diff options
Diffstat (limited to 'arch/arm/boot')
23 files changed, 332 insertions, 121 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 6c667fb35449..4e28d87e9356 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -470,9 +470,12 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; + fixed-link { + speed = <100>; + full-duplex; + }; }; &cpsw_emac1 { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 55ca9c7dcf6a..0467846b4cc3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -860,7 +860,7 @@ ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <7>; gpmc,num-waitpins = <2>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 6e4f5af3d8f8..ba580a9da390 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -207,7 +207,7 @@ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, <&edma_tptc2 0>; - ti,edma-memcpy-channels = <32 33>; + ti,edma-memcpy-channels = <58 59>; }; edma_tptc0: tptc@49800000 { @@ -884,7 +884,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; clocks = <&l3s_gclk>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 83dfafaaba1b..d5dd72047a7e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -794,3 +794,8 @@ tx-num-evt = <32>; rx-num-evt = <32>; }; + +&synctimer_32kclk { + assigned-clocks = <&mux_synctimer32k_ck>; + assigned-clock-parents = <&clkdiv32k_ick>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 0a5fc5d02ce2..4168eb9dd369 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -99,13 +99,6 @@ #cooling-cells = <2>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&extcon_usb1_pins>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -349,12 +342,6 @@ >; }; - extcon_usb1_pins: extcon_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ - >; - }; - tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ @@ -706,10 +693,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 3710755c6d76..85d2c377c332 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -117,7 +117,7 @@ }; /* USB part of the eSATA/USB 2.0 port */ - usb@50000 { + usb@58000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index e0ea6a93a22e..792a64ee0df7 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -4,6 +4,157 @@ * published by the Free Software Foundation. */ +&pllss { + /* + * See TRM "2.6.10 Connected outputso DPLLS" and + * "2.6.11 Connected Outputs of DPLLJ". Only clkout is + * connected except for hdmi and usb. + */ + adpll_mpu_ck: adpll@40 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-s-clock"; + reg = <0x40 0x40>; + clocks = <&devosc_ck &devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow", "clkinphif"; + clock-output-names = "481c5040.adpll.dcoclkldo", + "481c5040.adpll.clkout", + "481c5040.adpll.clkoutx2", + "481c5040.adpll.clkouthif"; + }; + + adpll_dsp_ck: adpll@80 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x80 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5080.adpll.dcoclkldo", + "481c5080.adpll.clkout", + "481c5080.adpll.clkoutldo"; + }; + + adpll_sgx_ck: adpll@b0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0xb0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c50b0.adpll.dcoclkldo", + "481c50b0.adpll.clkout", + "481c50b0.adpll.clkoutldo"; + }; + + adpll_hdvic_ck: adpll@e0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0xe0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c50e0.adpll.dcoclkldo", + "481c50e0.adpll.clkout", + "481c50e0.adpll.clkoutldo"; + }; + + adpll_l3_ck: adpll@110 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x110 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5110.adpll.dcoclkldo", + "481c5110.adpll.clkout", + "481c5110.adpll.clkoutldo"; + }; + + adpll_isp_ck: adpll@140 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x140 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5140.adpll.dcoclkldo", + "481c5140.adpll.clkout", + "481c5140.adpll.clkoutldo"; + }; + + adpll_dss_ck: adpll@170 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x170 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5170.adpll.dcoclkldo", + "481c5170.adpll.clkout", + "481c5170.adpll.clkoutldo"; + }; + + adpll_video0_ck: adpll@1a0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x1a0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c51a0.adpll.dcoclkldo", + "481c51a0.adpll.clkout", + "481c51a0.adpll.clkoutldo"; + }; + + adpll_video1_ck: adpll@1d0 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x1d0 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c51d0.adpll.dcoclkldo", + "481c51d0.adpll.clkout", + "481c51d0.adpll.clkoutldo"; + }; + + adpll_hdmi_ck: adpll@200 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x200 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5200.adpll.dcoclkldo", + "481c5200.adpll.clkout", + "481c5200.adpll.clkoutldo"; + }; + + adpll_audio_ck: adpll@230 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x230 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5230.adpll.dcoclkldo", + "481c5230.adpll.clkout", + "481c5230.adpll.clkoutldo"; + }; + + adpll_usb_ck: adpll@260 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x260 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5260.adpll.dcoclkldo", + "481c5260.adpll.clkout", + "481c5260.adpll.clkoutldo"; + }; + + adpll_ddr_ck: adpll@290 { + #clock-cells = <1>; + compatible = "ti,dm814-adpll-lj-clock"; + reg = <0x290 0x30>; + clocks = <&devosc_ck &devosc_ck>; + clock-names = "clkinp", "clkinpulow"; + clock-output-names = "481c5290.adpll.dcoclkldo", + "481c5290.adpll.clkout", + "481c5290.adpll.clkoutldo"; + }; +}; + &pllss_clocks { timer1_fck: timer1_fck { #clock-cells = <0>; @@ -23,6 +174,24 @@ reg = <0x2e0>; }; + /* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */ + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&adpll_video0_ck 1 + &adpll_video1_ck 1 + &adpll_audio_ck 1>; + ti,bit-shift = <1>; + reg = <0x2e8>; + }; + + /* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */ + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + sysclk18_ck: sysclk18_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; @@ -79,37 +248,6 @@ compatible = "fixed-clock"; clock-frequency = <1000000000>; }; - - sysclk4_ck: sysclk4_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <222000000>; - }; - - sysclk6_ck: sysclk6_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - sysclk10_ck: sysclk10_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; - - cpsw_125mhz_gclk: cpsw_125mhz_gclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <125000000>; - }; - - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <250000000>; - }; - }; &prcm_clocks { @@ -138,6 +276,49 @@ clock-div = <78125>; }; + /* L4_HS 220 MHz*/ + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + }; + + /* L4_FWCFG */ + sysclk5_ck: sysclk5_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <2>; + }; + + /* L4_LS 110 MHz */ + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_l3_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <2>; + }; + + sysclk8_ck: sysclk8_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&adpll_usb_ck 1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + }; + + sysclk10_ck: sysclk10_ck { + compatible = "ti,divider-clock"; + reg = <0x324>; + ti,max-div = <7>; + #clock-cells = <0>; + clocks = <&adpll_usb_ck 1>; + }; + aud_clkin0_ck: aud_clkin0_ck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi index 6f98dc8df9dd..0e49741747ef 100644 --- a/arch/arm/boot/dts/dra62x-clocks.dtsi +++ b/arch/arm/boot/dts/dra62x-clocks.dtsi @@ -6,6 +6,32 @@ #include "dm814x-clocks.dtsi" +/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */ +&adpll_hdvic_ck { + status = "disabled"; +}; + +&adpll_l3_ck { + status = "disabled"; +}; + +&adpll_dss_ck { + status = "disabled"; +}; + +/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */ +&sysclk4_ck { + clocks = <&adpll_isp_ck 1>; +}; + +&sysclk5_ck { + clocks = <&adpll_isp_ck 1>; +}; + +&sysclk6_ck { + clocks = <&adpll_isp_ck 1>; +}; + /* * Compared to dm814x, dra62x has different shifts and more mux options. * Please add the extra options for ysclk_14 and 16 if really needed. diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index d0bae06b7eb7..ef2164a99d0f 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -98,12 +98,20 @@ clock-frequency = <32768>; }; - sys_32k_ck: sys_32k_ck { + sys_clk32_crystal_ck: sys_clk32_crystal_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; + sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <610>; + }; + virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -2170,4 +2178,12 @@ ti,bit-shift = <22>; reg = <0x0558>; }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; + ti,bit-shift = <8>; + reg = <0x6c4>; + }; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index a2ddcb8c545a..45619f6162c5 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -91,8 +91,8 @@ clock-frequency = <141666666>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -108,29 +108,6 @@ #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - - i2c_ao_pins: i2c_mst_ao { - mux { - groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; - function = "i2c_mst_ao"; - }; - }; - spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; @@ -157,4 +134,34 @@ }; }; + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + }; + }; + }; }; /* end of / */ diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 8bad5571af46..2bfe401a4da9 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -155,8 +155,8 @@ reg = <0xc1108000 0x4>, <0xc1104000 0x460>; }; - pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8b-pinctrl"; + pinctrl_cbus: pinctrl@c1109880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -171,6 +171,14 @@ gpio-controller; #gpio-cells = <2>; }; + }; + + pinctrl_aobus: pinctrl@c8100084 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0xc8100084 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; gpio_ao: ao-bank@c1108030 { reg = <0xc8100014 0x4>, diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a96a726..d9e2d9c6e999 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */ }; &vio { diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 387dc31822fe..96f8ce7bd2af 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -46,7 +46,7 @@ 0x480bd800 0x017c>; interrupts = <24>; iommus = <&mmu_isp>; - syscon = <&scm_conf 0xdc>; + syscon = <&scm_conf 0x6c>; ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>; #clock-cells = <1>; ports { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2bd9c83300b2..421fe9f8a9eb 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -70,7 +70,7 @@ compatible = "arm,cortex-a9-twd-timer"; clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>; interrupt-parent = <&gic>; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 902657d6713b..914bf4c47404 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -472,7 +472,7 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -498,7 +498,7 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index ecc591dc0778..4d87d9c6c86d 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -513,7 +513,7 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -537,7 +537,7 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 38805ebbe2ba..120b6b80cd39 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -269,7 +269,7 @@ omap5_pmx_wkup: pinmux@c840 { compatible = "ti,omap5-padconf", "pinctrl-single"; - reg = <0xc840 0x0038>; + reg = <0xc840 0x003c>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 65d0e8d98259..04f541bffbdd 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -666,7 +666,7 @@ }; sata0: sata@29000000 { - compatible = "generic-ahci"; + compatible = "qcom,apq8064-ahci", "generic-ahci"; status = "disabled"; reg = <0x29000000 0x180>; interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; @@ -688,6 +688,7 @@ phys = <&sata_phy0>; phy-names = "sata-phy"; + ports-implemented = <0x1>; }; /* Temporary fixed regulator */ diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ef5330578431..8193139d0d87 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -460,8 +460,6 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -479,16 +477,6 @@ interrupt-controller; #interrupt-cells = <4>; }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; }; smd { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 0ad71b81d3a2..cc6e28f81fe4 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -661,6 +661,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6c08314427d6..a9285d9a57cd 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -143,19 +143,11 @@ }; &pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; - scif_clk_pins: scif_clk { - renesas,groups = "scif_clk"; - renesas,function = "scif_clk"; - }; - ether_pins: ether { renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; renesas,function = "eth"; @@ -229,11 +221,6 @@ status = "okay"; }; -&scif_clk { - clock-frequency = <14745600>; - status = "okay"; -}; - ðer { pinctrl-0 = <ðer_pins &phy1_pins>; pinctrl-names = "default"; @@ -414,6 +401,7 @@ }; &pcie_bus_clk { + clock-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6439f0569fe2..1cd1b6a3a72a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1083,9 +1083,8 @@ pcie_bus_clk: pcie_bus_clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <0>; clock-output-names = "pcie_bus"; - status = "disabled"; }; /* External SCIF clock */ @@ -1094,7 +1093,6 @@ #clock-cells = <0>; /* This value must be overridden by the board. */ clock-frequency = <0>; - status = "disabled"; }; /* External USB clock - can be overridden by the board */ @@ -1112,7 +1110,6 @@ /* This value must be overridden by the board. */ clock-frequency = <0>; clock-output-names = "can_clk"; - status = "disabled"; }; /* Special CPG clocks */ diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 9d2b7e2f5975..346a49d805a7 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -125,8 +125,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; |