diff options
Diffstat (limited to 'arch/arm/boot/dts')
69 files changed, 240 insertions, 120 deletions
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 0d35ab64641c..7106114c7464 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -74,6 +74,7 @@ audio_codec: tlv320aic3106@1b { compatible = "ti,tlv320aic3106"; reg = <0x1b>; + ai3x-micbias-vg = <0x2>; }; accel: lis331dlh@1d { @@ -153,7 +154,7 @@ ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", - "LINE1L", "Line In"; + "MIC3L", "Mic3L Switch"; }; &mcasp0 { @@ -438,41 +439,50 @@ regulators { dcdc1_reg: regulator@0 { /* VDD_1V8 system supply */ + regulator-always-on; }; dcdc2_reg: regulator@1 { /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; + regulator-max-microvolt = <1150000>; regulator-boot-on; + regulator-always-on; }; dcdc3_reg: regulator@2 { /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1325000>; regulator-boot-on; + regulator-always-on; }; ldo1_reg: regulator@3 { /* VRTC 1.8V always-on supply */ + regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { /* 3.3V rail */ + regulator-name = "vdd_3v3aux"; + regulator-always-on; }; ldo3_reg: regulator@5 { /* VDD_3V3A 3.3V rail */ + regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo4_reg: regulator@6 { /* VDD_3V3B 3.3V rail */ + regulator-name = "vdd_3v3b"; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 9c7fb0acae79..4e42f30cb318 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -22,6 +22,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) @@ -34,6 +35,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB) @@ -45,6 +47,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2) @@ -53,6 +56,7 @@ MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index aa465904f6cc..096f68be99e2 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -686,7 +686,8 @@ &dcan1 { status = "ok"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dcan1_pins_default>; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4e1b60581782..803738414086 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -587,9 +587,10 @@ &dcan1 { status = "ok"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dcan1_pins_default>; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; }; &qspi { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index c892d58e8dad..b995333ea22b 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -468,6 +468,7 @@ interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; clocks = <&clks 26>; + #io-channel-cells = <1>; }; spdif@80054000 { diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index dd45e6971bc3..9351296356dc 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx25.dtsi" @@ -114,8 +115,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 1 0>; - wp-gpios = <&gpio2 0 0>; + cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index bc215e4b75fd..b69be5c499cf 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -108,7 +108,7 @@ }; gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, @@ -117,7 +117,7 @@ }; gpt2: timer@10004000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, @@ -126,7 +126,7 @@ }; gpt3: timer@10005000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, @@ -376,7 +376,7 @@ }; gpt4: timer@10019000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, @@ -385,7 +385,7 @@ }; gpt5: timer@1001a000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, @@ -436,7 +436,7 @@ }; gpt6: timer@1001f000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 93d3ea12328c..0f3fe29b816e 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -98,7 +98,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e9337ad52f59..3bc18835fb4b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -103,8 +103,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d0e0f57eb432..53f40885c530 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -124,8 +124,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 181ae5ebf23f..b0d5542ac829 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -147,8 +147,8 @@ &esdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc3>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; + cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; bus-width = <8>; status = "okay"; }; @@ -295,9 +295,10 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync>; + ddc-i2c-bus = <&i2c2>; fsl,tve-mode = "vga"; - fsl,hsync-pin = <4>; - fsl,vsync-pin = <6>; + fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */ + fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 1d325576bcc0..fc89ce1e5763 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -41,8 +41,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 4f1f0e2868bf..e03373a58760 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -41,8 +41,8 @@ pinctrl-0 = <&pinctrl_esdhc2>, <&pinctrl_esdhc2_cdwp>; vmmc-supply = <®_3p3v>; - wp-gpios = <&gpio1 2 0>; - cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 704bd72cbfec..d3e50b22064f 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -183,7 +183,7 @@ }; &esdhc1 { - cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -191,7 +191,7 @@ }; &esdhc2 { - cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index c17d3ad6dba5..fc51b87ad208 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -119,8 +119,8 @@ &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio3 25 0>; - wp-gpios = <&gpio2 19 0>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 43cb3fd76be7..5111f5170d53 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -305,8 +305,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -314,8 +314,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 78df05e9d1ce..d6515f7a56c4 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -196,8 +197,8 @@ }; &usdhc3 { - cd-gpios = <&gpio6 11 0>; - wp-gpios = <&gpio6 14 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 703539cf36d3..00bd63e63d0c 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -161,7 +162,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio6 11 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index a43abfa21e33..5645d52850a7 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -251,7 +251,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; - cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -260,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e6d9195a1da7..f4d6ae564ead 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -173,7 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -181,7 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 1d85de2befb3..a47a0399a172 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -392,7 +392,7 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; no-1-8-v; status = "okay"; }; @@ -400,7 +400,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; no-1-8-v; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 59e5d15e3ec4..ff41f83551de 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -258,6 +258,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 2c253d6d20bd..45e7c39e80d5 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -181,7 +183,7 @@ &usdhc2 { /* module slot */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio2 2 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b5756c21ea1d..4493f6e99330 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -318,7 +318,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 86f03c1b147c..a857d1294609 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -324,7 +324,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4a8d97f47759..1afe3385e2d2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -417,7 +417,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62a82f3eba88..6dd0b764e036 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -299,6 +299,6 @@ &pinctrl_hummingboard_usdhc2 >; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 3af16dfe417b..d7fe6672d00c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -453,7 +453,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -461,7 +461,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1ce6133b67f5..9e6ecd99b472 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -409,8 +409,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -418,7 +418,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 488a640796ac..3373fd958e95 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -342,7 +342,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -351,6 +351,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 3b24b12651b2..e329ca5c3322 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -467,8 +467,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; + cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index e00c44f6a0df..782379320517 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -448,8 +448,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -457,7 +457,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a626e6dd8022..944eb81cb2b8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -562,8 +562,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -571,8 +571,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f02b80b41d4f..da08de324e9e 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -680,7 +680,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 2 0>; + cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; @@ -690,7 +690,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 3 0>; + cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 5fb091675582..9e096d811bed 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -9,6 +9,8 @@ * */ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -250,13 +252,13 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio3 9 0>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 945887d3fdb3..b84dff2e94ea 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -617,8 +617,8 @@ pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <8>; - cd-gpios = <&gpio4 7 0>; - wp-gpios = <&gpio4 6 0>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -627,8 +627,8 @@ pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio4 29 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -637,6 +637,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio3 22 0>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index e3c0b63c2205..115f3fd78971 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -49,7 +49,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -61,7 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; - cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; enable-sdio-wakup; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index cef04cef3a80..ac88c3467078 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -293,7 +293,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -304,7 +304,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 4d1a4b977d84..fdd1d7c9a5cc 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -234,8 +234,8 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio5 1 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; enable-sdio-wakeup; keep-power-in-suspend; status = "okay"; diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 50e555eab50d..1b6494fbdb91 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -86,7 +86,7 @@ gpio,syscon-dev = <&devctrl 0x240>; }; - pcie@21020000 { + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; clock-names = "pcie"; @@ -96,6 +96,7 @@ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c06542b2c954..e7a6f6deabb6 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -286,7 +286,7 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; - pcie@21800000 { + pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; clock-names = "pcie"; @@ -296,6 +296,7 @@ ranges = <0x81000000 0 0 0x23250000 0 0x4000 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 233c69e50ae3..df8908adb0cb 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -120,7 +120,7 @@ lcd0: display@0 { compatible = "lgphilips,lb035q02"; - label = "lcd"; + label = "lcd35"; reg = <1>; /* CS1 */ spi-max-frequency = <10000000>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index f5395b7da912..048fd216970a 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -98,7 +98,7 @@ lcd0: display@0 { compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; + label = "lcd43"; pinctrl-names = "default"; pinctrl-0 = <<e430_pins>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index f884d6adb71e..7d31c6ff246f 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -551,6 +551,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -558,6 +559,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7d24ae0306b5..c8fd648a7108 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -612,6 +612,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -619,6 +620,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 71468a7eb28f..5e17fd147728 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -60,27 +60,27 @@ rxc-skew-ps = <2000>; }; -&mmc0 { - vmmc-supply = <®ulator_3_3v>; - vqmmc-supply = <®ulator_3_3v>; -}; - -&usb1 { - status = "okay"; -}; - &gpio2 { status = "okay"; }; -&i2c1{ +&i2c1 { status = "okay"; - accel1: accel1@53{ - compatible = "adxl34x"; + accel1: accelerometer@53 { + compatible = "adi,adxl345"; reg = <0x53>; - interrupt-parent = < &portc >; + interrupt-parent = <&portc>; interrupts = <3 2>; }; }; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index d42c84b1df8d..e48857249ce7 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9d342920695a..54bc6d3cf290 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index b23e05ed1d60..c611f5606dfe 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 13e1aa33daa2..df2232d767ed 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 40accc87e3a2..14594ce8c18a 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index 5de1431653e4..e859e8288bcd 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index f79b3dfaabe6..f4e92e599729 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index b09632963d15..070f2c1b7851 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 95372080eea6..da210b454753 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index fdedbb514102..1b1034477923 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index ffea342aeec9..22be6e5edaac 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index f0e3fcf8e323..118135d75899 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 32dd55e5f4e6..6eaaf638e52e 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson U8540 platform with Device Tree"; compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory@0 { device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 651c56d400a4..c8b815819cfe 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -16,6 +16,13 @@ model = "ST-Ericsson CCU9540 platform with Device Tree"; compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 853684ad7773..a75f3289e653 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -971,7 +971,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - uart@80120000 { + ux500_serial0: uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; @@ -986,7 +986,7 @@ status = "disabled"; }; - uart@80121000 { + ux500_serial1: uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1001,7 +1001,7 @@ status = "disabled"; }; - uart@80007000 { + ux500_serial2: uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 744c1e3a744d..6d8ce154347e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -32,11 +32,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 2b1cb5b584b6..18e9795a94f9 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 59523f866812..24739914e689 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -16,4 +16,11 @@ / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 7f3975b58d16..b0278f4c486c 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -23,6 +23,11 @@ }; soc { + /* Enable UART1 on this board */ + uart@80121000 { + status = "okay"; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 8c6a2de56cf1..c2e1ba019a2f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -19,6 +19,13 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index d53cccdce776..ebd8547e98f1 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -18,4 +18,11 @@ / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index a4bc9e77d640..810cda743b6d 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -43,15 +43,26 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>; + <&touch_hrefv60_mode>, + <&gpios_hrefv60_mode>; sdi0 { - /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { + /* SD card detect GPIO pin, extend default state */ default_hrefv60_cfg1 { pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; ipgpio { @@ -213,6 +224,16 @@ }; }; }; + gpios { + /* Dangling GPIO pins */ + gpios_hrefv60_mode: gpios_hrefv60 { + default_cfg1 { + /* Normally UART1 RXD, now dangling */ + pins = "GPIO4_AH6"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 9edadc37719f..32a5ccb14e7e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -18,6 +18,13 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -223,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -452,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { |