <1 15 6 4>, <1 15 7 4>; + status = "disabled"; + }; + + watchdog@53000000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x53000000 0x100>; + interrupts = <0 0 9 3>; + status = "disabled"; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupts = <0 0 30 3>, <0 0 8 3>; + status = "disabled"; + }; + + i2c@54000000 { + compatible = "samsung,s3c2410-i2c"; + reg = <0x54000000 0x100>; + interrupts = <0 0 27 3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; |