diff options
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r-- | arch/arm/boot/dts/am33xx.dtsi | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-385-turris-omnia.dts | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91-sam9x60ek.dts | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2711.dtsi | 12 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 22 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap4.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap44xx-clocks.dtsi | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/omap5.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/sam9x60.dtsi | 9 |
12 files changed, 46 insertions, 37 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5b213a1e68bb..5e33d0e88f5b 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -40,6 +40,9 @@ ethernet1 = &cpsw_emac1; spi0 = &spi0; spi1 = &spi1; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; }; cpus { diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 646a06420c77..5bd6a66d2c2b 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -32,7 +32,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { @@ -389,6 +390,7 @@ phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; + marvell,reg-init = <3 18 0 0x4985>; /* irq is connected to &pcawan pin 7 */ }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 73b6b1f89de9..775ceb3acb6c 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -334,14 +334,6 @@ }; &pinctrl { - atmel,mux-mask = < - /* A B C */ - 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */ - 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */ - 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */ - 0x003FFFFF 0x003F8000 0x00000000 /* pioD */ - >; - adc { pinctrl_adc_default: adc_default { atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 1b1163858b1d..e3251f3e3eaa 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -84,8 +84,8 @@ pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; - ethernet-phy@0 { - reg = <0x0>; + ethernet-phy@7 { + reg = <0x7>; interrupt-parent = <&pioA>; interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 462b1dfb0385..720beec54d61 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,14 +308,6 @@ #reset-cells = <1>; }; - bsc_intr: interrupt-controller@7ef00040 { - compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; - reg = <0x7ef00040 0x30>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - }; - aon_intr: interrupt-controller@7ef00100 { compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; reg = <0x7ef00100 0x30>; @@ -362,8 +354,6 @@ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <0>; status = "disabled"; }; @@ -405,8 +395,6 @@ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 7a1e53195785..f28a96fcf23e 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -433,6 +433,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd1_reg>; status = "disabled"; }; @@ -442,5 +443,6 @@ &pinctrl_usdhc3_cdwp>; cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd0_reg>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c593597b2119..5a1e10def6ef 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -210,9 +210,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; @@ -222,9 +219,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; }; }; @@ -243,6 +237,22 @@ status = "okay"; }; +&gpio_spi { + eth0-phy-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth0-phy"; + }; + + eth1-phy-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth1-phy"; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts index ecbb2cc5b9ab..79cc45728cd2 100644 --- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -14,5 +14,6 @@ }; &gpmi { + fsl,use-minimum-ecc; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 72e4f6481776..4a9f9496a867 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -22,6 +22,11 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 532868591107..1f1c04d8f472 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -770,14 +770,6 @@ ti,max-div = <2>; }; - sha2md5_fck: sha2md5_fck@15c8 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15c8>; - }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e025b7c9a357..ee821d0ab364 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -25,6 +25,11 @@ i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 84066c1298df..ec45ced3cde6 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -606,6 +606,15 @@ compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff400 0xfffff400 0x800>; + /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xef00019d /* pioA */ + 0x03ffffff 0x02fc7e7f 0x00780000 /* pioB */ + 0xffffffff 0xffffffff 0xf83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + pioA: gpio@fffff400 { compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; |