diff options
Diffstat (limited to 'arch/arm/boot')
65 files changed, 2577 insertions, 936 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 7ac1610252ba..e7190bb5998e 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y) OBJS += ll_char_wr.o font.o endif -ifeq ($(CONFIG_ARCH_SHARK),y) -OBJS += head-shark.o ofw-shark.o -endif - ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S deleted file mode 100644 index 92b56897ed64..000000000000 --- a/arch/arm/boot/compressed/head-shark.S +++ /dev/null @@ -1,140 +0,0 @@ -/* The head-file for the Shark - * by Alexander Schulz - * - * Does the following: - * - get the memory layout from firmware. This can only be done as long as the mmu - * is still on. - * - switch the mmu off, so we have physical addresses - * - copy the kernel to 0x08508000. This is done to have a fixed address where the - * C-parts (misc.c) are executed. This address must be known at compile-time, - * but the load-address of the kernel depends on how much memory is installed. - * - Jump to this location. - * - Set r8 with 0, r7 with the architecture ID for head.S - */ - -#include <linux/linkage.h> - -#include <asm/assembler.h> - - .section ".start", "ax" - - .arch armv4 - b __beginning - -__ofw_data: .long 0 @ the number of memory blocks - .space 128 @ (startaddr,size) ... - .space 128 @ bootargs - .align - -__beginning: mov r4, r0 @ save the entry to the firmware - - mov r0, #0xC0 @ disable irq and fiq - mov r1, r0 - mrs r3, cpsr - bic r2, r3, r0 - eor r2, r2, r1 - msr cpsr_c, r2 - - mov r0, r4 @ get the Memory layout from firmware - adr r1, __ofw_data - add r2, r1, #4 - mov lr, pc - b ofw_init - mov r1, #0 - - adr r2, __mmu_off @ calculate physical address - sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys - adr r0, __ofw_data - ldr r0, [r0, #4] - add r2, r2, r0 - add r2, r2, #0x00500000 - - mrc p15, 0, r3, c1, c0 - bic r3, r3, #0xC @ Write Buffer and DCache - bic r3, r3, #0x1000 @ ICache - mcr p15, 0, r3, c1, c0 @ disabled - - mov r0, #0 - mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4 - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 - mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4 - - bic r3, r3, #0x1 @ MMU - mcr p15, 0, r3, c1, c0 @ disabled - - mov pc, r2 - -__copy_target: .long 0x08507FFC -__copy_end: .long 0x08607FFC - - .word _start - .word __bss_start - - .align -__temp_stack: .space 128 - -__mmu_off: - adr r0, __ofw_data @ read the 1. entry of the memory map - ldr r0, [r0, #4] - orr r0, r0, #0x00600000 - sub r0, r0, #4 - - ldr r1, __copy_end - ldr r3, __copy_target - -/* r0 = 0x0e600000 (current end of kernelcode) - * r3 = 0x08508000 (where it should begin) - * r1 = 0x08608000 (end of copying area, 1MB) - * The kernel is compressed, so 1 MB should be enough. - * copy the kernel to the beginning of physical memory - * We start from the highest address, so we can copy - * from 0x08500000 to 0x08508000 if we have only 8MB - */ - -/* As we get more 2.6-kernels it gets more and more - * uncomfortable to be bound to kernel images of 1MB only. - * So we add a loop here, to be able to copy some more. - * Alexander Schulz 2005-07-17 - */ - - mov r4, #3 @ How many megabytes to copy - - -__MoveCode: sub r4, r4, #1 - -__Copy: ldr r2, [r0], #-4 - str r2, [r1], #-4 - teq r1, r3 - bne __Copy - - /* The firmware maps us in blocks of 1 MB, the next block is - _below_ the last one. So our decrementing source pointer - ist right here, but the destination pointer must be increased - by 2 MB */ - add r1, r1, #0x00200000 - add r3, r3, #0x00100000 - - teq r4, #0 - bne __MoveCode - - - /* and jump to it */ - adr r2, __go_on @ where we want to jump - adr r0, __ofw_data @ read the 1. entry of the memory map - ldr r0, [r0, #4] - sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00) - sub r2, r2, #0x00500000 @ -0050 - ldr r0, __copy_target @ and add 0850 8000 instead - add r0, r0, #4 - add r2, r2, r0 - mov pc, r2 @ and jump there - -__go_on: - adr sp, __temp_stack - add sp, sp, #128 - adr r0, __ofw_data - mov lr, pc - b create_params - - mov r8, #0 - mov r7, #15 diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c deleted file mode 100644 index 465c54b6b128..000000000000 --- a/arch/arm/boot/compressed/ofw-shark.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/ofw-shark.c - * - * by Alexander Schulz - * - * This file is used to get some basic information - * about the memory layout of the shark we are running - * on. Memory is usually divided in blocks a 8 MB. - * And bootargs are copied from OpenFirmware. - */ - - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/setup.h> -#include <asm/page.h> - - -asmlinkage void -create_params (unsigned long *buffer) -{ - /* Is there a better address? Also change in mach-shark/core.c */ - struct tag *tag = (struct tag *) 0x08003000; - int j,i,m,k,nr_banks,size; - unsigned char *c; - - k = 0; - - /* Head of the taglist */ - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = 1; - tag->u.core.pagesize = PAGE_SIZE; - tag->u.core.rootdev = 0; - - /* Build up one tagged block for each memory region */ - size=0; - nr_banks=(unsigned int) buffer[0]; - for (j=0;j<nr_banks;j++){ - /* search the lowest address and put it into the next entry */ - /* not a fast sort algorithm, but there are at most 8 entries */ - /* and this is used only once anyway */ - m=0xffffffff; - for (i=0;i<(unsigned int) buffer[0];i++){ - if (buffer[2*i+1]<m) { - m=buffer[2*i+1]; - k=i; - } - } - - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = buffer[2*k+2]; - tag->u.mem.start = buffer[2*k+1]; - - size += buffer[2*k+2]; - - buffer[2*k+1]=0xffffffff; /* mark as copied */ - } - - /* The command line */ - tag = tag_next(tag); - tag->hdr.tag = ATAG_CMDLINE; - - c=(unsigned char *)(&buffer[34]); - j=0; - while (*c) tag->u.cmdline.cmdline[j++]=*c++; - - tag->u.cmdline.cmdline[j]=0; - tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2; - - /* Hardware revision */ - tag = tag_next(tag); - tag->hdr.tag = ATAG_REVISION; - tag->hdr.size = tag_size(tag_revision); - tag->u.revision.rev = ((unsigned char) buffer[33])-'0'; - - /* End of the taglist */ - tag = tag_next(tag); - tag->hdr.tag = 0; - tag->hdr.size = 0; -} - - -typedef int (*ofw_handle_t)(void *); - -/* Everything below is called with a wrong MMU setting. - * This means: no string constants, no initialization of - * arrays, no global variables! This is ugly but I didn't - * want to write this in assembler :-) - */ - -int -of_decode_int(const unsigned char *p) -{ - unsigned int i = *p++ << 8; - i = (i + *p++) << 8; - i = (i + *p++) << 8; - return (i + *p); -} - -int -OF_finddevice(ofw_handle_t openfirmware, char *name) -{ - unsigned int args[8]; - char service[12]; - - service[0]='f'; - service[1]='i'; - service[2]='n'; - service[3]='d'; - service[4]='d'; - service[5]='e'; - service[6]='v'; - service[7]='i'; - service[8]='c'; - service[9]='e'; - service[10]='\0'; - - args[0]=(unsigned int)service; - args[1]=1; - args[2]=1; - args[3]=(unsigned int)name; - - if (openfirmware(args) == -1) - return -1; - return args[4]; -} - -int -OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop) -{ - unsigned int args[8]; - char service[12]; - - service[0]='g'; - service[1]='e'; - service[2]='t'; - service[3]='p'; - service[4]='r'; - service[5]='o'; - service[6]='p'; - service[7]='l'; - service[8]='e'; - service[9]='n'; - service[10]='\0'; - - args[0] = (unsigned int)service; - args[1] = 2; - args[2] = 1; - args[3] = (unsigned int)handle; - args[4] = (unsigned int)prop; - - if (openfirmware(args) == -1) - return -1; - return args[5]; -} - -int -OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen) -{ - unsigned int args[8]; - char service[8]; - - service[0]='g'; - service[1]='e'; - service[2]='t'; - service[3]='p'; - service[4]='r'; - service[5]='o'; - service[6]='p'; - service[7]='\0'; - - args[0] = (unsigned int)service; - args[1] = 4; - args[2] = 1; - args[3] = (unsigned int)handle; - args[4] = (unsigned int)prop; - args[5] = (unsigned int)buf; - args[6] = buflen; - - if (openfirmware(args) == -1) - return -1; - return args[7]; -} - -asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer) -{ - int phandle,i,mem_len,buffer[32]; - char temp[15]; - - temp[0]='/'; - temp[1]='m'; - temp[2]='e'; - temp[3]='m'; - temp[4]='o'; - temp[5]='r'; - temp[6]='y'; - temp[7]='\0'; - - phandle=OF_finddevice(o,temp); - - temp[0]='r'; - temp[1]='e'; - temp[2]='g'; - temp[3]='\0'; - - mem_len = OF_getproplen(o,phandle, temp); - OF_getprop(o,phandle, temp, buffer, mem_len); - *nomr=mem_len >> 3; - - for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]); - - temp[0]='/'; - temp[1]='c'; - temp[2]='h'; - temp[3]='o'; - temp[4]='s'; - temp[5]='e'; - temp[6]='n'; - temp[7]='\0'; - - phandle=OF_finddevice(o,temp); - - temp[0]='b'; - temp[1]='o'; - temp[2]='o'; - temp[3]='t'; - temp[4]='a'; - temp[5]='r'; - temp[6]='g'; - temp[7]='s'; - temp[8]='\0'; - - mem_len = OF_getproplen(o,phandle, temp); - OF_getprop(o,phandle, temp, buffer, mem_len); - if (mem_len > 128) mem_len=128; - for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i]; - pointer[i+33]=0; - - temp[0]='/'; - temp[1]='\0'; - phandle=OF_finddevice(o,temp); - temp[0]='b'; - temp[1]='a'; - temp[2]='n'; - temp[3]='n'; - temp[4]='e'; - temp[5]='r'; - temp[6]='-'; - temp[7]='n'; - temp[8]='a'; - temp[9]='m'; - temp[10]='e'; - temp[11]='\0'; - mem_len = OF_getproplen(o,phandle, temp); - OF_getprop(o,phandle, temp, buffer, mem_len); - * ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2]; -} diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6ce9d1d76420..d57c1a65b24f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -104,8 +104,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb -dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ - msm8960-cdp.dtb +dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ @@ -217,13 +217,14 @@ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ - emev2-kzm9d-reference.dtb \ + r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ r8a7779-marzen-reference.dtb \ + r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ r8a7790-lager-reference.dtb \ sh73a0-kzm9g.dtb \ @@ -231,7 +232,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a73a4-ape6evm.dtb \ r8a73a4-ape6evm-reference.dtb \ sh7372-mackerel.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb +dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index b4ec6fe53fc7..17b879990914 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -7,6 +7,8 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_usart3.dtsi" +#include "at91sam9x5_macb0.dtsi" / { model = "Atmel AT91SAM9G25 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index bebf9f55614b..e35c2fcf8298 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_macb0.dtsi" / { model = "Atmel AT91SAM9G35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi index 49e94aba938f..c2554219f7a4 100644 --- a/arch/arm/boot/dts/at91sam9x25.dtsi +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -7,6 +7,9 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_usart3.dtsi" +#include "at91sam9x5_macb0.dtsi" +#include "at91sam9x5_macb1.dtsi" / { model = "Atmel AT91SAM9X25 SoC"; @@ -22,27 +25,6 @@ 0x80000000 0xfffd0000 0xb83fffff /* pioC */ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; - - macb1 { - pinctrl_macb1_rmii: macb1_rmii-0 { - atmel,pins = - <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ - AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ - AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ - AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ - AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ - AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ - AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ - AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ - AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ - AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ - }; - }; - }; - - macb1: ethernet@f8030000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb1_rmii>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index 1a3d525a1f5d..8eac66ce0ab7 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_macb0.dtsi" / { model = "Atmel AT91SAM9X35 SoC"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e74dc15efa9d..40267a116c3c 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -206,29 +206,6 @@ }; }; - usart3 { - pinctrl_usart3: usart3-0 { - atmel,pins = - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ - }; - - pinctrl_usart3_rts: usart3_rts-0 { - atmel,pins = - <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ - }; - - pinctrl_usart3_cts: usart3_cts-0 { - atmel,pins = - <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ - }; - - pinctrl_usart3_sck: usart3_sck-0 { - atmel,pins = - <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ - }; - }; - uart0 { pinctrl_uart0: uart0-0 { atmel,pins = @@ -277,34 +254,6 @@ }; }; - macb0 { - pinctrl_macb0_rmii: macb0_rmii-0 { - atmel,pins = - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ - }; - - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { - atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ - }; - }; - mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = @@ -610,22 +559,6 @@ status = "disabled"; }; - macb0: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf802c000 0x100>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_rmii>; - status = "disabled"; - }; - - macb1: ethernet@f8030000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf8030000 0x100>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; - status = "disabled"; - }; - i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi new file mode 100644 index 000000000000..55731ffba764 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -0,0 +1,56 @@ +/* + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */ + }; + }; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi new file mode 100644 index 000000000000..77425a627a94 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -0,0 +1,44 @@ +/* + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2 + * Ethernet interfaces. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */ + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */ + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */ + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */ + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */ + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */ + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */ + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */ + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */ + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf8030000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi new file mode 100644 index 000000000000..2347e9563cef --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -0,0 +1,51 @@ +/* + * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 4 USART. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff400 { + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */ + }; + + pinctrl_usart3_sck: usart3_sck-0 { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */ + }; + }; + }; + + usart3: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index e8559b753c9d..bc22557d7a6a 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -19,6 +19,14 @@ bootargs = "console=ttyAMA0"; }; + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000002>; + cpu_off = <0x84000004>; + cpu_on = <0x84000006>; + }; + soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts deleted file mode 100644 index cceefda268b6..000000000000 --- a/arch/arm/boot/dts/emev2-kzm9d-reference.dts +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Device Tree Source for the KZM9D board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -/dts-v1/; - -/include/ "emev2.dtsi" - -/ { - model = "EMEV2 KZM9D Board"; - compatible = "renesas,kzm9d-reference", "renesas,emev2"; - - memory { - device_type = "memory"; - reg = <0x40000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; - }; - - reg_1p8v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - lan9220@20000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x20000000 0x10000>; - phy-mode = "mii"; - interrupt-parent = <&gpio0>; - interrupts = <1 1>; /* active high */ - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; -}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index f92e812fdd9f..861aa7d6fc7d 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for the KZM9D board * - * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2013 Renesas Solutions Corp. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -23,4 +23,35 @@ chosen { bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 1>; /* active high */ + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index d3340db03000..1a12fb23767c 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -199,7 +199,12 @@ }; buck1_reg: BUCK1 { - regulator-name = "VDD_ARM_1.2V"; + /* + * HACK: The real name is VDD_ARM_1.2V, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 1c164f234bcc..63cc571ca307 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -290,7 +290,12 @@ }; varm_breg: BUCK1 { - regulator-name = "VARM_1.2V_C210"; + /* + * HACK: The real name is VARM_1.2V_C210, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1350000>; regulator-always-on; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 889cdada1ce9..d2e3f5f5916d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -350,3 +350,7 @@ status = "okay"; }; }; + +&mdma1 { + reg = <0x12840000 0x1000>; +}; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 724a22f9b1c8..9a49e6804ae1 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -210,21 +210,21 @@ samsung,pins = "gpa0-2", "gpa0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c2_hs_bus: i2c2-hs-bus { samsung,pins = "gpa0-6", "gpa0-7"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; uart2_data: uart2-data { @@ -238,21 +238,21 @@ samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c3_bus: i2c3-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c3_hs_bus: i2c3-hs-bus { samsung,pins = "gpa1-2", "gpa1-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; uart3_data: uart3-data { @@ -273,14 +273,14 @@ samsung,pins = "gpa2-0", "gpa2-1"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c5_bus: i2c5-bus { samsung,pins = "gpa2-2", "gpa2-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; spi1_bus: spi1-bus { @@ -376,14 +376,14 @@ samsung,pins = "gpb3-0", "gpb3-1"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; i2c1_hs_bus: i2c1-hs-bus { samsung,pins = "gpb3-2", "gpb3-3"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; sd0_clk: sd0-clk { @@ -551,14 +551,14 @@ samsung,pins = "gpd0-2", "gpd0-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; }; @@ -649,42 +649,42 @@ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_i2c2_bus: cam-i2c2-bus { samsung,pins = "gpe0-6", "gpe1-0"; samsung,pin-function = <4>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_spi1_bus: cam-spi1-bus { samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; samsung,pin-function = <4>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_i2c1_bus: cam-i2c1-bus { samsung,pins = "gpf0-2", "gpf0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_i2c0_bus: cam-i2c0-bus { samsung,pins = "gpf0-0", "gpf0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_spi0_bus: cam-spi0-bus { samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_bayrgb_bus: cam-bayrgb-bus { @@ -695,7 +695,7 @@ "gpg2-0", "gpg2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; cam_port_a: cam-port-a { @@ -704,7 +704,7 @@ "gph1-4", "gph1-5", "gph1-6", "gph1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; }; @@ -756,7 +756,7 @@ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; c2c_txd: c2c-txd { @@ -766,7 +766,7 @@ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samaung,pin-drv = <0>; + samsung,pin-drv = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index 5b22508050da..777fb1c2c70f 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -17,7 +17,7 @@ compatible = "samsung,sd5v1", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 4808a5af099b..d58cb787061a 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -17,7 +17,7 @@ compatible = "samsung,ssdk5440", "samsung,exynos5440"; chosen { - bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; spi_0: spi@D0000 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 87faa6e8b6e7..c96ceaef7ddf 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -431,6 +431,7 @@ reg = <0x80050000 0x2000>; interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; + clocks = <&clks 26>; }; spdif@80054000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1f63845b8ce0..4267c2b05d60 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -184,6 +184,10 @@ lradc@80050000 { fsl,lradc-touchscreen-wires = <4>; status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; }; i2c0: i2c@80058000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 1c5ed9dbebb5..cda19c8b0a47 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -944,6 +944,7 @@ interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; status = "disabled"; + clocks = <&clks 41>; }; spdif: spdif@80054000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 6eabfa12e8c5..28558f1aaf2d 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -384,7 +384,9 @@ }; anatop: anatop@020c8000 { - compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx6sl-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 813b91d7bea2..0f06f8687b0b 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -5,6 +5,11 @@ /include/ "skeleton.dtsi" / { + core-module@10000000 { + compatible = "arm,core-module-integrator"; + reg = <0x10000000 0x200>; + }; + timer@13000000 { reg = <0x13000000 0x100>; interrupt-parent = <&pic>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index b6b82eca8d1e..e6be9315ff0a 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -19,8 +19,11 @@ }; syscon { - /* AP system controller registers */ + compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; + interrupt-parent = <&pic>; + /* These are the logical module IRQs */ + interrupts = <9>, <10>, <11>, <12>; }; timer0: timer@13000000 { diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index ff1aea0ee043..7deb3a3182b4 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -9,29 +9,28 @@ model = "ARM Integrator/CP"; compatible = "arm,integrator-cp"; - aliases { - arm,timer-primary = &timer2; - arm,timer-secondary = &timer1; - }; - chosen { bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; - cpcon { - /* CP controller registers */ + syscon { + compatible = "arm,integrator-cp-syscon"; reg = <0xcb000000 0x100>; }; timer0: timer@13000000 { + /* TIMER0 runs @ 25MHz */ compatible = "arm,integrator-cp-timer"; + status = "disabled"; }; timer1: timer@13000100 { + /* TIMER1 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; }; timer2: timer@13000200 { + /* TIMER2 runs @ 1MHz */ compatible = "arm,integrator-cp-timer"; }; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi new file mode 100644 index 000000000000..d6713b113258 --- /dev/null +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -0,0 +1,821 @@ +/* + * Device Tree Source for Keystone 2 clock tree + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + refclkmain: refclkmain { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <122880000>; + clock-output-names = "refclk-main"; + }; + + mainpllclk: mainpllclk@2310110 { + #clock-cells = <0>; + compatible = "ti,keystone,main-pll-clock"; + clocks = <&refclkmain>; + reg = <0x02620350 4>, <0x02310110 4>; + reg-names = "control", "multiplier"; + fixed-postdiv = <2>; + }; + + papllclk: papllclk@2620358 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "pa-pll-clk"; + reg = <0x02620358 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + ddr3allclk: ddr3apllclk@2620360 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "ddr-3a-pll-clk"; + reg = <0x02620360 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + ddr3bllclk: ddr3bpllclk@2620368 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "ddr-3b-pll-clk"; + reg = <0x02620368 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + armpllclk: armpllclk@2620370 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-clock"; + clocks = <&refclkmain>; + clock-output-names = "arm-pll-clk"; + reg = <0x02620370 4>; + reg-names = "control"; + fixed-postdiv = <6>; + }; + + mainmuxclk: mainmuxclk@2310108 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-mux-clock"; + clocks = <&mainpllclk>, <&refclkmain>; + reg = <0x02310108 4>; + bit-shift = <23>; + bit-mask = <1>; + clock-output-names = "mainmuxclk"; + }; + + chipclk1: chipclk1 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&mainmuxclk>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "chipclk1"; + }; + + chipclk1rstiso: chipclk1rstiso { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&mainmuxclk>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso"; + }; + + gemtraceclk: gemtraceclk@2310120 { + #clock-cells = <0>; + compatible = "ti,keystone,pll-divider-clock"; + clocks = <&mainmuxclk>; + reg = <0x02310120 4>; + bit-shift = <0>; + bit-mask = <8>; + clock-output-names = "gemtraceclk"; + }; + + chipstmxptclk: chipstmxptclk { + #clock-cells = <0>; + compatible = "ti,keystone,pll-divider-clock"; + clocks = <&mainmuxclk>; + reg = <0x02310164 4>; + bit-shift = <0>; + bit-mask = <8>; + clock-output-names = "chipstmxptclk"; + }; + + chipclk12: chipclk12 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "chipclk12"; + }; + + chipclk13: chipclk13 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "chipclk13"; + }; + + chipclk14: chipclk14 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "chipclk14"; + }; + + chipclk16: chipclk16 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "chipclk16"; + }; + + chipclk112: chipclk112 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "chipclk112"; + }; + + chipclk124: chipclk124 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "chipclk114"; + }; + + chipclk1rstiso13: chipclk1rstiso13 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso13"; + }; + + chipclk1rstiso14: chipclk1rstiso14 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso14"; + }; + + chipclk1rstiso16: chipclk1rstiso16 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso16"; + }; + + chipclk1rstiso112: chipclk1rstiso112 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&chipclk1rstiso>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "chipclk1rstiso112"; + }; + + clkmodrst0: clkmodrst0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "modrst0"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + + clkusb: clkusb { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "usb"; + reg = <0x02350008 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkaemifspi: clkaemifspi { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "aemif-spi"; + reg = <0x0235000c 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + + clkdebugsstrc: clkdebugsstrc { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "debugss-trc"; + reg = <0x02350014 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clktetbtrc: clktetbtrc { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tetb-trc"; + reg = <0x02350018 0xb00>, <0x02350004 0x400>; + reg-names = "control", "domain"; + domain-id = <1>; + }; + + clkpa: clkpa { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk16>; + clock-output-names = "pa"; + reg = <0x0235001c 0xb00>, <0x02350008 0x400>; + reg-names = "control", "domain"; + domain-id = <2>; + }; + + clkcpgmac: clkcpgmac { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkpa>; + clock-output-names = "cpgmac"; + reg = <0x02350020 0xb00>, <0x02350008 0x400>; + reg-names = "control", "domain"; + domain-id = <2>; + }; + + clksa: clksa { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkpa>; + clock-output-names = "sa"; + reg = <0x02350024 0xb00>, <0x02350008 0x400>; + reg-names = "control", "domain"; + domain-id = <2>; + }; + + clkpcie: clkpcie { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "pcie"; + reg = <0x02350028 0xb00>, <0x0235000c 0x400>; + reg-names = "control", "domain"; + domain-id = <3>; + }; + + clksrio: clksrio { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1rstiso13>; + clock-output-names = "srio"; + reg = <0x0235002c 0xb00>, <0x02350010 0x400>; + reg-names = "control", "domain"; + domain-id = <4>; + }; + + clkhyperlink0: clkhyperlink0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "hyperlink-0"; + reg = <0x02350030 0xb00>, <0x02350014 0x400>; + reg-names = "control", "domain"; + domain-id = <5>; + }; + + clksr: clksr { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1rstiso112>; + clock-output-names = "sr"; + reg = <0x02350034 0xb00>, <0x02350018 0x400>; + reg-names = "control", "domain"; + domain-id = <6>; + }; + + clkmsmcsram: clkmsmcsram { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "msmcsram"; + reg = <0x02350038 0xb00>, <0x0235001c 0x400>; + reg-names = "control", "domain"; + domain-id = <7>; + }; + + clkgem0: clkgem0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem0"; + reg = <0x0235003c 0xb00>, <0x02350020 0x400>; + reg-names = "control", "domain"; + domain-id = <8>; + }; + + clkgem1: clkgem1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem1"; + reg = <0x02350040 0xb00>, <0x02350024 0x400>; + reg-names = "control", "domain"; + domain-id = <9>; + }; + + clkgem2: clkgem2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem2"; + reg = <0x02350044 0xb00>, <0x02350028 0x400>; + reg-names = "control", "domain"; + domain-id = <10>; + }; + + clkgem3: clkgem3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem3"; + reg = <0x02350048 0xb00>, <0x0235002c 0x400>; + reg-names = "control", "domain"; + domain-id = <11>; + }; + + clkgem4: clkgem4 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem4"; + reg = <0x0235004c 0xb00>, <0x02350030 0x400>; + reg-names = "control", "domain"; + domain-id = <12>; + }; + + clkgem5: clkgem5 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem5"; + reg = <0x02350050 0xb00>, <0x02350034 0x400>; + reg-names = "control", "domain"; + domain-id = <13>; + }; + + clkgem6: clkgem6 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem6"; + reg = <0x02350054 0xb00>, <0x02350038 0x400>; + reg-names = "control", "domain"; + domain-id = <14>; + }; + + clkgem7: clkgem7 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk1>; + clock-output-names = "gem7"; + reg = <0x02350058 0xb00>, <0x0235003c 0x400>; + reg-names = "control", "domain"; + domain-id = <15>; + }; + + clkddr30: clkddr30 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "ddr3-0"; + reg = <0x0235005c 0xb00>, <0x02350040 0x400>; + reg-names = "control", "domain"; + domain-id = <16>; + }; + + clkddr31: clkddr31 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "ddr3-1"; + reg = <0x02350060 0xb00>, <0x02350040 0x400>; + reg-names = "control", "domain"; + domain-id = <16>; + }; + + clktac: clktac { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tac"; + reg = <0x02350064 0xb00>, <0x02350044 0x400>; + reg-names = "control", "domain"; + domain-id = <17>; + }; + + clkrac01: clktac01 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "rac-01"; + reg = <0x02350068 0xb00>, <0x02350044 0x400>; + reg-names = "control", "domain"; + domain-id = <17>; + }; + + clkrac23: clktac23 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "rac-23"; + reg = <0x0235006c 0xb00>, <0x02350048 0x400>; + reg-names = "control", "domain"; + domain-id = <18>; + }; + + clkfftc0: clkfftc0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-0"; + reg = <0x02350070 0xb00>, <0x0235004c 0x400>; + reg-names = "control", "domain"; + domain-id = <19>; + }; + + clkfftc1: clkfftc1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-1"; + reg = <0x02350074 0xb00>, <0x023504c0 0x400>; + reg-names = "control", "domain"; + domain-id = <19>; + }; + + clkfftc2: clkfftc2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-2"; + reg = <0x02350078 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkfftc3: clkfftc3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-3"; + reg = <0x0235007c 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkfftc4: clkfftc4 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-4"; + reg = <0x02350080 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkfftc5: clkfftc5 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "fftc-5"; + reg = <0x02350084 0xb00>, <0x02350050 0x400>; + reg-names = "control", "domain"; + domain-id = <20>; + }; + + clkaif: clkaif { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "aif"; + reg = <0x02350088 0xb00>, <0x02350054 0x400>; + reg-names = "control", "domain"; + domain-id = <21>; + }; + + clktcp3d0: clktcp3d0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-0"; + reg = <0x0235008c 0xb00>, <0x02350058 0x400>; + reg-names = "control", "domain"; + domain-id = <22>; + }; + + clktcp3d1: clktcp3d1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-1"; + reg = <0x02350090 0xb00>, <0x02350058 0x400>; + reg-names = "control", "domain"; + domain-id = <22>; + }; + + clktcp3d2: clktcp3d2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-2"; + reg = <0x02350094 0xb00>, <0x0235005c 0x400>; + reg-names = "control", "domain"; + domain-id = <23>; + }; + + clktcp3d3: clktcp3d3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "tcp3d-3"; + reg = <0x02350098 0xb00>, <0x0235005c 0x400>; + reg-names = "control", "domain"; + domain-id = <23>; + }; + + clkvcp0: clkvcp0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-0"; + reg = <0x0235009c 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp1: clkvcp1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-1"; + reg = <0x023500a0 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp2: clkvcp2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-2"; + reg = <0x023500a4 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp3: clkvcp3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-3"; + reg = <0x0235000a8 0xb00>, <0x02350060 0x400>; + reg-names = "control", "domain"; + domain-id = <24>; + }; + + clkvcp4: clkvcp4 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-4"; + reg = <0x023500ac 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkvcp5: clkvcp5 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-5"; + reg = <0x023500b0 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkvcp6: clkvcp6 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-6"; + reg = <0x023500b4 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkvcp7: clkvcp7 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "vcp-7"; + reg = <0x023500b8 0xb00>, <0x02350064 0x400>; + reg-names = "control", "domain"; + domain-id = <25>; + }; + + clkbcp: clkbcp { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "bcp"; + reg = <0x023500bc 0xb00>, <0x02350068 0x400>; + reg-names = "control", "domain"; + domain-id = <26>; + }; + + clkdxb: clkdxb { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "dxb"; + reg = <0x023500c0 0xb00>, <0x0235006c 0x400>; + reg-names = "control", "domain"; + domain-id = <27>; + }; + + clkhyperlink1: clkhyperlink1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk12>; + clock-output-names = "hyperlink-1"; + reg = <0x023500c4 0xb00>, <0x02350070 0x400>; + reg-names = "control", "domain"; + domain-id = <28>; + }; + + clkxge: clkxge { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&chipclk13>; + clock-output-names = "xge"; + reg = <0x023500c8 0xb00>, <0x02350074 0x400>; + reg-names = "control", "domain"; + domain-id = <29>; + }; + + clkwdtimer0: clkwdtimer0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer0"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkwdtimer1: clkwdtimer1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer1"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkwdtimer2: clkwdtimer2 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer2"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkwdtimer3: clkwdtimer3 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "timer3"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkuart0: clkuart0 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "uart0"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkuart1: clkuart1 { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "uart1"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkaemif: clkaemif { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkaemifspi>; + clock-output-names = "aemif"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkusim: clkusim { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "usim"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clki2c: clki2c { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "i2c"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkspi: clkspi { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkaemifspi>; + clock-output-names = "spi"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkgpio: clkgpio { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "gpio"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; + + clkkeymgr: clkkeymgr { + #clock-cells = <0>; + compatible = "ti,keystone,psc-clock"; + clocks = <&clkmodrst0>; + clock-output-names = "keymgr"; + reg = <0x02350000 0xb00>, <0x02350000 0x400>; + reg-names = "control", "domain"; + domain-id = <0>; + }; +}; diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts index a68e34bbecb2..100bdf52b847 100644 --- a/arch/arm/boot/dts/keystone.dts +++ b/arch/arm/boot/dts/keystone.dts @@ -100,13 +100,15 @@ reg = <0x023100e8 4>; /* pll reset control reg */ }; + /include/ "keystone-clocks.dtsi" + uart0: serial@02530c00 { compatible = "ns16550a"; current-speed = <115200>; reg-shift = <2>; reg-io-width = <4>; reg = <0x02530c00 0x100>; - clock-frequency = <133120000>; + clocks = <&clkuart0>; interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; }; @@ -116,9 +118,66 @@ reg-shift = <2>; reg-io-width = <4>; reg = <0x02531000 0x100>; - clock-frequency = <133120000>; + clocks = <&clkuart1>; interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>; }; + i2c0: i2c@2530000 { + compatible = "ti,davinci-i2c"; + reg = <0x02530000 0x400>; + clock-frequency = <100000>; + clocks = <&clki2c>; + interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; + }; + + i2c1: i2c@2530400 { + compatible = "ti,davinci-i2c"; + reg = <0x02530400 0x400>; + clock-frequency = <100000>; + clocks = <&clki2c>; + interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>; + }; + + i2c2: i2c@2530800 { + compatible = "ti,davinci-i2c"; + reg = <0x02530800 0x400>; + clock-frequency = <100000>; + clocks = <&clki2c>; + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + }; + + spi0: spi@21000400 { + compatible = "ti,dm6441-spi"; + reg = <0x21000400 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkspi>; + }; + + spi1: spi@21000600 { + compatible = "ti,dm6441-spi"; + reg = <0x21000600 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkspi>; + }; + + spi2: spi@21000800 { + compatible = "ti,dm6441-spi"; + reg = <0x21000800 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkspi>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 2e88095ea67b..31a632f7effb 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -192,6 +192,8 @@ &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index b5493296d103..3007e79c9cd6 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -81,6 +81,8 @@ &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 8f1abec78275..a461d2fd1fb0 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -76,6 +76,8 @@ &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; mode = <3>; power = <50>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index a5b6e88a41a5..a1e05853afcd 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -536,7 +536,8 @@ usb2_phy: usb2phy@4a0ad080 { compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb2phy>; + #phy-cells = <0>; }; }; @@ -660,12 +661,16 @@ }; }; - omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,omap-control-usb"; - reg = <0x4a002300 0x4>, - <0x4a00233c 0x4>; - reg-names = "control_dev_conf", "otghs_control"; - ti,type = <1>; + omap_control_usb2phy: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usbotg: control-phy@4a00233c { + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; }; usb_otg_hs: usb_otg_hs@4a0ab000 { @@ -675,10 +680,12 @@ interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; multipoint = <1>; num-eps = <16>; ram-bits = <12>; - ti,has-mailbox; + ctrl-module = <&omap_control_usbotg>; }; aes: aes@4b501000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a791846421d1..fc3fad563861 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -645,12 +645,16 @@ hw-caps-temp-alert; }; - omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,omap-control-usb"; - reg = <0x4a002300 0x4>, - <0x4a002370 0x4>; - reg-names = "control_dev_conf", "phy_power_usb"; - ti,type = <2>; + omap_control_usb2phy: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; }; usb3: omap_dwc3@4a020000 { @@ -682,7 +686,7 @@ usb2_phy: usb2phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb2phy>; }; usb3_phy: usb3phy@4a084400 { @@ -691,7 +695,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb3phy>; }; }; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 386d42870215..386d42870215 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 93e9f7e0b7ad..93e9f7e0b7ad 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts new file mode 100644 index 000000000000..1fb20f2333cc --- /dev/null +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -0,0 +1,31 @@ +/* + * Device Tree Source for the Genmai board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r7s72100.dtsi" + +/ { + model = "Genmai"; + compatible = "renesas,genmai", "renesas,r7s72100"; + + chosen { + bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory { + device_type = "memory"; + reg = <0x08000000 0x08000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi new file mode 100644 index 000000000000..46b82aa7dc4e --- /dev/null +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -0,0 +1,36 @@ +/* + * Device Tree Source for the r7s72100 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r7s72100"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + gic: interrupt-controller@e8201000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8201000 0x1000>, + <0xe8202000 0x1000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts new file mode 100644 index 000000000000..1ce5250ec278 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -0,0 +1,32 @@ +/* + * Device Tree Source for the Koelsch board + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7791.dtsi" + +/ { + model = "Koelsch"; + compatible = "renesas,koelsch", "renesas,r8a7791"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts new file mode 100644 index 000000000000..035df4053c21 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "bq Curie 2"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + soc { + uart0: serial@10124000 { + status = "okay"; + }; + + uart1: serial@10126000 { + status = "okay"; + }; + + uart2: serial@20064000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "okay"; + }; + + uart3: serial@20068000 { + status = "okay"; + }; + + vcc_sd0: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + }; + + dwmmc@10214000 { /* sdmmc */ + num-slots = <1>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; + vmmc-supply = <&vcc_sd0>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + dwmmc@10218000 { /* wifi */ + num-slots = <1>; + status = "okay"; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + button@1 { + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + linux,code = <104>; + label = "GPIO Key Vol-"; + linux,input-type = <1>; + gpio-key,wakeup = <0>; + debounce-interval = <100>; + }; + /* VOL+ comes somehow thru the ADC */ + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 56bfac93d3f6..be5d2b09a363 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -14,15 +14,12 @@ */ #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> -#include "skeleton.dtsi" +#include "rk3xxx.dtsi" #include "rk3066a-clocks.dtsi" / { compatible = "rockchip,rk3066a"; - interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -43,33 +40,6 @@ }; soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - gic: interrupt-controller@1013d000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1013d000 0x1000>, - <0x1013c100 0x0100>; - }; - - L2: l2-cache-controller@10138000 { - compatible = "arm,pl310-cache"; - reg = <0x10138000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - local-timer@1013c600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x1013c600 0x20>; - interrupts = <GIC_PPI 13 0x304>; - clocks = <&dummy150m>; - }; - timer@20038000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x20038000 0x100>; @@ -191,17 +161,14 @@ uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart0_cts: uart0-cts { rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart0_rts: uart0-rts { rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; @@ -209,17 +176,14 @@ uart1_xfer: uart1-xfer { rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart1_cts: uart1-cts { rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart1_rts: uart1-rts { rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; @@ -227,7 +191,6 @@ uart2_xfer: uart2-xfer { rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; /* no rts / cts for uart2 */ }; @@ -236,44 +199,36 @@ uart3_xfer: uart3-xfer { rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart3_cts: uart3-cts { rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; uart3_rts: uart3-rts { rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; sd0 { sd0_clk: sd0-clk { rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_cmd: sd0-cmd { rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_cd: sd0-cd { rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_wp: sd0-wp { rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_bus1: sd0-bus-width1 { rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd0_bus4: sd0-bus-width4 { @@ -281,34 +236,28 @@ <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; sd1 { sd1_clk: sd1-clk { rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_cmd: sd1-cmd { rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_cd: sd1-cd { rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_wp: sd1-wp { rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_bus1: sd1-bus-width1 { rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; sd1_bus4: sd1-bus-width4 { @@ -316,75 +265,8 @@ <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; - rockchip,config = <&pcfg_pull_default>; }; }; }; - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 8>; - status = "disabled"; - }; - - uart1: serial@10126000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10126000 0x400>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 10>; - status = "disabled"; - }; - - uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 12>; - status = "disabled"; - }; - - uart3: serial@20068000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20068000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 14>; - status = "disabled"; - }; - - dwmmc@10214000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10214000 0x1000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 10>, <&clk_gates2 11>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; - - dwmmc@10218000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10218000 0x1000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 11>, <&clk_gates2 13>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi new file mode 100644 index 000000000000..b1b92dc245ce --- /dev/null +++ b/arch/arm/boot/dts/rk3188-clocks.dtsi @@ -0,0 +1,289 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + dummy48m: dummy48m { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + dummy150m: dummy150m { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + clk_gates0: gate-clk@200000d0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d0 0x4>; + clocks = <&dummy150m>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_core_periph", "gate_cpu_gpll", + "gate_ddrphy", "gate_aclk_cpu", + "gate_hclk_cpu", "gate_pclk_cpu", + "gate_atclk_cpu", "gate_aclk_core", + "reserved", "gate_i2s0", + "gate_i2s0_frac", "reserved", + "reserved", "gate_spdif", + "gate_spdif_frac", "gate_testclk"; + + #clock-cells = <1>; + }; + + clk_gates1: gate-clk@200000d4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d4 0x4>; + clocks = <&xin24m>, <&xin24m>, + <&xin24m>, <&dummy>, + <&dummy>, <&xin24m>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_timer0", "gate_timer1", + "gate_timer3", "gate_jtag", + "gate_aclk_lcdc1_src", "gate_otgphy0", + "gate_otgphy1", "gate_ddr_gpll", + "gate_uart0", "gate_frac_uart0", + "gate_uart1", "gate_frac_uart1", + "gate_uart2", "gate_frac_uart2", + "gate_uart3", "gate_frac_uart3"; + + #clock-cells = <1>; + }; + + clk_gates2: gate-clk@200000d8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d8 0x4>; + clocks = <&clk_gates2 1>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&clk_gates2 3>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_periph_src", "gate_aclk_periph", + "gate_hclk_periph", "gate_pclk_periph", + "gate_smc", "gate_mac", + "gate_hsadc", "gate_hsadc_frac", + "gate_saradc", "gate_spi0", + "gate_spi1", "gate_mmc0", + "gate_mac_lbtest", "gate_mmc1", + "gate_emmc", "reserved"; + + #clock-cells = <1>; + }; + + clk_gates3: gate-clk@200000dc { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000dc 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&xin24m>, <&xin24m>, + <&dummy>, <&dummy>, + <&xin24m>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", + "gate_dclk_lcdc1", "gate_pclkin_cif0", + "gate_timer2", "gate_timer4", + "gate_hsicphy", "gate_cif0_out", + "gate_timer5", "gate_aclk_vepu", + "gate_hclk_vepu", "gate_aclk_vdpu", + "gate_hclk_vdpu", "reserved", + "gate_timer6", "gate_aclk_gpu_src"; + + #clock-cells = <1>; + }; + + clk_gates4: gate-clk@200000e0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e0 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates2 3>, + <&clk_gates2 1>, <&clk_gates2 1>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 3>, <&dummy>, + <&clk_gates0 3>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", + "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", + "gate_aclk_pei_niu", "gate_hclk_usb_peri", + "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", + "gate_hclk_cpubus", "gate_hclk_ahb2apb", + "gate_aclk_strc_sys", "reserved", + "gate_aclk_intmem", "reserved", + "gate_hclk_imem1", "gate_hclk_imem0"; + + #clock-cells = <1>; + }; + + clk_gates5: gate-clk@200000e4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e4 0x4>; + clocks = <&clk_gates0 3>, <&clk_gates2 1>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 4>, <&clk_gates0 5>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates4 5>; + + clock-output-names = + "gate_aclk_dmac1", "gate_aclk_dmac2", + "gate_pclk_efuse", "gate_pclk_tzpc", + "gate_pclk_grf", "gate_pclk_pmu", + "gate_hclk_rom", "gate_pclk_ddrupctl", + "gate_aclk_smc", "gate_hclk_nandc", + "gate_hclk_mmc0", "gate_hclk_mmc1", + "gate_hclk_emmc", "gate_hclk_otg0"; + + #clock-cells = <1>; + }; + + clk_gates6: gate-clk@200000e8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e8 0x4>; + clocks = <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&dummy>, <&dummy>, + <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>; + + clock-output-names = + "gate_aclk_lcdc0", "gate_hclk_lcdc0", + "gate_hclk_lcdc1", "gate_aclk_lcdc1", + "gate_hclk_cif0", "gate_aclk_cif0", + "reserved", "reserved", + "gate_aclk_ipp", "gate_hclk_ipp", + "gate_hclk_rga", "gate_aclk_rga", + "gate_hclk_vio_bus", "gate_aclk_vio0"; + + #clock-cells = <1>; + }; + + clk_gates7: gate-clk@200000ec { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000ec 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates0 4>, + <&clk_gates0 4>, <&dummy>, + <&dummy>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates0 5>, + <&dummy>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>; + + clock-output-names = + "gate_hclk_emac", "gate_hclk_spdif", + "gate_hclk_i2s0_2ch", "gate_hclk_otg1", + "gate_hclk_hsic", "gate_hclk_hsadc", + "gate_hclk_pidf", "gate_pclk_timer0", + "reserved", "gate_pclk_timer2", + "gate_pclk_pwm01", "gate_pclk_pwm23", + "gate_pclk_spi0", "gate_pclk_spi1", + "gate_pclk_saradc", "gate_pclk_wdt"; + + #clock-cells = <1>; + }; + + clk_gates8: gate-clk@200000f0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f0 0x4>; + clocks = <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&dummy>; + + clock-output-names = + "gate_pclk_uart0", "gate_pclk_uart1", + "gate_pclk_uart2", "gate_pclk_uart3", + "gate_pclk_i2c0", "gate_pclk_i2c1", + "gate_pclk_i2c2", "gate_pclk_i2c3", + "gate_pclk_i2c4", "gate_pclk_gpio0", + "gate_pclk_gpio1", "gate_pclk_gpio2", + "gate_pclk_gpio3", "gate_aclk_gps"; + + #clock-cells = <1>; + }; + + clk_gates9: gate-clk@200000f4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f4 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_clk_core_dbg", "gate_pclk_dbg", + "gate_clk_trace", "gate_atclk", + "gate_clk_l2c", "gate_aclk_vio1", + "gate_pclk_publ", "gate_aclk_gpu"; + + #clock-cells = <1>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts new file mode 100644 index 000000000000..3ba1968a70ab --- /dev/null +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3188.dtsi" + +/ { + model = "Radxa Rock"; + + memory { + reg = <0x60000000 0x80000000>; + }; + + soc { + uart0: serial@10124000 { + status = "okay"; + }; + + uart1: serial@10126000 { + status = "okay"; + }; + + uart2: serial@20064000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "okay"; + }; + + uart3: serial@20068000 { + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + yellow { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + sleep { + gpios = <&gpio0 15 0>; + default-state = "off"; + }; + }; + + }; +}; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi new file mode 100644 index 000000000000..1a26b03b3649 --- /dev/null +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -0,0 +1,253 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3xxx.dtsi" +#include "rk3188-clocks.dtsi" + +/ { + compatible = "rockchip,rk3188"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x3>; + }; + }; + + soc { + global-timer@1013c200 { + interrupts = <GIC_PPI 11 0xf04>; + }; + + local-timer@1013c600 { + interrupts = <GIC_PPI 13 0xf04>; + }; + + pinctrl@20008000 { + compatible = "rockchip,rk3188-pinctrl"; + reg = <0x20008000 0xa0>, + <0x20008164 0x1a0>; + reg-names = "base", "pull"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@0x2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>, + <0x20004064 0x8>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@0x2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 11>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 12>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg_pull_up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg_pull_down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_pwr: sd0-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi new file mode 100644 index 000000000000..0fcbcfd67de2 --- /dev/null +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + L2: l2-cache-controller@10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + global-timer@1013c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1013c200 0x20>; + interrupts = <GIC_PPI 11 0x304>; + clocks = <&dummy150m>; + }; + + local-timer@1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = <GIC_PPI 13 0x304>; + clocks = <&dummy150m>; + }; + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 8>; + status = "disabled"; + }; + + uart1: serial@10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 10>; + status = "disabled"; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 12>; + status = "disabled"; + }; + + uart3: serial@20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 14>; + status = "disabled"; + }; + + dwmmc@10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 10>, <&clk_gates2 11>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + dwmmc@10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 11>, <&clk_gates2 13>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b7f49615120d..5cdaba4cea86 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -31,7 +31,6 @@ gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; - tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -105,15 +104,6 @@ status = "disabled"; }; - can0: can@f000c000 { - compatible = "atmel,at91sam9x5-can"; - reg = <0xf000c000 0x300>; - interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can0_rx_tx>; - status = "disabled"; - }; - tcb0: timer@f0010000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; @@ -166,15 +156,6 @@ status = "disabled"; }; - macb0: ethernet@f0028000 { - compatible = "cdns,pc302-gem", "cdns,gem"; - reg = <0xf0028000 0x100>; - interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; - status = "disabled"; - }; - isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; @@ -195,19 +176,6 @@ #size-cells = <0>; }; - mmc2: mmc@f8004000 { - compatible = "atmel,hsmci"; - reg = <0xf8004000 0x600>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; - dma-names = "rxtx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - spi1: spi@f8008000 { #address-cells = <1>; #size-cells = <0>; @@ -231,20 +199,6 @@ status = "disabled"; }; - can1: can@f8010000 { - compatible = "atmel,at91sam9x5-can"; - reg = <0xf8010000 0x300>; - interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1_rx_tx>; - }; - - tcb1: timer@f8014000 { - compatible = "atmel,at91sam9x5-tcb"; - reg = <0xf8014000 0x100>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - }; - adc0: adc@f8018000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf8018000 0x100>; @@ -341,15 +295,6 @@ status = "disabled"; }; - macb1: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf802c000 0x100>; - interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb1_rmii>; - status = "disabled"; - }; - sha@f8034000 { compatible = "atmel,sam9g46-sha"; reg = <0xf8034000 0x100>; @@ -474,22 +419,6 @@ }; }; - can0 { - pinctrl_can0_rx_tx: can0_rx_tx { - atmel,pins = - <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ - AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ - }; - }; - - can1 { - pinctrl_can1_rx_tx: can1_rx_tx { - atmel,pins = - <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ - AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ - }; - }; - dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -537,107 +466,6 @@ }; }; - lcd { - pinctrl_lcd: lcd-0 { - atmel,pins = - <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ - AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ - AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ - AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ - AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ - AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ - AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ - AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ - AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ - AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ - AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ - AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ - AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ - AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ - AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ - AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ - AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ - AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ - AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ - AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ - AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ - AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ - AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ - AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ - AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ - AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ - AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ - AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ - AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ - }; - }; - - macb0 { - pinctrl_macb0_data_rgmii: macb0_data_rgmii { - atmel,pins = - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ - }; - pinctrl_macb0_data_gmii: macb0_data_gmii { - atmel,pins = - <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ - AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ - AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ - AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ - AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ - AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ - AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ - AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ - }; - pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { - atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ - AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ - }; - pinctrl_macb0_signal_gmii: macb0_signal_gmii { - atmel,pins = - <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ - AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ - }; - - }; - - macb1 { - pinctrl_macb1_rmii: macb1_rmii-0 { - atmel,pins = - <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ - AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ - AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ - AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ - AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ - AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ - AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ - AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ - AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ - AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ - }; - }; - mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = @@ -675,21 +503,6 @@ }; }; - mmc2 { - pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { - atmel,pins = - <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ - AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ - AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ - }; - pinctrl_mmc2_dat1_3: mmc2_dat1_3 { - atmel,pins = - <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ - }; - }; - nand0 { pinctrl_nand0_ale_cle: nand0_ale_cle-0 { atmel,pins = @@ -748,22 +561,6 @@ }; }; - uart0 { - pinctrl_uart0: uart0-0 { - atmel,pins = - <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ - }; - }; - - uart1 { - pinctrl_uart1: uart1-0 { - atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ - }; - }; - usart0 { pinctrl_usart0: usart0-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi new file mode 100644 index 000000000000..7997dc9863ed --- /dev/null +++ b/arch/arm/boot/dts/sama5d31.dtsi @@ -0,0 +1,16 @@ +/* + * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index 027bac7510b6..04eec0dfcf7d 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -7,12 +7,13 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d31.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D31-EK"; - compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi new file mode 100644 index 000000000000..39f832253caf --- /dev/null +++ b/arch/arm/boot/dts/sama5d33.dtsi @@ -0,0 +1,14 @@ +/* + * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_gmac.dtsi" + +/ { + compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index 99bd0c8e0471..cbd6a3ff1545 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -7,12 +7,13 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d33.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D33-EK"; - compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi new file mode 100644 index 000000000000..89cda2c0da39 --- /dev/null +++ b/arch/arm/boot/dts/sama5d34.dtsi @@ -0,0 +1,16 @@ +/* + * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_mci2.dtsi" + +/ { + compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index fb8ee11cf282..878aa164275a 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -7,12 +7,13 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d34.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" / { model = "Atmel SAMA5D34-EK"; - compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi new file mode 100644 index 000000000000..d20cd71b5f0e --- /dev/null +++ b/arch/arm/boot/dts/sama5d35.dtsi @@ -0,0 +1,18 @@ +/* + * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_uart.dtsi" +#include "sama5d3_tcb1.dtsi" + +/ { + compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index 509a53d9cc7b..9089c7c6cea8 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -7,11 +7,12 @@ * Licensed under GPLv2 or later. */ /dts-v1/; +#include "sama5d35.dtsi" #include "sama5d3xmb.dtsi" / { model = "Atmel SAMA5D35-EK"; - compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi new file mode 100644 index 000000000000..8ed3260cef66 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -0,0 +1,54 @@ +/* + * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * CAN support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + <AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */ + AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB14 periph B RX, conflicts with GCRS */ + AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B TX, conflicts with GCOL */ + }; + }; + + }; + + can0: can@f000c000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf000c000 0x300>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; + }; + + can1: can@f8010000 { + compatible = "atmel,at91sam9x5-can"; + reg = <0xf8010000 0x300>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi new file mode 100644 index 000000000000..4d4f351f1f9f --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -0,0 +1,44 @@ +/* + * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * Ethernet. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC0 periph A ETX0, conflicts with TIOA3 */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A ETX1, conflicts with TIOB3 */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A ERX0, conflicts with TCLK3 */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A ERX1, conflicts with TIOA4 */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC4 periph A ETXEN, conflicts with TIOB4 */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 periph A ECRSDV,conflicts with TCLK4 */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A ERXER, conflicts with TIOA5 */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A EREFCK, conflicts with TIOB5 */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A EMDC, conflicts with TCLK5 */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC9 periph A EMDIO */ + }; + }; + }; + + macb1: ethernet@f802c000 { + compatible = "cdns,at32ap7000-macb", "cdns,macb"; + reg = <0xf802c000 0x100>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi new file mode 100644 index 000000000000..0ba8be30ccd8 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -0,0 +1,77 @@ +/* + * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * Gigabit Ethernet. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + macb0 { + pinctrl_macb0_data_rgmii: macb0_data_rgmii { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A GTX0, conflicts with PWMH0 */ + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A GTX1, conflicts with PWML0 */ + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A GTX2, conflicts with TK1 */ + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A GTX3, conflicts with TF1 */ + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A GRX0, conflicts with PWMH1 */ + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A GRX1, conflicts with PWML1 */ + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A GRX2, conflicts with TD1 */ + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A GRX3, conflicts with RK1 */ + }; + pinctrl_macb0_data_gmii: macb0_data_gmii { + atmel,pins = + <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB19 periph B GTX4, conflicts with MCI1_CDA */ + AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB20 periph B GTX5, conflicts with MCI1_DA0 */ + AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB21 periph B GTX6, conflicts with MCI1_DA1 */ + AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB22 periph B GTX7, conflicts with MCI1_DA2 */ + AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB23 periph B GRX4, conflicts with MCI1_DA3 */ + AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB24 periph B GRX5, conflicts with MCI1_CK */ + AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB25 periph B GRX6, conflicts with SCK1 */ + AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB26 periph B GRX7, conflicts with CTS1 */ + }; + pinctrl_macb0_signal_rgmii: macb0_signal_rgmii { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A GTXCK, conflicts with PWMH2 */ + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A G125CK */ + }; + pinctrl_macb0_signal_gmii: macb0_signal_gmii { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A GTXEN, conflicts with PWML2 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB10 periph A GTXER, conflicts with RF1 */ + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A GRXCK, conflicts with RD1 */ + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A GRXDV, conflicts with PWMH3 */ + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A GRXER, conflicts with PWML3 */ + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A GCRS, conflicts with CANRX1 */ + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A GCOL, conflicts with CANTX1 */ + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A GMDC */ + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB17 periph A GMDIO */ + AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB27 periph B G125CKO */ + }; + + }; + }; + + macb0: ethernet@f0028000 { + compatible = "cdns,pc302-gem", "cdns,gem"; + reg = <0xf0028000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi new file mode 100644 index 000000000000..01f52a79f8ba --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi @@ -0,0 +1,55 @@ +/* + * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * LCD support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + lcd { + pinctrl_lcd: lcd-0 { + atmel,pins = + <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA24 periph A LCDPWM */ + AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA26 periph A LCDVSYNC */ + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA27 periph A LCDHSYNC */ + AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA25 periph A LCDDISP */ + AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA29 periph A LCDDEN */ + AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA28 periph A LCDPCK */ + AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A LCDD0 pin */ + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A LCDD1 pin */ + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA2 periph A LCDD2 pin */ + AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA3 periph A LCDD3 pin */ + AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA4 periph A LCDD4 pin */ + AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA5 periph A LCDD5 pin */ + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA6 periph A LCDD6 pin */ + AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA7 periph A LCDD7 pin */ + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA8 periph A LCDD8 pin */ + AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A LCDD9 pin */ + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA10 periph A LCDD10 pin */ + AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A LCDD11 pin */ + AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A LCDD12 pin */ + AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA13 periph A LCDD13 pin */ + AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA14 periph A LCDD14 pin */ + AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA15 periph A LCDD15 pin */ + AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC14 periph C LCDD16 pin */ + AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC13 periph C LCDD17 pin */ + AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC12 periph C LCDD18 pin */ + AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC11 periph C LCDD19 pin */ + AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC10 periph C LCDD20 pin */ + AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC15 periph C LCDD21 pin */ + AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PE27 periph C LCDD22 pin */ + AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PE28 periph C LCDD23 pin */ + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi new file mode 100644 index 000000000000..38e88e39e551 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -0,0 +1,47 @@ +/* + * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 3 MMC ports + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + mmc2 { + pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A MCI2_CK, conflicts with PCK2 */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC10 periph A MCI2_CDA with pullup */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC11 periph A MCI2_DA0 with pullup */ + }; + pinctrl_mmc2_dat1_3: mmc2_dat1_3 { + atmel,pins = + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + }; + }; + }; + + mmc2: mmc@f8004000 { + compatible = "atmel,hsmci"; + reg = <0xf8004000 0x600>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi new file mode 100644 index 000000000000..5264bb4a6998 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -0,0 +1,27 @@ +/* + * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * 2 TC blocks. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + tcb1 = &tcb1; + }; + + ahb { + apb { + tcb1: timer@f8014000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8014000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi new file mode 100644 index 000000000000..98fcb2d57446 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -0,0 +1,53 @@ +/* + * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with + * UART support + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pinctrl@fffff200 { + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + }; + }; + }; + + uart0: serial@f0024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf0024000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + uart1: serial@f8028000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8028000 0x200>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 31ed9e3bb649..726a0f35100c 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -6,7 +6,6 @@ * * Licensed under GPLv2 or later. */ -#include "sama5d3.dtsi" / { compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 9169d3025f39..79425e3836ce 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -653,6 +653,7 @@ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; clocks = <&hclksmc>; status = "okay"; + timings = /bits/ 8 <0 0 0 0x10 0x0a 0>; partition@0 { label = "X-Loader(NAND)"; @@ -707,8 +708,14 @@ pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; stw4811@2d { - compatible = "st,stw4811"; - reg = <0x2d>; + compatible = "st,stw4811"; + reg = <0x2d>; + vmmc_regulator: vmmc { + compatible = "st,stw481x-vmmc"; + regulator-name = "VMMC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; }; }; @@ -839,6 +846,7 @@ cd-inverted; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; + vmmc-supply = <&vmmc_regulator>; }; }; }; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index af7fa40fd216..fb1b2ec8eaa9 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -122,6 +122,7 @@ usb1v8-supply = <&vusb1v8>; usb3v1-supply = <&vusb3v1>; usb_mode = <1>; + #phy-cells = <0>; }; twl_pwm: pwm { |