summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c6
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c63
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c6
-rw-r--r--arch/arm/mach-at91/clock.c151
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pmc.h26
5 files changed, 204 insertions, 48 deletions
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index e263fda3e2d1..970fd6b6753e 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+ .det_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
.slot_b = 1,
.wire4 = 1,
};
@@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
{
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
I2C_BOARD_INFO("fm3130", 0x68),
}, {
I2C_BOARD_INFO("24c64", 0x50),
@@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void)
/* I2C */
at91_add_device_i2c(afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));
+ /* Audio */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 438efbb17482..a55398ed1211 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <linux/clk.h>
#include <mach/hardware.h>
@@ -218,6 +220,63 @@ static struct gpio_led ek_leds[] = {
}
};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA30,
+ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA31,
+ .code = BTN_4,
+ .desc = "Button 4",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA30, 1);
+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
+ at91_set_deglitch(AT91_PIN_PA31, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c512", 0x50),
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -235,9 +294,11 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a6..f6b5672cabd6 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
static void at91_lcdc_power_control(int on)
{
if (on)
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e4345106ee57..bac578fe0d3d 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi() ( cpu_is_at91cap9() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+
+#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+
+#define cpu_has_upll() (0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp() (!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
+
+
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
};
static struct clk uhpck = {
.name = "uhpck",
- .parent = &pllb,
+ /*.parent = ... we choose parent at runtime */
.mode = pmc_sys_mode,
};
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
case AT91_PMC_CSS_PLLA:
return &plla;
case AT91_PMC_CSS_PLLB:
- return &pllb;
+ if (cpu_has_upll())
+ /* CSS_PLLB == CSS_UPLL */
+ return &utmi_clk;
+ else if (cpu_has_pllb())
+ return &pllb;
}
return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
+ pckr &= AT91_PMC_CSS; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
}
EXPORT_SYMBOL(clk_set_parent);
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
static void __init init_programmable_clock(struct clk *clk)
{
struct clk *parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- if (!cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_utmi())
seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ if (cpu_has_upll())
+ seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
&clk32k,
&main_clk,
&plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
/* MCK */
&mck
};
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ uhpck.parent = &pllb;
+
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 480 MHz from UPLL,
+ */
+ unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+ /* Setup divider by 10 to reach 48 MHz */
+ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+ at91_sys_write(AT91_PMC_USB, usbr);
+
+ /* Now set uhpck values */
+ uhpck.parent = &utmi_clk;
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
- || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+ if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+ || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+ if (cpu_has_upll() && !cpu_has_pllb()) {
+ /* setup UTMI clock as the fourth primary clock
+ * (instead of pllb) */
+ utmi_clk.type |= CLK_TYPE_PRIMARY;
+ utmi_clk.id = 3;
}
- at91_sys_write(AT91_CKGR_PLLBR, 0);
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
* USB HS clock init
*/
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+ if (cpu_has_utmi())
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
- }
+
+ /*
+ * USB FS clock init
+ */
+ if (cpu_has_pllb())
+ at91_pllb_usbfs_clock_init(main_clock);
+ if (cpu_has_upll())
+ /* assumes that we choose UPLL for USB and not PLLA */
+ at91_upll_usbfs_clock_init(main_clock);
/*
* MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
- if (cpu_is_at91rm9200())
+ if (cpu_is_at91rm9200()) {
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- else if (cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9g20()) {
mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
- } else
+ } else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ }
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
+ list_add_tail(&pllb.node, &clocks);
+
+ if (cpu_has_uhp())
+ list_add_tail(&uhpck.node, &clocks);
+
+ if (cpu_has_udpfs())
+ list_add_tail(&udpck.node, &clocks);
+
+ if (cpu_has_utmi())
list_add_tail(&utmi_clk.node, &clocks);
/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33b8a9a..64589eaaaee8 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
@@ -72,6 +72,7 @@
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
@@ -88,12 +89,25 @@
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-#define AT91SAM9_PMC_MDIV_6 (3 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
+#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
+#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */
+#define AT91_PMC_PLLADIV2_OFF (0 << 12)
+#define AT91_PMC_PLLADIV2_ON (1 << 12)
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
+#define AT91_PMC_USBS_PLLA (0 << 0)
+#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
+#define AT91_PMC_CSSMCK_CSS (0 << 8)
+#define AT91_PMC_CSSMCK_MCK (1 << 8)
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
@@ -102,7 +116,7 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 21:50:48 +0100